New page in smart forms

Hi,
I have requirement of displaying each record of an internal table on individual pages.When iam trying to include command line inside the main of table its giving error saying explicit page breaks not allowed.Any pointers regarding this plzzz.
Thanks and Regards,
Rajashree

Hi Rajashree,
I have just tried the same on our system without any problem. How did you exactly define your page break?
Regards,
John.

Similar Messages

How to print different header & item data in new pages using smart forms.

Hi,
In smart forms I am trying to print header data & their item data. But there are more than one header data for a given input.
I want to print all the different header data with their item data in new pages using smart forms. Can any one please help to solve the issue.. Its very urgent for me..
Regards,
Brajesh

Hi
U need to use control break statements to acheive ur requirement.
Regards,
Priya

How do u get New page in Smart form dynamically

How do u get New page in Smart form dynamically

page break in smart form
Re: New Page in Smart Forms
Page break inside a loop in smart form

**To branch to a new page in Smart forms after main window**

I have three pages where on second pages main window so my data many be carry on next 3, 4, pages and my requirement is to display data(like notes ) on last page after all contain of main window .that last third page is different formatting on basis of company code lets 10 different pages. On second page in main window I write u2018commandu2019 and General Attributes, Tick Go to new page in. On the Determine the new page using the list box next to the checkbox. The output of the main window will continues on the new page of third pages. I did this for my all company like (command for 10 , command for 11u2026.).BUT also on second page option of next page in General Attributes. Where in can maintain next pages entry is single...if I put blank the error comesu2026thingu2019s 1) what should I have to maintain in second page for next page.
2) how I get data from multiple page design (I design 10 pages from that I want one should display):- I used condition option in command for company still getting error .
So kindly help me for such scenario.
Edited by: nshahare on Aug 5, 2011 4:07 PM

Hi nshahare ,
Format the way you have asked the question, It is highly unclear what issue you are facing.
Be clear, be cool and then post(edit) the question again. we are here to help you.
BR
Dep

New page in smart form when displaying internal table data in table

Hi ,
My requirement in smartform is like
I'm using the tables to display the internal table data in main window .
based on SORTF field in the internal table ,when SORTF field value changes all the related to that SORTF value should be displayind in the new page.
Please anybody tell me that , how to do this?
Thanks
Naveen

Hi Navi,
    Try this Logic.
1) Go to Smartform,
2) Declare a flag variable w_flag type c
3)Go to Main Window
   a) Go to table
   b) Create one more Table Line
   c) Create a CODE Line in that.
       write inside CODE as Below:-
             CLEAR: w_flag.
             ON CHANGE OF w_final-sortf.
               w_flag = 'X'.
              ENDON.
   d) Create one COMMAND Under CODE line created above.
       click on check Box "Go to New Page" ( Page1 or Page2 or give as reqd ).
       click on conditions tabe of COMMAND
       write: w_flag = 'X'.
Hope this will work
Reward Points if Useful
regards
Avi.............

Repeat Line item prints on every new page of smart form of Service PO

Dear Sir,
I am facing following Problem & need abaper help.
example:-
PO type is Service
Line item 10. Transportation 1 AU
under this activities
          01. Transportaion by Tree wheeler 3 Rs/ KM
          02. Transportaion by Four wheeler 8 Rs/ KM
          03. Transportaion by Heavy vehical 10 Rs/ KM
Line item 20      Errection     1 AU
Sub services are,
        01. Errection of Boiler   200 RS/Hr
Like this way
Now I am seeing Print Preeview
Suppose line item 20 come in second page , in this case system copies sub services of firs line item
example : - system shows line item 20 in second page as shown below which is wrong.
Line item 20      Errection     1 AU
           01. Transportaion by Tree wheeler 3 Rs/ KM
          02. Transportaion by Four wheeler 8 Rs/ KM
          03. Transportaion by Heavy vehical 10 Rs/ KM
Pls, suggest where I need to change.
Regards,
Ravi

hi ,
i think you are not clearing the Barcode variable once it has printed.
try declaring the variable like this in smartform,
BARCODE     TYPE     CHAR24
when one loop excecutes .and end of loop in command line clear this variable.
thanks & regards,
kat.

How to know no of pages in smart forms to be printed ?

Hi,
How to know no of pages in smart forms to be printed ?
though i got SFSY structure during run time of smartform , even that was not useful.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
for that Page &SFSY-PAGE& of &SFSY-FORMPAGES&
during debug of smart form i don't understand how it is calculating no of pages ,as i kept break point before printing page no in smart form.
please check my two screen shots, sfsy-formpage still contains current page no only but not total no of pages.
Help Required.
Thanks In advance.

Hi Prakash,
You will not get these values during debugging.. Let the program execute completely, you will get the right values.
As Manish said, the value for &SFSY-FORMPAGES& will be known only after all the pages are processed, though it is not necessary that you use them in the final window only. It can be a text node in a window of any type.
You will get the desired output, just cant see them during debugging within the program. At the time of printing or in the print review, output would be as expected.
Also, FYI, it would be better to give total pages as &SFSY-FORMPAGES(3ZC)& as there can be error if the total number of pages exceeds 9, due to lack of sufficient space to print more digits

How to create new page in adobe form.

how to create new page in adobe form.

Hi
First Go To Layout.
On Hicherchy Platte , rightclick on Subform and select option new body page.
This way you can create body page for the particular subform.
if you want to create master page , right click on page 1 and select New master page.
Hope this will helpful to you.
Rewards if useful.
With Regards
Nikunj Shah

How to mention two different next pages in smart forms

Hi
In our scenario there is smart form in which we have one main window, after that we need to print two different pages one for instructions and other for delivery address.
In main window we can add a command and mention the condition for a next page e.g Instructions page. but for delivery address page we are unable to specify condition in main window or in secondary window in instruction page/main page.
Kindly help us
Regards
Ammad

Hi Ammad,
Create two pages(page2 and page3), page2 for printing the "Instructions" and second(page3) for "delivery address".
in the first page, at the end of main window create the command and specify as below
general attributes->check the go to new page check box->choose the page which u wanted to be print on the second(for your case it is page2).
In the page2->general attributes->next page->give "page3".
Thanks,
Prabhakaran
Edited by: prabakar1998 on Dec 12, 2011 9:42 AM
Edited by: prabakar1998 on Dec 12, 2011 9:44 AM

How to supress a blank page in smart forms

Hi,
I am using a command in Smartforms to trigger a new page whenever a new BELNR(Accounting document). My problem is in the output i am getting a first page is blank and remaining pages are ok.
What i did Is In conditions tab i written as temp NE belnr. So first time temp is nothing so blank page is coming. and in the following text elements i am passing a belnr value to the temp.
Temp = belnr and in general attributes go to new page check box has been activated. Then how to supress a blnk page.
Regards
Ramakrishna .P

Hi,
I am not using loop.
In main window i have the contents as
Header---- Headers for table
Main Area---- text elements ( i have fileds slno, belnr,glaccount,cost center,gtext,description,dmbtr,wrbtr)
In belnr field i have created the command there i am comparing the condition temp ne Belnr and go to new page on conditions tab
wrbtr text element i am passing the g_temp =belnr
My requirement is whenever new belnr comes new page has to trigger and corresponding gl accounts need to be displayed and end of the belnr i want to display the footer.
For your information passing the belnr values from the print program (select options) to smart form
Footer---footer

Dynamically call different pages in smart forms

Hello Abap Gurus:
I am creating a smart form for cobra letters, in which i need to display one letter for hourly employees, and other for salaried employees.
For example in my variant if i have two employees one salried and other hourly then my cobra letters should print different letters for salried and hourly employees.
Any suggestions are helpful.
Thanks,
Ratna.

Hi,
I am assuming that before coming to the Smartform you know the Status of the Employee. May be you can get the status from the Smartform Interface Parameters or else set the Variable (Used for comtroling the page printing) in the Driver Program and Import that variable to the Smartform.
Now once 4 letters are printed after the 4th Letter Create a New Page Command and Check the New Page Check and give Page as "5th Letter Page Name" and Under the Condition Tab give your Variable Name with the Set Value.
Similarly follow the same process for 6th Letter.
I suggest to set the Variables Values in Driver Program and IMport this Variable to the Smartform unsing the Form Interface.
Under the Condition Tab V_GROSS_HRLY(Say Identifier) NE ' '. This is will take of Printing the New Pages. I think this logic should work.
Let me know in case if you face any problem on this.
Regards,
Srinivas

Blank pages in smart forms

hi am working on smartforms i developed a smart form in which i designed a selection screen it will take run-date and run-id from the user and displays vendors address iten details and description and amount after tht cheque will be printed.
   giving the adress and item details of each vendor in one go.
in my test data , three vendors are comming one is having 16 line items and the other 5 and 3 now i want to put a condition i want to pick only those vendors who r having more than 10 items .
so am using a codition on address window main vindow
i declared
data: V_LINES(3) type c.
describe table it_regup1 lines V_LINES.
and in the conditins options i gave
   v_lines ge or eq to 10.
so only one vendor is displaying but two blank pages are
how to supress them
pls let me know
cheers
uday

hi thanks for the reply
there is only one page
first one address winow is there here am displaying vendor name1 name2 street postal code and all.
in the main window there is a dynamic table for line items in tht regup-xblnr and sgtxt and regup- dmbtr is comming below tht am printing a cheque . in a preprinted format
and tht is fine.
   i put a condition in it tht if line items more than 10. am displaying a text for tht particula vendor 'please see the enclosed attachment'. n its over
   in the second smartform am picking only those vendors who has line items more than 10 and am not printing the cheque as in the first one it will be printed..
   so here i put a condition in the command line
greater than or equal to 10. so only those vendor who's having more than 10 line items are comming but the problem is          in my test data there r three vendors one with
16 items other with 5 and 3
so for the first vendor everything is fine and it is showing
as the window can hold only 10 its going to the new page thts what i want but after tht its showing blank two blank pages   thts the prob
hope u got my prob if not pls revert back
cheers
uday

How to creat 2nd page in smart forms

hi
in smart forms iam facing problem i'e if i gave 10 material's it was comming fine if i give 30 materials it was going to 2nd page in that again from starting it was comming like Header delivery adress.
what i want is if materials increase than main window should increase size & rest of thing(footer )should comes in 2nd window
regards
A K reddy

Hi,
For the header details not to print on the second page:
-> Go to Conditions tab of the window in which u r printing Header delivery address and check the condition 'Only on first Page'
This will solve ur problem.
thanks,
Anon

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

Issue in printing second page in smart form

in my smart form i have only FIRST page in tht i have pur order numberwindow, date window and all the item details in mainwindow. my problem is in my page 1 order number and date are getting printed at the exact position whre i want but when it is coming to the next page that is page 2 order number and date are going out of scope. I cant even change the position of those two windows as it is getting printed properly on 1st page.

Copy the first page and paste so as to create a second page, now give next page as this second page, and check, if there is any layout issue then make changes in this page, be careful as if you make any any changes, such as deleting some table or template or window in the copied [page it will get deleted in first page to, so only make changes to layout.

New page in smart forms

Similar Messages

Maybe you are looking for