New Page numbers for Sections in Pages 5.2

Hi, I can't figure out to how to start numbering pages from 1 in a new section using Pages 5.2.
I've tried to add new sections via both the Inspector and Insert > Add Section Break, but when I attempt to insert page numbers in the header of a new section, it's still not starting at 1.

See what I mean? I've successfully created the new section, but it still wants number the first page of a section with 2.

Similar Messages

  • Can not get correct page numbering for sections

    I have created a RTF template for a report that is Burst by USERID and then on the template I have the DeptID as the section for the report. When I run the report I get page numbering by DeptID - so if 1 department has 2 pages I see page 1 of 2, 2 of 2, then the page numbering starts over for the next department. I actually want the report to show a total number of pages for the entire report in the header. Any ideas on how I can accomplish this? Thanks!

    Vetri changed the template to have the body start prior to rows that I wanted repeated on all pages and then copied the repeated rows on the second page. This allowed for my page break between departments to happen and the page numbering in the heading also included the total number of pages not the total pages for each department.

  • Reset Page Numbers for each group with XMLP 4.5

    I am currently working on the invoice report rtf template using XMLP 4.5
    We cannot upgrade to new version at this stage.
    Our requirement is, i want to reset the page numbers for each invoice. I know that it can be achieved using @section. I think this will work only XMLP 5.0 and after. Is there any other way to achive this requirement?
    Our reports are moving to production in another 3 days.
    I would be thankful If anybody can provide me the solution for this problem?
    Thanks
    Babu

    Hi Tim
    Thank you very much for your suggestion. We have upgraded to latest version of XML and now i am using @section to reset the page numbers for each invoice. This is working fine. But i have stucked to print the invoice copes for which page numbers should be reset.
    As per the client requirement i need to generate the invoice report with 3 more copies where COPY word will be there for duplicate invoice copies.
    I have written the rtf template logic like below:
    ex: <?for-each@section:G_INVOICE?>
    Invoice Information
    Invoice first copy information with COPY word (just copy the above original invoice layout and pasted)
    Invoice second copy information
    Invoice third copy information
    <?end for-each?>
    This is working fine. But client is demanding that all the invoice copies page numbers should start with 1. I tried by giving the @section for each invoice copy. But it was not working. Is there anyway to reset the page numbers for each invoice copy (anyway orginal invoice page numbers are resetting becuase i have used @section). It would be great help for me by providing the solution for my problem.
    Thanks
    Babu

  • Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages - what the **** is going on???

    Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.

    You can not insert a section break into a textbox.
    You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
    I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
    Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
    You may find this a usueful resource as well:
    http://www.freeforum101.com/iworktipsntrick/
    Peter
    PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating.

  • Page Numbering for the Clueless N00b -- FrameMaker 7

    Hey gang,
    I've got a fairly simple FrameMaker 7 document (one file, 94 pages) that requires page numbers to follow the Chapter No. - Page No. format (e.g., 3-2).    Two issues occur: 1) the chapter number stays at 1, and 2) the page number increments by one when I need it to restart after every new chapter.
    My paragraph tags are like this:
    ChapterTitle
    Heading1
    Heading2, etc.
    I think I've identified a disconnect: the heading numbering is as follows (thanks to Deborah Snavely for explaining the matrix approach):
    <n+>< =0>< =0>< =0>< =0>< >< >\t
         where n+ is the heading number, followed by four subheadings.  The last two bracket sets are for figures and tables, respectively.  I set the page numbering in the master pages as follows: <$chapnum>-<$curpagenum>.  Chapter/paragraph numbering works as advertised, as do figure and table numbers.  How do I change the page number variables to match the chapter number and restart the page numbering?
    Regards,
    -terry-

    You need to set the appropriate numbering behaviours in the book file for each of the chapter files.
    Highlight a file in the book file.
    Right-click to get the context menu.
    Select Numbering...
    Set the Chapter and Page numbering tabs to behave as required.

  • Dynamic Page Numbering for DPS documents

    Since we don't have just 1 document for the entire publication; is there any way to have a footer that has the page number in any way? (without having to manually update every page?)

    Use the book feature.
    But it is difficult to number your publication if you have vertical and
    horizontal pages.
    And why do you need page numbers anyways? Digital has hyperlinks and scroll
    bars for solid navigation
    (mobil gesendet)
    Am 09.01.2012 19:03 schrieb "blasto333" <[email protected]>:
       Dynamic Page Numbering for DPS documents  created by blasto333<http://forums.adobe.com/people/blasto333>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4126818#4126818>

  • HT201260 I have OSX 10.5.8. I want to download Pages & Numbers for that version. ow do I get the correct version?

    I have OSX 10.5.8. I want to download Pages & Numbers for that version. How do I get the correct version?

    Buy an iWork 09 DVD from a source such as Amazon or eBay.
    (90971)

  • How do you get iBooks Author to show page numbers? (All my pages are in blank layout.)

    I'm using iBooks Author 2.0 to make a picture book and can't get it to show page numbers. The "insert page numbers" menu item doesn't highlight when I'm creating a page, nor does a number magically show up when I preview the book on my iPad. Please help?
    It may have something to do with how I'm using the ToC (tried to avoid having a ToC, but that's not working out too well. Any suggestions on how to do that with a picture book would also be helpful.)
    Thanks,
    C

    Thanks K T, This definitely got page numbers to appear.
    Now I actually have to read the iBooks Author support to figure out what I'm doing wrong with the whole Section/Chapter template thing. (It would be nice to just have a simple picture book template. Not to complain.)
    Thanks for your technical support across so many issues.
    C

  • How to add two different page numbers in a single page

    How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

    It's quite complicated, see
    Two Page Numbering Schemes in the Same Document.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • "Ghost" page numbers on every second page - how to remove?

    Hi,
    I'm setting a short book with Pages and after importing from Word, I'm seeing duplicate, partially hidden additional page numbers on every second page. I'd like to remove them entirely, keeping Pages' page numbering. Removing and inserting page numbers doesn't help and the second set of numbers can't be selected in any way (clicking, dragging don't work). One solution would be to re-import from word, deselecting page numbers beforehand, but I'd rather like avoid this step as I made many changes in Pages.
    Here's a screenshot showing the duplicate page numbers: http://dl.dropbox.com/u/3304376/pages_bug.png
    Does anybody have an idea how to remove them?

    Hello,
    Sometimes in the process of importing from Word, page numbers are improperly converted to Master Objects or Background Objects. Go to Format > Advanced > Make Master Objects Selectable. Then, with the cursor in the Margin of the document, press the Command Key (Cursor changes to an Arrow) and drag the cursor diagonally across the page number to select it. Then press the Delete key and the number should be gone. You need to check carefully to make sure that you have eliminated all the instances. There may be one per Section.
    Jerry

  • Page Numbering: Image bleeds over page number

    I tried to send the image to the back, but once you have page numbers on a Master Page is there a way to have them all view over images that bleed off the bottom?
    Thank you
    Donna

    > however this program should have had an overlay feature for numbering.
    Criticizing PM for any shortcoming is like criticizing a typewriter for
    not being a word processor.
    PM is a dead application that has seen ZERO development for the better
    part of ten years and will not see one minute of further development.
    If you want a full featured pagelayout application it's time to move to
    InDesign and take advantage of Adobe's upgrade price from Pagemaker.
    Bob

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • Create sequential numbering for chapters in Pages

    Can anyone tell me how to create sequential numbering for my 'scenes' or 'chapters' when writing scripts in Pages.
    I need to have them set up, so if for example, I have...
    Scene 01
    Scene 02
    Scene 03
    and down through scenes to say...
    Scene 52
    But I write another new scene in between scene 02 and 03... I need all the other scne numbers to change automatically below the new scene, instead of me having to manually go through and change every single scene number...
    How do I do this?

    Thanks... this is a reasonable compromise, which I have already done.
    The problem with script writing is that the Scenes are generally headed like this...
    Scene 22: Int - Dinning room - Night
    Then they might have a subtitle, which is a short descriptive of the scene, such as...
    Scene 22: Int - Dinning room - Night
    (Xmas Turkey dilemma)
    So, it could work as you suggest, but it is by far a perfect formula, I am dumbfounded as to why 'Pages' doesn't have this simple function, when just about every other word processing program does. Final Draft is an industry standard for script writing, but I actually prefer Pages, I have a lot more creative control with formatting, except for this one vital function... darn!
    Thanks for you suggestion Peter,
    Cheers

  • Is there any way to display document page numbers and section page numbers at the same time?

    Hi, I have different sections within my document starting the page numbering at 1. Besides the section page numbers I would also like to display the actual document page numbers in the header (eg. you are on page 10 of the document and page 4 of the section). Is there any way to do that? Thanks

    You can maybe use the Find/Change
    Command+i
    See if that can work for you.
    But like Steve said it is good practice to use Paragraph Style whenever you have lots of Type, I just get lazy sometimes.. lol
    Thanks

  • Dynamic page numbers for PDF.

    Hi,
    How to give starting page number for PDF. If i need to start page number from 3 how can i do this ?
    if i need to give randome page number best way to give it?
    Following is the example
    i have 6 page document.
    the page number for the documents should be 3,4,5,9,10,13.
    Thanks in advance...!!plz help me ..!! 

    i would like to give exact senario
    I have document which has 10 pages.Each page has page number on it...
    There are 3 sections.First section is from 1st page to 4th page and second section is from 5th page - 8th page,second section has flowable content.For the second section we might get till 6th page or 7th page or 8th page.If we get till 8th page there will be no problem.If it ends at 7th page the page numbers sequence should be (1,2,3,4,5,6,7,9,10) But section 3 should start from 9th page.
    Thanks in Advance

Maybe you are looking for