New palm 700wx won't appear on computer during HotSync

I received a refurbished Palm Treo 700wx (used to have a Palm Treo 700 Palm-based) phone. The photos from the old Palm transferred to folders on my computer, which uses Windows XP Pro. How can I get the photos from the 700wx to transfer to the computer?
Post relates to: Treo 700wx (Alltel)

Since the 700wx is a Windows Mobile based phone, you don't use Palm HotSync as the way to transfer data.  Instead, you use MicroSoft ActiveSync!
Do you have this installed on your computer?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • IPhone 4s. IOS 7.1.1 Windows 7. Using same lead and usb socket. From yesterday my phone won't appear on computer. Will charge via usb lead. Dont have iTunes on this computer and never had.

    iPhone 4s. IOS 7.1.1 Windows 7. Using same lead and usb socket as always. From yesterday my phone won't appear on computer. Will charge via usb lead. Dont have iTunes on this computer and never had. Am now being asked if I trust this computer. This is new. Also takes longer than usual to signal it is charging. Get usual sound notification but nothing appear in computer. I long ago disables automatic notification that phone was connected. Prefer to bring it up manually.

    Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.
    Within the Calendar app, tap Calendars at the bottom center of the screen. Tap on Show All Calendars.

  • New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

    New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

    Have you tried here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not forget the Additional Information topic.

  • New palm TX won't respond

    my new palm tx stays on and shows me the palm powered window over and over; it does not turn off with power button, won't go to home when home button pushed; please help; i have done soft reset and warm reset over and over
    Post relates to: Palm TX

    You need to try a Hard Reset.
    To perform a Hard Reset: (Palm Knowledgebase article #887)
    While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
    You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
    Have you installed any third-party software on the device?  Did you send old data from a previous Palm device to it?
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Palm Centro won't connect to computer

    i have a major problem and i have no idea how to get it fix. yesterday when i connected the USB core to my Palm Centro from my Windows computer using HotSynce it worked perfectly but today it is not connecting to my computer.???.. any idea why it does this or how i can get this problem fix?
    thanks

    I got it to work. Dont know how..but it did..

  • 3 of the 9 thumbnails in the new tab window won't appear after Firefox update.

    I've waited until the page stops loading and it still won't appear. It works if I change the site. The 3 sites in question are Facebook, Pinterest, and Sidereel. I haven't changed any settings on those sites. I'm stumped.

    This is a known bug https://bugzilla.mozilla.org/show_bug.cgi?id=756881

  • New ipod touch won't appear in my itunes or on my computer

    I got an ipod touch for christmas and it just will not show up under devices when i plug it into my itunes. it wouldnt activate at all, so then i used my brother's laptop. it finally activated but asked to be "restored to factory settings" first. my friends with ipod touches didnt have this happen to them. so i put some music on it from my brothers laptop and i can surf youtube and whatnot, but when i plug it into my computer, itunes does not pop up, it does not show i have something in my edrive, it does nothing. it is a dell with windows xp. i do have the latest version of itunes (8.0.2) the cable is good... i dont know what to do!!

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod touch not recognized in iTunes for Windows
    iPod touch: Basic Troubleshooting

  • Brand New Iphone 4 won't appear on device listing

    I've just got a new iPhone 4 and I plugged it in to my computer to initially register it for use but my computer would read the phone but iTunes wouldn't register it on the device list.
    I brought it to work today and it worked fine. Came home and tried a number of things such as removing iTunes and not restarting etc. I've been at it for nearly 2 days now and I'm none the wiser. I've just got no idea what to do with it. It charges on the computer, it appears on the computer as being an iPhone but iTunes won't do a thing with it.

    I bought it custom built from overclockers and it only had the operating system and updated drivers with it. I don't think it could be that. I've looked after it well. My friend had a jailbroken phone registered on my iTunes for awhile would that have had any conflict with iTunes for future devices connected to it at all?

  • New hard drive won't appear as destination for software reinstall

    I have a macbook I bought in 2006. My 60G hard drive was failing so I purchased a new 320G and installed it myself. The online manual had good instructions for pulling the old hard drive out and putting the new one in, but skipped the part where I apparently had to swap the protective metal cover from one to the other. I did that myself. I didn't peel any stickers off the new one.
    Now I'm using my old installation disks to reinstall Mac OS X v10.4, but when the screen appears that says "Select a destination volume to install the Mac OS X softward" there's no destinations to choose from. How do I get my computer to recognize the new hard drive?

    You need to initialise your new disk by "Erasing it" and choosing the "Mac OS Extended (Journaled)" format. You can do this using Disk Utility while booted from the Instal DVD, see Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD.
    EDIT Adrian is obviously quicker on the draw
    Message was edited by: Michael Conniff

  • Palm TX won't connect to computer via WiFi for Hotsync

    I've tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even when I put in the IP address.
    My wireless network sees the Palm and I am able to access the Internet through it, but it won't connect to my computers. Any suggestions?
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    Here's my Wifi Hotsync help file:
    Wifi HotSync with a TX
    1. On your PC, locate the HotSync Manager (little HotSync icon in the lower right tool tray on a Winbox). Click on it and check off "Network", then click again and select Setup.
    2. Pick the Network tab up top in the window that opens, and find your HotSync name in the list. Make sure it's checked.
    3. Tap the TCP/IP button, and look at the IP address listed for "Primary PC Address". Write it down.
    4. Turn on Wifi on your Palm and connect to your router.
    5. On your Palm, select the HotSync program and tap the word "Network" above the HotSync icon in the middle of the screen. Below it, enter the IP address you wrote down in step 3. (Include the periods!).
    6. Tap the big HotSync icon above the IP address, and hold on!
    7. If you're holding on, and nothing happens try a wired HotSync, then try the Wifi HotSync again. Sometimes, information has to transfer from your PC after you check off the Network option. Also, be sure to watch for any Firewall activity asking you about "HotSync.exe is trying to access your hard drive" etc. You may need to set a rule to allow it.
    On your TX, check these settings from the pull-down menu in Hotsync:
    Modem Sync: Network
    LanSync: :LANSync
    Network Setup: (Wifi should be listed as one of the networks)
    WyreNut
    Message Edited by WyreNut on 11-02-2008 10:59 AM
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • New iTunes update won't recognize my computer

    I just uploaded the new iTunes update for my pc and when I go to play a song I get a message saying that this computer is not authorized to play my iTunes songs.  So I enter my password to "authorize" this computer and a message comes up saying that the computer IS ALREADY authorized.  But it still wont let me play my songs.  I even tried to deauthorize this computer and re authorize it and I still get the same message.  Can't seem to find a button that will allow my undo the last update.

    Nevermind.
    Had to delete the purchased song. Sync my ipod with my computer. redownload the song and BOOM GOES THE DYNAMITE. I can listen to the song through my pc and dont have to keep reauthorizing my computer

  • New IMAP account won't appear on Apple Mail and yet wipes server

    I have a problem with Apple Mail and a new IMAP account I've created.
    I have one IMAP account (mail@*.com) which works fine and then recently I created a second IMAP account on that same server (property@*.com). I copied the details from the server to Apple Mail and yet as soon as I set up the account on Apple Mail then the test mails I send vanish from the server and do not show up in Apple Mail. When I remove that account on my Apple Mail then I can send messages to via webmail which show up on the server again.
    Similarly when I use Thunderbird as my mail client then the property@*.com IMAP mail shows up fine.
    Is there some conflict with having two IMAP accounts from the same server? is there any way I can get round that - set up an alias to have my property mail hived off to a different account / or even folder?
    I would appreciate help... although I notice that 4 out of 5 of my last posts didn't get answered...
    Alistair
    <Edited by Host>

    It's a bad idea to post your email addresses - it's an invitation to spam - and I've asked the Moderators to remove them.

  • New palm pixi won't receive at&t texts

    just activated new pixi.  love the phone but one strange problem.  can send and receive texts from everyone except at&t.  the texts i send are received but reply shows up as an "empty" message with "no summary"...no message although it shows up as a reply from the user sent text to.
    any ideas?

    floridarandy wrote:
    just activated new pixi.  love the phone but one strange problem.  can send and receive texts from everyone except at&t.  the texts i send are received but reply shows up as an "empty" message with "no summary"...no message although it shows up as a reply from the user sent text to.
    any ideas?
    Hello. 
    I almost understand what you're saying, but not quite.  Can you be a little more detailed (especially since I've not seen this issue from anyone else yet)?
    You can send to AT&T customers, but when they reply it shows up on your pixi as ???
    Do original (ie, originating from AT&T customers) sms messages show up ok?
    Etc, etc.
    Finally, you mention Pixi, but you device shows as Pre Plus... which device are you using? 

  • 5G iPod won't appear on my desktop or iTunes using USB 2.0

    My new 5G iPod won't appear on my desktop or iTunes when I have it connected to a new 2.0 USB card in my G4 733. I know the USB card works because my old iPods work through it. My new iPod only will work through the old USB 1.0 port. I've reset it (with it attached to the computer) and done all that Apple says to do.

    I am having a similar problem with my Nano. Shows up in itunes, but freezes up under USB 2.0. Other devices work fine on the card, usb 1.1 has no problems, and if I update music on my nano on the 1.1 port, and then plug it into the 2.0 port I can still update Calenders onto the iPod via iTunes.
    Also, i applied the ipod updater and since this was happening under Panther, upgrading to Tiger made no difference, so I can't see this being a software error.

  • Palm centro won't ring

    For some reason my new palm centro won't ring, show any missed calls, or let me check my voicemail at home, even though it shows all bars and appears to have network service. I can, however, do all of these things in other locations.
    I was on the phone w/ tech support for 45 minutes trying to get to the bottom of it and they said I should consider having it replaced where I bought it. But I've been reading online complaints from others who have gotten replacement phones and are having the same problems so I don't want to replace it if that won't address the problem. 
    Does anyone know how to fix this?
    Thanks,
    ross
    Post relates to: Centro (AT&T)

    Hi, and welcome to the Palm Community Forums.
    For some reason my new palm centro won't ring, show any missed calls, or let me check my voicemail at home, even though it shows all bars and appears to have network service. I can, however, do all of these things in other locations.
    As I understand your situation, the phone works correctly (it rings, shows missed calls, and lets you check voice mail, etc.) in locations other than your home.  When you get home, these things no longer work?
    Are you able to make any outgoing calls from your home?
    Post relates to: Centro (AT&T)
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

Maybe you are looking for

  • How do I manage multiple iTunes users on the same PC?

    Hi- I'm new to iPod and iTunes. We have 3 iPod's in our house but only 1 PC. How can I set up iTunes so we can all manager our music separately? Thank you!!

  • SQL question that's always bugged  me

    SQL> select * from customer where customer_id = 4; no rows selected SQL> select max(customer_id) from customer where customer_id = 4; MAX(CUSTOMER_ID) SQL> WHY!!!!! This has been driving me nuts, for the past hour or so trying to hunt down a bug in s

  • N97 RSS automatic updates

    Hi, I'm using only WiFi to connect my N97 to the internet. I've set both my home and work access points in the Internet connections.  I've set up an RSS feed in the phone's browser, and I want it to automatically update. The problem is that I have to

  • What is the life expectancy of M

    My 3 year old MuVo N200 has been experiencing difficulties over the last month or so. Currently, the display screen displays only the Creative logo. I know that there is music loaded on there, but that does not play either. I have already tried repla

  • I face 1 interview question: what is the most complex Crystal reorts u made

    Hi, i faced one frequent question in interview s ? wht is the most complex crystal reports you ever been made ? can any one hlep me how to describe this answer ... Thanks.