New patches broke our transforms?
Hi all,
After applying the patch set, we now get this error when performing an SDO_CS.TRANSFORM()
ORA-29400: data cartridge error
ORA-30625: method dispatch on NULL SELF argument is disallowed
ORA-06512: at "MDSYS.SDO_CS", line 927
ORA-06512: at "MDSYS.SDO_CS", line 79
ORA-06512: at "MDSYS.SDO_CS", line 116
The query is:
SELECT order_id, sdo_cs.transform_orig (area, 8307)
FROM my_polygon p
WHERE p.area IS NOT NULL;
Area is stored in a custom SRID we've defined locally as 9000001. This exact same data works in our dev environment withOUT the patches.
Anybody have any ideas? Thanks in advance!
ENVIRONMENT DETAILS:
Production versions:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
Dev versions:
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Productio
NLSRTL Version 10.2.0.3.0 - Production
Was a solution ever found?
Thinking we just hit this same issue.
We just upgrated from 10.2.0.2 to 10.2.0.4 RDBMS.
Similar Messages
-
Hello,
Oracle has released the new patch set 11.2.0.2.0 for Oracle Database whose installation deviates from the previous patch set instructions. Are there any new deployment procedures available to do an in-place upgrade? We have a lot (about 100) of development databases here, most of them do not have enough hard disk space to do an out-of-place upgrade, so the need for updated deployment procedures is definetely there.
Best regards,
AndreasHello Hemss,
I am trying to do an in-place-upgrade (replacing the old Oracle software completely because our test servers have only very little space). When you want to perform an out-of-place upgrade, things are more simple, but you need the disk space for a new Oracle home (about 6 GB on Linux-x64 in my case). Essentially, the steps are:
1. You can keep the production database online during the next steps
2. Install the new 11.2.0.2.0 into a new Oracle Home (an Oracle software directory which does not exist yet). Only install the software.
3. Apply any post-11.2.0.2.0 patches if available and needed
4. Schedule a maintenance window with your users
5. Put the original database(s) in MOUNT mode (SHUTDOWN IMMEDIATE followed by STARTUP MOUNT)
6. Perform a FULL backup of both database and old Oracle home, just to be on the safe side.
7. Set your enviromnent: ORACLE_HOME and ORACLE_BASE should point to your NEW installation, ORACLE_SID to your production database.
8. Start netca to create a new LISTENER for your new software installation (you might want to use a different port than your previous installation in case you need to run both at the same time)
9. Start dbua from the new Oracle Home and follow the on-screen instructions. You can either create an updated copy of the database (needs more disk space but you can easily switch back to your orginal DB), or you change the database to fit your new Oracle version (needs less space, but you need to run the scripts to downgrade to the old release if you need to go back)
So, as long as you have plenty of disk space, things are not that difficult at all. Of course, you should always read the release notes and the full installation guides for the new version because there might be new features or behaviours that affect your database. It is also highly advisable to test this on a completely different machine first.
You can find the complete upgrade guide here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/toc.htm
Best regards,
Andreas -
New patch releases: JE 5.0.48 and 4.1.20
All,
Please note that new patch releases for JE 5.0 and 4.1 are now available.
The JE 5.0.48 update contains a number of critical bug fixes that can cause corruption (data loss) under certain circumstances. We strongly recommend that anyone using JE 5 upgrade immediately to 5.0.48. This update also contains fixes for issues that prevent upgrading to JE 5 from an earlier release, or cause problems after upgrading.
Note that running the pre-upgrade utility is mandatory before upgrading to JE 5 from an earlier release, and the pre-upgrade utility must be run using JE 4.0.20. The JE 4.0.20 update contains fixes to the pre-upgrade utility as well as one critical bug fix. See the first section in the JE 5.0.48 change log for detailed information on upgrading and running the pre-upgrade utility.
We'd like to thank all the users who reported problems and especially those who worked with us over email, in some cases for long periods of time, to diagnose problems and test fixes. Some, but not all, of those who helped are mentioned in the change log. Thank you for contributing to the reliability of the product!
Complete information can be found in the JE documentation. The release is available via the download site or Maven.
--markHi,
the biggest problem is that we are using bought application not made in our company. I have tried out this java application with JRE 1.4 and 1.5 and it just doesn't work. So the only solution is using JRE 1.3 on all intranet computers. This application uses digital certificate so why doesn't Sun allow digital signet java programs to run on older versions of JRE?
There could also be one more solution. I exactly know md5sum (or sha1sum) of 3 JAR files used by applet needing JRE 1.3. So if this sum would be enabled manualy (or I could send batch file to make this in registry or any other storage this would be good).
http://en.wikipedia.org/wiki/Md5sum
http://en.wikipedia.org/wiki/Sha1sum
Thanks,
Grofaty -
Microsoft KB2992611 broke our Vibe access from IE
Microsoft KB2992611 broke our Vibe access from Internet Explorer.
We're running Vibe 3.4 on Windows 2008 R2.
If there's a fix (aside from uninstalling that patch), please let us know.
Thanks,
MarcMicrosoft KB2992611 is an update for your Win2008 server, right?!
Can you provide more details on what exactly got broken? Accessing Vibe via the web interface via IE? Which version? What's the exact error message and/or behaviour?
Does it work via FF or Chrome? How about Vibe Desktop etc.?
Erik -
Can't login into NW after a new patch.
Hi experts.
Yestoday I installed a new patch KB70010,after that use command SGEN to compile all source in component BASIS.This process began and said theres 2 hours left to complete.
But this morning i can't login into the system,seems the SGEN not successful or sth else.....
disp+work is in yellow status with a message: Running but not connected to Message Server.J2EE status info unavailable.
here's the developer trace.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid ER1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 6112
Tue Jun 03 10:51:31 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6112) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Jun 03 10:51:36 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Tue Jun 03 10:51:41 2008
ERROR => OpenProcess PID 3180 failed for checking semaphore 4
ERROR_INVALID_PARAMETER: The parameter is incorrect. [semnt.c 1892]
DpIPCInit2: start server >EXXEPT01_ER1_01 <
DpShMCreate: sizeof(wp_adm) 26752 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 073F0040, size: 4661816)
DpShMCreate: allocated sys_adm at 073F0040
DpShMCreate: allocated wp_adm at 073F1E40
DpShMCreate: allocated tm_adm_list at 073F86C0
DpShMCreate: allocated tm_adm at 073F86F0
DpShMCreate: allocated wp_ca_adm at 077C7990
DpShMCreate: allocated appc_ca_adm at 077CD750
DpShMCreate: allocated comm_adm at 077CF690
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07850550
DpShMCreate: allocated gw_adm at 07850590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 078505C0
DpShMCreate: allocated wall_adm at 078505C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1632
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1351
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( EXXEPT01) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >EXXEPT01_ER1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Tue Jun 03 10:52:21 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jun 03 10:52:41 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2056
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1407
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTEDI found a suspicious log dev_jcontrol, maybe it will do some help.
There's some deadlock at end....
trc file: "D:\usr\sap\ER1\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 2612
system name : ER1
system nr. : 01
started at : Tue Jun 03 14:13:53 2008
arguments :
arg[00] : D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
arg[01] : pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=3675
arg[04] : -DSAPSYSTEM=01
arg[05] : -DSAPSYSTEMNAME=ER1
arg[06] : -DSAPMYNAME=EXXEPT01_ER1_01
arg[07] : -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4756] Tue Jun 03 14:13:53 2008
[Thr 4756] *** WARNING => INFO: Unknown property [instance.box.number=ER1DVEBMGS01exxept01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.host=EXXEPT01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.port=3202] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties;D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
-> ms host : EXXEPT01
-> ms port : 3902
-> OS libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> files [01] : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : EXXEPT01
-> ms port : 3902
-> os libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] sdm : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
[Thr 4756] *** WARNING => JsfOpenShm: ShmCreate (69, 295952, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c 715]
[Thr 4756] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c 761]
[Thr 4756] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c 1714]
[Thr 4756] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 271]
[Thr 4756] JControlCloseProgram: started (exitcode = -1)
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
[Thr 4756] JControlCloseProgram: good bye... (exitcode = -1)
[Thr 3152] Tue Jun 03 14:22:52 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:37:56 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:53:01 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:08:05 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:23:09 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ? -
I opened a new account on our computer for my husband so he can sync his iPhone separately from mine. I want to share some of the songs in my iTunes library with his new iTunes account. How do I go about doing this?
iTunes- How to share music between different accounts on a single computer
iTunes- How to share music and video
iTunes- Setting up Home Sharing on your computer -
New Patch Available for OATS 12.1
Hi All,
There is a new patch available on metalink for 12.1 which fixes a whole bunch of issues (especially with OTM). The filename is p14159195_12101_WINNT.
Regards
Wayne.Hi,
My apologies, the download page is currently down and I am working on getting it live again. In the meantime, you can download the patch directly using this link:
2012 SP1 f1 patch downloader
Please let me know if you have any issues accessing this link.
Al B.
Staff Software Engineer - TestStand
CTA/CLD -
How to use new patch updates in track
Hi All,
I am a developer working in NWDI. We have everything in place and working fine upto now.
SAP has release a patch for the software component i am using in a track. Basis guys have updated the track and they confirmed the patch is updated successfully.
Now when ever i rebuild my DC, the changes are not effected as per the new patch. Please let me how I will be able to use new patch updates in my DC(In NWDS I can see the old source code only, I did all SYNC's and refresh but didnt worked, even NWDI is restarted)
How I can confirm that the patch is updated to track successfully, from a developer point of view.
I have access to CMS and CBS.
Regards,
Sateesh ChandraDid you update your configuration in the studio?
--MLS -
Hello Tim,
In your announcement for the new patch, i think you haven't specified the new patch number. Below is your post.
Thank You.
This is a patch for Template Builder 10.1.3.4 and 10.1.3.4.1
The patch address the following issues:
+8463992 - INCORRECT IMPLEMENTATION OF XLIFF SPECIFICATION+
+8392756 - PROBLEM WITH CROSS-TAB(PIVOT TABLE) IN TEMPLATE BUILDER+
+9283891 - TB DIALOG DOES NOT DETECT MANUALLY UPDATED CODE+
+9310510 - TB CHART: THE AGGREGATION "COUNT" IS NOT PARSED+
+9157292 - PASSWORD FOR ANALYZER FOR EXCEL+
Because of bug 9283891 (found on this forum - thanks) I would recommend everyone
to download the patch
+Use Patch 9548722
-
New patches for SAP GUI 6.40 and the Screenreader Extension
Hi,
patch 10 for SAP GUI 6.40 and version 8 of the screenreader extension have been published on service.sap.com and ftp.sap.com.
Best regards,
ChristianHi John,
short update: I talked to the service market place team, and unfortunately the software corner is not a standard SMP site, so the nice features you know from other pages are not available, and won't be in the near future.
I will post news about new patches here, but as mentioned this is not part of the official workflow and may not always happen, for example when I'm on vacation
Best regards,
Christian -
New Patch (Web)Forms with Sun's Java Plugin 1.4 certified - when?
Hello,
We are waiting for the new patch version for Forms6i or Forms9i with
Sun's java Plugin on client platforms like Linux,... certified.
But when will it be available?
PeterPeter,
Sun's Plugin 1.4 was certified with Forms6i patch 12. The forms9i certification comes with teh first patch set.
Frank -
SOLVED(8i): missing symbol nnflboot (with new patch)
8i-EE with new patch (patch date 27 August) has a big problem:
the created libclntsh.so is useless: missing symbol nnflboot,
which doesn't exist anywhere.
(And to the guy who wrote something that sounded like this isn't
serious: not a single program that uses libclntsh, which is THE
library every dynamically linked Oracle-client program uses, will
run!)
Reason: script bin/gennfgt creates the C-sources for nnfgt.o,
which contains that undefined symbol (nnfgt.o is in libn8.a). The
script checks what libs are available and also checks for and
finds libldapclnt8.a. Now it adds a call to nnflboot to the
C-file, because it has found LDAP-support - but the libnldap8.a,
where this funtion is supposed to be defined, is size 0.
Good solution: hey, Oracle, give us a libnldap8.a!
Quick hack: remove the check for LDAP from gennfgt, and do
gennfgt >temp.c
gcc -c -o nnfgt.o temp.c
rm temp.c
ar r nnfgt.o libn8.a
genclntsh
relink all
That was easy, wasn't it ;-) ?
There are many more bugs left....
nullHello Michael,
thanks for the help, Oracle 8i on Suse 6.2 runs fine now. But I
didn3t test it very well, perhaps there still many bugs.
Just one quick hint:
it3s
ar r libn8.a nnfgt.o
not
ar r nnfgt.o libn8.a
I3m looking forward to your patch, so we don3t have to hack all
the 8i, to get it to work.
Keep up with the good work,
Ralph
null -
Installation new Language in our ERP system
Hi;
I need install a new language in our ERP system. I have our productive client. How I need install the new language?
- Client; 000 - execute the SMLT and install the new language
- Client 000, supplement with english
- Client 600 (productive client) supplement with English
- Import Support Packages
It´s correct?
One doubt, when supplement in client 600, What select in the screen?
- Supplement Cross-client tables
- Supplement Client-specific table
- System and control Tables
- Customizing table ????????
- Supplement Only
When implement the new languages, I need implement without users and process in the system or I don´t will have problems with users and process in the system?
Best reagrds.Hello Daniel,
Before installing the packages, please make sure to check if the system is ready to handle the additional languages.
Help link below mentions all the required notes to check the system, install language packs and post lang import activities.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/3e/9f9a7b95c811d384bb0060975b04f3/frameset.htm
Hope it helps.
Regards,
Srikishan -
List of features of new Patch level
Hello experts,
Can you advise how to find list of features of new patch level, would be great if someone shares the link.
Attached is one such sample. I am looking for features of PL 5 and 6 of 9.1
Thanks
DeepakHi both,
besides these info files or the corresponding overview notes which comes with every patch delivery, I just can recommend to check the Top Fixes document, highlighting the most important corrections which are being delivered in patches:
SAP Business One 9.1 Top Fixes on SAP PartnerEdge; SAP Business One 9.1 on Customer Portal
SAP Business One 9.0 Top Fixes on SAP PartnerEdge; SAP Business One 9.0 on Customer Portal
SAP Business One 8.82 Top Fixes on SAP PartnerEdge; SAP Business One 8.82 on Customer Portal
hope this helps,
Peter -
Applying a new patch on the ISE 1.4.1. reboot required?
when applying a new patch on the ISE 1.4.1, will the server be taken off line whilst the patch is applied. i.e.does the server require a reboot after the patch is applied?
This is what is presently installed:
Cisco Identity Services Engine
Version : 1.1.4.218
Cisco Identity Services Engine Patch
Version : 2
Cisco Identity Services Engine Patch
Version : 8
So is it correct to say that if I have installed patch 8 , then I do not need to install 3-7?
ise-patchbundle-1.1.4.218-3-80980.i386.tar.gz
ise-patchbundle-1.1.4.218-4-82816.i386.tar.gz
ise-patchbundle-1.1.4.218-5-83887.i386.tar.gz
ise-patchbundle-1.1.4.218-6-83972.i386.tar.gz
ise-patchbundle-1.1.4.218-7-87377.i386.tar.gz
Maybe you are looking for
-
Has anyone tried to install FCS on Mountain Lion?
-
How to aling the text in a JTable???
I use this code to make a vertical header like in excel. The thing is that i want to aling the text in that column but i couldn´t. I try to set the render, but i loose the header render in the column. Anyone know how to aling the text in that column
-
Output of RFC FM in background job
Hello, I have a report which call an RFC FM. The FM calls a class which write some output using write statement. How can this output be captured in the spool request of job for my report? Is it possible? Regards, Ahmed
-
Is it possible to insert data into two Excel worksheets using Report Generation Toolkit?
I'm using the toolkit to insert data into two separate worksheets in Excel using named cells. The problem is that it tends to favor one sheet or the other. In other words, one sheet will have data and the other no data and vice versa. (Sometimes I ge
-
Remove Search strategy in MBC2- Batch management
Dear All, I want to remove the search strategy assigned in the MBC2 for a particular movement type.Though i have deleted the sort sequence and removed the strategy in MBC2,when i am uploading the stock with 561 goods movement it takes me to the class