New PC! ! ! Not Starting! ! !

--------------------------------------------------------------------------------
Every time the power is turned on the fans start, there are four red LED's on the D-Bracket followed by one green and three red (Early chipset Initialization as said in manual). This is the part I am having problems with, after I see these LED's the lights just stay like that, with the fans spinning happly and no signal to the monitor at any time before or after.
I have re-seated the CPU several times, swapped the memory for 256MB of 333mHz and moved to other slots, checked both power cables to the mobo,swapped the hard drive, upgraded the PSU for 64bit compliant ( says on the box), removed the Mobo from the case, placed on a non conductive surfice and turned the power on only to get the same result ( to check if Mobo is earthing to the case), checked if risers are in correct possitions, checked the fan is plugged into FAN 1, swapped the GPU and felt like finding a very tall flat dropping it from the top while a friend videos this to send into PC Format.
The thing is I would just say the motherboard is dead, or the CPU is fryed but this is the second Mobo and CPU of this type I have had. The first I sent back as there was the same problem.
Am I loosing the plot? Have I missed somthing so obvious that even my half blind Gran could fix? Or am I just unlucky enough to now be the proud owner of my second fecked Mobo and CPU?
Maybe I should just take a picture and call it a nice paper weight!

First off how about some specs?
This may help you as well. D-Bracket LED explained
Let us know which combo of led's are lit.
Also post the specs on your PSU from the lable on it. Amps are what counts. Memory brand and model also helps.
Have you flashed your Bios? If so with which version?
Have you done a CMos reset with the jumper yet?
Is your Keyboard and Mouse USB or PS/2?

Similar Messages

More problems with new itunes not starting

Hi,
Have recently downloaded upgrade of iTunes and experienced the same problems as a few others - no response when trying to start it up. I was very happy indeed yesterday when the Quicktime standalone fix worked and my music reappeared. However, on restarting today, it's back to the square one - no response! Am I doing something wrong or is there anyone who can help?
HP Windows XP

I'm having the same problem on my desktop. I've done both a spyware search using ewido, and a virus check using symantec, neither of which helped. I tried uninstalling and re-installing and that also didn't help. Each time I try staring itunes I get the message:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
I'd be happy to send the error report that I get along with this message.
Oddly enough, this problem is only occuring on one computer. I have no problem with it on my laptop. I hadn't updated itunes for a while on my desktop.
Windows XP

New MBP Not Starting

My friend just purchased a new Mac Book Pro. We turned it on fine, I showed him everything and the upload was downloading at the same time. When the upload was complete, we restarted the computer... it stayed at the Apple loading screen and didn't move anywhere from that. The fans were off but then after a few minutes they turned on really high. We literally just opened it today.
What could be wrong? How often does a defected one come up? We restarted it a few times and the same happened over and over again. Unplugged all devices etc.
Cheers,
Bijan

Just phone the Apple support line.
They will get you to:
1. Reset the PRAM/NVRAM
http://docs.info.apple.com/article.html?artnum=2238
2. Then they will get you to reset the SMC.
http://docs.info.apple.com/article.html?artnum=303319
If its any consolation, I had to return my MacBookPro recently for a replacement. The new one is arriving tommorow/Monday.
Fingers crossed.
MacBook Pro 17" Mac OS X (10.4.9)

My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
This is reality. Best get used to it because it won't get any better.

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

Firefox will not start; new profile fixes it for 1 time, then 2nd time its back to broken

Windows 7 x64, ff3.6.8
ff3 will not run, clicking on .exe will not begin any app in taskmanager. the most i get is when clicking ff3 from the taskbar in win7 it will flash as if it is trying to do something, but nothing happens and the flashing stops.
uninstalled ff3.6.5; reinstalled 3.6.8, still same issue.
i created a new profile and started ff3, ff3 started & i got to a generic home page. i closed ff3, copied my bookmark file from the default profile to the new profile, restarted ff3, same problem as in the beginning.
i created a new profile & again it starts up, but when i close out, even without copying the bookmarks over (i was assuming that was the corrupted file), it will not run the 2nd time.
i have done this for 7 profiles and all of them work the first time, but none will work after that even without copying any profile information from the original default profile.
in addition i cut all the profiles out of the profile folder and cc'd to another location on another drive thinking that'd prevent the default from corrupting the other files, nothing.
brief history(sorry for the long post)
I ran a windows update prior to leaving on vacation, shut the PC down & when I came back the pc wouldnt boot. reset my bios to default and finally got back into windows & it finished the update.
when i got back in, ff3 was giving me problems and kept hanging up for some reason. so i hard reset & tried to implement my OC profile in bios. i was not able to get back into windows w/ my OC profile again, so i again went back to default bios.
ever since then ff3 will not work. ie8 works fine, no viruses reported thru mse, i cant figure it out!
any help would be greatly appreciated, thanks.

well i kinda fixed it i spose...
i deleted everything in appdata under mozilla & macromedia and deleted the plugins folder from my installation folder for ff3. uninstalled ff3, reinstalled ff3. now everything works fine. just have to redo my bookmarks & settings.
sorry to waste anyone's time...but hopefully if someone else has the problem, now they can fix it. peace.

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

This might help restart it http://support.apple.com/kb/TS1567

S my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!

my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!

Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Premiere Elements 12 will not start a new project

I loaded Premiere Elements 12 on my...
64bit HP Laptop Dv7
Intel core i7
Windows 7
Radeon Graphics (HD 6770m)
updated Quicktime
updated display drivers as requested when first installed.
reloaded PE 12
Started PE12 but when i click Video Editor and then select New Project the button shows the purple and black lines for about a minute and then stops and nothing happens
I have almost given up. I have been trying to load this program on my pc for 5 days. Nothing but problems. I have asked pc gurus at work and no one has a clue what could be wrong.
Why will Adobe Premiere Elements 12 not start on my laptop?
by the way there is no BadDrivers.txt file to delete that i can find...
Does anyone have a clue as to why the application would not start?

Rotary
It is late where I am so I will give you some things to work on.
Premiere Elements does not fare well with 2 video cards/graphics cards. Have you disabled the Intel and observed the consequences?
Determine if the problem is there with and without the antivirus disabled.
BadDrivers.txt file
Local Disk C
Program Data
Adobe
Premiere Elements
in the Premiere Elements Folder will be one file and some folders. You do not want the folders or what is in them. You want that file which is the BadDrivers.txt file. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path shown. Be aware that after you open the program again after the file deletion, the program will generate a new BadDrivers.txt file but by that time the problem should be gone (hopefully).
I would probably be going after the Adobe Premiere Elements Prefs file -
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Better yet....check out the information in the following blog posts
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
We will be watching for your progress in the light of day.
Thank you.
ATR

Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What does this mean? I have had this phone for over a year..

Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??

I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck!

HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

Hello, BAHannebaum.
The article below should resolve any device not being recognized in iTunes issue that you are experiencing. The most common issues are the Apple Mobile Device Support driver or iTunes is outdated. Start with the first step and test the results after each step processed.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Sync session failed to start on my ipod touch. tried to delete back up history but it only shows my daughters ipod touch and not mine! Im unable to update or purchase new aps, not sure how to fix this problem?

sync session has failed to start on my ipod touch. Tried to delete the back up but it only shows my daughters ipod touch. Iam unable to update or purchase new aps, not sure how to fix this problem?

Try:
https://discussions.apple.com/thread/3415227?start=0&tstart=0
https://discussions.apple.com/message/16400530#16400530

I'm trying to sync a new i phone to i tunes. I get message that says cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747

New PC! ! ! Not Starting! ! !

Similar Messages

Maybe you are looking for