New PC, Will This Stuff Work Together?

Hey,
I'm trying to build my own computer ive been searching the net for ages trying to find some good products, i have come up with this:
Intel Pentium 4 630 64bit 3.0Ghz
MSI 925XE Neo Platinum
MSI NX6600GT-TD128E
Corsair TWIN2X512-4200 533Mhz
I need to know will the CPU and RAM work with this motherboard.
Thanks.
p.s  is it a good choice?

OK, just some quick comments before your Internet-time runs out.
If you´re going to buy a system today, it looks good.
Corsair is a wellknow RAM maker, so it should be compatible - if you still want to check :
http://compatible.corsairmemory.com/default.aspx
I would have considered the MSI 955X Platinum MoBo ( to be able to upgrade to new Intel dual core cpu in the future )
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=664
Not sure if the 955X MoBo is avaible in the shops yet.
Good Luck.

Similar Messages

  • I got factory unlocked iphone5s A1530 model from india with warranty... Now i shifting to rgina canada so will this phone work in canada with canadian sim card...with canadian operators

    I got factory unlocked iphone5s A1530 model from india with warranty... Now i shifting to regina canada so will this phone work in canada with canadian sim card...with Canadian operators permanently...

    Remember though, that although you have warranty on this phone, it is only valid in India and NOT Canada, because you purchased the phone in India and iPhone warranty is country specific, so if you have problems with the phone, then you'll need to take it back to India to get it fixed.
    If you will be in Canada for any length of time, then buy a new phone in Canada.  It will be guaranteed to work then and you will also have warranty cover.

  • Will this drive work in firewire?

    I have a 80GB Western WD00BB-OOJKCO drive as my backup. If I upgrade to the new iMac will I be able to use this drive as a firewire and upload all my applications back onto my new iMac? I presently do my backup with Carbon Copy Cloner as a bootable backup.
    I know I would have to purchase a firewire case for the drive, but will this drive work in a firewire case?
    Thanks

    Don't see why not assuming you have all the files required by your applications fully backed up. Some applications install data outside of the Applications folder. Some record serial numbers into invisible files. If all the data are not properly transferred then you may need to reinstall some applications.
    If you are moving from a PPC to an Intel Mac, then I suggest reading the following;
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
    Basically the instructions you should follow are:
    1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
    2. Connect a Firewire cable between your old Mac and your new Intel Mac.
    3. Startup your old Mac in Target Disk Mode.
    4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    4. Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
    /Home/Library/Preferences/ copy any preferences needed for third-party applications
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to another forum user for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.

  • Will this configuration work for CS5.5?

    Will this Dell work? Intel i7-2600? 16 GB dual channel DDRS SDRAM at 1333Mhz, nvidea geforce gt530? Want to buy Production Premium but have limited budget, don't need top of line computer performance, just workable ... All advice greatly appreciated. (I couldn't find in tech specs which video cards are supported.) Am also looking at Canon XF 100, which i think is supported by CS5.5, right?

    John,
    The GT 530 is very slow. It has only 96 cores, crummy DDR3 video RAM, only 128-bit memory bus. Basically a GT 430 with a new OEM-only name on it.
    The Quadro 4000 is a ripoff as far as Premiere Pro CS5.5 performance is concerned: It is basically similar in performance to the GTX 460 SE (not the regular GTX 460): Only 256 cores on the Quadro 4000 versus 288 cores on the GTX 460 SE. Worse, the Quadro 4000 costs five times more money than the GTX 460 SE.

  • Will this battery work for my laptop?

    I have a laptop from like 2009. It's going to crap and I recently got a new one, but it still runs, albeit slowly on startup and everything, and I think it's because of the battery, as it says "Consider Replacing Battery" and when I unplug the charger it just shuts off, and it only charges to 51%. So what I want to know is will this battery work for my laptop? http://www.amazon.com/gp/product/B007W1QBO4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=AF7ENLFPN87DK
    The battery right now says "Replace with HP Spare 593550-001 and says 2010/10. This battery says 593553-01, but it looks almost identical to my current battery. So will this get the job done?

    Hi,
    What is the model of your computer ? (HP 2000 is a series, not a model). Please check the compatible list:
       http://partsurfer.hp.com/Search.aspx?SearchText=593553-001
    By the way, slow booting up may not due to weak/faulty battery. Can it boot faster using AC ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    No. Only those Apps that are not installed on the new will migrate over.

  • I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone?

    I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.

    You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
    Hope that helps

  • Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

    Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

    The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
    You will need to the Lightning to VGA adapter directly
    http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
    Or the Lightning Digital AV Adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    If the projector supports HDMI input.

  • Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
    You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

  • To The Above Post: Will this CPU work with this MOBO.....

     Just a FYI the Link for the CPU compatibility checker 404s when I click on it.

    he means that sticky topic "Will this CPU work on my board?" ==>  "https://forum-en.msi.com/index.php?topic=129204.0"
    some of the links there are invalid
    EDIT: I've corrected them

  • After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again

    After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again?

    no.
    you need the update for a mac, not windows.
    Product updates

  • I would like to buy iphone4$ in Canada for my brother who lives in Russia. is it possible to change language on iphone from English to Russian, and will this phone work in Russia?

    i would like to buy iphone4$ in Canada for my brother who lives in Russia. is it possible to change language on iphone from English to Russian, and will this phone work in Russia?

    Language change is no problem, you can switch to anything in the tech specs.
    http://www.apple.com/iphone/specs.html

  • I want to download pictures from my iphone to my new computer.  I already have itunes on my pc. I need to download itunes on my new laptop, will this create issues with my other itunes?

    I want to download pictures from my iphone to my new laptop.  I already have itunes on my pc. I need to download itunes on my new laptop, will this create issues with my other itunes?

    m-cp wrote:
    I want to download pictures from my iphone to my new laptop.
    -> iOS: Importing personal photos and videos from iOS devices to your computer
    I need to download itunes on my new laptop, will this create issues with my other itunes?
    No.

  • Will this chip work in a powerbook?

    my family is all getting me compusa gift cards this year for christmas and I plan to get a 1GB memory chip with them...will this chip work in my 1.5 GHz PB...?
    http://www.compusa.com/products/productinfo.asp?productcode=318419&pfp=SEARCH

    Hello,
    Yes it will work with your powebook it will just show up in the system profiler as pc 2700 but no harm will be one to your computer.
    Kenny

Maybe you are looking for

  • Error in Using JDAPI (Java Development API)

    I have some forms developed in Version 6.0.8.8.0 I am using Oracle JDeveloper 9.0.4 But when I try to test these code for upgrading from version 6 to 10g I am getting following Error My Program Codes import java.io.*; import oracle.forms.jdapi.*; pub

  • Autocomplete is not working for Sharepoint 2013 search box.

    I added the below code in cewp in sharepoint 2010 and autocomplete worked fine. http://sharesilver.wordpress.com/2011/11/26/auto-suggestioncomplete-in-sharepoint-search-text-box-with-jquery-like-in-google-part-1/#comment-605 when i added this code in

  • Error with Download JDBC Drivers page

    There appears to be an error with the JDBC Drivers download page. When navigating from the top-level download page, all I'm seeing is '<SCRIPT LANGUAGE="javascri'. Is there another page from which I can download the driver? Guy Heathcote Ordnance Sur

  • Macbook 2008 sound to Home Theatre System which only has optical audio.

    Trying to connect my macbook (2008) to panasonic home theatre system which only has optical audio. Tried using toslink optical audio cable with 3.5mm jack converter but still no sound, any ideas please? Thanks

  • I can't rename  my jpeg's

    I don't have iphoto installed and I imported a bunch of jpeg's from a DVD someone gave me. I moved them to my HD and when I try to change the names of the pics, I can't even change the text without opening the pic in preview. I have tried clicking al