New phone, wants voicemail password

New iphone 5s, keeps asking for voicemail password, have tried all passwords it doesnt seem to work,

Call your carrier & have them reset your Voicemail.

Similar Messages

  • TS2755 my new iphone says voicemail password is incorrect when i didnt enter a password nor do I have a password.

    my new iphone constantly shows an alert saying my voicemail password is incorrect when i didn't enter a password nor do i have a voicemail password. how can i eliminate alert from appearingF?

    Try your phone number as the password.  Or you can contact your cellular carrier for assistance.

  • HT6154 My new phone says my password has been disabled

    How do I get my password to work on my phone?

    You need to place the iPod in recovery mode and then restore it via iTunes on yur computer.  Restore from backup if you have a backup.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    For more information see:
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • HT1687 If I go to my phone settings i don't have the opinion to "change voicemail password" please help :(

    I cant find a way to change my voicemail password! Please help :(

    On your iPhone, go to Settings --> Phone --> Change Voicemail Password (near the bottom).

  • I bought a new iphone 5s and restored all files from my wifes old iphone4. at the old phone, there was an icloud account which was remained from previous owner(it was second hand). After restore, it came to my new phone and I can not remove it.

    This operation has inherited where is my iphone option too. It should be selectable option but it came with restore.
    I got crazy of this. I bought a new phone, wanted to bring data from other phone, but it brough icloud settings and even where is my iphone option as selected. What should I do?
    I can go to the shop which I bought but I am not sure what they can do. Please guide me what to do. I have original invoice written for my name.

    when I check guarantee info from apple website, the following information is listed.
    i think, it is authorized and under guarantee.
    Valid Purchase Date
    A validated purchase date lets Apple quickly find your product and provide the help you need.
    Telephone Technical Support: Active
    Your product is eligible for complimentary telephone technical support during the first 90 days.
    Estimated Expiration Date: 04 July 2014
    More about complimentary support
    Contact Apple Support
    Repairs and Service Coverage: Active
    Your product is covered for eligible hardware repairs and service under Apple's Limited Warranty.
    Estimated Expiration Date: 04 April 2016
    Learn about Apple's coverage information for your product.

  • I have a white screen on my iPhone.  I've reset it and have also done restore through iTunes.  Didn't work.  Was wondering if i restored as a new phone will i loose my contacts

    i have a white screen on my computers.  I tried resetting it and it worked for a few minutes until it was put to sleep and then went back to white screen when i turned it back on. I tried resetting again and it did not work.  I then did restore for itunes.  it didn't work.  was wondering if i did restore, as a new phone set up in itunes will i loose my contacts.  just want to make sure before i try in the event i have to buy a new phone want to be able to have the information to transfer.

    restoring as new does just that.  It will wipe your phone clean just as if you just bought it.
    If you've been using your iPhone as recommended, you've been synching your contacts to your computer to a contact manager such as Outlook or Address Book, or you've been synching your contacts with a cloud service like MobileMe or Google.  Your contacts should be safe in one of those locations.

  • Voicemail password incorrect message on my new phone

    why do i keep getting a incorrect voicemail message on my new phone when i havent set one yet?

    iPhone: How to reset or change voicemail password

  • Going from iphone 4s to 6 want to know if i can save and or tran my voicemails and voice memos to put on my new phone

    going from 4s to 6 can I save my favorite voice mails and voice memos to put on my new phone via pc or cloud

    If you are planning to set up your iPhone 6 by restoring the iCloud backup from the iPhone 4s, your Visual Voice Mails and Voice Memos will be restored.

  • I changed my email address for iTunes & iCloud, but my new phone keeps asking for me to enter the apple id password for an old email to use for store purchases. What do I do to restore my backup to my new phone?

    Im trying to load a icloud backup and I deleted everything from my new phone but now it wants an apple id password from an old email address.  What do I do?

    https://iforgot.apple.com/appleid
    If you forgot your Apple ID password - Apple Support
    Contact Apple for help with Apple ID account security

  • Backed up my old phone to my computer.  trying to sync new phone and retrieve old info.  It is asking for a password.  I never gave it one.  How do I get to my stuff????

    backed up my old i-phone 3 to my computer.  tried to sync new i-phone 4S to computer to restore info.  It is asking for a password.  I never assigned one.  How do I get to my info????

    iTunes will recognize your new phone as a different device from your old phone.  Do you have any information on your new phone that you want to save?  Restoring to the backup of your old phone will overwrite your data and settings with those of your old phone.  If you want to save any data on your new phone, you'll need to do this first.  After doing so, connect it to iTunes, right-click on the name of your phone on the left side and select Restore from Backup, when prompted, selecte the backup of your old phone to restore from.

  • IPhone 5 keeps asking for voicemail password, I do not want to give it

    5-10 times per day, and usually while I'm driving and have GPS up on the screen, my iPhone 5 / iOS 7 will pop up and ask for a voicemail password.
    I do not use voicemail. I do not want to set up voicemail. I do not want to have voicemail. I do not want to have a voicemail password. And even if I had a voicemail password I do not want my phone to have this password.
    How can I stop iPhone from continually asking for this piece of information which is obvious that I will not give?

    Voicemail is a function of the cellular account that you have with your cellular provider. Contact your cellular provider to have voicemail turned off.

  • SPA 500 Phones - Automatically dial voicemail password after voicemail number?

    I  am provisioning a set of SPA 500 series phones (a mix of SPA 504g &  SPA 525g) for users in my office and would like to configure the  voicemail button to automatically send the voicemail box number and/or  voicemail password after dialing the voicemail number.
    There  are two ways of dialing the voicemail system, either with *98 or with  the user's voicemail box SIP URL.  When using *98 for the voicemail  number, the user is required to enter their box number (i.e. 7890), then  their VM PIN (i.e. 1234).  However, when using the mailbox's SIP URL  for the voicemail number, the outgoing message is played as if a call  had gone unanswered, which requires the user to enter STAR+PIN (i.e.  *1234) to access their voicemail.
    Can the phone be configured to dial sequences  like either *98[pause]7890[pause]1234 or [email protected][pause]*1234 ? 
    Ideally  the voicemail button would do all this, however if it's not possible  there, perhaps it could be done with a Speed DIal or an Unused Line  Key.  Any help in this direction would be great.
    Thanks!

    Even though I am late to the party on this, I appreciate you posting  those Release Notes.  I have upgraded my firmware to take advantage of  the new dialing features.   However, I cannot for the life of me figure  out how to insert a space into the dialing string.  I am able to insert  the other characters discussed in those Notes, but not a space.  Can  anybody enlighten me?  I am using a SPA 504G.
    Many thanks.
    SOLUTION (EDIT):  I found the answer.  When in the dialing field, scroll far right in the soft keys an select IP, which gives you more choices for characters in your string.  To insert a space, tap on the zero key.  The first entry is a space.  It is hard to see, even when inserted into your string, but it is there.  To insert a comma to create a 2-second pause, tap the 1 key.  And, so as to unify the solution here, I am pasting below the instructions from the release notes referenced above.
    Release Notes for Cisco Small Business SPA5XX and SPA30X IP Phones Firmware Version 7.5.1a
    Speed Dial Wait, Pause, and DTMF
    Speed dial entries can include wait (X) and pause (,) parameters that allow manual and automatic DTMF (Dual-tone multi-frequency) signal transmission.
    Syntax:
            {Dial_String}[ ][,|X][DTMF_string][,|X][DTMF_string]
    Where:
    Dial_String—The number that the user is trying to reach. For example, 8537777 or
    14088537777.
    (space)—A dial termination that defines or delimits the end of the dial string. The
    space is mandatory. If the phone encounters an X or a comma (,) before the space,
    the characters are treated as part of dial string.
    , (comma)—A 2-second pause that is inserted for each comma in the string.
    X (wait)—Awaits user input and acknowledgement
    • The “Waiting for more digits input. When done, press OK to continue” message displays.
    • The user manually enters DTMF signals by using the dial pad.
    • The user selects OK, acknowledging the transmission of the manual entry is complete.
    • The phone sends any DTMF signals defined by DTMF_string.
    • The phone executes the next parameter. If there are no more parameters in the dial string to execute, the phone exits to the main screen. The wait does not timeout; the wait prompt window is not dismissed until user confirms the wait prompt or the call is ended either by the user or ended by the
    remote device.
    DTMF_string—The DTMF signals that a user is sends to a remote device after the call is connected. The phone cannot send signals other than valid DTMF signals.
    Example
    18887225555 ,,5552X2222
    A speed dial entry triggers the phone to dial 18887225555. The space indicates the end of the dial string. The phone waits 4 seconds (2 commas), and then sends the DTMF signals 5552. A message is displayed, prompting the user to manually dial DTMF signals. When the user has finished dialing the DTMF signals, the user selects OK to confirm the manual DTMF signal transmission is complete. The phone sends the DTMF signals 2222.

  • New iPhone 4 keeps asking for voicemail password?

    Hubs new iPhone 4 that he upgraded from 3G keeps asking for his voicemail password everytime he wakes it from sleep. He just hits cancel and moves on but it happens all the time. We don't even know what his voicemail password is and he never had to do that before on the 3G so what is up with that!
    How can he get rid of this prompt?
    Thanks!

    Press and hold the "1" key or your phone's keypad & follow the prompts to reset your voicemail password, or dial 611 from your phone & have an AT&T CSR reset it for you. Once done, the prompts will go away.

  • On my phone the iCloud box opens and has an old email ID and wants the password....I have reset the ID and password several times, what am I missing??

    iCloud on my phone still shows 'old email ID' and wants the password.  I have reset the ID(new email address) several times, and my phone does not update. Help!  What am I missing?

    Did you go through the steps in my earlier post?
    If the password for your old ID is not accepted when you try to sign out, and the old ID is an earlier version of your current ID, you'll have to temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password.

  • HT4623 I know my apple id and password but my new iphone 5 is asking me for my "voicemail password" and I dont know what that is and how can I disable this request?

    I know my apple id and password but my new iphone 5 is asking for a voicemail password and I dont know what that is.  Can I disable this?

    The voicemail password is independent from Apple/your iPhone and is related to your service provider. If you already set a password for your voice mailbox, you would need to input it in order to access your voice messages associated with your cell-phone plan. If you forgot your voice-mail password or did not set one, I'd advise you to simply call your cell-service provider support which should quickly resolve the issue.

Maybe you are looking for

  • Passing a float from one class to another?

    ok i have an app that i have started from scratch several times on. I have a xib file containing anywhere from 3 - 10 textfields. i want to be able to pass data input in those textFeilds to another xib to display in a label, but also i want to be abl

  • Data services connectivity with Oracle 8i database

    Query 1: We are using Data services XI R3 for pulling data from Oracle 8i data soure to Oracle 10g target. Our repository is also a 10g database. We created a datastore for 8i source and tried to import the table. Below is the error that we get when

  • How to Pay the difference amount after Change in Grade

    Hi, I have pay element which has global values for different grades. GRADE E = 10000 GRADE F= 15000 Payment for allowance is happening once in a year, but we need to pay the additional amount if employee is moved from grade E to F. But the change can

  • Downloading Smartforms Output into MS Word format

    Hi, Is there any way to download Smartform Output data in to MS Word.?...like the way we download Smartform data into PDF format. is there any FM available to handle this like CONVERT_OTF, CONVERT_OTF_2_PDF in case of PDF. Full points for useful answ

  • Double-click to Install

    Has anyone heard of an application called Double-click to Install? It is installed on the main level of the hard drive of an iBook 466. When I launch it, Classic launches. That is very interesting because I do not have OS 9 installed on this computer