New phone wifi issues, 500 internal server error

hello, hoping some one could help as im stuck! quick run down of my setup, i beleive i have a home hub 4, i run a tablet, a laptop and a desktop pc on my wifi, i run my sky box of an ethernet cable, all these devices work fine.
i got a new phone sunday, it was a sony experia m2. got it home and set it all up, found out it would not work connected to my wifi, it connects to it fine, i can use all my apps fine, when i go on browser i can get onto google, facebook, twiter and hotmail, may be more but these are all i have tried and got to work, if i try other sites i get a white screen that says 500 internal server error, internal error. i took it back to three and it connects fine to their wifi, i then took it round my mums and my wifes mums house and it also connects fine with there wifi. i spoke to three technical support and after 45 mins i was told to take it back to store and replace it, which i did and same fault. took it back again and was givern and differant phone, now a htc 610, guess what, same fault.
i have called bt 3 times, first time the line was check, second time i was directed into a bt setup page after entering a load of numbers in the browser bar and i changed an interface number? the third time i was told the phone is fine and the broadband is fine, clearly there is a fault or setup error some were, i have had 3 brand new phones which neiher work
can anyone shed any light on this? phone shop cant do anything else as its not a problem with the phone and im not getting anywere with bt
thanks
sam

i have managed to fix this myself, now very happy. i have googled so much on this issue but could not find anything, found this site and posted before i looked around. i found a post about somone with the same issue with an i phone. some one posted this link
http://bt.custhelp.com/app/answers/detail/a_id/44328/c/
carried this out and it now works fine.

Similar Messages

New Apache sites return 500 Internal Server Error for all CFML requests

This is an ugly one. I think it is an Apache2 - ColdFusion 9 web server connector problem.
I have two Solaris Unix web servers. Each of these servers have a dozen and a half Apache web sites each one connected to one of five ColdFusion instances.
All, but TWO of them are working properly. We created two new Apache web sites and connected them to a new ColdFusion instance. This worked fine on one of our boxes, the development one, but not on the other, production of course.
Whenever we try to request a cfm url from one of these sites on the production server we get a 500 Internal Server Error. HTML pages serve up just fine, and the new instance's Administrator runs fine on its 8305 port. So both Apache and ColdFusion seem to be working independently, but they are not talking to each other. All the other Apache sites connected to the other four ColdFusion instances also work properly.
This has led me to investigate the web server connectors. They have always been tricky and problematic to set up on these boxes. The built in tools have never worked for us on these boxes and we have always had to manually compile the connectors and configure the connections in the web sites..
But, as far as I can tell, all the connection setups are the same between working examples and these non-working sites.
Any insights into what else I should be checking and|or how web server connectors actually work (they have alwasy been mysterious black boxes to me) would be greatly appreciated.
TIA
Ian

Some more information.
I took a closer look at the logs (I wasn't looking
in the Apache logs before). I found this block for the last attempt to
request a cfm page.
[Tue Nov 23 15:17:17 2010] [notice] jrApache[18177: 60758] could not
open serverstore "/opt/jrun4/lib/wsconfig/www/jrunserver.store": No such
file or directory[Tue Nov 23 15:17:17 2010] [notice] jrApache[18177:
60758] Couldn't initialize from remote server, JRun server(s) probably
down.
What I don't understand is why could it not open that file, it is there
and it has the same permissions as all the other web server connectors.
/opt/jrun4/lib/wsconfig/www
$ ls -al
total 166
drwxr-xr-x   2 root     root         512 May 29 13:51 .
drwxr-xr-x   8 root     root         512 May 29 13:51 ..
-rw-r--r--   1 root     root          14 May 29 13:51 jrunservers.store
-rwxr-xr-x   1 root     root       81528 May 29 13:51 mod_jrun20.so
The following is the 'calpip' connector folder that is working just fine.
/opt/jrun4/lib/wsconfig/calpip
$ ls -al
total 166
drwxr-xr-x   2 root     root         512 May 29 13:51 .
drwxr-xr-x   8 root     root         512 May 29 13:51 ..
-rw-r--r--   1 root     root          14 May 29 13:51 jrunservers.store
-rwxr-xr-x   1 root     root       81528 May 29 13:51 mod_jrun20.so

Critical Issue - 500- Internal Server Error for request in User's Inbox

Hi,
We have developed and deployed SOA composite and custom task flow (For Customized Email notifications).[30.7.1.1 Creating a Task Flow with a Router - http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_designtf.htm#SOASE744]
When a request is generated it goes for an approval. In Approver's inbox in identity console you can see request is pending. When Approver clicks on that link to see request details error is displayed - "500- Internal Server Error "
In OIM logs I can see this:
oracle.adf.controller.ControllerException: ADFC-02001: The ADF Controller cannot find '/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml'.
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:466)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:367)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:179)
        at oracle.adfinternal.controller.metadata.MetadataServiceImpl.getTaskFlowDefinition(MetadataServiceImpl.java:209)
        at oracle.adfinternal.controller.util.SecurityUtils.invokeURLAllowed(SecurityUtils.java:33)
        at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:210)
        at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.invokeTaskFlowByUrl(RemoteTaskFlowCallRequestHandler.java:99)
        at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.doCreateView(RemoteTaskFlowCallRequestHandler.java:64)
        at oracle.adfinternal.controller.application.BaseRequestHandlerImpl.createView(BaseRequestHandlerImpl.java:57)
        at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.createView(ViewHandlerImpl.java:95)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:831)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
        at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml"
        at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1408)
Screenshot of Error in Inbox:
This is critical issue for us and is showstopper for Go-Live. So any kind of help is highly appreciated.
Thank you,
Tanmay

If its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy

Error 500--Internal Server Error while trying to create a new DataModel

Infrastructure_: OBIEE 11.1.1.5 on 64 bit Linux (RHEL)
Issue:* We get Error 500--Internal Server Error whenever we try to create a new data model in BI Publisher.
Details:* We installed OBIEE 11.1.1.5 on 64 bit Linux machine. Whenever we try to create a new data model in BI Publisher, the page errors out with the message
"Error 500--Internal Server Error, From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request"
Edited by: user9544005 on Dec 29, 2011 7:02 AM

Hello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J.

HTTP 500 (Internal Server Error) on 7921 IP Phone

Hello all, I'm attempting to run the sample push2phone application (ASP) to deliver text messages to a model 7921 ip phone. I have edited the sample source as needed, installed the required COM server & associated the phone with the "sdkapps" user in CallManager.
After executing the push, the web page informs me that it has sent the message to the phone. However, the phone never shows the pushed message on its display. The only thing I see change on the phone is that the phrase "Host Not Found" appears in the lower text bar.
I also used a packet sniffer to get a better look at what's going on. After the web server delivers the CiscoIPPhoneExecute object via POST, the HTTP response code from the ip phone is 500 "Internal Server Error".
Any ideas about what I could be missing? My CallManager version is 4.1.(3). I recently deployed the 4-1-devpack-65 to install the necessary firmware for the 7921 phone.
Thanks for any assistance,
-Mike

Mike, thank you for your reply.
The XML is simply the push2phone ASP sample included in the SDK. It's just a CiscoIPPhoneExecute object which pushes an alert message to the phone. We actually debugged the sample code, extracted the URLs from the debugger and then pasted them into a browser on our machines; we were able to view the URL. The URLs aren't the problem.
We have discovered the actual problem to be an issue with the phone's usage of DNS. We noticed that in the CallManager Enterprise Parameter area, there were many URLs that referenced DSNs (e.g. "cisco1" for CCM server). We then replaced the DSN strings with IP addresses, *especially for the parameter URL Authenticate*, and the phone was then able to receive the alert messages. As far as we can tell, the phone does recognize our DNS server (it shows up under the Network Settings summary). We can't explain why the phone doesn't properly use DNS, and we'd rather not use fixed IP addresses in CCM, but that is the workaround.
Also, I have to say that from a troubleshooting perspective, the phone is practically useless. We saw that it issued a "Host Not Found" message when we attempted to push XML to it. But how were we supposed to know which host it couldn't find, and which operation (i.e. HTTP GET or POST) triggered the error? The phone trace logs have lots of information in them, but nothing related to IP services. It sure would be nice to have access to a shell on the phone in order to assist in diagnosing just these kind of connectivity errors. Also, some improved IP service logging would be useful.
Hope this helps someone else.
-Mike

New to OA Framework, getting 500 Internal Server Error

Dear OAF Gurus,
I am new in OA Framework development, I have developed first page following https://blogs.oracle.com/prajkumar/entry/oaf_hello_world_tutorial.
But when i run the page got the error
500 Internal Server Error
oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating new Poolable object.
     at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1509)
Please help me in this regard.
QZ

Dear Zahid,
Thanks for your reply,
I have performed:
Please perform the following steps:
1. Go to Internet Explorer --> Tools --> Internet Options --> Connections tab --> LAN settings --> Advanced button
2. In Exceptions, please include "192.168.*" <without quotes>
3. Click Ok and Run your page again from Jdeveloper.
Im using firefox and and in No Proxy Field i put 192.168.*.
In addtition to above, also verify the following property in your Jdeveloper:
Tools --> Embedded OC4J Server Properties --> Startup --> Host Name or IP Address used to refer to Embeded OC4J should be 'Default Local IP Address'.
I also click on Default Local IP Address
Now page url changed "http://192.168.92.1:8988/OA_HTML/runregion.jsp"
but same error.
I have searched
Tip: A little Search would have helped you in not creating a duplicate thread.
500 internal server error
But you know 500 Internet server error is very common and generic error so lot of information there but my issue may be due to some problem in dbc file or db connection???
i also change the dbc file name from template.dbc to domain_name.dbc copy from server and paste in
C:\p9879989_R12_GENERIC\jdevhome\jdev\dbc_files\secure
For Reference dbc file:
# $Header: template.dbc 120.0 2005/05/07 16:45:30 appldev ship $
# TEMPLATE.dbc
#   Template database configuration file.
#   Create one copy of this file for each database instance this
#   Applications Server will connect to. Each file should have the name
#       <database_instance_name>.dbc
#   and be located in this directory ($FND_TOP/secure).
#   Change each of the parameters below to values appropriate for
#   the database instance. Do not change the syntax.
#   This file can be gererated using the AdminAppServer tool.
#   This is a java utility that can be run from the command line.
#   Instructions to use this tool are documented in the Applications
#   Sysadmin Manual.
# TWO_TASK
#   SQL*Net name of database.
TWO_TASK=database
# FNDNAM
#   Oracle User to be used for Oracle Applications connection.
#   The FNDNAM Oracle User must have Oracle Applications privilege level
#   'Universal'.
FNDNAM=APPS
# GWYUID
#   Oracle User/Password of the public account to be used for initial
#   Oracle Applications connection.
#   The GWYUID Oracle User must have Oracle Applications privilege level
#   'Public'.
GWYUID=APPLSYSPUB/PUB
# GUEST_USER_PWD
#   Applications User/Password of the Guest user.
#   The Guest Applications User is a public Applications user
#   with no responsibilities assigned. If no such user exists,
#   create one in the 'Define User' form. Do not use a user with
#   any active responsibilities. Note: This parameter is for
#   an applications user NOT an Oracle user. The Guest user
#   is seeded with 11i.
GUEST_USER_PWD=GUEST/GUEST
# THE FOLLOWING PARAMETERS ARE RELEVANT ONLY
# IF JDBC IS BEING USED. IF THEY ARE NOT SUPPLIED, DEFAULTS
# WILL BE USED.
# APPS_JDBC_DRIVER_TYPE
#   The type of JDBC driver being used. If no value is supplied,
#   the thick (OCI) driver will be used. Give a value of THIN
#   or THICK depending on the type of JDBC driver to be used.
#   For a detailed discussion on the THIN vs the THICK driver,
#   refer to the JDBC documentation. For Release 11i , this
#   should be set to a value of THIN.
APPS_JDBC_DRIVER_TYPE=THIN
# DB_HOST
#   The host machine on which the database resides. This parameter
#   is required only if the THIN DRIVER is being used.
DB_HOST=host_name
# DB_PORT
#   The port of the host machine on which the database resides.
#   This is required only if the THIN driver is being used.
DB_PORT=port_number
# DB_NAME
# Database instance name.
# This is required only if the THIN driver is being used.
# If no value is provided, the TWO_TASK is used.
# DB_NAME=db_name
Best Regards,
Qamar

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

500 Internal Server Error when trying to add new members

My Workspace is working correctly but when I try to add new users, I get the following error:
500 Internal Server Error
Thanks
Michel C.

Hello Michel,
How are you processing to add new members?
You should be manager of your workspace and
- go to http://beehiveonline.oracle.com
- click on buttom "Create Group or Add New Members"
- Choose your group
- CLick on the link "Add new member"
regards
Fred

CF10 500 internal server errors

I have recently installed CF10 on a Win 2008 R2 server it will open the main pages (index.cfm) but if I try to browse to the links within the site I get a 500 internal server error or 404 file not found. I have looked at a few articles in regards to creating a virtual directory named jakarta this works for only one site and seems to only work if I set that virtual directoyr to the wsconfig\1 folder. I am not familiar with CF by anymeans so if answers could be as rookie as possible.
Thanks,

Thank you for your kind words A little bit which I've learned in CF in only because of all our CF users who post their queries/answers and indeed you are one of them
Usually when you set Enable 32-bit Application pool to false, you need not to restart IIS however during maintenance window you can restart IIS
Another thing which I want to confirm, have you added an application/applications under a website and assigned those to separate application pools?
If yes, then please change the application's pool to the website's pool. So if, default website has 4 applications under it, then all four applications must be assigned with Default App pool (The app pool for default website).
For testing purpose, Add a new webiste in IIS. Place a test.cfm and test.html in the web root of this website. As you mentioned that you have configured connector with All, then you need not to run the web server configuration tool. Add CFIDE and jakarta as virtual directories in this new website. Also, make sure that the ISAPI filter has a tomcat entry for this website as shown in the screenshot below. It should be there because you have configured with All so the tomcat entry should be at the server level and this new website will inherit the property from server.
You can also enable the detailed error for this test website and share the error which browser will return if you encounter the same issue Share the results for .cfm and .html returned by the browser.
HTH
Thanks
VJ

500 internal server error..plz help

hi,
since i started working on oracle apps...this forum has proved itself alt helpful...
i have performed a single node installation successfully over my laptop on win xp sp2 os.
alt of error generated bt in da end i always found a solution here...
guys like hsawwan are a great asset for this forum.....
may GOD reward u guys fr da job u r doing by helping others....
my recent problem has left me in a fix....
problem:
after a successful installation my system was working very fine ... i used the application and every thng seemed to work ok...
bt thren i restarted my pc nd this chaos started ....
first m receiving
500 internal server error...
thn a blank screen
now again 500 internal server error...
steps i performed
1-restarted db listener
2-Disabled Distributed JVM Cache by changing "LONG_RUNNING_JVM=" from "true" to "false" in the oc4j.properties.
reference =metalink Doc ID: 761869.1
plz help me get rid of this error.....
m nt an xpert .m a newbie.. so if u xplain in plain simple word i'l b grateful....
thanx thanx thanx in advance ....

HI
Sorry for late response ...
actually i performed the installation of 12R ON MY LAPTOP...
SORRY for posting it in 11I INSTALLATION issues...
my problem was solved by this action plan...
i am writing it here for some future reference ...
open a new shell and set your apps environment
then goto following directory -------->>> cd $ADMIN_SCRIPTS_HOME
stop this service ---->>> adopmnctl.sh stop
make a check if it is really down--------->>> ps -ef | grep <USER> grep opm (optional)
delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/* (optional but it would be better if u perform it)
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
again start the services ------>>> adopmnctl.sh start
restart your machine ....
this solution worked for my pc ...
note ** solution may differ for different users ....
thanks a lot helios and hsawwan for ur support .... :)

500 Internal Server Error - Unable to run a custom page from JDEV 10.1.3...

Hi
I am trying to run a Custom page from my JDEV. But i am getting the following error.
*500 Internal Server Error*
oracle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
Caused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.getnullThe base exception is:
Not able to create new database connection: FNDSECURITY_APPL_SERVER_ID
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
.... 54 more
I have checked the DBC file. The APPS_JDBC_URL was containing "\". I tried removing that but it dint worked. I checked whether i am using the right version of the JDEV patch, no issues with that also.
Kindly let me know the solution.
Thanks.
Edited by: user605470 on May 23, 2009 5:39 PM

Anoop
DBC file is not having any issues. Domain name seems to be correct.
DBC File
#DB Settings
#Fri Dec 19 12:54:03 EST 2008
GUEST_USER_PWD=GUEST/ORACLE
APPL_SERVER_ID=5D03027668AF2054E043A8920BA0205451873975540904546222829851405157
FND_JDBC_BUFFER_DECAY_INTERVAL=300
APPS_JDBC_DRIVER_TYPE=THIN
FND_JDBC_BUFFER_MIN=1
GWYUID=APPLSYSPUB/PUB
FND_JDBC_BUFFER_MAX=5
APPS_JDBC_URL=jdbc\:oracle\:thin\:@(DESCRIPTION\=(ADDRESS_LIST\=(LOAD_BALANCE\=YES)(FAILOVER\=YES)(ADDRESS\=(PROTOCOL\=tcp)(HOST\=<Host Name>)(PORT\=<Port #>)))(CONNECT_DATA\=(SERVICE_NAME\=<Instance Name>)))
FND_JDBC_STMT_CACHE_SIZE=100
TWO_TASK=<Instance Name>
JDBC\:processEscapes=true
FND_MAX_JDBC_CONNECTIONS=500
FND_JDBC_USABLE_CHECK=false
FNDNAM=APPS
FND_JDBC_PLSQL_RESET=false
DB_PORT=<Port #>
FND_JDBC_CONTEXT_CHECK=true
FND_JDBC_BUFFER_DECAY_SIZE=5
DB_HOST=<Host Name>
This is my DBC files. I have verified the values of <Host Name>, <Port #> and <Instance Name>. The seems to be correct. Is my error is related to the line which is highlighted ? Any inputs will be appreciated.
Thanks.
Edited by: user605470 on May 25, 2009 9:00 AM

500 Internal Server Error - Unable to run a custom page from JDEV 10.1.3.3.

Hi
I am trying to run a Custom page from my JDEV. But i am getting the following error.
*500 Internal Server Error*
oracle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
Caused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.getnullThe base exception is:
Not able to create new database connection: FNDSECURITY_APPL_SERVER_ID
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
.... 54 more
I have checked the DBC file. The APPS_JDBC_URL was containing "\". I tried removing that but it dint worked. I checked whether i am using the right version of the JDEV patch, no issues with that also.
Kindly let me know the solution.
Thanks.
Edited by: user605470 on May 23, 2009 5:27 PM

User,
You are not running JDEV, but OA Framework, hence you should use the OA Framework Forum to ask.
John

500 Internal Server Error in BI Publisher

Hi Guys,
Just started to use BI publisher. When I tried to export report from BI Answer in
Data Model >> General Setting >> Type: BI Answer
In the DETAILS I clicked on the flash light icon.
A new window popped up with the following Error Message:
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:C:\OracleBI\oc4j_bi\j2ee\home\application-deployments\xmlpserver\xmlpserver\persistence\_pages\\_saw__popup.java
Error: Could not find or load main class com.sun.tools.javac.Main
The URL looks unusual too: https://localhost/xmlpserver/saw_popup.jsp?f=
ALL I did recently was enable SSL encryption. Not sure if this mucked up the URL setting or this is something a bigger issue. I did Google around with the error code but couldn't find anyone having similar problem.
Would be greatful if someone can shed some light on this.
Many thanks.

Hi JAM,
No I didnt. I checked HTTP setting it was already set to HTTPS.
Error says it cannot compile some "saw__popup.java" and that could not load the main class.
when I googled the error code, other (non-BI) sites mentioned about JDK issue. I got the latest one JDK 1.7.0 so bit lost really.

Error 500--Internal Server Error - when deploying strust application

Hello everyone,
We have a large strust-based web application. The application is being deployed as an EAR file.
We are getting a NullPointerException when we deploy the application on Weblogic 8.1 in production mode. The exception
occurs when we access the application for the first time after redeployment.
When we restart the server entirely we do not get the exception anymore.
This exception does occur only rarely in development mode.
In production mode it occurrs every time.
Has anyone experienced similar issues?
Regards,
Oliver Enseling
Error 500--Internal Server Error
java.lang.NullPointerException
     at org.apache.struts.action.RequestProcessor.getServletContext(RequestProcessor.java:1136)
     at org.apache.struts.tiles.TilesRequestProcessor.processTilesDefinition(TilesRequestProcessor.java:180)
     at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:309)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1480)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:506)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at com.gelco.tmg.planning.web.core.action.URLSecurityFilter.doFilter(URLSecurityFilter.java:69)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6458)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

<[email protected]> wrote in message news:41c49d78$1@mail...
The problem seems to occur due to servlet reloading.... There seems to be
a bug that reloads the ActionServlet even without any changes made to the
code base... The reload fails for the ActionServlet making it null
Turn off servlet reloading in your weblogic.xml using
<container-descriptor>
<servlet-reload-check-secs>-1</servlet-reload-check-secs>
</container-descriptor>
Let me know if this helps ...The default is to check for every one sec... I am not sure whether these
kind of defaults make sense once a application is moved into production
mode...
If the issue gets resolved with the above suggested workaround .... let me
know... since the issue is spurious and I am trying to reach a higher
confidence level in the solution proposed by me.....
Thanks
Kumaraguruparan Karuppasamy
>
>
>
"Bill Turchin" <[email protected]> wrote in message
news:25319409.1102534305264.JavaMail.root@jserv5...
I am now also seeing that error having recently upgraded to WL 8.1. Has
anyone found the solution?

Error 500--Internal Server Error in BIPUBLISHER

Hi
we have installed OBIEE 11.1.1.5 along with this analytics/em/console/bipublisher come.I need to create one template using bipublisher.The thing is now analytics/em/console are working fine and created more than 40 reports and dashboards using this.recently i have started using bipublisher using oracle provided document i'm learning.
I face issue while creating Data Model in bipublisher.
Click on->New->Data Model throws me a *Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.*
Kindly provide me some input any setup need to done before starting up with creation of Data Model.
Thank in Advance
Padmini
Edited by: 954468 on May 21, 2013 2:51 AM
Edited by: 954468 on May 21, 2013 3:02 AM

Hi experts
Thank you for the response.
The issue is resolved.
In addition to the solution provided above followed and error throws in bipublisher.I also found in the logs of bipublisher throwing “access denied for user to path /users/weblogic”.
Solution:
1) Removed the weblogic folder and weblogic.atr from the installed drive (Oracle/Middleware/instances/instances1/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obips1/catalog/Your Catalog/root/users)
2)Restart the BI Services
3)Login using weblogic in bipublisher.
After this,I could able to create the Data Model in bipublisher.
Thanks,
Padmini
Edited by: 954468 on May 23, 2013 8:22 PM

New phone wifi issues, 500 internal server error

Similar Messages

Maybe you are looking for