New Pioneer DVR110D/Burn not supported

Systems Profiler: ATA-Bus 3, Pioneer DVD-RWDVR-110D, Revision 1.11, Drive Type CD-RW/DVD-RW, Disc Burning Not Supported, Removeable Media Yes, Detachable Drive No, BSD Name Disk 1, Protocol ATAPI, Unit Number 0, Socket Type Internal, OS9 Driver No. I have a Mac Power Graphics G4, OS 10.3.9. Disk Utility says DVD-RW is read only. I have installed Patchburn and Dragon Burn. I have reset PRAM and NVRAM. The computer does not show a CD when inserted in the 110D. The DVD disks OWC sent with my order result in "Disc drive not supported" and a long error number. I opened iLife 06 (a DVD) in the computer, copied it to my desktop, but don't dare install it until I can make a DVD copy of my photo library. I can burn nothing. I went back through 3 months of Apple DVD forum discussions, looking for answers. What do I do NOW? Thanks for any suggestions.

After running PatchBurn (for Panther) AppleSystemProfiler should report the drive as disk burning; supported (with a profile path listed). If this is not the the case, you need to run it again. The drive will not work with any Apple software without this profile.
3rd party apps don't need PatchBurn to function. You may in fact have a bad drive. If you cannot do a basic burn from the Finder after PatchBurn using media they supplied, I would ask for a replacement.
Check SysPref/Hardware/CD's&DVD's settings for blank media; if it is set to "IGNORE", the system will do just that.
DVD-/+R/RW can be burned from the Finder DVD-/+R DL can only be used in Tiger's Finder, or with 3rd party apps in Panther. iPhoto 5 does not append library burns like iTunes, so you have to manually choose the albums that fit within the 4.2GB disc capacity. maybe iPhoto 6 fixes this, I don't have it yet myself to check.

Similar Messages

  • Burning not supported????

    My friend's brand new (out of the box 2 days) iMac 1.8 G5 w/Combo fails to burn with error code 0x80020025
    stating burning not supported.
    any advice would be appreciated.
    entering this code in the search box reveals no listing
    I have also just noticed that there seems not to be any burning app anywhere
    oops never mind this last part I guess burning app is part of Disk utility.

    I was able to get good support via chat but I did not have enough blank cds to continue the trouble-shooting
    In a new user I can burn from the Finder and itunes and dik utility
    but from the main user and a second user
    there is no burning from the Finder.
    However I have verified that
    iTunes can burn audio and data and that DiskUtility can burn an image
    ...just no Finder burning from admin and other accounts
    I will try repairing permissions to see if it resolves this problem.
    Good Night to anyone out there

  • I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported

    I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported, Isk this of both 02 and apple, who's phone is this and what right do you have to lock a previously unlocked phone?  very angry

    Where did you get these phones?
    These and other forums are full of people with iPhone unlocking problems - the net result is that, as others have said, is:
    If you bought them from Apple they will be (and stay) unlocked.
    If you bought them PAYG from CPW then they will lock to the first SIM activated.
    Any other contract or PAYG phone iPhone bought from the networks WILL be locked by them too.
    However, all is not lost. The original purchaser can request for the phones to be unlocked by Apple, via the carrier. The carriers usually charge around £20 to do this, or gratis if you're out of contract.
    You are the original purchaser, right? If not, you need to get in touch with that person and pray they'll help you out.

  • Is there an easy way to switch from Entourage (MS Office email) to Apple email?  The new MS Office does not support Entourage.

    I am looking for a way to shift from Entourage (MS Office email) to the Apple system for email?  The new MS Office does not support Entourage.

    Philip if you can't find your answer in this forum try the Snow Leopard forum, Mail is considered part of OS X so you may have luck there.
    Also you also may want ot be more specific when posting. I'm assuming because you only mention Mail all you are interested in is switching to Mail or did you have more in mind?

  • Replaced bad superdrive with used ifixit model now burning not supported

    Hey,
    After using our computer as a dvd player for a year or so the superdrive was shot. I ordered a replacement from ifixit. It plays cds/dvds fine but will not burn. When I press the "burn" button in iTunes my computer says NOT SUPPORTED. ifixit sent me a TEAC DV-W28SLA that was SUPPOSED to work in my iBook.
    Does anyone out there know if this drive will even work in this computer and if so, how to make it happen. If this were a Windows machine I would try and find a driver online somewhere. But with OS X, I wouldn't know what to do with the driver if I found one!
    iBook G4   Mac OS X (10.3.9)  
    (NOTE: the Mac OS X (10.3.9) is just a guess, I have no idea what operating system I have. I can replace a superdrive but software gives me hives!)
    iBook G4   Mac OS X (10.3.9)  

    housingbubbble, Welcome to the discussion area!
    Checkout PatchBurn.

  • External Inland DVD Burner not supported for disc burning?

    Hello all,
    I have a G4 tower running OS 10.2.8. It is used for a recording studio and is in great working condition. I recently purchased an Inland external usb burner model op-2488x which says is compatible with mac os10.2 or higher. The drive is recognized by the computer and it reads dvds as well as cds but when i insert a blank dvd or cd to burn it will not allow me to open in the finder because it says "drive is not supported" I spoke with the tech support at inland and they told me that since the computer recognizes it that its not an issue with the burner itself and that it is something wrong with my os software. He said that there were no drivers and to check my system settings. Any advise would be a great help, thanks!

    Hi msg, and a warm welcome to the forums!
    Might try PatchBurn...
    http://www.patchburn.de/

  • The new 5.0 does not support the fox tab feature that I love and I need a similar compatible add on -- which do you suggest?

    I just uploaded firefox 5.0, which does not support the top sites feature I've used so happily. Is there a similar add on that does work with 5.0? I feel like I'm blind!

    The author of the Fox Tab extension has released version 1.4.3 which does, in fact, work with Firefox 5. It hasn't been formally reviewed yet, which is why you don't see it in the extension gallery by default. To get to it, click below:
    https://addons.mozilla.org/en-US/firefox/addon/foxtab/versions/

  • New sound cards do not support Vis

    Hey guys I've been hearing alot lately that Creative sound cards do not support Vista so I decided to register and ask a few questions about Creative sound cards and what would be compatible for me. I don't know if this is true but please someone clarify this with me. I just bought a PC but it does not have all the holes for my 5. speakers (only green hole) and I'm currently looking for a card that has the pink, green, grey speaker plug holes etc. If they do work, how much momey should I be spending on them? I need a card for movies and games. Will the X-fi work for me? It looks like it has all the coloured holes for my speakers. Which card do you guys recommend? Thanks.
    PC specs
    Vista Business Edition
    Core 2 duo .8ghz
    2gig ram?

    Basically Dragonrice the X-Fi works fine in Vista (I have one here on Vista x64), sadly some of the features such as DTS Decoding, DVD-Audio Decoding are XP Only.
    I beli've this maybe something to do with Windows Vista and it's DRM, or that Creative have not yet implimented support, or have decided against implimenting support since PowerDVD and the like do partial software decoding of those audio sources.
    X-Fi is ok on Vista, but is a more fully featured card on XP.
    If you are considering getting an X-Fi I would lean towards the Auzentech Prelude X-Fi based card, as it is more feature rich than the Creative Labs card (Supports Dolby Digital Li've Encoding), and can also decode DTS and DVD-Audio on Vista (x86 only)
    John

  • New Pioneer DVD drive not recognized in profiler

    I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
    I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
    A big thank you to anyone who can help me through this.

    Since your computer's Apple Hardware Test is on a disc and the built-in optical
    drive won't work, you may have to see if an external optical drive capable of
    being used as a boot, is available. This of course would be a FireWire combo
    type drive that can read & write DVD & CD media and boot Macs.
    You may have to see if you can archive anything worth saving from that eMac
    and put it on media via another computer; if the eMac can be booted into
    Target Disk Mode where it is seen by another computer as a FireWire drive.
    In fact, you could see (in a reverse scenario, perhaps?) if another computer's
    optical drive could be used by your eMac, if a second healthy computer is
    available & then boot it into FireWire Target Disk Mode to see if you can use
    the optical drive in there as though it were a peripheral. - This may not work.
    I've not had to really use FireWire Target Disk Mode, but do have cables,
    and an externally enclosed LaCie FW HDD which is partitioned for clones.
    There are times where a FireWire externally enclosed superdrive is handy.
    There may be some damage on the logic board or some circuit that does the
    controlling of ATA devices on one of the buses in the computer. That would
    be a possible cause of the issue. If the identity of this drive can be changed
    by the user before it is installed, be sure that is set correctly for use in eMacs.
    {The three eMacs I've owned, had issues early on and I got rid of them in mere
    days of first purchase; at considerable distance and effort by me. Then I got
    an iMac which was an unholy terror to debug after an 'authorized service' ctr
    did their best to kill logic boards and sell me defective store-brand RAM they
    were authorized to install in a place I was not. ThreeThousand Miles and Six
    Months later, I finally got my iMac back, repaired. Only because Apple told
    them to read my test notes - & just install the parts I said it originally needed.}
    Do you have a second Mac nearby (presuming yes, and using it online) which
    may be used to attempta further diagnostic or testing of the eMac?
    Not sure if an Apple Hardware Test would be sufficient to tell the issues in
    your computer; if you have a way to make use of it via external FW. Hope-
    fully someone with more extensive eMac and drive experience will advise.
    Good luck & happy computing!

  • External Pioneer 116 Burner Not Recognized

    My Pioneer 116 (Firewire) in a Bytecc case is now not recognized. Anyone else having difficulties? Printers work, don't see why this should have issues, but now I'm stuck using the internal Matshita, which I really don't want to use.

    Same problem with my Pioneer DVR-111D, tried the suggestion of switching from Firewire to USB, it works. Burned CD in iTunes, OK. Have not tried to burn DVD in The Burn Folder (my homemade iMovies). However, I did make 4 nice coasters last night until I found this post. OS 10.6 needs to work with Firewire connection.

  • New Wifi NIC card not supported

    So I have a DV4 4141us and I wanted to upgrade the wifi card to something that supports AC. So I bought an Intel AC wifi card that people said gave them good speeds. It was cheap and that makes me happy. I go to install it and Im getting an error 702. Im thinking maybe a BIOS update will help me out but all the changelog says about that is better memory management. Im wanting to know if there is a way I can install this bad boy wifi card. I would really hate to think Im screwed out of 802.11AC support. The model of the NIC is 7260HMW. Thanks. 

    Some people have had success with that module on some notebooks and many have not.
    Did you install the driver from Intel? 
    Check the BIOS mod websites.  You may be able to get a modified BIOS that suports the WIFIO module if you are willing to forgo your notebook's warranty to try to use the WIFI module.
    Don't forget that once you go down the modified BIOS route you are on your own.  You will have accepted complete responsibility for possibly making a brick out of your notebook by installing and using modified firmware. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I just tried downloading 4, replaced 3.6 with this new version that is not supported on my system. I'm using a Mac 10.4.11. I have lost the previous version that I was using. How can I get it back?

    I googled Firefox and tried to download the version I was using and it again downloaded this new version.
    I have no Firefox to use!
    Is there a way to get the 3.6 version back?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer you can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • Mathita UJ-8455 does not support burning?

    Hi, just acquired a 15" aluminum powerbook, 1.33GHz. This has osX 10.3.9 on it. In System Profiler, under Hardware>ATA>ATA-3 Bus>Disc Burning there is a entry that reads:
    Disc Burning: Not Supported
    I thought all of these had at least a combo drive, the entry just above this says this is a CD-RW/DVD-RW. So why is disc burning not possible? When i put a blank disc in it can give me various ways to come to the same conclusion but usually it just spits them back. Any ideas?

    Was the optical drive ever replaced. The UJ-845S is a later model. It is possible that as it has OSX 10.3.9 that there is not a driver in the system installed for the UJ-845. Just a guess.
    If this is a after market replacement drive you will find it should not only read RAM but also write to a RAM disk. The Apple version has cripple firmware so the drives will only read RAM disks.
    I have an UJ-845S in an external case and it shows "Burn Support Yes (Unsupported)" and I burn just fine.
    You could try Patch Burn.
    MJ

  • NEC burners: not supported?

    "No supported Disk burners found"
    Toast can recognize new external dvd-cd-rw but iTunes refuses to do so!
    anything new on the subject?
    this is very frustrating: easy "plug & play" situation.. not any more?
    In the system profiler (iMac DV, G3, Graphite) it recognizes the writer but says:
    Model:     _NEC DVD_RW ND-3520A
    Drive Type:     CD-RW/DVD-RW
    Disc Burning:     Not Supported
    Any suggestions anyone?

    Hello Christina,
    Have you tried using PatchBurn: http://www.patchburn.de/download.html
    Perhaps that'll fix the burning problem in iTunes.

  • In my nokia asha 306 not support higer quality vid...

    Hey
    sir what is this in old software all high quality videos are supported but in new software high quality not supported i want good video player

    This has happened with my Nokia Asha 306. It had version 3.81 and it was playing this video very well but after I have had updated it to version 7..42, that very same video is not played properly. Its video is not visible with the message that the video is of higher resolution. But then how does that video was being played in version 3.81 correctly?
    My product code is:
    059L900: RM-767 MEA_MAA_RED_NULL_PK
    SW version: 07.42     variant: 33
    I hope that support people would convey this to developers so that in the next version this is resolved.
    I tried attaching that video that I was able to play in Nokia Asha 306, SW version 3.81, but could not.
    This information is what I get from GOM player when I play this file:
    [Ver. 2, 1, 50, 5145(EN)]
    *** DIRECTSHOW FILTER LIST ***
    1. Default DirectSound Device
    2. VMR9 - Renderless mode
    3. Gretech Video
    4. Gretech Audio
    5. Microsoft DTV-DVD Audio Decoder
    6. Gretech MP4 Source
    *** VIDEO INFO ***
    Input Type : mp4v(GVC)
    Input Size : 320 x 240
    Output Type : YUY2
    Output Size : 320 x 240
    FrameRate(Frame/sec) : 0.00 (25.00)
    *** AUDIO INFO ***
    SampleRate(Sample/sec) : 44100
    BitRate(Bit/sample) : 16
    Channels : 2
    KBitRate(KBit/sec) : 1411
    So it is clear that the video is 320 x 240 and it was played correctly before ver 7.42.
    We need that ability back.
    Thanks

Maybe you are looking for