New Playback Error
I have recently been having trouble with a shockwave movie
that I have posted on the web. I have been encountering an error
message that reads:
“This Shockwave movie has errors that have caused
playback problems. Please contact the author of this content
regarding this problem. Shockwave is unable to continue”.
The problem is that I have had this movie posted for several
years now and I have never had this issue with it before, the file
has not been modified in any way. Furthermore the error seems to
come and go periodically. The error message will appear whenever
you attempt to access the Shockwave movie for several hours but if
you wait and revisit the site the error will disappear and the
Shockwave movie will load without any issues. I have tried
recompiling the original .drc file in Director however I cannot
find any obvious errors in the code. I have encountered this issue
on a windows Vista machine using both Firefox 2.0 and IE 7. I
noticed that there has recently been an update to Shockwave player
and I am wondering if this has anything to do with my problem. Has
anyone else been encountering issues similar to this? Any ideas or
suggestions would be greatly appreciated. The Shockwave file is
posted at:
http://www.psych.ualberta.ca/~ITL/InformationLiteracy/WebPages/WritingAPA.htm
My only experience with this kind of message was when disk
space was very
low. So if it's on a server that could be a problem but I
really only
experienced it when movies were played locally. I haven't
seen it in a
while because my new machine has oodles of disk space.
"Nickname_375" <[email protected]> wrote in
message
news:freccj$f7l$[email protected]..
>I have recently been having trouble with a shockwave
movie that I have
>posted
> on the web. I have been encountering an error message
that reads:
> ?This Shockwave movie has errors that have caused
playback problems.
> Please
> contact the author of this content regarding this
problem. Shockwave is
> unable
> to continue?.
> The problem is that I have had this movie posted for
several years now and
> I
> have never had this issue with it before, the file has
not been modified
> in any
> way. Furthermore the error seems to come and go
periodically. The error
> message will appear whenever you attempt to access the
Shock wave movie
> for
> several hours but if you wait and revisit the site the
error will
> disappear and
> the Shock wave movie will load without any issues. I
have tried
> recompiling
> the original .drc file in Director however I cannot find
any obvious
> errors in
> the code. I have encountered this issue on a windows
Vista machine using
> both
> Firefox 2.0 and IE 7. I noticed that there has recently
been an update to
> Shock
> wave player and I am wondering if this has anything to
do with my problem.
> Has
> anyone else been encountering issues similar to this?
Any ideas or
> suggestions
> would be greatly appreciated. The Shockwave file is
posted at:
>
http://www.psych.ualberta.ca/~ITL/InformationLiteracy/WebPages/WritingAPA.htm
>
>
Similar Messages
-
My new ZenMicro Photo says "playback error" HELP MEEE
OK. so I've already posted something about this. but it didn't get any replies. so I'm going to be obnoxious until i get a reply. because I WANT TO LISTEN TO MY MUSIC.
heres the deal: I ordered my ZenMicro Photo, it came in the mail yesterday, I followed all instructions exactly, put my music on, started listening to it with no problems, then this morning it decided to flash "PLAYBACK ERROR" 3 seconds into every song it possibly could.
I use Comcast Rhapsody for music, which requires a weekly(ish) sync with the player to renew liscences. so I thought "well I'll just sync it up. maybe thats what is bugging it out" but NO. its not. so...
HELP ME! anyone?Hi,
I had the same problem with recieving the "playback error" message after?a few?seconds when playing Rhapsody tracks on my Creative Zen Microphoto. After finding no help, I messed with settings till I discovered the problem.
Go to Tools->Preferences->Devices
Check both boxes for caches in Advanced Transfer Options
Then click the Advanced Settings In Transfer Settings allow Rhapsody to choose the best quality.
Bad news is you'll have to delete and redownload anything you want on there, good news is you can use your MP3 player.
Good Luck -
My safari keeps crashing and my youtube keeps getting playback errors. Help!
I am currently usin an iPod 4th generation with IOS 6.1.5. Whenever I open up the safari app, it will stay blank and crash after about a minute or so. Following, I cannot watch videos on my YouTube app beecause it keeps receiving a playback error. I have already shutdown my iPod as well as reseting all settings. I have tried nearly everything but nothing has changed. Please help!
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and Clear Cookiers, Histoiry and Data
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
For YouTube:
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I get playback error messages every time i try to watch ant video on internet
SO i have this problem with Internet videos for example: YouTube, and other sites which contains videos. I have tried to download YouTube app but I still get those error messages "playback error", I am using video downloader pro to download videos, but the problem is that I can't watch them... I don't get this problem when trying to view videos IN my iPod though. I think this problem may caused that I have gave my friend to crack my iPod because before cracking it everything was fine. I havent tried to restore my ipod yet. Is there a way to solve this problem? Please help
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I am having a playback error prblem.
i am having a playback error prblem,i.e i m not able to play any of the video online neither in chrome nor in safari.Infact my safari is cracking as i m opening it,i m not able to even type a site on it as it closing in around 2-3 sec automatically.
What can i do now???Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and Clear Data, History and Cookies
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Youtube app giving playback errors
I updated this app to the latest just a little while ago, and have been able to play videos on it until tonight. Now for some reason no matter what video I click on, and it can be completely random, it gives a gray background with a cat's head shadow on the background and says "playback error".
What's going on? My internet is usually fine for videos so I don't know why it would be picky now. Is anyone else having trouble with this app?See:
iOS: Troubleshooting applications purchased from the App Store
Try when connected to another network to help determine if it is a network problem
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Hi all, Can anyone help me with this problem?
I have created a master detail table but have had problems with adding new detail lines.
The detail region contains an advanced table with an addTableRow bean set in the footer. I wish to navigate to a new page when the ‘add new row’ button is selected so I have set the ‘insert rows automatically’ property to false. I have been able to capture the event in my controller and call the new page and then access the application module, however I do not seem to be able to set a property in the new child line from an attribute in the parent line.
//in my AM I have called…
public void CreateLine()
//get child vo that is to have line added
DoiLinesVOImpl vo = (DoiLinesVOImpl) getDoiLinesVO1();
if (!vo.isExecuted()) vo.executeQuery();
//find parent vo to determine which questionId the line relates to
OAViewObject hvo = (OAViewObject)findViewObject("DoiDecQuestionsVO1");
OARow hRow = (OARow)hvo.getCurrentRow();
Number sid = (Number) hRow.getAttribute("QuestionId ");
System.out.println ( " qid= " + qid );
if ( vo != null)
vo.setMaxFetchSize(0);
Row vRow = vo.createRow();
vo.insertRow(vRow);
vRow.setAttribute("QuestionId",qid);
vRow.setNewRowState(Row.STATUS_INITIALIZED);
Initially the page was running, however it was only ever showing the id for the first line, regardless of which child table I was select add new line on. Now the new page errors and when I click on exception details the page does not show any error details
Can anyone see anything wrong with the code in the AM or have any suggestions as to what else may be wrong. Is it actually possible to do what I am trying to do? My aim is to have a table of questions and then a table region under the detail region of each question. Either no lines, one line or multiple lines can be added under each questions details. The questions may have slightly different required fields so I would like to navigate to a new page and then back to the main page when save is selected.
Any insights into what I am doing wrong or how I might achive my requirement would be very much appreciated.
Mike.Ok, I have now got the page to stop erroring.
I have created a new VO instance of the child EO in the application module and used the new vo in the seperate create page attributes, however when I query the current row against the parent vo I am still getting the value from the first line, not the selected parent line.
mike. -
New-AzureDeployment - Error while copying content to a stream
Hi All,
I am trying to deploy a packages using the Azure Powershell Cmdlets.
Each time I try to deploy a particular package, I get the following error message..
New-AzureDeployment : Error while copying content to a stream.
At line:1 char:1
+ New-AzureDeployment -DoNotStart -ServiceName $strStagingCCPDeploymentServiceName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-AzureDeployment], HttpRequestException
+ FullyQualifiedErrorId : System.Net.Http.HttpRequestException,Microsoft.WindowsAzure.Commands.ServiceManagement.HostedServices.NewAzureDeploymentCommand
Looking at the inner exception I am getting
Unable to read data from the transport connection: The connection was closed.
The package itself is only 80mb and uploads to my blob storage successfully however when it tries to deploy using my config file the error occurs. The same config file works fine if I use the Azure Website to deploy the package, rather than the cmdlets
and I can deploy other packages successfully using PowerShell and using Visual Studio.
Thank you for any help you can provide.Hi,
This seems to be a network issue, but it's quite strange as you can deploy the package from Visual Studio. Could you please try it on another machine (in another network environment if possible)? Also, can you try
to write a program and call the management API (http://msdn.microsoft.com/en-us/library/windowsazure/ee460813.aspx) to deploy it?
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me
That's a peculiar one to get in the context of a QuickTime uninstall.
Which particular version of QuickTime for Windows are you currently running? (7.7.5, 7.7.4, something earlier?) -
Since yesterday all you tube videos is giving playback error message
I know I'm replying to an out-dated post. But problems are never outdated.
I had done all the above too. But the answer to my problem was to change the DNS server number (should have done this first when the "playback error" persisted.:/). Take a screenshot of your original DNS number for future necessity, then change it to OpenDNS..or google DNS...I used google DNS...for complete & thorough instructions..follow this site:--> http://www.macinstruct.com/node/558
Edit -
Playback error keeps popping up
Students download podcast from itunes U and playback error pops up? What to do?
I have the same problem. Started on 10/13/14. Tried restore also. Ran AVG scan ,,, nothing showed up. Is there a fix. This is slowing down my HP G4 Pavillion and it is hard to keep upwith all the pop ups.
-
No session found with status "New" or "Error"
Hi,
I put the statement after the CLOSE GROUP to process the BDC automatically:
SUBMIT RSBDCSUB AND RETURN
EXPORTING LIST TO MEMORY
WITH MAPPE = SESSION.
WITH VON = SY-DATUM
WITH BIS = L_NEXT_DAY
WITH Z_VERARB = 'X'
WITH FEHLER = ' '.
And when I ran it I got an error that says
<i>No session found with status "New" or "Error"</i>
When I go to SM35, I see the session in the 'New' tab. How can I get this to process completely without manual intervention or first thing first no error from running the program?
Thanks,
WillHi Rob,
I will try the COMMIT. I think because I processing mutltiple GS01 transaction in one program.
Hi Sudheer,
I am actually usinng the INCLUDE that was given to me when I did the recording. Here is the complete code from the include.
***INCLUDE BDCRECX1.
for programs doing a data transfer by creating a batch-input session
and
for programs doing a data transfer by CALL TRANSACTION USING
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SESSION RADIOBUTTON GROUP CTU. "create session
SELECTION-SCREEN COMMENT 3(20) TEXT-S07 FOR FIELD SESSION.
selection-screen position 45.
PARAMETERS CTU RADIOBUTTON GROUP CTU. "call transaction
SELECTION-SCREEN COMMENT 48(20) TEXT-S08 FOR FIELD CTU.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S01 FOR FIELD GROUP.
selection-screen position 25.
PARAMETERS GROUP(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) TEXT-S05 FOR FIELD CTUMODE.
selection-screen position 70.
PARAMETERS CTUMODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S02 FOR FIELD USER.
selection-screen position 25.
PARAMETERS: USER(12) DEFAULT SY-UNAME. "user for session in batch
SELECTION-SCREEN COMMENT 48(20) TEXT-S06 FOR FIELD CUPDATE.
selection-screen position 70.
PARAMETERS CUPDATE LIKE CTU_PARAMS-UPDMODE DEFAULT 'L'.
"S: synchronously
"A: asynchronously
"L: local
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S03 FOR FIELD KEEP.
selection-screen position 25.
PARAMETERS: KEEP AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) TEXT-S09 FOR FIELD E_GROUP.
selection-screen position 70.
parameters E_GROUP(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S04 FOR FIELD HOLDDATE.
selection-screen position 25.
PARAMETERS: HOLDDATE LIKE SY-DATUM.
SELECTION-SCREEN COMMENT 51(17) TEXT-S02 FOR FIELD E_USER.
selection-screen position 70.
PARAMETERS: E_USER(12) DEFAULT SY-UNAME. "user for error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) TEXT-S03 FOR FIELD E_KEEP.
selection-screen position 70.
PARAMETERS: E_KEEP AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) TEXT-S04 FOR FIELD E_HDATE.
selection-screen position 70.
PARAMETERS: E_HDATE LIKE SY-DATUM.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) TEXT-S10 FOR FIELD NODATA.
PARAMETERS: NODATA DEFAULT '/' LOWER CASE. "nodata
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) FOR FIELD SMALLLOG.
PARAMETERS: SMALLLOG as checkbox. "' ' = log all transactions
"'X' = no transaction logging
SELECTION-SCREEN END OF LINE.
data definition
Batchinputdata of single transaction
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
DATA: E_GROUP_OPENED.
message texts
TABLES: T100.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
open dataset *
FORM OPEN_DATASET USING P_DATASET.
OPEN DATASET P_DATASET
FOR INPUT IN TEXT MODE
ENCODING DEFAULT.
IF SY-SUBRC <> 0.
WRITE: / TEXT-E00, SY-SUBRC.
STOP.
ENDIF.
ENDFORM.
close dataset *
FORM CLOSE_DATASET USING P_DATASET.
CLOSE DATASET P_DATASET.
ENDFORM.
create batchinput session *
(not for call transaction using...) *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING CLIENT = SY-MANDT
GROUP = GROUP
USER = USER
KEEP = KEEP
HOLDDATE = HOLDDATE.
WRITE: /(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM.
end batchinput session *
(call transaction using...: error session) *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
E_GROUP_OPENED = ' '.
ENDIF.
ENDIF.
ENDFORM.
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE.
DATA: L_MSTRING(480).
DATA: L_SUBRC LIKE SY-SUBRC.
batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING TCODE = TCODE
TABLES DYNPROTAB = BDCDATA.
IF SMALLLOG <> 'X'.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
call transaction using
ELSE.
REFRESH MESSTAB.
CALL TRANSACTION TCODE USING BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO MESSTAB.
L_SUBRC = SY-SUBRC.
IF SMALLLOG <> 'X'.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
LOOP AT MESSTAB.
SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
L_MSTRING = T100-TEXT.
IF L_MSTRING CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ENDIF.
CONDENSE L_MSTRING.
WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
ELSE.
WRITE: / MESSTAB.
ENDIF.
ENDLOOP.
SKIP.
ENDIF.
Erzeugen fehlermappe ************************************************
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING CLIENT = SY-MANDT
GROUP = E_GROUP
USER = E_USER
KEEP = E_KEEP
HOLDDATE = E_HDATE.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING TCODE = TCODE
TABLES DYNPROTAB = BDCDATA.
ENDIF.
ENDIF.
REFRESH BDCDATA.
ENDFORM.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM.
Thanks
Will
I awarded points to everyone. Thanks so much.
Message was edited by:
Will Ferrell -
Hello,
I am troubleshooting playback errors in Cap 2 exes that
contains imported .swf and .avi files.
Errors: The exe will play back correctly any number of times.
Then, stops playing back correctly. I don't think this behavior
begins to occur until the first time a user interacts with the
playeback controlm but I cannot confirm that. After that, all bets
are off, even with complete restarts of the exe. Errors include
animation restarting, but not completing (most common error),
animation not restarting correctly, audio cutting in and out ,or
double audio. Even better, behavior on playback is intermittent.
After demonstrating incorrect behavior, another attempt from
restarting exe plays back correctly, or it will display different
or more extensive problematic behavior.
Movie Characteristics: Animation starts .05 seconds after
timeline start in some movies, at 0.0 in others. Animation is on
the first slide in most cases. Some movies mix .avi files with .swf
files. Others contain .swfs only. Some avis and swfs have click
boxes or highlight boxes associated. Original movies shot in
hypercam as .avi, then converted to .swf in Flash before import.
Not sure why some movies are imported as .avi...will pursue with
developer.
Troubleshooting so far: Assured that animation and slide
timing match. Assured that incoming video fps rates match movie fps
rates. Validated that click boxes are active through end of slide
timeline. Scouring the discussion threads.
Quick fix without trying it yet is to remove playback
control. However, this is not a solution. This is an extensive
series of topics that mix Cap slides with learner interaction. Want
to deliver playback control if at all possible.
Appreciate any and all insight and guidance.
Thanks in advance,
Robbin
Troubleshooting so far:
Movie Characteristics:
Observations:
Errors:We managed to fix the problem by deleting the photo transitions and doing them a dfferent way. I'll keep this thread bookmarked for the future, though, if we run across this problem again. Thanks!
Upon further testing, our problem is not resolved, now it will play through all the picture changes, but freeze on teh last one, while the audio continues. I looked into your suggestions, but it still doesn't work. -
I cannot open elements 8 on new imac error message 150:30 appears. any suggestions?
See if this helps:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html -
Zen Micro 'Playback Error' Mess
i'm currently using the beta firmware 2.0.05 and occasionally while playing back songs, i get the message 'playback error'. although i see this message, the song does play without any apparent errors/problems. does anyone know what this error message means?
i have firmware v. .xxx..... and i get that playback error message too, so i investigated and found out it was only for one song. So i decided to just have my friend send me his version of the song and it worked. so i'm guessing its the song thats messed up even though it will work fine on wmp0 or winamp.. etc.
Maybe you are looking for
-
Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70. Please help!
-
Read this http://www.digit-life.com/articles2/gf4/geforce4-tv-out.html Edited due to bad link . Used Maesus's link instead so you will see the same thing lower in the thread.
-
Hi There , As I had earlier posted in the forum that I am planning to go for SAP -QM certification & I am perparing for the same....... Can anyone please tell me from where I can get some real queation that can appear or has apperaed in the certifica
-
Final Cut Express 3.5.1 vs 4.0 on an OS 10.5- which to buy?
I have read many views that the FC Ex 4 is a downgrade from the 3.5 in reality. I was wondering if I should just buy the 3.5.1 version for my OS 10.5? Thoughts?
-
Filtering data based on Z field in BUT000 while running CRMM_BUP_SEND.
We have a Z field in BUT000. So while executing CRMM_BUPA_SEND i want to filter the data in BDOCs ( BUPA_MAIN and BUPA_REL ) based on this Z Field in BUT000.Can you guys provide your inputs?