New plugin not work on apache2.0.39

the new plugin in weblogic6.1 sp3 for win2000 is not work on apache2.0.39,but work
on apache2.0.36.how to get the plugin work for 2.0.39?
thank!

Your reply did not help me access an update to JAVA to work with 10.8.3 to play JAVA related games. This is a REAL PROBLEM! As I subscribe to game websites and my family cannot play these games. I have contacted Apple Support and we tried uninstalling JAVA and reinstalling it from JAVA .com. We made sure my computer (IMAC) was set up to accept JAVA was turned on and I still have the same problem. JAVA related games will not play. The error message says "An updated JAVA has not been detected" So what am I to do? Who can help me with this type of problem? Apple Support asked me to contact JAVA by phone 1-800-223-1711 but they do not have any phone support. I was directed to a site called Live Support" and they charge $80.00 to resolve problems for an Apple computer or $1.00 a minute. Great choices! I accepted this offer however Apple will not allow third party developers to help. Do you have any ideas that will really help me?

Similar Messages

When I updated to Firefox 4 new plugins not working

the only way I got it working was by installing Add on Compatibility Reporter .....

Add on Compatibility Reporter shouldn't have any affect on plugins, only extensions.

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (windows)

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (win64), where can I get a module that works?
I get this error from Apache :
C:\www\Apache2.4\bin>httpd -t
httpd: Syntax error on line 741 of C:/www/Apache2.4/conf/httpd.conf: Syntax error on line 2 of C:/www/Apache2.4/conf/mod_jk.conf: Cannot load C:\\ColdFusion10\\config\\wsconfig\\1\\mod_jk.so into server: The specified procedure could not be found.
I have already tried manually extracting the pre-built mod_jk22.so from the wsconfig.jar with same results.
If I switch to Apache 2.2.22 64bit, it does work. what I need is to be able to run on Apache 2.4.

Please check out this link.
http://rob.brooks-bilson.com/index.cfm/2012/2/21/Installing-ColdFusion-10-with-Apache-on-W indows
In this link, they are configuring with Apache 2.2 only.
When we were working colfusion 9 with Linux and apache, we had the same problem, it will work when it connect to Apache 2.0 but not with Apache 2.2 version.

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

NIK plugins not working with LR4.

Installed LR4 and then NIK software plugins not working. Get the error "bad argument#1 to 'lower' (string expected, got nil).
Downloaded the latest updates from NIK and have same error.

You might try this active thread, with the same title as yours
http://forums.adobe.com/thread/971432?tstart=0

Quick look 3rd party plugins not working

The 3rd party plugins not working. Illustrator, Folder view, and quark are the three I use. They worked nice in 10.5.x Tried /Library/quicklook/ tried /user/library/quicklook/ even forced into system/library/quicklook/
Anybody else use these or any other 3rd party plugin?

I can confirm that Folder View plugin no longer works. the developer discusses it here
http://www.flickr.com/photos/t_trace/2060171212/
but I can't understand if they figured out how to fix it or not.

Quicktime Plugin not working in Browers

Hello,
I am having a frustrating problem with my quicktime plugin not working in BOTH Safari and Firefox. When I try to watch my a quicktime link on the web I cannot view it, I get the quicktime icon with the question mark. However, when I log in as a different user and goto the same link I can view the movie. I believe the movie is a mp4.
I have already deleted my quicktime preferences and also tried to boot up in 32 bit mode.
Any suggestions to what may cause this? This must be something that is specific to my user. I have also removed perian and deleted perian preferences.
Please Help!
Running
Mac OSX
10.7.2

I have scoured the internet looking for a way to play MP3 files right in the browser window and have come up with nothing. Firefox does not let me set MP3 files to play with the QuickTime Plugin but instead I can only have them play in iTunes or QuickTime after a download. Pretty much same with Chrome and Safari. Neither will let me just play the MP3 right in the browser. Please help!

Weblogic Http Apache Plugin not working

Hi,
I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
http://e-docs.bea.com/wls/docs103/plugins/apache.html
but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
http://localhost:80/weblogic/
Here is my httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7001
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
ProxyRequests On
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "logs/access.log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
images shows. Any help is appreciated.
Thanks

Hi,
There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
Regards,
Dinesh

PhpMyAdmin Google reCAPTCHA v2 plugin not working

I secure my phpMyAdmin login page using Google reCAPTCHA. Until recently, phpMyAdmin used the old v1 API of reCAPTCHA, but now uses the newer v2 API as of version 4.40.
For some reason, I cannot get the new reCAPTCHA v2 API to accept my credentials to initiate a login. When I enter my correct username, password, and solve the CAPTCHA correctly, the page hangs for a few minutes and then spits out the following error messages:
Warning in ./libraries/plugins/auth/recaptcha/recaptchalib.php#94
file_get_contents(https://www.google.com/recaptcha/api/siteverify?secret=MYSECRETKEY&remoteip=127.0.0.1&v=php_1.0&response=RESPONSE-TOKEN-FROM-RECAPTCHA): failed to open stream: Connection timed out
Out of curiosity, I tested the reCAPTCHA URL generated above by copying and pasting it into my browser, and the following error message popped up:
"success": false,
"error-codes": [
"missing-input-response"
The error codes are generated by the API when the verification fails. According to the Google Developer site for the reCAPTCHA API, an error code of "missing-input-response" means "The response parameter is missing." The response parameter is not missing, however, if the URL is to be believed, so I'm confused as to why the error is occurring.
I tried to resolve the problem by generating a new reCAPTCHA key pair for my domain (did not work), and by editing phpMyAdmin/libraries/plugins/auth/AuthenticationCookie.class.php to explicitly include the key pairs in the code as opposed to having them be pulled from config.inc.php in the main phpMyAdmin working directory where they are defined using:
$cfg['CaptchaLoginPublicKey'] = 'PUBLIC-KEY';
$cfg['CaptchaLoginPrivateKey'] = 'PRIVATE-KEY';
This did not work, either.
Is anybody else who uses reCAPTCHA with phpMyAdmin experiencing the same problem with the upgrade to reCAPTCHA v2? Or is there a possible bug in the recaptchalib.php configuration file for v2? I have also asked the same question on Stack Overflow, which is supposedly where phpMyAdmin support is now handled according to the phpMyAdmin official site, but have not received any responses yet. Any and all feedback would be appreciated.
Last edited by cmorgenstern (2015-04-11 23:46:05)

I already have openssl.so uncommented in my php.ini file, so I don't think that's the problem. Thanks for the suggestions, though.
My setup is remotely accessible via a web server. The only symlink I have is from /etc/webapps/phpmyadmin/config.inc.php to /usr/share/webapps/phpmyadmin/config.inc.php so that phpmyadmin can find the config file when logging in. Is that what you're referring to?

After update Gedit and Epiphany plugins not working anymore

Gedit and Epiphany plugins stopped working after recent update. They are listed in plugin dialog, but can't be enabled. Does anybody know how to solve this problem?

I was able to successfully enable the plugins by re-compiling gedit using the ABS system.
However, I do think this is a bug, and that we should report it. I'm unfamiliar with that
process as well. If anyone can post a quick suggestion as to the best place to file a bug report,
I would appreciate it :-)
In the meantime, here's what I did. This was my first time using the ABS system, so
I went to http://wiki.archlinux.org/index.php/ABS All the below instructions are on the wiki,
these instructions are specific to gedit:
I installed abs using pacman.
# pacman -Sy abs
I edited /etc/abs.conf, and put a ! in front of the testing REPOS:
REPOS=(core extra community !testing)
As root, I ran
# abs
A bunch of stuff was downloaded to my /var/abs folder.
I make a directory in my home folder for gedit's stuff:
$ mkdir -p /home/yourusername/abs
I copied gedit's stuff from /var/abs to my abs folder:
$ cp -r /var/abs/extra/gedit/ ~/abs
$ cd ~/abs/gedit
I ran makepkg -s
$ makepkg -s
A bunch of stuff downloaded and compiled. When it was done, there was a new gedit-2.24.3-1-i686.pkg.tar.gz file in the same directory.
I told pacman to install the tar.gz file. Note that I did not have to uninstall gedit.
As root:
# pacman -U gedit-2.24.3-1-i686.pkg.tar.gz
And that was it! I could then go into gedit and enable/disable whatever plugins I wanted.
Hope this helps,

Sample plugins not working with Netscape 7 on Solaris 8.

I'm trying to build a scriptable plugin for deployment into Netscape 7
and Solaris 8.
I finally got mozilla 1.4.1 built under Solaris 8 and deployed the
plugin from modules/plugin/tools/sdk/samples/simple. By deployed I
mean that I copied the libnpsimple.so file to the netscape plugin
directory and copied the .xpt files to the netscape components
directory. I even removed the xpti.dat file from the netscape
components directory so that it will get regenerated when netscape 7
is started.
I started up netscape 7 and checked about plugins and I find the
simple plugin in the list of enabled plugins. So far, so good.
I open the test.html file in modules/plugin/tools/sdk/samples/simple
into the browser and click on the version button and I get an alert
box that displays "undefined". Also, if I reload the page netscape
crashes.
I also tried the scriptable sample plugin with essentially the same
result.
Does anyone know what I need to do to get a sample plugin to work with
Netscape 7 on Solaris 8.
Some help would be very much appreciated.
Thanks.

Start by fixing the Xhtml coding errors:
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.frontiers.uk.net%2F&charset=%28detect+a utomatically%29&doctype=Inline&group=0
And CSS errors:
http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.frontiers.uk.net%2F&warn ing=1&profile=css21&usermedium=all
Your 50% site stats probably include Mozilla/Firefox users.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"pawpour" <[email protected]> wrote in
message
news:fbghtk$o3s$[email protected]..
> Hello everybody
>
> My site is up at www.Frontiers.uk.net. I used
Dreamweaver CS3, with CSS,
on a
> Mac.
>
> It seems to work fine in IE 6 & 7, Firefox and
Safari. When doing a
browser
> compatibility check, I get one error: "Double float
margin bug", which it
says
> affects IE 6. I don't think this is causing a problem.
>
> However in Netscape (I've only tried version 7) the site
looks terrible -
the
> right hand link in the navbar drops down to the second
line.
>
> Also, there are two DIVS, one floated left and one
floating right, and in
> Netscape the right one drops underneath the other. I
know that there can
be
> problems with IE 5, in its dealing with margins but I
havent heard
anything
> about Netscape being a problem? Also I thought that the
IE box model bug
can
> just make the DIVS narrower, not make one drop below the
other.
>
> Dreamweaver isn't throwing up any browser errors for
Netscape.
>
> I thought that hardly anyone would use Netscape, but the
stats for my
site say
> that around 50% of users are using Netscape (which i
find hard to
believe!)
>
> Any ideas what I've done wrong or how to fix this for
Netscape?
>

Solaris Sparc 10, Firefox 3.6, Java v6 update 18 plugin not working

The java plugin (v6 update 18) for Firefox 3.6 on Solaris Sparc 10 is not working for me.
$ pwd
/opt/sfw/lib/firefox/plugins
$ ls -l
total 19606
-rwxr-xr-x 1 root root 9982480 Feb 17 10:34 libflashplayer.so
lrwxrwxrwx 1 root root 54 Feb 17 11:03 libjavaplugin_oji.so -> /usr/jre1.6.0_18/plugin/sparc/ns7/libjavaplugin_oji.so
-rwxr-xr-x 1 root root 42704 Jan 17 06:31 libnullplugin.so
The Shockwave Flash plugin shows up in the Add-ons/Plugins window but java does not.
Any suggestions?

Obviously Sun (excuse me, Oracle) does not intend to support the solaris-10/sparc/firefox-3.6 combination. Firefox 3.6 requires the NPAPI and/or NPRuntime interfaces to java, but oracle does not provide the new "libnpjp2.so" java plugin with the jre-6u18-sparc-solaris java download.
A search at www.oracle.com does not turn up any support announcement about this. You have to learn it the hard way. :(
If you want to continue to use sparc-solaris, downgrade to firefox-3.5 so you can use the old libjavaplugin_oji.so module. Otherwise run Linux or Mac OS X to stay in the unix camp.

New firefox not working well at all!

Since this new version Firefox takes an excessive amount of time to start up, and seems to crash all the time. Trying to go to my bank every time tried to input, user name etc screen would fade and would get message "Firefox not responding". Other things noted does not open my home page when I start, this just started to happen today. Was not opening my home page when I opened another tab, that was from install, Just does not work for me would like to keep using but if I cant even go to my bank then there is no point.

If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

SB X-Fi Extreme new driver not working

Win 7 64 bit , Dell XPS 730. The atoprogram installed new drivers( A very large file) and now th esoundsystem does not work? a lot of noise and low level. Anyone any suggestins? Thanks Curt

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

WSAD 5 / Eclipse plugin not working

I have installed the Kodo plugin into my Websphere Application Developer
5.1.0 environment. I have configured the Kodo preferences and selected "Add
Enhancer to Build" for my project.
Still, the other items on the Kodo menu remain grayed out ("Enhance
Metadata", "Refresh Mappings", etc.). Can anyone tell me what I'm doing
wrong?
Thanks in advance,
Kevin Keigwin
Architect
SellCore

Hi,
there is a typo in the plugin.xml file for the Kodo plugin.
change the following line -
<library name="jakarta-commons-logging-1.0.2.jar"/>
to -
<library name="jakarta-commons-logging-1.0.3.jar"/>
and restart Eclipse.
Should do the trick.
Simon
"Darville" <[email protected]> wrote in message
news:bfo9s9$h8e$[email protected]..
Darville wrote:
James Eitzmann wrote:
I am trying to evaluate jdo implementations. I have installed the
eclipse
plugin according to the instructions, but it is not working. I amrunning
with eclipse 2.1 on windows. I can see the menu items and the entry inthe
preferences panel but when I click on the preferences item, nothing
happens. When I try to switch to the kodo view, I get a problemsshowing
view error message. I am using kodo 2.5.2.
Does anyone have any suggestions?
Thanks
Hello,
I am experiencing the same problem
using kodo 2.5.2
using eclispe 2.1.1 (windows)
ChristopheOops, the solution was already in the forum
See mail from Aapo (07-17-03)
This is a copy of the mail :
<<
Hi,
while trying to get KODO Eclipse plugin to work,
I noticed that in plugin.xml there was incorrect reference
to the jakarta-loggings jar : the version number is wrong:
1.0.2 -> 1.0.3.
Changing this I could get it working.
Aapo
>

New plugin not work on apache2.0.39

Similar Messages

Maybe you are looking for