New Port Not Detected

Just got a new iMac 20'' 2.16GHz Core 2 Duo and having problem setting up the Speed Touch 330 USB ADSL modem. I've installed the new driver for 10.4, but the modem is not recognised.
In the Network Setup Assistant, there is no USB modem example.
It still works on the iMac 700Mhz Combo so what can I do on the new machine?
iMac 20'' 2.16GHz Core 2 Duo Mac OS X (10.4.7)

I went to the manufacturers website and downloaded the software for the Speed Touch 330 USB ADSL designated for OS X Tiger, however, during an attempt at installation I get a message from the installer that this software can't be installed on my Mac. I don't think that this is a Universal binary, it appears to be PPC and so probably won't work on an Intel Mac even if it could be installed.

Similar Messages

WRT 110 - New Router not detected

I am having problems with the setup wizard. Im getting "New router not detected". It's all setup correctly. I've reset modem, router and rebooted 100 times atleast. I can get on the internet when the modem is conected through the router. Also, I cant get to the 192.168.1.1 router setup. I have set up other linksys routers without problems. We are on Time Warner cable internet. Please help before I smash this thing.

I have an older Linksys (twin antenas) product so bought this for my son in Ohio. He tried to connect the router using his laptop and could not do it...after calling support (Punjab in India) they could not resolve the problem or begin to figure it out. After watching a 6 year old on YouTube hook up a router, I figured it couldn't be that hard so I told him to send the WRT 110 to me along with his laptop.
After trying the install myself (using the supplied CD), I could not connect to the internet via the wired laptop-router-modem either. So I figured the wireless device of the laptop may be interfering with the router. So I went to Control Panel>>Network Connections>> and right clicked on "Wireless Connection" and clicked "DISABLE". After that, the laptop DID connect to the internet via the ethernet cable.
When I tried to login to the new wireless network using another laptop, I could not connect after repeated attempts using the letter "O" and the number "0" of the WEP code generated by the CD install. I finally COPIED and PASTED the WEP code to a Word document, saved to a stick, then transfered the doc to the wireless laptop. After COPY and PASTE of the WEP code to the LOGIN >>>SUCCESS.
The wireless connection works fine two floors away from the router as does my old antenna router did, so the "range" problem reported by others is a mystery to me. Don't know why the "support" couldn't have solved this problem....I'm not a real computer nerd, but can do "trial and error" fixes.
Bottom line: router works fine and is better looking than the "antenna" ones but who cares??? I go for the blinking lights anyway <g>

Hp Pavilion DV4-1235ee No sound & Usb port not detecting.

In my laptop Hp Pavilion dv4-1235ee there is no sound coming from the internal speakers. If I connect external speaker its works fine. Usb port is not detecting now. any help will be appreciated.

What is the current Operating system on your notebook? I suspect we have issue with internal speaker on hand...but would like to reinstall the Audio Driver and check...
Again for the USB, we can try and install Chipset driver and check...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Satellite A300d - New battery not detected

I recently got a new battery PA3533U-1B RS/AS for my aged Satellite A 300d.
When I place the new battery in the laptop, unplugged, press power button, the red battery indicator flashes several times, no power.
When i plug in the mains to the laptop, the red battery indicator stays red as-though charging, once windows has loaded the battery shows as Not Detected.
I have checked connection and gone through device manager- unistall/install but come to no luck. This is the 3rd replacement battery I've had from this company who have a very positive review. Is it my laptop or the battery?
I do have a good faithful 20 minutes battery that recognises every time and charges without a problem.
If you could please help it would actually stop me from going crazy, thanks in advance :)

Hi Paolo,
Thanks for your reply. I have kept the battery on charge for 12 hours +, both the 2nd and 3rd battery I have received, and neither of them show as detected.
When the laptop is off, new battery in, ac in, red light stays on for about an hour then it continuously flashes. This happens with both. After charging it won't turn on until insert ac, then when windows loads, bat not detected.
When I put my original battery in in turns on without ac, and battery shows and info correct.
I will speak to the dealer again, I returned the 1st battery, once i reported 2nd one faulty, he sent me a 3rd. The dealer has really positive feedback and good comment, it's just baffling?!
Thanks again for your help.
Daniel

Parallel port not detected in measurement and automation explorer

I have installed labview 2010 in windows XP.
The problem what I am facing is I could not find "Serial & Parallel port" option in Measurement and automation explorer.
After seeing the similar problem in forum I have installed Ni-Daqmx 9.0.2. But still I can not see the ports in MAX.
I think i have attached enough document .
If the parallel port is not detected in MAX can we send digital data to parallel port.
I have tested parallel port with LED connecting one leg in 1st data line(pin 2) and another in gnd(pin 25).
And my program is to blink the led for every one second but I cannot see the blinking.
Can anyone help in this regards
thank you
Attachments:
max.jpg ‏90 KB
port setting tab1.jpg ‏30 KB
device manager resource tab.jpg ‏34 KB

Thank you for ur reply Smercurio
I have changed the bios setting now
but still i cant see the printer port in MAX
Regarding my vi, now i changed it please see that also
I have given values to element of arrays as (1,2&4)
Now also it is not blinking instead it is glowing all the time without blinking.
What i have to do next.
Attachments:
device manger.JPG ‏43 KB
device manger2.JPG ‏165 KB
port test.vi ‏9 KB

USB Port not detecting device

My usb port on the side of the pc both are not detecting any device. How to fix it?

A good place to start troubleshooting is this HP document, Troubleshooting USB Connections (Windows 7).
If you don't have Windows 7 or if you have further problems, please to provide more information when you post again. The more information you provide, the more likely it is that you'll find someone here to help you.
Welcome to the forum,
GeorgeFN
GeorgeFN
I work on behalf of HP.

New install not detecting sound card

My system is not detecting my sound card after a fresh install although alsa was working OK during installation.
I had the same happen with a Sidux install and this was fixed by a download and re-install of phonon but something else is wrong here.
Here is the lspci. Not sure what else I should post to help.
My other Arch install (kernel 2.26.28) is ok. The problem seems to be with 2.26.29.
@04:31 AM $ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:05.0 VGA compatible controller: nVidia Corporation C51G [GeForce 6100] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

Yes I had done that.
This from alsaconf...
No supported PnP or PCI card found
Would you like to probe legacy ISA sound cards/chips?
I have also re-installed alsa-lib, alsa-utils, phonon and everything connected with xine that I could find.
Should I be getting into the kernel? If so I'll need a little help.

New shuffle not detected by Windows

Familiar story: I bought a new shuffle, which arrived today, and Windows doesn't detect it at all. I followed the installation procedure by the book, but no luck. I went through every step in http://docs.info.apple.com/article.html?artnum=61711 including the 5 R's (more than once), but nothing works. I've uninstalled both iTunes and the iPod software, restarted my computer, reinstalled the latest versions of iTunes and the iPod software, and restarted again. No luck. I've tried every USB port on my computer. (I have one built-in USB 1.1 port and a PCMCIA card with four USB 2.0 ports.) The iPod itself claims to be charged when I press the battery button. (They must ship these models with a full charge, I guess.) It just isn't detected by Windows at all. It doesn't show up in device manager or Explorer or the iPod Updater or anywhere else. Any suggestions would be appreciated.
Dell C600 Latitude Windows 2000

I've already tried every USB port on my computer. (I have a single USB 1.1 port built in to the computer, and a PC card that provides four USB 2.0 ports. None of them work. All five show up as having 500 mA available to them, which I think counts as "high-powered," right?)
What do you mean when you say that I can't send it back? The return policy on the invoice says: "If you are not satisfied with your Apple purchase of a pre-built product, please call 1-800-676-2775 for a Return Material Authorization (RMA) request within 14 calendar days of the receipt of the product.…A 10% open box fee will be assessed on any opened hardware or accessory." So I thought I could return it provided that I am willing to get hit with a rather lame 10% restocking fee (which should come to about ten bucks on a shuffle purchase). Am I misunderstanding?

X220 display port not detecting Dell u2412M monitor

My new Dell U2412 1920x1200 is not recognized by te Lenovo X220 DisplayPort connector. I read that this may be a common problem. Is it so?
It shows a single monitor when monitor connected through dislay port (og with vga output)

yes it is. Try to use a displayport to dvi converter to connect to the LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

WLC2106 AP Connected to PoE port not detected

I have a WLC 2106. It is currently working as expected over AP's that are connected via a remote PoE switch. I wish to attach an AP to one of the local PoE ports.
On a different site we have an identical WLAN controller that was setup before my time, but it is working with an AP attached to a PoE port on the controller.
I can't get this to work on the new controller.
I have read this : https://supportforums.cisco.com/document/53421/connecting-aps-directly-2106
and this : https://supportforums.cisco.com/document/44841/cisco-2100-series-wireless-lan-controllers-best-practices
and I understand that the configuration I want isn't considered best practice but it is still one I would like to use, I know that it should work as I have a currently functioning example.
From the first document I have linked I have a configuration that matched 'option 2'. I have everything assigned to port 1, AP-MANAGEMENT is untagged and has a DHCP server configured to the DHCP server for the network, and the DHCP server is on the same network as the AP-MANAGEMENT interface.
CDP ALL shows the three AP's that are on the network but not the one that is directly connected.
(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
ap-manager 1 untagged 10.20.0.13 Static Yes No
guestwifi 1 9 192.168.0.3 Dynamic No No
management 1 100 10.20.0.12 Static No No
virtual N/A N/A 1.1.4.1 Static No No
The only difference I can see between the two controllers is the software version, with the new one being 7.0.2 and the older one being 7.0.1
Any thoughts?

Hi.
First you need to make sure the port is enabled with power.
WLC> Config port power all enable
Then make sure the AP have an IP address, otherwise it will not make a join request.
On the AP config this:
capwap ap ip address [IP address] [mask]
capwap ap ip default-gateway [address for the gateway]
capwap ap controller ip address [management interface address on the WLC]
The AP will the join the WLC.

PSE9 - Watch Folders in multiple catalogs - new files not detected

I run PSE9 and have 2 catalogs (both in a "Custom Location"), one with photos and one with pdf documents.
I have set up "Watch Folders" in each catalog, but I never get any notification about new files.
Service "AdobeActiveFileMonitor9.0" is running - with Local System Account.
Are there any logs to check?
Does watch folders rely on the archive attribute of files?
Does it matter which catalog I have open?

Hi,
Thanks for the feedback.
function(){return A.apply(null,[this].concat($A(arguments)))}
PSE9 Organizer: on wakeup after system sleep it does not recognize external disks
I tried this on my Win 7 machine with a USB device but it worked fine for me... Which OS are you on ?
Also, can you verify if the issue with the watched folder service is persistent if you don't restart the file monitor service each day? Or is it resolved after restarting the service once ?

New SIM not detected

Hi my PlayBook earlier I inserted carrier name Idea that detected. But now I changed the SIM, OTHER Carrier and device displays phone has blocked and giving error MM#6. Please help me to resolve this issue.

@Techvedic please, no need to respond in threads of which you have no idea what's happening.
@ajayalmost4u , is this a Playbook with Sprint branding on it? Where did you purchase this Playbook?
As a warning, if it is a Sprint PlayBook, it is locked to Sprint and not able to be unlocked for use in India, as Sprint uses a different CDMA network technology.
Your Playbook will work on WiFi, but not on a SIM cellular connection UNLESS you find a SIM with matching Sprint CDMA radio bands.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP Pavilion P7-1154, 2nd DVI port not detected

I have a P7-1154 with 2 DVI-D ports. I had a Dell desktop monitor attached via DVI on one port and my HDTV attached on the second port via HDMI adapter. I had video output to BOTH ports, but output to the 2nd port stopped working. There is no problem with the cable or the HDMI adapter because when I reverse the connections, I get the video output to the TV but nothing to the monitor. I tried the BIOS update, but the update installation trashed the BIOS twice and had to replace my motherboard TWICE. I upgraded from Windows 7 Home Premium to Windows 8 Pro, but no success. The only other solutions I saw have to do with other users attaching a VGA moniotor to their computer. Any advice would be greatly appreciated.

Hi,
Try reinstalling the video driver from the HP support site.
Dual monitors using Windows 8
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

IPod Touch not detected by "My computer" and Spotify

Hello!
My iPod Touch 4th generation, wich is completely new, is not detected in "My Computer" or Spotify, only in iTunes. I have tried with updates and reboots, but nothing seems to work.
When troubleshooting in iTunes, it finds nothing wrong.
The iPod works perfectly fine with iTunes.
I have Windows XP and USB 2.0.
All help is appreciated! Thank you

I have tried with an other PC:
Before I installed iTunes on PC two, the iPod was recognized as a camera in "My computer".
After installing iTunes on PC two, it worked completely fine with iTunes, but again failed to be recognized in "My computer".

HBA Card is not detecting in m4000 server

Hi,
hba is not detecting in M 4000 server. Any one plz help me.
Thanks & Regards,
Venkata Siva

Hi.
You not write what type/vendor new HBA.
You not write what you do for detect new HBA and what means new HBA not detected.
I hope you create */reconfigure* before install new HBA or make boot -r
Regards.

New Port Not Detected

Similar Messages

Maybe you are looking for