New Portal implimentation - KM+C required?

hello,
We are going to start a new Portal implimentation in the near future.
My question is: Do we need to use KM+C and TREX?
The business strategy for the Portal has not been defined yet. One of the Portal's purposes would be to replace our current intranet.
We also want some integration with BW 3.1 and do SSO to the R/3 modules, BW and HR and CRM eventually.
We do not required the real time colaboration functions.
The servers were bought more than a year ago and are sized correctly for a standard installation of the DB,WAS and Portal Platform.
Our main concern I guess is the installation of TREX, for which we did not size for initially.
Any advice will be much appreciated.
Thanks

Ganesh,
Thanks for the reply, but unfortunately it does not quite answer the question. I have done an installation of all the components before and I know what is mandotary and what not. I understand that if I want to install KM+C then TREX is mandotary. Actaully it is TREX which I do not want as we do not have the hardware capacity for it.
If I may ask the question again:
Do we need to use KM+C(and the mandotary TREX) to achieve the requirements below?
One of the Portal's purposes would be to replace our current intranet.
We also want some integration with BW 3.1 and do SSO to the R/3 modules, BW and HR and CRM eventually.
We do not required the real time colaboration functions.

Similar Messages

  • Effort Estimation for a New BI implimentation Project

    Dear Experts,
    I need Effort Estimation model excel sheet or any other doc for a New BI implimentation Project.
    I want to know how much time it will take for the following 2 scenarios.
    1. Activatating the business content Object in BI7 for all BC extracotrs in ECC.
    2. If content is not suitable for the requirment then what is the time frame for creating the Customized BI objects and DS,ES and all in ECC.
    I knew it the sam has been circulated to their personal e-mail ids earlier from this forum.
    <removed>
    Thanks,
    APC
    Edited by: Arun Varadarajan on Mar 24, 2009 5:20 PM

    look into this link
    http://www.slideshare.net/arun_bala1/asap-methodology

  • WebLogic Portal (10.3.0) requires feature "com.m7.nitrox (1.0.20)" (?)

    (I'm re-posting as WebLogic Portal (10.3.0) requires feature "com.m7.nitrox (1.0.20)" (?))
    Greetings. I just installed WebLogic Portal 10.3 and I'm trying to install a couple of plug ins to Workshop/Eclipse, but whenever I select any item to install I get this error:
    WebLogic Portal (10.3.0) requires feature "com.m7.nitrox (1.0.20)", or compatible.
    Everything else seems to be working fine, so I'm not sure why my installation is giving me this issue. I've done a bit of digging already and haven't found what may be causing this issue, and I'm hoping someone here may be able to point me in the right direction.
    Thanks!

    This is a known issue with WLP 10.3; it has been addressed for the next release of WLP. You could contact support to try to get a patch created (reference CR379999).
    I can think of 2 possible workarounds:
    1. Download the new plugin manually, and either a) create an extension location on the file system from it and add that via Help|Software Updates|Manage Configuration, or b) extract it to one of the workshop eclipse folders (i.e. tools/eclipse_pkgs/2.0/eclipse_3.3.2, tools/eclipse_pkgs/2.0/pkgs/eclipse, workshop_10.3/workshop4WP/eclipse, wlportal_10.3/eclipse) and restart Workshop.
    2. Edit <beadir>/wlportal_10.3/eclipse/features/com.bea.wlp_10.3.0/feature.xml, comment out the <import feature="com.bea.*"/> lines in the <requires> block, restart Workshop, and try again.
    Greg

  • Opening View in new Portal Window

    Hi
    I have a requirement to open a new portal window on clicking a link in the portal.
    I have done the required setting in 'SPRO' and given the Page ID to the link . But i am not able to make out how to make that page open in new window on clicking the link. I have tried changing the property of view to 'Launch in separate window but it didnt work.
    Regards,
    Puneet

    Hi Puneet,
    I also have the same issue - did you find a solution?
    Thanks,
    Oloy.

  • New Portal add-in for JDeveloper

    Hi,
    I just installed the new Portal add-in for JDeveloper 9.0.3 which additionnally to the existing JPDK portlets supports now the new standard JSR168 portlets generation.
    When trying to generate standard portlets, the wizard starts OK and all the screen are there, but when clicking on the finish button to generate the code, nothing seems to happen and no error message or anything is displayed !!
    Any suggestion ??
    My operating system is W2K workstation using JDeveloper 9.0.3.2.
    Thanks,
    P.S. I have followed the installation instruction (copying the required files into the jdev/lib/ext directory and the jdev/lib/patches directory).

    George,
    It sounds like you haven't followed the download and install instructions for the portlet container (called 'PDK Standards Preview' on portal studio).
    Although the jdev addin can build portlets suitable for **any** jsr 168 compliant container, part of the install depends on jar files in the JWSDP 1.2 distribution which you download as part of the container install.
    Check the jdev addin install doc again, specifically pre-requisite number 2.
    If you don't want to use the Oracle JSR 168 container, then just download JWSDP 1.2 from java.sun.com and grab the same jar files from that. Although, note that in this case the deployment instructions in the tutorial article will not apply - as they are oc4j/jdev specific. You'll have to figure out how to deploy into your chosen container yourself.
    Regards,
    Gareth
    (PDK team)

  • New Portal Overriding Base Page

    Hi I have a requirement to override the Customer Contact page with a new custom portal that way when a user tries to open a customer contact, it would direct it to the new page.
    What I have done so far is to create a new portal (no zones attaced to it) and then on the navigation key, I chose Override (System) and input customerContactMaintMain as the overriden Navigation Key. However, when I try to go to any customer contact, I get a 'Service Metainfo Missing' error for the new portal created. Any idea what is causing this?
    Will this requirement be met by using config tools or will I have to use Cobol/JAVA UI?
    Thanks in advance.
    I am using V.2.1.0

    1. when you create your custom portal - system creates navigation option. You can see it if you go Admin menu / P / Potal.
    2. so that navigaton option you need to add to context menu for the Person, or replace existing navopt for it on "Go to Customer Contact".
    But your custom navigation option, that directs to your portal, need to have a Context Field = PER_ID.
    After that person id will be transfered when you go to your portal from conterxt menu of that person.
    Zones of your portal need to have a hidden filter = PER_ID, where datasource for it will be a portal.
    Hidden filter must be linked in your zone sql script... and so on.
    As a result when you chose portal from Person context menu, system will transfer you to portal and exicutes SQL-script in zone in one click.

  • How to open NEW PORTAL PAGE from current portal page ?

    I'm very confuse with my problem.
    I have 2 portal page.
    portal page I has 2 portlet : portlet A & portlet C.
    portal page II has 2 portlet : portlet B & portlet C.
    Now my customer want : start with portal page I, when i submit portlet A, program will open portal page II.
    I don't know the way to call new portal page from current portal page. Help me, please.
    Thanks.
    Edited by: young_hero on Oct 30, 2008 1:12 AM

    Could you please help me how to call a .html page
    from a Pl/Sql procedure or trigger ?
    Thanks & Regards
    Kalyani KothaKalyani,
    Could you explain a little more exactly what you're trying to acheive? I'm not quite sure what it is you're asking for. Are you asking: "how would you/can you open a browser and direct it to a URL with PL/SQL?"
    Earl

  • How can I add a new entry for determining a requirement type

    Dear Friends,
    How can I add a new entry for determining a requirement type
    via Item Category + MRP type,  I see no new entries selection.
    This is in  Avb Check & TOR-> TOR-> Determination of req type using transaction.
    Please help.
    Regards
    Ravi.

    Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
    Just one node above?
    Never mind, you need to add entry on item category:S

  • TS1559 The wi-fi in my iphone 4S is 'greyed out' and i am not able to switch it on. I have tried resetting the network settings but nothing happened. I can't even download the new iOS7 version as it requires WI-FI to do so. Please help.

    The wi-fi in my iphone 4S is 'greyed out' and i am not able to switch it on. I have tried resetting the network settings but nothing happened. I can't even download the new iOS7 version as it requires WI-FI to do so. Please help.

    I had same problem. I removed the back cover, and warmed wi-fi module by hairdryer of my wife). five days wi-fi works great. I do not know what will happen next.
    during operation iphone must be turned off. time of heating is near five minutes. wifi module is located upper the battery, on the upper right corner of device.

  • Creating a new portal in a new domain - no baseportal template

    Using Weblogic Platform 7.0 on Solaris 8, I'm trying to work through the
    procedure at http://edocs.bea.com/wlp/docs70/dev/newdom.htm "Creating a
    new portal in a new domain."
    Step 1 "Creating the new domain" goes fine. I can start the portal
    server using WL/user_projects/domainname/startPortal.sh and connect to
    its console at http://server:7501/console.
    In Step 2 "Create the new portal", I start up ebcc.sh, open the project,
    and run the Portal Wizard. I get as far as "Portal Templates". The
    portal templates comes up empty; there is no baseportal icon, and I
    can't go any further.
    What's wrong?!?!
    Larry Mulcahy [email protected] [email protected]
    http://www.nyx.net/~lmulcahy/ http://www.frii.net/~lmulcahy/
    PGP key at http://wwwkeys.pgp.net:11371/pks/lookup?op=get&search=0xE6F89645
    "I like Linux, but I don't have any part of my body pierced." Roland Latour

    Michael -
    See this document. It should help you out.
    http://edocs.bea.com/platform/docs81/confgwiz/startcw.html#1049231
    Regards,
    Kunal
    "Michael Meyer" <[email protected]> wrote:
    hi,
    I am running BEA Weblogic Portal 8.1 on a linux machine without any grafical
    user interface. On Windows I was using the 'Configuration Wizard' to
    create
    a new domain. Can someone please tell me, how I can create a new domain
    without an grafical user interface? Are there any command line tools?
    Michael

  • Error deploying new portal logon page

    Hi Gurus,
    I'm getting an error deploying my new portal logon page. I've made teh necessary changes to the portal.logon.par.bak file. I've rename it and made the necessary changes in config tool. i've created a new autoscheme_test.xml file and have assigned it accordingly. After restarting the portal, i'm getting the error message below trying to launch the portal :-
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    The exception was logged. Inform your system administrator..
    See the details for the exception ID in the log file
    Any ideas? Are there any other setting that i need to do aside from teh autosceme file. thanks

    Hi Johan,
    There are two lib files which you need to paste while you import the file in the NWDS.Just check for the steps through this weblog
    the jar files name are
    com.sap.portal.runtime.logon_api.par
    umelogonbase.jar
    (when you unzip you can find the files at PORTAL-INFlib)
    Modifying The Logon Par(or customising the Logon Screen)
    Thanks
    Pankaj

  • Creation of new Portal Apps!!portal.wf not found !!!

    Hi ,
    In EBCC I am creating a new portal web application in the existing Portal
    Application. I am assigning default portal webflow to my new Portal.
    After synchronization , if I access the portal by its context root it
    says, portal.wf not found..
    What is the significance of portal-project directory ?
    regards
    vedant.

    We found the problem,
    We had to add a numeric and /or a special charachter in the password

  • Create new portal-user with webservice

    Hi,
    I'm trying to develop a ejb-webservice which is creating a new Portal-User.
    The webservice is working so far, I made methods like getDisplayName() which is returning the display name to a logonId and so on. All this is working. I'm using the component sap.security.api.sda for this.
    Problem: User-creation is not working. I think the problem might be, that a webservice is not authorized to create users? Or putting it in another way: Is it possible that a webservice is "logging in" at the portal, or sohehow authorizing itself?
    Thanks and regards
    Jan Hempel

    Hi Detlev,
    thanks for Your answer.
    It seems like that the problem was caused by using array-parameters in the webservice-method?!
    Strange, but after removing the array-parameter from the method it worked! Before the webservice never returned anything, not an error or anything else.
    Well, strange enough, but I can live with that.
    regards
    Jan

  • New Portal User options are disabled when trying to create a new User

    Hi All,
    I am trying to create a new portal user profile using the administrator login. While doing that, I am getting all the options ( used to create the new user ) as disabled. Can anybody let me know the reason & solution of such a problem.
    or
    Anyone can provide me the document on how to create the new profile on portal. Thanks.
    Best Regards,
    Chander Kararia
    Edited by: Chander Kararia on Jan 15, 2009 7:26 AM

    Hi Chander,
    I just want to know if you are able to modify the attributes of an existing user. If not then you have been assigned the User Admin role (read only). Please check that. If yes then revert.
    Regards.
    Rajat

  • Problem about New Portal Desktop?

    hello
      I have read the PDF document about How to Create a New Portal Desktop.
    And I have done following the document.
      Now I have a problem,when the test user open the Portal Desktop,the Top-Level Navigation iview is in the top,and it cover half of  the Masterhead iview.
      I check a  long time ,but I can't find what's the reason.
      Anyone can help me  ?
      Thanks
      lexian

    Hi lexian,
    May be while creating the theme you would have set a larger height pixel for this.
    Check this link
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4161
    Regards
    Arun

Maybe you are looking for