New portal v7 install

We had a vendor install PS7 and for some reason, the portal files are installed under the "admin" instance within appserver. When I questioned the vendor, they said this is the default install for PS7.
This makes no sense to me, if I need to bounce the portal instance, I cannto do it from the web interface because it shuts down the admin instance, I then have to go to the console and restart the admin instance by hand.
Shouldn't the portal web applications be under a seperate instance than the admin instance?

Just to add to the advice already given:
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
Note that Adobe requires you to uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Similar Messages

  • How to add a new Portal instance in 10.1.2

    In previous versions of AS,were able to create new portal instances by running the portal configuration assistant like this:
    ptlasst -mode PORTAL -s <portal_schema_to_create> -c <db_conn> -p <password> -demo –report
    it was possible to have several independent portal schemas in one database, and it doesn't matter if it was the infrastructure database or a custom database. In this new release of AS (10.1.2.0.2) i didn't see anything in the documentation that refers this, i know that ptlasst was replaced by ptlconfig, but ptlconfig does not have any option like that one, or at least not that simple (with a little effort i was able to see what were the commands that repca executes to create a new portal, and changing them and executing them agaim i was able to create new portal schemas, but i dont believe that this is the rigth way to do it, its too hard).
    Does anyone now if its possible to add new portal instances in the same database in AS10.1.2.0.2?
    Thanks in advance,
    Tony Cruz

    You may want to refer to the Oracle Application Server Installation Guide for more information. Chapter 6, "Installing OracleAS Infrastructure" provides information about creating a new Metadata Repository in an existing database and in a new database.
    To access the installation guide, go to the Oracle Application Server Documentation page on OTN:
    http://www.oracle.com/technology/documentation/appserver.html
    Under the 'Release Notes, Installation, and Upgrade Documentation' section, click 'View Library' for the platform on which you are performing the installation.
    Message was edited by:
    lrajesh

  • Can't Start Portal After Install

    After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the same message.
    What password should I use to start the server?

    I've followed the directions and am experiencing the exact same problem. Brand
    new installation of Weblogic server 6.1 SP2 with examples. That install is working.
    Then added Portal 4.0 SP1, updated the license file and I have the same issue
    with the Illegal access exception resulting in the "Fatal initialization exception"....
    Hmm!
    [email protected] (Bowrat) wrote:
    Below listed are the common errors you run into during installation
    process:
    - You need to have the correct version numbers of both the weblogic
    server and the portal server. For instance the portal server 4.0 (eval
    copy) will only run on WebLogic 6.1 SP1. So check the edocs for
    supported platforms
    - Make sure you have the installed the full version of the weblogic
    server (including examples)
    - Finally, you need to run the UpdateLicense.cmd file to update the
    license.bea under ur Bea Root
    Give it a shot after u have checked all of the above three - goodluck
    - Bowrat
    www.Bowstreet.com
    Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
    From: Steve Anderson <[email protected]>
    Newsgroups: weblogic.support.install
    Subject: Can't Start Portal After Install
    References:
    NNTP-Posting-Host: 209.11.114.150
    X-Original-NNTP-Posting-Host: 209.11.114.150
    Message-ID: <[email protected]>
    Date: 13 Feb 2002 20:25:53 -0800
    X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
    Organization: BEA SYSTEMS Inc
    Lines: 18
    XPident: firewall-user
    Path: newsgroups.bea.com!209.11.114.150
    Xref: newsgroups.bea.com weblogic.support.install:9600
    After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
    that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the samemessage.
    What password should I use to start the server?

  • New Portal add-in for JDeveloper

    Hi,
    I just installed the new Portal add-in for JDeveloper 9.0.3 which additionnally to the existing JPDK portlets supports now the new standard JSR168 portlets generation.
    When trying to generate standard portlets, the wizard starts OK and all the screen are there, but when clicking on the finish button to generate the code, nothing seems to happen and no error message or anything is displayed !!
    Any suggestion ??
    My operating system is W2K workstation using JDeveloper 9.0.3.2.
    Thanks,
    P.S. I have followed the installation instruction (copying the required files into the jdev/lib/ext directory and the jdev/lib/patches directory).

    George,
    It sounds like you haven't followed the download and install instructions for the portlet container (called 'PDK Standards Preview' on portal studio).
    Although the jdev addin can build portlets suitable for **any** jsr 168 compliant container, part of the install depends on jar files in the JWSDP 1.2 distribution which you download as part of the container install.
    Check the jdev addin install doc again, specifically pre-requisite number 2.
    If you don't want to use the Oracle JSR 168 container, then just download JWSDP 1.2 from java.sun.com and grab the same jar files from that. Although, note that in this case the deployment instructions in the tutorial article will not apply - as they are oc4j/jdev specific. You'll have to figure out how to deploy into your chosen container yourself.
    Regards,
    Gareth
    (PDK team)

  • Where I can creat a new portal application?

    hello:
       I want to <u>Create a new Masthead Component</u>:
      a) Go to System Administration – Support – Support Desk – Portal Runtime – Browse deployment. Navigate to ROOT/WEB-INF/deployment/pcd and select file com.sap.portal.navigation.masthead.par.bak. Click the download link. Open the zip file and extract it to your local file system.
      b) Open Eclipse and <u><b>create a new portal application project</b></u> based on the par file (File – Import – PAR file).
    my problem is I don't know where I can creat a new portal application?Do I need download a software?
      anyone can help me ?And give me the tool!
      thanks in advance!

    Hi,
       For NW2004s you can download from <a href="https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">here</a>.
    The steps for installation are:
    1.Begin installation by executing JDTSetup.exe
    2.Enter installation directory where u wish to install.
    3.You will have to enter your Java SDK directory. NDS needs at least 1.4.2 version or later.
    4.Enter folder name for workspace storage: C:\NWDS\Workspace or C:\SAP\JDT\Workspace
    5.After installation is finished start Developer Studio by going to SAP Netweaver Deveoper Studio icon on your desktop.
    6.Open EP Perspective by going to Window->Open Perspective->Other->Enterprise Portal
    Hope this helps.
    Regards,
    Pooja.
    Message was edited by:
            Pooja S

  • New Portal implimentation - KM+C required?

    hello,
    We are going to start a new Portal implimentation in the near future.
    My question is: Do we need to use KM+C and TREX?
    The business strategy for the Portal has not been defined yet. One of the Portal's purposes would be to replace our current intranet.
    We also want some integration with BW 3.1 and do SSO to the R/3 modules, BW and HR and CRM eventually.
    We do not required the real time colaboration functions.
    The servers were bought more than a year ago and are sized correctly for a standard installation of the DB,WAS and Portal Platform.
    Our main concern I guess is the installation of TREX, for which we did not size for initially.
    Any advice will be much appreciated.
    Thanks

    Ganesh,
    Thanks for the reply, but unfortunately it does not quite answer the question. I have done an installation of all the components before and I know what is mandotary and what not. I understand that if I want to install KM+C then TREX is mandotary. Actaully it is TREX which I do not want as we do not have the hardware capacity for it.
    If I may ask the question again:
    Do we need to use KM+C(and the mandotary TREX) to achieve the requirements below?
    One of the Portal's purposes would be to replace our current intranet.
    We also want some integration with BW 3.1 and do SSO to the R/3 modules, BW and HR and CRM eventually.
    We do not required the real time colaboration functions.

  • Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.  ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

  • How to restore music on computer after new hard drive installed?

    had new hard drive installed and am not able to retrieve/find music that was backed up on my computer before new hard drive was installed.  Only music that was in the "cloud" was able to be retrieved. Any idea where it could be?
    Thanks!

    Did you reinstalled iTunes ? It looks like you had a newer version of iTunes with the corresponding database, and now your iTunes seem to be an older version. If you are a little patient, you might easily fix this with iTunes 10.5 which should come out very very soon since iOS 5 has been annonced for tomorrow.

  • I had a new hard drive installed on my IMac.  Now I am trying to find my photos on time machine to restore on Iphoto.  How do you do this?

    I had a new hard drive installed on my IMac.  Now I am trying to reload everything back on.  I do have time machine.  How do I find all my pictures on TIme Machine to load back on IPhoto.  I hope I haven't lost all my family photos. Help!  Thanks a bunch!

    Hi, I never use TM, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.

    On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?

    Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
    tt2

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • How to open NEW PORTAL PAGE from current portal page ?

    I'm very confuse with my problem.
    I have 2 portal page.
    portal page I has 2 portlet : portlet A & portlet C.
    portal page II has 2 portlet : portlet B & portlet C.
    Now my customer want : start with portal page I, when i submit portlet A, program will open portal page II.
    I don't know the way to call new portal page from current portal page. Help me, please.
    Thanks.
    Edited by: young_hero on Oct 30, 2008 1:12 AM

    Could you please help me how to call a .html page
    from a Pl/Sql procedure or trigger ?
    Thanks & Regards
    Kalyani KothaKalyani,
    Could you explain a little more exactly what you're trying to acheive? I'm not quite sure what it is you're asking for. Are you asking: "how would you/can you open a browser and direct it to a URL with PL/SQL?"
    Earl

  • New Mac, fresh install of Mountain Lion When I click to open a .Pdf from a web page,while in Safar, I get a black window Nothing opens in Preview or in Acrobat No option to download

    New Mac, fresh install of Mountain Lion
    When I click to open a .Pdf from a web page,while in Safar, I get a black window
    Nothing opens in Preview or in Acrobat
    No option to download

    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type of copy paste the following:
    /Library/Internet Plug-Ins
    Click Go. If you see this file:  AdobePDFViewer.plugin
    Drag it to the Trash, empty the Trash.
    Quit and relaunch Safari.

  • My pc crashed...and i purchased a new one and installed itunes...how can i sync my ipod touch 2 my pc? when i connect it 2 itunes on my new pc..by defualt it will rerase everthing on my ipod

    my pc crashed...and i purchased a new one and installed itunes...how can i sync my ipod touch 2 my pc? when i connect it 2 itunes on my new pc..by defualt it will rerase everthing on my ipod

    The other responder gave you a program that will transfer stuff from your iPod to your new computer.  You can transfer iTunes purchaces to your new computer by:
    http://support.apple.com/kb/HT1848
    After you move your stuff to your new computer you will have to let iTunes erase your iPod and then sync with the stuff that is now in your iTunes library.  You will loose app data though.

  • My old iMac broke so i got a new hard drive installed. How can i retrieve my old purchased items?

    hiya
    got a new hard drive installed and couldn't retreive anything off my old hard drive
    can i get my old purchased items from itunes
    thanks

    Hi hopscotch,
    Log into the iTunes store and do a search to find your previously purchased items. Click the "Buy" button, and put in the same iTunes id and password that you originally used to purchase. A dialogue box will come up indicating that you have already purchased this item and do you want to download it again for free....
    Say yes, and it will be re-downloaded to your Mac.
    Hope this helps!
    Cheers,
    GB

Maybe you are looking for