New power adapter dead after one charge cycle

hi guys.....
my power supply went a week or so ago... started to turn on and off then stopped completely...
i bought a new apple A1021 as an exact replacement to the previous...
plugged it in and got amber led then charged through to green and all functionality was as normal... problem sorted.... or so i thought....
came to it the next morning to find no led on.... so i checked fuse and swapped lead etc but no response....
phoned apple store mac docs whose answer was 'ummm i don't really know try resetting the pmu' which i have done but still no luck....
so my questions to you are:
1. is the new power supply faulty?
2. is there a problem with something shorting / feeding back into the power supply.... frying it?
3. is there an internal fault preventing charge / power? (although it did charge once)
4. a friend said it could be a faulty battery?
i don't know if you have come across this before but any help or suggestions would be greatly appretiated.... thanks

You may need to download and install the SMC firmware update:
http://support.apple.com/kb/DL1312?viewlocale=en_US

Similar Messages

  • New power adapter and battery, still not working?!

    A couple days ago, my macbook stopped charging. The power adapter was plugged in, but there was no indication that it recognized it or was charging, so I figured it was a broken power adapter. I bought a new one, plugged it in, everything was fine - until the next day. The new power adapter stopped working as well. So, I go to the genius bar, and they tell me it's my battery. I buy a new battery and plug in the new charger. Everything's working again, until I unplug the power adapter to move my laptop into another room - and now it's not charging again! I tried every power outlet, and something is definitely wrong with the macbook itself. I'm pretty frustrated since I've now spent $200 on new stuff and the problem still isn't resolved.
    Does anyone have any ideas?

    A, I love Alexia Potatoes--I think I'm having some garlic mashed with dinner tonight.
    B, Have you downloaded and applied this firmware update?
    http://support.apple.com/kb/DL1311
    Before you do so, you may want to try just a plain old SMC reset:
    http://support.apple.com/kb/ht3964
    Good luck!

  • New Power Adapter Issue

    Okay, this is going to be kind of long, I apologize.
    So, I have a Macbook Pro that is a few years old (it's the last model to have the one button). Recently, by original power cord got frayed and stopped functioning, so I got a new one. I got the new L-shaped adapter and I started having issues. If I unplug it and plug it back in a few minutes later, it doesn't recognize that it's plugged in. But, if I shut down the computer and take out the battery and put it back in, it will start working until I unplug it again for an extended period of time. The cord works fine in my sisters computer, it's not a battery issue(got a new one after this problem), I reset the SMC, so the next thing on my list to check is the logic board. But then something occurred to me that I should have thought of earlier. What are the odds that my logic board will fail exactly the same time I bought a new power adapter? I think there is something different about the power adapter that is causing issues the SMC or something. Is this what's going on? Are there other reports of this happening? Is there going to be an SMC update to fix this?

    The new adapter with the angled plug doesn't work with older (pre-unibody) MBPs. If I were you, I would return or exchange it for one of the older ones with a straight plug. If you can't exchange it where you bought it, ask for a refund, and buy a new or refurbished adapter from one of these vendors:
    http://eshop.macsales.com/item/Apple/A1290AR/
    http://macbookadapter.com/85wcompare.html
    The first is a highly dependable Mac-centric vendor with whom many regular posters here have dealt often and happily, including myself. The second is a vendor I've never dealt with and can't vouch for. I mention them only because they advertise old-style MagSafe adapters both new and refurbished. Before ordering from either of these or any other vendor, telephone them and confirm that the older style is available and will be supplied to you if you order.
    Message was edited by: eww

  • New power adapter for old macbook - It doesn't work!

    Hello!
    My MacBook is 3 years old. My power adapter got broken at the end where you put it into the socket.
    Now I bought a new power adapter. The adapters have changed now. The end where you put it into the computer looks now a little bit different. But they told me in the Apple Store that it will also fit my 3 years old Macbook.
    At home it really fit my Macbook but it didn't charge. Nothing happened, no light. How can that be? Then I combined the two, the end for the socket of the new power adapter and the other part where you put it into the computer of my old power adapter. Now it charges. So is the problem after all the part where you put it into the computer of the new power adapter that looks different now?
    Or what can I try now?
    Thank you for help!
    Sorry for my bad English.
    xenchen
    Message was edited by: xenchen

    You may need to download and install the SMC firmware update:
    http://support.apple.com/kb/DL1312?viewlocale=en_US

  • Need new power adapter for Qosmio F50

    Hello
    I am in need of buying new power adapter for my Qosmio F50 126. The reason being if I try to run more demanding application on my computer, the entire computer just crashes, shuts down. I need to buy a new adapter before my entire computers crashes result in destroying my HDD. I am not sure if my battery are died or the power adapter fails to charge them up.
    The picture of underside of my power adapter is shown below.
    https://www.dropbox.com/s/qcrk4fl5bhftbzm/IMG_20131220_215821_454.jpg
    What I would like to know if the following two adapters are the same and would work with my model. I ask this because the price difference between the two units is significant., 20 USD. Also, I will be importing it from the USA using an agent here. Therefore I need to get it right on the first try.
    I'm curious about the connecter it has on the end. I wonder if its same as the one which came with the notebook. I believe it wont be an issue with it clearly says it supports my model, Qosmio F50 126
    Another find which I believe is the best and most compatiable.
    This one will sure work but the price is much higher than the one mentioned above
    Regards
    Abdusamed
    +Message was edited: link to onlineshops has been removed - advert+

    Hi
    You need an AC adaptor which supports *19V and 6.32A*
    The Ampere value might be a little bit different. This should not be a big problem but you have to ensure the Ampere value isnt too low. The notebook needs enough power to run properly and to charge the battery.
    However, the Volt value (19V) cannot be different. _It has to be *19V_*
    The original AC adaptor has the part number: *PA3290E-3AC3*
    I recommend you to purchase the AC adaptor recommended by Toshiba.

  • HT201300 can i buy Power Adapter Wall Plug Duckhead Charger for my macbook pro

    I see and hear a spark every time I plug my MacBook Pro power adapter into an outlet. Now my charger is working but my duckhead adapter is not working. Where can i get a new adapter.

    Apple Mac AC Power Adapter Wall Plug Duckhead Charger | eBay
    Amazon.com: Apple Mac AC Power Adapter US Wall Plug Duck ...

  • HT1476 Hi! So my original iPhone 5 charger broke and I bought a 10 ft generic iPhone 5 charger And didn't come with a power adapter, what ***** is it charges slow. Can I use a different adapter? and will it effect my battery?

    Hi! So my original iPhone 5 charger broke and I bought a 10 ft generic iPhone 5 charger And didn't come with a power adapter, what ***** is it charges slow. Can I use a different adapter? and will it effect my battery?

    Nice try! Take a hike.

  • Maximum battery life obtained on an iPhone for one charge cycle?

    Hi all,
    I wanted to know what is the maximum battery life anyone obtained on an iPhone for one charge cycle? What is the average? I managed to get 4 hours of access time (Phone and Internet) and 2 days standby and wanted to know what the average is.

    I tried to limit my phone usage to only calls and occasional mail check (I pop mails once an hour), and the best I could get till now for that has been 4 hours and 40 minutes. Took care to reduce the brightness to 70% and always lock the phone (by pressing the Sleep/Wake button), removed keyboard clicks and disabled wireless network availibility. Is 4 hours talk time + internet alkong with maybe 2 days standby a decent figure to expect for the iPhone performance?

  • MacBook "Not Charging" after new power adapter.

    Last week the power adapter that came with my 13in MacBook began to melt. I ordered a new adapter "60w MagSafe Power Adapter" plugged it in, and it lit up, but now my battery information on the screen says "Not Charging" and If I unplug the adapter, the computer completely shuts down. I had no problems with the battery or the adapter before the "meltdown" Gosh, My Mac was still charging even while in fire hazard mode Lol! Why is the new MagSafe adapter not charging my MacBook? Please Help!!!
    Here's what I am getting under the power information:
    Battery Information:
      Model Information:
      Manufacturer:          DP
      Device name:          ASMB016
      Pack Lot Code:          0002
      PCB Lot Code:          0000
      Firmware Version:          102a
      Hardware Revision:          0500
      Cell Revision:          0102
      Charge Information:
      Charge remaining (mAh):          0
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          0
      Health Information:
      Cycle count:          1128
      Condition:          Replace Now
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          9596
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          0
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Automatic Restart On Power Loss:          No
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          No
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          15
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:
      Charging:          No

    Hi Marlisa,
    #1 Your battery should be replaced if it has actually gone through 1128 cycles. Most batteries don't last near that long.
    #2 Reset the SMC

  • Could I have got a new power adapter for free?

    My power adapter for my mac stopped working recently and as far as I know I didn't cause any damage to it myself.
    I read the following on the apple website:
    Additional Information
    Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.
    Which seems to suggest that even out of warrenty, if the charger has broken of it's own accord you can still get a free replacement?
    I took my adapter and mac to the shop, they said there were no signs of accidental damage but said I still have to pay for it. I referred to this statement from the website but they were very dismissive and kept saying it was out of warrenty. Perhaps i'm reading the statement wrongly.
    Just wondered if anyone could clarify :-)

    As you indicated, it depends on the results of the evaluation.
    Apple takes responsibility when design faults cause certain failures, especially when it represents a safety concern. There have been a small number of cases where failure met certain characteristics that Apple deemed that it should not have happened, regardless of age or use.
    I am reluctant to indicated the specificity of some of these issues, because for many reasons Apple would not want us speculating on the subject. Suffice it to say your product failure may not have met any particular characteristics associated with failures deemed to have extended coverage.
    If your product failed for an unknown reason, or apparently a failure stemming from age or normal life expectancy use, and it was after the normal expiry of warranty, then no further consideration was given. You need to buy and pay for a new one, unless you yourself, can provide extenuating circumstances to consider.

  • New Power Adapter Doesn't fit right

    The power adapter for my iBook G3 started only working when it really felt like it, so I check the discussion boards about buying a new one. I saw the link about Shentech.com, which indicated their power cord was the same as the one bought from the Apple Store, though it cost about half as much. I bought this one, but when it arrived (it was delivered VERY quickly), I was concerned because I have to force it into the computer. It charges the battery just fine, but I am concerned about ultimately doing damage to the computer. It is a model A 1036. Has anyone else had this issue? Since I didn't buy it directly from Apple, can I still ask Apple about it, as it is an Apple Product?

    Hi, Katie. Welcome to Apple Discussions.
    Yes, I have the exact same issue with the 65-watt adapter I bought from Shentech:
    http://store.shentech.com/apge24v265ws.html
    I thought perhaps it was because I bought the 65-watt instead of the 45-watt that originally came with the iBook. I always keep an extra on hand, and that super-tight one has been relegated to "extra" status. I am always VERY careful any time I plug it in.
    If you are very worried about it, maybe you should call Shentech and ask for a replacement. They may be refurbishing them. Even though it says "new" on their website, mine is a bit scuffed, and does not LOOK new.
    A call to Apple about it may shut Shentech down if they are selling refurbished Apple products as new, but maybe that would be the right thing to do?
    I'm afraid this isn't much help, but it does let you know that you're not alone.

  • Power adapter light is dim, new power adapter no light at all

    My power adapter went dim and wouldn't charge. I bought a new adaptor and this one doesn't light up at all. Any ideas? tried different outlets that have worked for other electonics. Did I just buy a second adaptor coincindentally?

    Try this. Intel-based Macs: Resetting the System Management Controller (SMC)

  • New iPad (3) overheat after fully charge

    My New iPad (iPad3) has been very hot especially along the left edge and so hot that the iPad cannot be hold on hand.  It has happened twice, both incidents after a fulls cycle charge by Kingsoft Battery Doctor.  Put the iPad into sleep mode did not help.  I ran the System Activity Minitor and the CPU was using only 4% and I was doing simple tasks like reading eBooks without using Cellular data or WiFi.  Power off was the only way to stop it getting hotter.  The New iPad didn't get so hot if it didn't start from full cycle charge. 

    You are using third-party software to control the battery charging.  I'm not sure why you think that's a good idea.  It reads as though the software is damaging the battery by attempting to overcharge it.  If you take your device to Apple for inspection, I'd bet that you'd be told that using the software violates your warranty.  Regardless, try removing the software, and see if your device works properly.

  • New power adapter fail

    My friend lost my original power adapter and she bought me a new adapter, however, this adapter causes me lots of problems-it works sometimes, but often I found it failed to work(the light is off, doesn't charge at all), you never know when it is gonna work, I wondering if the adapter has defect?

    there was an SMC update for that.
    http://support.apple.com/kb/TS3499
    http://support.apple.com/kb/DL1311

  • Is it possible to use the firewire power adapter for ipod to charge an Ipad

    There is information everywhere that the Ipad doesn't charge with low power adapters.
    The first power adapter I received with my first Ipod was the firewire power adapter and it allows intensities even higher than the 10 W Ipad adapter.
    Could this old adapter be used with Ipad
    Model n. A1070 output 12V 6.7 A if I believe what is written on it.

    You should only use a USB-type charger for the ipad. Any other charger is risking damage to the ipad.
    The ipad uses 5Volts at 2 amps for best charging. This is why it came with the wall charger.
    You can charge it with any 5 Volt USB charger as long as the output amps is approximately 1 amp or more. If the amps rating on the charger is less than 2 amps, it will charge slower, but it is safe. The ipad will only draw the current it requires, but any voltage higher than 5 volts is risking damage to the ipad.
    Hope this helps.

Maybe you are looking for

  • Accordion Panel problem in IE

    Using DW8 - and Interakt Ajax tookit, I have an Ajax panel that contains the Spry Accordion. I have tried EVERYTHING, and although it works perfectly in Firefox, the panels open slightly as soon as you mouse over or open any of them. I have tried edi

  • I-mate WLAN connection not working

    My connection was perfect before setting network key to my SMC router (SMC7904WBRA2). But after setting the key, I could connect my laptop, but not my i-mate PDA2. I can't remove the key also as I don't have the password to login to 192.168.2.1.  I a

  • Javascript for onchange of a selectlist.

    Hi, I have a requirement. There is a selectlist in my form. Once user selects a value in this, I have to display 6 or 7 fields. How can I write a javascript to do this and attach to the selectlist ? I am new to javascript. Can anyone point me to some

  • In Production Return & Rejected Qty Prod Order wise required

    Hi Experts, In Production, Parent Item to be produced 100. Two Child items are there for the parent Item. Parent Item A- 100 Qty Child Item A1- 100 Qty -- Issue method Back flush Child ItemA2 -100 Qty -- issue method Manual Child Item A2 Issued Manua

  • Why, when right click on some link the options "OpenLink in New Tab" and "Open Link in New Window" are exchanged?

    Why, when right click on some link the options "OpenLink in New Tab" and "Open Link in New Window" are exchanged?