New powerbook - airport extreme does not connect after Tiger update

Hi guys,
I see a lot of people are having problems with airport right now. I just got a new powerbook that worked fine with Panther, went online without a hitch. I downloaded a couple of software updates but don't know which. Then I installed the Tiger software and since then the computer does not connect. It show a wifi signal but tells me it can't connect etc.
Any ideas,
Thanks
Sabina

Hi Sabina,
I had the samething happen to me. I talked to tech support and they just had me click on the blue apple at the top- go to software updates- than I ran that...there was an update in there that corrected my problem. and I have been able to get get back my network!!
so give that a try.
~Janet

Similar Messages

My new airport express does not connect my printer to my computer? My old airport did! then I updated to OS 10.9.2. How do I get it connected?

My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? Help

Contact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list.

My airport extreme will not connect to the Internet

My airport extreme will not connect to my toshiba router. I connected it to my office internet this morning but when I hooked it up at home it simply will not connect. I have tried resetting all the settings and have had no luck. It did work once upon a time. I currently have my airport express hooked up so I know there is connectivity.

I could never figure it out after trying everything I could and going to the genius bar I ended up just purchasing another extreme. The really funny thing is that I can set up a network between the two and it works fine. I am using it at work now with out any problems so I guess there is really no loss :-?

Internet connection is through airport extreme is not connected

internet connection through airport extreme is not connected maybe there is a problem setting it up

Is it possible that using a Netgear Router connected
to the AE (which is also a router if I understand
correctly) could cause connection problems ?
Yes.
Ensure that that the AEBS is configured to not distribute IP addresses.
Also ensure that the AEBS is on a different channel to the DG834G.
iFelix

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

New AirPort Extreme will not connect to internet

Purchased AirPort Extreme to replace older D Link 655 router. All of my Apple gear has been plug and play except this
Extreme router. I cannot get an internet connection to save my soul. I tried connecting thru both my MacBook Pro and my HP Pavilion dv6. I just assumed I could move the ethernet cord from the DIR-655 to the AirPort and all would be fine. Not so. I have reset, unplugged and restarted so many times I lost count. Nothing works. What am I doing wrong. I even swapped out at store where I bought thinking I had defective router. any ideas? My wife works from home and I really need a better router with greater reach and thought this was it. Please help.

Simply restarting the modem will not always allow it to reset correctly so that it will issue a new valid IP address to the AirPort Extreme.
Power off the cable modem completely for at least 30 minutes....longer will not hurt. Be sure to unplug the power cord from the back of the modem or unplug the power cord at the AC wall jack. If the modem has an easily accessible battery, pull the battery.
Power off the AirPort Extreme as well.
After the modem power down period, insure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme. Reinstall the modem battery if it was installed previously.
Power up the modem and let it run for 10 minutes by itself.
Then power up the AirPort Extreme and let it run for a few minutes. Check to see if the Internet connection is working correctly now.

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

HT1752 iMac flat panel 2003 shows airport but does not connect

Hi,iMac flat panel 2003 shows airport but does not connect

No problems.
Let's double-check your iMac's Internet Sharing configuration:
To setup for Internet Sharing (Wired to Wireless):
Setup the Network
Cable Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > MacBook
Enable Software Firewall (iMac)
System Preferences > Security > Firewall
o Block all incoming connections (enabled)
Enable Internet Sharing (iMac)
System Preferences > Sharing
o Select "Internet Sharing" from the options in the left column
o Share your connection from: Built-in Ethernet
o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
AirPort Options... (iMac)
o Network Name: <anything you want>
o Channel: Automatic
o Enable encryption <do NOT enable at this time>
o Click OK
o Select "Internet Sharing" again
o Click "Start" to start Internet Sharing
o Click Start
Please verify these settings, and try accessing the Internet from the MacBook again. For this exercise, I suggest co-locating the MacBook with the iMac.

Airport Express does not connect to the DSL Ethernet

I have had an Airport Express (AE) for several years working with no issues. I bought the newest version a month ago and have been trying since to get it to work. I can not get it to recognize the ethernet cable being plugged in when I try the "replace existing device" set up, I can not get it set up when I try "set up a new network. It does not work when I try to use it as a range extender. I tried many things, went to the apple genius bar three times, they gave me a new one. Same thing. I did factory settings resets, etc. I canged channels. Nothing works. Any ideas what else can be wrong?

What version of AX do you have? And what setting do you have it configured for (such as Create a Wireless Network)?

MAC Mini does not restart after Yosemite update

I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems. I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
Any help or ideas appreciated
Larry

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

New AirPort Extreme will not Connect to iPhone 5

I just upgraded my old AirPort to an AirPort Extreme. Everything seems to be working fine, except my iPhone 5 will not connect to the new Airport. When it is selected as the new wifi option, the connection wheel just spins and spins and it will not connect to the wifi.

Reset the airport to factory and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
In the new setup, keep all names short, no spaces and pure alphanumeric.
eg AEgen6 for base station name.
Since you have issues with wireless name the bands differently.. AE24ghz and AE5ghz
Set no security to begin with.. Set 2.4ghz to channel 11, 6, 1 in that order.
Once the iphone connects.. please set WPA2 Personal security with a pure alphanumeric password of 10-20 characters.

My new airport extreme does not see the hard drive

I have a new airport extreme with a hard drive connected to the USB port but the airport can't see the disk. I verified the firmware and is 7.7.1
http://support.apple.com/kb/DL1665
Disk was working good but after Mavericks, the problem start.
Any suggestion?

I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

AirPort Extreme does not show in list

I have tried rescan, reset etc but my new AirPort does not appear on the list in the AirPort utility and flashes amber. My 2 other base stations are fine. Is it faulty or am I doing something stupid?
PowerBook G4 Mac OS X (10.4.9)

derek61, Welcome to the discussion area!
Verify that you are using "AirPort Utility"... not the older "AirPort Admin Utility".
Try temporarily connecting to the AirPort Extreme base station (AEBS) with Ethernet. Configure the AEBS so that it is using a channel between 1 and 11.

IBook G4 Airport Extreme does not see any SSID

Hi,
My iBook 1,2 Ghz has been working great for several years now.
I am working with Mac OS X Tiger (10.4.11) for quite some time
and it never let me down. I connect to the internet using an Airport Express
connected to a speedtouch router.
The Airport Express Card in my iBook always found 6 or 7 SSID's of other
Wireless Networks in my neighbourhood and it used to login automatically on
my Airport Express wireless wetwork station.
Last week it suddenly stopped working correctly.
After starting OS X on my laptop the little Airport icon in the upper bar faded out grey.
When I click it it says it can't find any networks.
I checked all my settings, downgraded my Airport Extensions
and even installed a spare (refurbished) Airport Extreme Card.
Even with another Airport Extreme Card it does not see any wireless networks.
My other macs, a unibody MacBook Pro and white MacBook work fine with the Airport Express.
What could be wrong? Am I overlooking something here? Can somebody help me out?
How can i get my Airport Express/iBook G4 connected to my wireless network again?

Hi Elko,
Thanks for the reply.
I re-installed the original Airport Extreme card into the slot again.
But now i pushed it harder than the first time. (just like you said)
I noticed the second click, but that doesn't seem to be the problem.
Both Airport Cards (the original and the new) were installed correctly.
I also checked the antenna connection but that is seated o.k. too.
After re-installing the card, i booted into Mac OS X Tiger and checked the ASP.
It says a Airport Extreme Card is installed with firmware version 405.1 (3.90.34.0.p.18)
and the langauge version is international/worldwide. So far, so good.
Nevertheless the airport card does still not find any wireless networks or SSID's after
scanning multiple times. (Location on automatic)
I am planning an upgrade to Leopard today. Maybe that's gonna help, since there were some Airport Extreme updates in Leopard. If that's not the solution, I will stay with your other suggestion and buy me a nice USB dongle.
Do you have any idea what type of dongles work best with Leopard? I have seen some different models, but a lot of dongles require third-party software to make it work and are not automatically recognized by OS X.

Airport Extreme does not recognize external drive a drive

I have an airport extreme base station with an external drive connected to it. For quite a while the drive correctly displayed as a drive and could be used for time machine backups. All of a sudden the drive is only being displayed as a shared folder. It does not appear in disk utility drive list. If I connect this drive directly to my mini or macbook it is handled as a drive and can be used by time machine. As I said, the drive had been working perfectly for backups until somewhere around july 5. I did try loading an older firmware onto the airport, resetting the airport using the reset button, and I also upgraded the airport to the latest firmware release. All of these steps did not work.
Any feedback would be appreciated
john

this *****, pardon my language. I tried using a usb connection on a netgear router and that didn't work. someone on one of the mac forums told me it would work with an extreme base station. The description of the base station said
>>
Share your hard drive.
You can share an external USB hard drive over your wireless and wired networks by simply connecting it to the USB port on your AirPort Extreme Base Station. Called AirPort Disk, this feature is perfect for sharing files and more.
>>
like I said earlier, it did work for 10 months then just stopped. I did read the link you provided. So as it stands I just have to wait until I can dig up more cash for a new base station which isn't happening anytime soon.
oh well, thanks for the help
john

New powerbook - airport extreme does not connect after Tiger update

Similar Messages

Maybe you are looking for