New printing problem with InDesign CS4

After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
"Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
Any help would be greatly appreciated!

Wanted to let folks reading this know that I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver
for OS X 10.7.2.
Aisolve over on the Adobe board was also helpful in advising me that if I was able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.
Thanks, Apple and Aisolve!

Similar Messages

Print problems with InDesign CS4

Hi,
I have been using InDesign CS4 for the last few years and been printing large format on an HP Deskjet 9560. I always got good color quality on the printouts. Recently, I updated the software on my MacbookPro to Snow Leopard and I was forced to get a new printer, the HP Officejet 7610. When I try to print a docment from InDesign the color quality is really poor. I believe that this is an application issue because I am not having printing color issues from other applications. Can someone please advise if I need to change my settings in the document for printing to help with this color issue?
Thanks,
Kim Shephard

Unfortunately, I have tried this. I choose 'layout' from the printer option within the driver and pick 'short edged binding'. Still no luck.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

HELP- Printing Problem with Photoshop CS4

Hello Everyone,
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots, can someone please help me. Is driving me crazy.

Really I'd be willing to bet it's your driver under Vista.
I have the same problem using Vista and a older HP LaserJet, under XP and CS2 it prints well. Under Vista it's a bunch of dithered pixelated dots.
They want you to buy a newer printer.

Printing problem with Photoshop CS4

Hello Everyone,
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots, can someone please help me. Is driving me crazy.

I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon.

Problem with indesign CS4 program

I've searched for this already but have had no luck finding a fix. My problem is that when I am running indesign CS4 on my laptop I cannot select the master page nor any other pages. Also certain other controls are not functioning like ruler guides, scroll, direct select tool. I have become so frustrated with it. I am running it on my desktop just fine and have no issues at all. My laptop is running Vista home prem. 64 bit. its an intel core 2 duo @ 2.26 Ghz, 4GB ram video card is a Geforce 9800m GTS with 1 GB ram. I have uninstalled all my CS4 (design premium) programs ran adobe clean script reloaded CS4 design prem. and still doesnt work right.
(all the other programs in CS4 design premium work fine except Indesign)
I have already tried running it as admin with no luck.
I am not in preview (I cannot even select preview)
Please can someone help me???

Alrighty, I finally managed to fix MY problem; I don't know if it will deal with your problem, saltydog.
After losing an entire day to uninstalling, reinstalling, updating, and banging my head against the wall, I stumbled across an unobtrusive little user comment at the bottom of that "Troubleshoot system errors and freezes in InDesign and InCopy (CS4 on Windows)" TechNote.
User Carolyn Ccc posted this:
"Before tinkering with files, reinstalling, creating new admin accounts, et cetera... I suggest checking your monitor's "DPI Scaling" setting. The problems seem to have cleared up for me when I re-set to the default (96dpi) rather than the 120dpi I'd selected for the benefit of my aging eyes."
And user Carolyn Ccc was right. I, too, had my monitor set at 120dpi, since I am slightly visually impaired. Changing the scaling was a magic bullet fix for all the problems I was having.
I am just hoping that Adobe will kindly develop a patch that will allow InDesign to function correctly at the greater DPI scaling, for people like me who need the larger resolution on their monitor. It is very tedious to have to switch back and forth every time I want to do a little work in InDesign.

Problem with InDesign CS4, InCopy function disappear

Recently found InDesign CS4 always create many tmp files in the hard disk, and the function of exporting file to InCopy was disappear in the menu bar, what should I do? How to fix it?
Should I re-install the InDesign?

Alrighty, I finally managed to fix MY problem; I don't know if it will deal with your problem, saltydog.
After losing an entire day to uninstalling, reinstalling, updating, and banging my head against the wall, I stumbled across an unobtrusive little user comment at the bottom of that "Troubleshoot system errors and freezes in InDesign and InCopy (CS4 on Windows)" TechNote.
User Carolyn Ccc posted this:
"Before tinkering with files, reinstalling, creating new admin accounts, et cetera... I suggest checking your monitor's "DPI Scaling" setting. The problems seem to have cleared up for me when I re-set to the default (96dpi) rather than the 120dpi I'd selected for the benefit of my aging eyes."
And user Carolyn Ccc was right. I, too, had my monitor set at 120dpi, since I am slightly visually impaired. Changing the scaling was a magic bullet fix for all the problems I was having.
I am just hoping that Adobe will kindly develop a patch that will allow InDesign to function correctly at the greater DPI scaling, for people like me who need the larger resolution on their monitor. It is very tedious to have to switch back and forth every time I want to do a little work in InDesign.

Printing problem with Photoshop cs4, need help

I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2. I CAN print from other programs such as TextEdit or Pages. And my printer prints a test page without any problems. However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it. Does anybody know the reason for this?? Thank you for your help.

I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon.

Printing Problems with Photoshop CS4

I am having problems printing with Photoshop CS4. When I go to print, I get a very small version of my created document. If the image is 8"x5", it prints 1"x2" in the upper left corner. I read other forum answers that said"delete the fax/printer" so it won't delete to the fax machine, but that doesn't work for me. Any suggestions to fix this?
Thanks.

dumasmar,
Doesn't sound like a Photoshop issue.
What do the iPrint people tell you? I had never heard of iPrint before, had to Google them.
Incidentally, it's Photoshop not PhotoShop.

Printer error with InDesign CS4

I have the Adobe Master Collection installed on Windows 7 64bit (Pruchased through MS Volume License). Before installing windows 7, the system had Windows Vista Business 64-bit installed and had the same problem, so it is not OS related. Connected directly to the computer via USB cable is an HP Design Jet 130. All programs are able to print to it without any problems including Photoshop (64bit), Adobe Acrobat, Illustrator (32bit), Excel, Word, etc. However, when trying to print a document from InDesign, I get the following error:
print driver host for 32bit applications has stopped working
After click ok, the printer selection box comes up, with the post script printer selected. When you go and try and change the printer to ANY other printer including the DJ130, I get the following error:
Printer selection failed. Restoring the previous selection.
I am still able to print documents from InDesign by saving them as a PDF and then opening them and printing them with Adobe Acrobat Pro, however, I should not have to do this, and this can become very time consuming. The printer is also shared on the network with two other computers and they have no problem printing to it from InDesign. Before I installed Windows 7, I completely un-installed the Master Collection. After Win7 was installed, I re-installed the Master Collection, and I was able to print perfectly from Adobe InDesign. It seems that one of the updates breaks it's printing capabilities with this printer, or at least on this system.
Has anyone else experienced this issue, or are there any other things that I can try to resolve this? I have 8GB of RAM in the system and don't really see switching to a 32 bit OS to be an option as I would loose the ability to use 1/2 of my memory.

I am having the exact same problem. I have Windows 7 Pro 64-bit and Design Premium CS 5.5. InDesign is the ONLY program that will not print to any printer. I get the "Printer selection failed." error every time I select any printer, even the Adobe PDF one. I have a Brother printer, an HP Plotter, and even an Oce copier/printer. InDesign gives the error no matter what printer is selected form its own list. Photoshop and Acrobat do not give me any issues, nor does any of the MS Office programs nor Autodesk softwares. It's only InDesign that fails. Reparing doesn't do anything and reinstalling every printer driver is pointless because it's only InDesign that produces the error.
Does anyone know what to do to fix this?

Printing problems with Indesign and pdf

The fonts won't print after the InDesign doc has been turned into a pdf. It will print on some printers but not the large volume in our print room.

You need to provide an awful lot more information that what you have provided to us in order for us to assist you.
What version of InDesign? What OS? What PDF presets? What printer (brand and model) is it failing on? It the printer a direct PDF printer or are you printing to PostScript via Acrobat or even something else? What fonts won't print? Error messages? An example?
- Dov

PDF printing errors with InDesign CS4 docs

I've discovered somewhat belatedly that since upgrading from CS3 to CS4, every pdf I have created in InDesign (a dozen or more) won't print. After a general error message, "the document could not be printed," I get one or both of these messages: "there were no pages selected to print" or "a drawing error occurred." I have variously tried every page selection option to no avail. I have also tried recreating the pdfs from the original ID files with different export settings, again with no success. PDFs exported from other programs are not a problem, nor is printing from InDesign. I'm on a Mac. Any thoughts?

My (admittedly Clonescript) HP prints this without error messages but prints in Courier anything done in Optima ExtraBlack, which claims to be embedded, but seems not to be. My PCL printer prints this without errors or problems.
If I bring this back into CS4 and export back to PDF, it prints properly in Optima ExtraBlack.
If I edit it in Acrobat 7, I can change Optima Extrablack (not on system) to Optima Extrablack (on system) and it prints properly.
I would want to look into your Optima Extrablack font. First try substituting different fonts, something generic like Helvetica (not as a solution, just as a test). If that fixes it, try substituting something generic only for Optima Extrablack (the "A House of BRIC" head and the drop folio). If that fixes it, make a document that uses only Optima Extrablack. If that fails, look into uninstalling and reinstalling Optima Black.
BTW, you don't have Reader 8 and Acrobat Pro 9 installed on the same machine, do you? This is not recommended, although I don't know what particular problems it causes.
There's quite a bit about the drawing error if you google it. In particular, this might be relevant (while somewhat off-color): http://groups.google.com/group/adobe.acrobat.windows/msg/8dc9a7dfea59a57d?hl=en&
Ken

Font printing issue with InDesign CS4

Hello all,
I am at my wits end with a small but particular problem. I have an InDesign publication that is using a "Hands" font. For some reason, InDesign will not print a particular text box with just one "hand" character. However, it will print the same hand character in another text box. He're the other weird part. When I export the document to a PDF, the missing hand prints just fine! InDesign just doesn't want to print this particular box and font. Has anybody ran into this problem before?
Thanks a bunch!

Alec is right the easies way to handle this is to create Outlines which effectively converts the type to a vector shape.
To be on the safe side I always drag a duplicate of my type outside the print area directly to the left using alt + shift key, that way i still have live type that I can edit if I have to go back. It also keeps the font embeded in the document when I package it so it can be identified by the pritner if needed for some reason.Then I export the PDF and run a Acrobat PRO preflight just to be safe and correct anything in the profile.

Printing problems with InDesign PDF booklet

I've created a booklet in InDesign and exported it to PDF for my printer. In the PDF file all pages show correctly, until you print.
One page prints blank. It's a full page photo on that particular page. I have tried re-linking, exporting different PDF types, and even dropping a new file in.
My printer is convinced I am trying to sabotage her, how do I get that one page to show up in final printing?

Which version do you use?
Did you patch your InDesign to the latest build of your version?
Which OS?
What type are the missing images? Filetype?
Is your layer set to print?
If possible could you show us a screen shot of that particular page including the layer panel, opened all layers so we can see what is on that page. If pyossible show also the link panel with the missing file selected open to all information.

New printing problem with InDesign CS4

Similar Messages

Maybe you are looking for