New problem again, This operation could not completed as there's no video

I don' t understand what is the problem, I work with FCP 6.0 and Quicktime 7.4.1 very well until today, when I tray to capture from DV devices ( note that the capture window says PREVIEW DISABLED , but I can remote the camera, mark tc in , out FFW REW etc, message VTR IS OK) The capture is aborted with this message THIS OPERATION COULD NOT COMPLETED AS THERE IS NO VIDEO, when I tray to capture from JVC PRO HD there is no problem. ANY IDEAS????? I'm not work whit another FCP version because with other version there is a problem with JVC PRO HD DEVICES . I note that I'm not the only one with this problem, another curiosity is that at this mooring I capture a tape without a problem but with the second tape start the problem when I thread the tape. Who is possible that the problems are like a miscellanies problem. In the system profile the Camera and vcr dv appears connected to the mac. The fire wire is ok.
<Edited by Moderator>

Hi of course I use the correct easy setup,Ii tray with different cameras, vcr's, vtr's, dv , Dvcam, I tray with different fire wire etc. Note that "IMOVIE" capture material without problem, same tape, this problem is affected to other people, included me , but for week i no have this problem with FCP 6.0 and Quicktime 7.4.1 this problem starting to day in the middle of the batch capture, the first tape was captured , but in the second tape start the message, WAITING FOR TIME CODE, THE DEVICE MUST SET IN VTR MODE, of course that this two things are ok, and appears then message "This operation could not completed as there's no video" Note that quicktime pro is unable to capture material from DV device too. Imovie work OK with the same camera and vtr and the same tape. The problem is quicktime and FCP.
http://discussions.apple.com/message.jspa?messageID=7418664#7418664
http://discussions.apple.com/message.jspa?messageID=7390713#7390713
http://discussions.apple.com/message.jspa?messageID=7365555#7365555
http://discussions.apple.com/message.jspa?messageID=7344941#7344941
http://discussions.apple.com/message.jspa?messageID=7335764#7335764
http://discussions.apple.com/message.jspa?messageID=7335763#7335763

Similar Messages

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Help! HDMI adapter sometimes works, sometimes not. "This operation could not be completed."

Hi,
I bought an HDMI adapter/cable, and I have trouble playing iTunes-purchased videos when connected to my iPad 2. 90% of the time, I'll plug it in and see my iPad mirrored exactly on the TV. But when I try to play an iTunes TV show, the video screen will close and display: "This operation could not be completed." I can play non-iTunes videos and shows just fine on the TV, though, so I know it's not really a problem with the adapter/cable.
I fiddled around with it, and 10% of the time the iTunes TV shows magically start displaying on the TV. If someone walks by and accidentally unplugs the cord, though, it'll stop playing iTunes purchases when I plug it back in. I have no idea what actions or combination of actions cause the iPad 2 to suddenly play the videos.
I've tried everything. Restarting the iPad 2 with the adapter in, restarting the iPad 2 with the adapter unplugged, changing cable positions, etc.
I even tried to swap out the HDMI cable, but the same thing happens with another brand new HDMI cable. Funnily enough, my iPhone 4s plays ALL purchased TV shows fine on the TV without a single hiccup. My iPhone 4s and HDMI adapter/cable get along really well . This problem is specific to my iPad 2.
Any clue how to remedy this? Thanks!

I see no one has addressed this issue. I'm having the same problem but no one seems to have an answer. Did you ever get this issue resolved Joe?

This Operation Could Not Be Completed...No Video

So I'm getting this error message "This Operation Could Not Be Completed...No Video" when trying to Log and Capture some footage from a mini DV tape.
I've tried this on my Macbook Pro, 10.5.8, Final Cut 7
I've tried this on my Powerbook G4, 10.4.11 Final Cut 5
I've tried to capture the footage directly into both machines and via external drives.
My deck is a Sony PD170. After getting this message I tried another tape on both machines. No problem capturing this footage. This tells me it is not a firewire issue.
Is it possible that this is a tape/capture setting I'm missing? I've used every NTSC setting possible.

Not familiar with this camera, but here are a few questions/ideas
When you play the tape in the camera, can you see the tape settings displayed on the camera's lcd? This may be a menu setting or a button push. What exactly are the settings?
Was the tape shot on this camera? Sometimes, there can be compatability problems with material shot on a different camera. I think some cameras will playback dvcam material via the video outs but not via firewire, Could this be the problem. I have some memory that there may be other formats some cameras will playback via video out but not firewire.
Hope this is of some help.

This operation could not be completed as there is no video - capturing PAL

Ok, I tried all the suggestions I've seen here. I have a Sony FX-1000 and I'm trying to capture a PAL mini-DV tape (which is easily read and played on this camcorder) using Final Cut Pro - latest version. The connection is iLink / Firewire 800 and has been used to capture many NTSC videos in the past. I have tried all settings on Final Cut Pro - under Capture Settings - to no avail.
In all cases, "Preview Disabled" is displayed in the color-bar window. However, the playback controls (rewind, play, ff) all work fine using the buttons under the window. The miniDV plays fine on the camcorder - both picture and sound.
After starting the playback, and pressing "Capture Now", I get a solid black window indicating that the capture software is "waiting for timecode", even with the tape obviously playing. After about 2-5 seconds, I receive the error message "This operation could not be completed as there is no video".
I've tried several computers, several cables (both Firewire 400 and 800) - as well as all the PAL settings and FC Pro and FC Express 4.0. So, any suggestions? I could use some help.
Thanks

Solved the problem. I used an old Sony Handycam DCR-HC28 with Firewire connection and used Final Cut Express with the settings: PAL, DV-PAL DV Converter in Easy Setup.
I was NOT able to control the Handycam with this setting but I could start the capture and then press "play" on the Handycam and it captured. Strange way to solve the problem. Hope this helps someone.
BTW - the HDV FX-1000 did not work this way. I guess the cheap camcorder works better at this!
Thanks to all for the help!

This Operation Could Not Be Completed

Hey guys,
I work for the Dallas Cowboys as their multimedia coordinator. I've been having this problem for some time, but after months of frustration I think it's finally time to ask for some help.
Basically, on a very inconsistant basis, an uploaded videos mobile component (mp4) file won't work on my iphone when I test it. I currently have one video doing just that. Here is the link to our mobile multimedia page.
http://www.dallascowboys.com/multimedia/mobile_multimedia_center.cfm?id=3770C765 -CA7A-8B74-A8D0D5A4DFFC1422
The mp4 will work on on a browser, but gives me the error "This operation could not be completed" when trying to view it on my iphone.
The only common issue I can see in files with this issue is that they tend to be the videos with more production value. I generally encode these files in Adobe Media Encoder, but have also tried them in compresser with no luck.
Any ideas?

Are you processing on the CPU or the GPU? What graphics card are you using? Do you have the latest graphics driver for your graphics card? How much RAM is in your machine? Are you running 32-bit or 64-bit Photoshop? What size images are you processing?

Capturing PAL: "This operation could not be completed...." Help!

Hello,
I am attempting to capture PAL footage from a miniDV tape. I am using a Sony DSR-11 deck. From the Easy Setup menu, I select DV-PAL. In the Log & Capture window I select Capture Now and the the follow error message appears:
"This operation could not be completed as there is no video."
Any tips?

Did you make sure the DSR-11 was in PAL mode? The switch on the back.
Shane

Hi,when ı work on photoshop suddenly my computer restart but i have saved my project before restart.and when ı want to open my psd , photoshop alert me with this messagge ;Could not complete your request because the file is not compatible this version of

hi,when ı work on photoshop suddenly my computer restart but i have saved my project before restart.and when ı want to open my psd , photoshop alert me with this messagge ;Could not complete your request because the file is not compatible this version of photoshop ..ı tried all versions but cold not open again.there was a very ımportant work for two days.can you help me please?

tworules wrote:
…photoshop need a recovery or auto save system.
tworules,
You haven't mentioned the exact version of Photoshop you are running. As the always helpful and knowledgeable JJMack told you, new versions of Photoshop do have auto save and recovery when enabled in your Photoshop Preferences.
However, no auto recovery and/or autosave is a match for a defective machine. As suggested by Mr. Cox, you should do a thorough inspection of all your hardware ASAP.

On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When I try to upgrade to Mountain Lion OS, after I select the "Buy App" option I get this "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed" message, how can I upgrade?

When I try to upgrade to Mountain Lion OS form Lion OS, after I select the "Buy App" option I get this "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed" message, what is causing this problem, how can I find a solution, is someone else having this problem?

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

Still unable to download M. Lion, always get this message "Could not complete your purchase, Unable to verify file distribution. It may be damaged or unsigned." !!!

Still unable to download Mountain Lion, always get this message "Could not complete your purchase, Unable to verify file distribution. It may be damaged or unsigned." !!! Do you have an idea about what's going on ?

Try starting up in Safe Mode..http://support.apple.com/kb/HT1455
Try the App store again.

When I try to use the refine edge command I get this message could not complete the refine edge comm

when I try to use the refine edge command I get this message could not complete the refine edge command because of programe error

Quit the editor, then restart it while holding ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

When I try to paste an CCI file into a PSD, I get this message- Could not complete the Paste command because the ICC profile is invalid. I need the layer to be an editable smart object! What's the solution? Ron

When I try to paste an CCI file into a PSD, I get this message… Could not complete the Paste command because the ICC profile is invalid.
I need the layer to be an editable smart object! What's the solution?
Ron

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

My iphone5 show this : We could not complete your purchase what can i do now ?

my iphone5 show this : We could not complete your purchase what can i do now ? i am from malaysia.. Urgent .. thx you

i reply already .. but still cnt do anything to complete your purchase ... so i have other chooice ? the one you give me the link i send the report already .. send me this
Kiran
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Customer First Name : HAN BENG
Customer Last Name : BAY
email :
Web Order # : buy gem
Support Subject : Downloading iTunes Store Purchases
Sub Issue : undefined
Comments : See additional info below
OS version: Windows 7
Country: Malaysia
Lang_Country: en_AP
iTunes version: iTunes 11
Apple ID:
Specific request: I receive an error message when I attempt to download
Item title:
Details:
Describe the alert message you received:
my iphone5 show this : We could not complete your purchase ..
TrackID : 130606051445
<E-mail Edited by Host>

Iphone 4 video from camera ''This operation could not be completed''

Hello.
Today I filmed an important video with my camera, it is really important, and i need it to work. I was in a bit of a hurry, so i got my phone out, filmed, and the camera app freezed, then i just pressed the home button and locked the phone. Now when i try to play the video, it says ''This operation coudl not be completed'', i know its the camera app freezing the problem, but can I fix this video in any way? Please tell me there is a way

Not familiar with this camera, but here are a few questions/ideas
When you play the tape in the camera, can you see the tape settings displayed on the camera's lcd? This may be a menu setting or a button push. What exactly are the settings?
Was the tape shot on this camera? Sometimes, there can be compatability problems with material shot on a different camera. I think some cameras will playback dvcam material via the video outs but not via firewire, Could this be the problem. I have some memory that there may be other formats some cameras will playback via video out but not firewire.
Hope this is of some help.

New problem again, This operation could not completed as there's no video

Similar Messages

Maybe you are looking for