New problem connecting time capsule to PC running windows 7

I have a time capsule/airport that has been connecting wirelessly to a PC running Windows 7 for almost a year. The PC is now unable to connect to the time capsule giving an error message of 53 regarding TCP/IP Netbios settings. I have attempted opening the airport utility and eliminating the spaces in the time capsule name but had no success. Any suggestions?

Start with a reset of the TC.. plug it into the computer by ethernet and redo the setup.. remember.. you have ethernet to bypass all the wireless voodoo.. you can do the setup without even having the TC in network.. pull it out.. plug straight into the computer with a short cable.. go to work..
If windows 7 still has issues.. then it is a win7 problem entirely.. reinstall win7 being the best solution.. !!
Well that is a bit mean.. in their multitudinous updates.. Microsoft will often send an update that results in some nasty effects they never had 10,000 different PC to test for. Sometimes you need to roll back the update..
Sometimes win7 just goes stupid.. go to device manager.. unload the wifi card driver.. reboot the computer and load it back again.. get the latest driver from the card manufacturer.
Also make sure windows hasn't decided it is now in a work or public location not home.. it does this at intervals.. randomly to introduce fun in networking.. turn off firewalls.. and start testing procedure.. ping the TC.. turn off ipv6 in both the win7 and TC.. etc. Loads of fun things to do.
I am not sure the error message is at all relevant.. never really needed netbios to work to get internet.. but go to the tcp/ip properties for the wifi card and make sure you check netbios over TCP/IP is on.

Similar Messages

Problems With Time Capsule Showing Up on Windows 7

I just recently got a job that requires me to connect to the company's TC but my PC won't connect. I installed the software, put in my login info, and Airport Utility comes up under "Programs." However, the TC fails to show up under "My Computer." I've tried turning off Windows Search and Indexing and then restarting my computer to no avail. Any help would be greatly appreciated!

Anyone?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

I am a fitst time user of the new airport extreme time capsule 2TB. I have a mac book pro and an imac. I installed the router today and got my computers online wirelessly. BUT I cannot get my previous wireless printers to connect with the router.

I am a first time user of the new airport extreme time capsule 2TB. I use a macbook pro and imac. I installed the router today and got on wirelessly. BUT I cannot get my 2 printers that were previously wireless to find the router signal. The worked fine on my current set up OS Mounitain Lion 10.8.4. Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue. Any help appreciated.

birdmanjay wrote:
... Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue.
Arguably, they're both right.
Changing your router changes everything, so your best course of action is to research the respective printer's documentation and determine how to reset them to factory default condition. Then, add them again using System Preferences > Print & Scan.
For that, I recommend you first "reset the printing system" according to these instructions: Mac OS X: How to reset the printing system. Its instructions for Lion are identical to those for Mountain Lion.
As the article states, it will remove all your existing printers, leaving the Mac's printing system in a similar "factory default" condition ready for you to create a new print queue for each printer, which you should probably do.
Apple's printing support documents contain a great deal of redundancy, but this one may be a good place to start: OS X Mountain Lion: Set up a printer to print wirelessly

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

Suggestions, Observations and problem with Time Capsule shares

*Some Observations*
The Time Capsule can take a long time to become active. This is especially true if using an extended or WDS network. I would suspect this is due to the negotiation between devices that it needs to do. I have on occasion believed it to be hung, only to find that after walking away for a bit it comes up. This also impacts devices showing up in the Airport utility.
Using a time capsule with one Airport Express B/G will work, but adding a second creates problems.
Extending a network with an Airport Express N seems to work well.
Best bet is to set up separate B/G and N networks and run your N network as N only at 5Ghz.
WEP provides no real security, so think of it as you would an open network.
*My Issue*
I am having an issue where the time capsule shares become unavailable. It is an intermittent issue, and I have been unable to identify a test case. This happens for devices connected over ethernet as well as wireless. The Time Capsule shows in the Finder list, but the volumes are not available. Connecting to them fails.
The device also appears in the Airport Utility list, but when clicking on Manual Setup, or guided set up, it causes a hang.
This results in Time Machine hanging when trying to initiate a backup.
I have also noticed that when this happens, the signal does start to get a bit flaky with "Roam (Beacons Lost)" messages. Wireless connectivity still seems to be very useable though. I can connect to other network shares through the Time Machine, but not to the shares on the Time Machine. The only way to recover from this is to power cycle the Time Capsule.
One thing I want to investigate more tonight is whether there are any issues with my keychain and old passwords in case there are multiple failed attempts in the mix that are doing something. Although I know of no lockout feature on the device.
Any suggestions would be appreciated. This is the second Time Machine, so I have seen this on two different devices. I am also seeing this issue across 4 different computers simultaneously, some via ethernet and some wirelessly. Time Capsule is 7.3.2

Hi,
I have pretty much the same problem, 1TB Time Capsule that works fine most of the time as a wireless router. Up till recently Time Machine backups just worked (as one would expect them to) wired and wireless. I went away for a week came back and now every time Time Machine invokes a back up process all of a sudden my wireless network goes down, Time Machine can no longer see the Time Capsule and all other devices (iphone / apple TV other non apple devices) no longer have connections (they see wireless but no pass through to the internet or each other).
I have tried resetting all sorts of stuff, re-deployed my network, changed IP / LAN settings to make it less complex, Yasu'd my mac, connected only via wires, cleaned out my keychain etc etc and still get the same problems and as per Chris's point airport utility also hangs and the only solution is rebooting the time capsule.
I am fairly frustrated with this! any suggestions / help would be gratefully accepted.
thanks
alex

New dual-band time capsule but computers only access 2.4ghz channel

Just set up a new dual-band Time Capsule (bought it prior to the latest release though). Everything is working so far - Time Machine, wireless internet - but I noticed that both computers in the apartment (2 Macbook Pros - one running 10.5.6, the other 10.6.1) are only accessing the wireless network on Channel 2 (2.4Ghz). And on the laptop running Snow Leopard, I'm only seeing transmit rates of between 50-100. On the Leopard laptop I see up to 130. Doesn't this suggest that the computers are only using the "b/g" band and not the "n" band? When I option-click on the airport menu icon on the SL laptop it does say PHY mode is 802.11n, but I have no idea what PHY mode means frankly.
I feel as though the laptops should be connecting on a much higher channel and seeing much higher transmit rates (closer to 300?), but I'm not at all well-versed in these wireless realms. Any help would be much appreciated...
thanks
Tom

Welcome to the discussions, Thomas!
+"And on the laptop running Snow Leopard, I'm only seeing transmit rates of between 50-100. On the Leopard laptop I see up to 130. Doesn't this suggest that the computers are only using the "b/g" band and not the "n" band?"+
If you were receiving "g" rates, the number would be 54 or less depending on the distance from the router to the computer, so you are seeing some "n" speeds from the 2.4 GHz network. I believe the default setting for this "guest" band is 802.11n (802.11b/g compatible).
Would suggest that you contact Apple as a number of users have reported that either the main network or guest network is not functioning correctly.
The default setting on the main network is 802.11n at 5 GHz, so if you have a good connection and are relatively close to the router, you should see speeds in the 200-270 range.
Many users assume that 5 GHz is a stronger signal, but the facts are that 5 GHz signals are absorbed by walls and obstructions much more quickly than 2.4 GHz signals, so depending on your home construction, distance from router, etc., the 5 GHz signal may not be strong enough. Your computers will connect to the strongest signal. If that's the 2.4 GHz band, that's where they will connect.

Airport unable to find brand new, never-used Time Capsule

I'd appreciate any help with this problem, as Apple doesn't seem to offer support for this product yet. I followed all the instructions to set up my new, 500 GB Time Capsule, but the Airport utility refuses to detect it. I can't see a way around this impasse--there are no buttons to click or anything like that, and the only troubleshooting suggestion that comes up is to make sure that the Time Capsule is plugged in (it is). The thing is obviously useless if my computer (MacBook Pro, purchased less than a year ago, running OS X 10.5.5) won't detect it. Again, very frustrating. Any help welcome.

Matthew,
If you have not yet resolved your issue, here are some tips that have helped others.
*_Time Capsule Has Disappeared From Airport Utility / Amber Light_*
*Reboot ISPs’ Modem & Time Capsule*
If you are using the Time Capsule as your only router then power down your ISPs modem.
Unplug the TC from the wall outlet.
Wait 10-15 seconds.
Next turn your modem back on first. Let it initialize and acquire an IP address (about 30-60 seconds).
Re-plug in the TC again.
After it has restarted (30-60 seconds), does it show up in Airport Utilities?
If not try "Rescan" from the File Menu.
If the above doesn't work, then…
*Cycle Airport Preferences*
Open Network Preferences.
Click “Turn Airport Off”, wait 10 seconds.
Now click “Turn Airport On”. Close Prefs.
Does it now show up in Airport Utilities?.
If not go to the “File” menu and select “Rescan”.
Does it appears now?.
If not, unplug the TC, wait 10 seconds, and plug it back in.
Does the TC show up now in Airport Utility?
If the above doesn't work, then…
*Hard Reset*
Take a look at this KB article. It will explain how to reset the TC:
[http://support.apple.com/kb/HT1300]
Make sure you hold in the reset button for at least a good 10 seconds.
Then you should be able to see it. Now follow this KB article to set it up again:
http://support.apple.com/kb/HT1178
Let us know if any of the above resolved your issue.
Cheers!

Problem with Time Capsule after backup session

I have a problem with Time Capsule after a backup session. Our two Macs (on Maverick) loose connection with the station and the only thing that seems to help is unplugging the Time Capsule and starting it again! After the next backup session the same thing happens again. The Macs seem not to be able to hold on to the connection and continually loose it. The iPhones and iPads that we have (4 units) are not affected - it is the Mac Mini and Mac Powerbook that experiences this problem!
I would be grateful for your help!
Thor

This is standard Mac issues and has been a bug floating around since Lion.. it hits some people worse than others.. but once it starts it is awful hard to get rid of.
Just to confirm the connection to internet is not a problem?? Just the hard disk drops out?
I recommend you
1. Reset the TC to factory.. and start over with all new names.. short, no spaces pure alphanumeric.
TC name and wireless name/s should conform. By default the disk share name is data which is fine.
2. Mavericks has changed over from using AFP to SMB for network filesharing.. why Apple why??
This is unhelpful to say the least. Many many people are struggling with TC and being unable to mount the network drive.
So do it manually and force it back to AFP.
In Finder use top menu, Go, Connect to Server.
Type AFP://TCname or TCIPaddress (it must be the network name of actual TC.. or its IP address)
When the computer locates the resource it will ask for a password.. it is public by default.. supply your password or public and save it in the keychain.
3. Delete the existing TM setup and start over.. See A4 here. http://pondini.org/TM/Troubleshooting.html
I cannot promise this will fix it but should reduce the problem to now and then.. rather than every time TM needs to backup.

Connecting Time Capsule with WildBlue Satellite Service

HELP! Please...
I am trying to set up Time Capsule to work with my satellite service, WildBlue, and I can't get it working properly.
Before WildBlue was installed, I connected my iMac and my wife's iMac (it's on Mac OS 10.5.0), one at a time, with Time Capsule directly via Ethernet and back-up each iMac.
WildBlue satellite service was installed yesterday and the installer had no idea how to hook everything up. It was his first install. I was able to connect the WildBlue modem via Ethernet directly to my wife's Mac and made it work. When I try to add the Time Capsule, that's where I run into problems.
I ran the Ethernet cable from the WildBlue modem to the Internet WAN port on Time Capsule and I could not get it to work at all via AirPort. I tried using AirPort Utility and System Preferences - Network and could not get anything to work. I then ran an Ethernet cable from one of the four Ethernet plugs on the back of Time Capsule to the Ethernet plug on the back of my wife's iMac and was able to connect to the internet and get email on her Mac. I tried to run Time Machine, but it can't find Time Capsule! The only way it seems that I can get her iMac to do anything is to either connect it directly to the modem without Time Capsule or run the Ethernet cable thru Time Capsule to the iMac and not be able to connect to Time Machine. I still could not connect my iMac (it's on Mac OS 10.5.4) via Airport no matter what I did.
Can someone help me so that I can get Time Capsule connected and working the way it should?
My understanding is that I should be able to connect Time Capsule to the WildBlue modem via Ethernet and then connect my wife's iMac directly to Time Capsule via Ethernet and still be able to run Time Machine to back-up her iMac. Her iMac and the WildBlue modem sit in the same room together and my iMac is on the other side of the house where I want to use AirPort to connect to Time Capsule so that I can back-up my iMac and have access to the internet. If this isn't the way it is going to work can someone explain it to me on how it should and how I should set everything up to work correctly?
Thank you in advance for any help you can provide me.
Rod

You can, but devices connected to the D-Link switch will drop to a maximum of 100 Mbps speeds. The Time Capsule supports 1,000 Mbps or Gigabit speeds.
If you plan to transfer a lot of files using Ethernet, the numbers speak for themselves.

Problems accessing Time Capsule on windows Vista

I have an iMac running Leopard and a laptop running Vista Home Edition. I'm having some problems accessing Time Capsule from the Vista machine. everytime I click to access the drive, a message appears in the menu bar of the window that says (not responding). I've tried leaving it. I've even changed my entire wireless network to bypass the original g router (belkin) to use TC, so I now have TC as my router, Belkin just setup as a wired broadband modem but I still get the same problem. The mac seems fine, although I have had quite a few issues with drop outs.
both machines have the latest version of Airport Utility and Bonjour.
The laptop is a recent purchase to replace a dead XP machine, this worked fine and I managed to get stuff backed up just before it died, thankgod.
Any help appreciated.

No problem seeing Time Capsule with iMac, Dell desktop XP Home, Dell notebook XP Pro, and Fusion with XP Pro. All installed according to the installation guide. Installed AirPort Utility on all machines and updated firmware to 7.3.1. To see the other machines, make sure file sharing is on. Firewall on the PCs may need to be turned off. The printer plugged into the USB port also worked with all the XP systems and the iMac with a few missing features on iMac (I am assuming different driver issues). BTW, logging onto the created network and accessing the Time Capsule HD are separate. If you've entered different passwords for the HD and wireless networking when setting up Time Capsule initially (which I did through the iMac first), you'll need to enter them separately with the XP machines. You could also try resetting Time Capsule. Seems to work for others.

I have a modem from my cable company that provides WiFi. When I try to connect time capsule to the modem via an ethernet cable I am unable to and I also lose my wifi connection

I have a modem from my cable company that provides WiFi as well as ethernet ports for internet TV and Sonos. But when I connect Time Capsule via an ethernet cable to the back of the modem I am unable to get it to work and I lose my wifi connection completely. I added Time Capsule to back up data and also to extend the reach of my wifi with an airport extreme hooked up by another computer.

Put the TC in bridge before you plug it in.. ie do the setup in isolation to the rest of the network..
I would also start a new wireless name on the TC so it is different to the cable router..
If you want to be exacting also set wireless channels so the cable router is set to say channel 1 and the TC set to 11 for 2.4ghz. Then plug it in.. you will have no trouble as the TC will get an ip address as part of the existing networking.. then extend the wireless using the extreme.

I want to connect Time Capsule with Time Warner modem

How do you connect Time Capsule to a Time Warner modem? I am upgrading my Wi-Fi to AC and have a Motorola modem without AC, router and WiFi. I could just upgrade the Motorola modem, but I would like to use a Time Capsule. My connection to Time Warner usesd a splitter that goes to a DVR with the other end going to the Motorola modem by way of a coax connector.

Connect an Ethernet cable from one of the LAN <--> port on the Motorola modem/router to the WAN "O" port on the Time Capsule.
Power up the Time Capsule for a few minutes. At this point the amber light will be blinking slowly on the device.
On your Mac....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule
The utility will open up and take a minute to analyze the network, then display a window that looks like the screenshot below...except that you will see a Time Capsule on the screen.
Network Name......enter a simple name that you want to use as your wireless network name
Base Station Name....enter a simple name that you want to call the Time Capsule
Password.....enter a password that will be used for both the network and Time Capsule
Verify......verify the password
Cick Next
The utility will set up everything for you. When you see a green light on the Time Capsule, log on to the new wireless network that you have created and enter the password to connect.

New problem connecting Canon 20D camera to OS 10.4.7

Hi, I'm new to the forum but have foud you having looking for an answer to a problem i have had. re: New problem connecting Canon 20D camera to OS 10.4.3 and the answers listed for it the problem has been occuring on my 3 Macs, all running OS 10.4.7 and firmware on the new 20D at 2.0.3. The camera would not connect to the Mac with any software.
Canon told me to make sure that the connection mode is set to normal (which didn't work) but today they tell me to change it to P2P and iPhoto recognised the camera and downloaded. Still can't use the canon software (camera not connected / recognised) but they have said that a senior technition will be contacting me so i will keep you up to date.
All the best.

I have an update from my telephone conversation earlier today:
Dear Customer,
Thank you for your recent enquiry regarding your Canon product.
From the information supplied it would appear that the update in operating system is the cause of the problem. We can confirm that Canon are currently investigating compatibility with the recent update of the Apple Macintosh operating sytem OSX 10.4.7. If any software updates are neccessary they will become available from :
http://software.canon-europe.com/
I'll update with more.....

Do I need time capsule hardware to run time machine?

Do I need time capsule hardware to run time machine?
I have a Mac Mini and a non-Apple 2TB sitting on a wifi network at home. Can I run Time Machine to backup from Mac Mini to non-Apple 2TB drive?

Kappy wrote:
No. All you need is an external drive connected to the computer. But, Time Machine does not work on any NAS except the Time Capsule.
Not quite.. it will work on a NAS that has Time Machine Extensions.. many do.. the big brands.. Synology, QNAP, Netgear, etc.. and even some small one, I am using a cheapie made by zyxel works fine..
But some like buffalo have no updates to later versions of OSX.. Apple dramatically changed the way Lion handles AFP in network disks.. so plenty of companies had to release updates.
See this for setup info.
http://code.stephenmorley.org/articles/time-machine-on-a-network-drive/

New problem connecting time capsule to PC running windows 7

Similar Messages

Maybe you are looking for