New problem rating image in Survey View when multiple selected - help!

When we are in Survey View, normally we can have multiple images selected and when we use any star rating it rates only one image (the best), but midway through an editing session it just started rating all images selected at once. I know that this is the standard way that ratings operate in Library (Grid View), but never before has Survey View (N) done this. We rebooted and optimized the catalog, but nothing has helped. Please let me know if you have any fixed or thoughts as to what the problem would be.

You are welcome Kevin.
Another thing I find helpful when rating or labeling, is to engage the Caps Lock. When a rating or label is applied by hitting a number, LR automatically advances to the next image in the filmstrip. This works in all modules.

Similar Messages

ITunes freezes when I select help

iTunes freezes when I select help. Does the same thing in safe mode. Reinstall didn't help. iTunes 10.7.0.21. Windows 7 64 bit
When I choose iTunes help from the help menu, the help window opens with half of the window on screen and half of the window off of the screen to the right. The computer and other programs continue to work correctly but I need to use task manager to get iTunes to close.
Any thoughts???
Thanks, Tony

SUCCESS!
After trying all the suggestions above I googled the issue and came across a Windows specific forum where a guy had a software conflict with Malwarebytes.
That got me thinking about a startup item conflict.
Using Msconfig, I systemattically turned off half of my startup items, did a restart, tested the result.
In my case, with half of the items off, I could access the itunes store.
I turned on half of the remaining items, restarted, tested the result.
I could still access the store.
After about 8-10 cycles of this, I found that a startup item called OC_Guru_II was the culprit.
It is an overclocking utility that came with my Gigabyte brand Nvidia video card.
I'm confident that this was my problem. It is 100% repeatable.
Hope that it helps some of you when the other stuff doesn't.
All the best to everyone,
Tony

Posterized Image in the Viewer... Help?

I am new to Aperture and I have completed a couple of small projects using Aperture for post processing. I have noticed, however, that the images in the viewer are slightly posterized. Has anyone else experienced this effect. I am hooked to my 20" Cinema Display using my Powerbook 1.67ghz. However, after processing these files to Tiff the transitions are smooth.
If I use CaptureOne using the same Raw files the color transitions are quite smooth in it's viewer.
I know someone might say, "well if the final files are good then what is the worry?"... The problem is when the client is looking at the Images on Aperture. Not Good!
Is this a bug or have I pressed a button somewhere to turn on some kind of lower quality preview for the viewer?
Thanks for the help in advance.
- Rudy Torres

Check View>OnScreen Proofing - Turn this off, and thinks should look a little better.
Paul

Retrieve value form Table view when the selection mode is 'NONE'

Hi,
I am new to ABAP, Can anyone tell me how to reterieve the records of the tableview, i have the selection mode as 'NONE'. When the button is clicked i need to reterieve all the values from the table and display it in the next screen.
I am able to diaplay the table values , but i am unable to reterieve the values on Inputprocessing.
Its very urgent. Please help me
Regards,
Jose

you are able display the table view means, you have the data in internal table.
you need all the records that are displayed in the table view with out selection. why dont you use that internal table itself, which is displayed as table view.
vijay

Import of "image sequence" grays out when you select multiple jpg in Premier CC

It worked jus fine untill a few days ago after the CC update. I even reset the number sequencing on my camera to try a test set of picture. no matter what I do the "image sequence" check box grays out as soon as i click on multiple jpgs.
any one ever have this occur?

As joe bloe says, select only a single image file to enable the Image Sequence checkbox. Once you select multiple files, then the importer is set to import as multiple single still images. FYI, you can also select any file (other than the frst), if you wish to import a shorter range of files (eg: select 0040 to import an image sequence of frame 40 and on)

TS1424 the new skyfall by adele but no sound when you select play?

i purchased skyfall from i-tunes, paid $1.29 and when you select to play there is no sound, whats up

You might want to follow this thread: https://discussions.apple.com/message/19926439#19926439

File Dialog (Details View and Multiple Selections for View File Type)

I would like to use the generic windows dialog box found in the toolbar under:
File I/O/Advanced File Functions/File Dialog
What I would like to do is have multiple selections for the file type, for example one menu selection is *.txt, another is *.rtf, another is *.csv, etc. Listing a single type is straightforward.
Also does anyone know if there is a way to have the dialog open in the DETAILS view automatically?
Thanks for any help!
Carlton

Hi,
You can do it in following ways:
1. Write in pattern input the string "*.txt; *.csv; *.rtf". This will show to the user only files with this extensions in the dialog.
2. Another way is to create ring or menu where user could specify the extension. Depending on this extension you could wire the appropriate string to the pattern input of "File Dialog.vi"
I have made an example.
Good luck.
Oleg Chutko.
Attachments:
fileopen.vi ‏42 KB

Images can be viewed when inserting compact flash card but many just black when imported. What's up?

When I insert the compact flash card containing 158 images (Raw+jpeg Fine) into the Mac I can view all images, however after I import them only about half of them can be viewed. The remaining images are blacked out even though the info for each image is available. The card was reformatted prior to use. What do you think the problem might be?

Upload off the flash card to a folder on your Desktop (can be done with Image Capture) and see if they can be viewed with Preview. If the can launch iPhoto with the Option key held down and create a new, test library. Import the photos and test to see if the same problem persists.
Also make sure that the RAW files from your camera are supported by the operating system and iPhoto.
OT

Problem with image export to epub when I work with ID cs6 (update)

I creat a document and I select the page size as ipad，and later I export it into epub，put it my ipad（ibooks）
but the problem comes，the image size is not right in my ipad
for example，i set image width as 50%，and it looks good in adobe digital edition，it‘s 50% width.
but it's 100%(or some percent) in ipad(ibooks)
i delete the cs6 version and install cs5.5, recreat a document,the problem has gone.
but when i open the documnet with cs6,the problem comes again.
please fix the bug.Thanks a lot.
I‘ve found what’s wrong with cs6
in the xhtml file，cs6 describe the image as this
<img alt="A1.jpg" class="frame-1" src="../Images/A1_opt.jpeg" /> 
but in cs5.5，it‘s this
<img alt="A1.jpg" class="frame-1" src="../Images/A1_opt.jpeg" width="50%" />
so，we can find cs6 missed the style width="50%"
that’s why the image dose not be the size I've set when I see it in my ipad
It's a unforgiven mistake. so can anybody report to Adobe to fix it??!!
Message was edited by: zhanghami

Does your anti virus program filter spam or junk mail? does your mail provider? are these accounts IMAP or POP?

Background (wallpaper) images flicker into view when scrolling in FF

I think the above sentence about describes it all. Essentially, FF flickers on and off when I scroll. I have tried safe start mode with addons disabled, reset and I have uninstalled and reinstalled. I have a Windows 7 OS and a new hard drive that I just installed. This problem began with the new hard drive.

Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

Problem with image in Hierarchy Viewer component

Hi All,
I am using Hierarchy Viewer component in my application developed in Jdeveloper 11.1.1.6.0
Actually, my requirement is to pick the name of the "content id" stored as a value in a field in the table. Hence written code as follows, which is not showing the image.
<af:image id="img3"
inlineStyle="border-color:Black; border-width:1px; width:85px;height:120px;"
source="#{documentsService.latestReleasedVersionURL['UUCM#dDocName:#{node.EmpImage}']}"
rendered="true"/>
Please help me out ....
Thanks & Regards
Sneha
Edited by: 1002482 on Jun 6, 2013 12:46 AM
Edited by: 1002482 on Jun 6, 2013 12:48 AM

Timo,
It is supposed to pick up the image from the content server and display on the page.
I have tried the following, it worked.
1) Checked in the image in the content server with content id : SAMPLE_IMG
2) modified the code as
<af:image id="img3"
inlineStyle="border-color:Black; border-width:1px; width:85px;height:120px;"
source="#{documentsService.latestReleasedVersionURL['UUCM#dDocName:SAMPLE_IMG']}"
rendered="true"/>
Now that, I want to store the value "SAMPLE_IMG" in a field in a table, and want my application to pick up that value.
Sneha

Using images in library view when file is missing

I have some images in the library but the file is missing. Can I somehow use the image displayed in the library view and export to disk for printing or e-mail? I’m using v4 on a Mac. Thanks.
Following on from the above I have downloaded the Extract previws help guide. http://helpx.adobe.com/lightroom/kb/extract-previews-lightroom-4.htmlThis runs a script to enable extracts to be made. After a bit of messing about with the process for choosing where to house the extracted files this works perfectly. It has certainly saved me a lot of pain and heartache.
Message was edited by: David Osmond
Message was edited by: David Osmond. Now closed.

Check whether the machine at school has correctly been updated to A§ 8.0.2. Several not so minor bugs were fixed with the updates. also check your files on Illustrator (Mac) and if necessary, re-save them from there.
Mylenium

Survey view organization problem, cannot organize images in order I want without images shifting randomly

I want to be able to organize my images in survey view in lightroom 2 in the order I want them to be. this way I can export them in the order the portfolio reviewer will see them in. when I have 20 images in survey view and I try to rearrange them, they scatter about on their own? help

Survey mode is not designed for rearranging photos into a User-specified order. You will need to use the Grid View [G] for this.

Lightroom 5 - Bug in Survey view?

Hi all,
Sorry if this isn't the right place for this, it's the first time I've used these forums and I couldn't find anywhere else to submit a bug report.
I've recently started using Lightroom and have started with Lightroom 5. I've found that sometimes when switching between Loupe view and Survey view the images in Survey view are different sizes or in the wrong place:
I think it's after something has happened which will remove an image from the current selection while in Loupe view, on returning to Survey view not all images have been re-sized and re-positioned. It only seems to happen if Lightroom is trying to catch up after a lot of activity.
So the sequence I used to cause the second image was to go from Survey view to Loupe view using the E key shortcut, navigate between various images in the selection with the cursor keys (I did this quite quickly, so Lightroom was slightly delayed in its responses), press X to reject one of the images, which caused the image to no longer match my filter, then quickly after press N to return to Survey view. Doing anything which would cause a refresh of the images, such as contracting and expanding the section on the right, causes the images to sort themselves out.
I'm using Lightroom 5.0 on Windows 7, let me know if you need any more details.
Thanks,
Andy

I haven't seen this in GRID view but there is a problem with phantom images being selected in Compare View and after leaving Compare View. This is another of many LONGSTANDING bugs still not fixed in LR5.3. This was reported almost a year ago. This is a SEVERE bug as you can accidentally delete or change images after using compare as images are selected that you don't know about.
A couple threads
http://forums.adobe.com/message/5835956#5835956
http://forums.adobe.com/message/5564937#5564937
http://forums.adobe.com/message/5805625#5805626
http://forums.adobe.com/message/5465076#5465076
As you can see in this clip, no photos are selected in the film strip, one photo is selected in the main window and the info line says there are two photos selected. If you switch to GRID it will show no photos selected but if you do a remove photo command, two photos will be removed. Severe bug as far as I am concerned.

Add photos to a specific Collection from Survey view?

When I'm doing my edit from a shoot, I often use the Survey view to look at groups of images. Also, I use collections as a way to store selections into future use categories like Contests 2010, Portfolio, etc. In Survey, it seems only possible to add photos to a Quick Collection or view it in an existing collection, but I want to be able to add it to other collections either via drag & drop or by contextual menu. Is this possible to do this and if not, is this something other users find useful enough to add as a feature request?

I think the drag and drop would be difficult to implement as all the images in Survey View have to be targeted.
However, if one had the ability to set more than one target collection rather than a single collection or the Quick Collection I think that could be useful for organizing while in Survey View. Just as we can change the meaning of the color labels we could be able to select say, five different collections and assign a target shortcut to them. So whie in survey view (or any view for that matter) I could hit 22 and the image)s) would be added to any collection I deemed to have a target of 22. Add the shift key so as not to confuse with Ratings.
Currently I cannot suggest a simpler way for you since you state that you are in Survey View. A feature request? Sure go ahead and make one.

New problem rating image in Survey View when multiple selected - help!

Similar Messages

Maybe you are looking for