New Problem w/updated iPod software and Alpine Integration (4th Gen)
I have been happily using my 4th gen iPod with my Alpine head unit and Alpine iPod adapter.
A few weeks ago, I updated my iPod software to the latest version. Now the iPod sometimes behaves strangley. I encounter the following problems:
1) Sometimes when I turn the car off, the iPod now won't automatically go into pause and then turn off. It will just keep running with the car off and ultimately wear down the battery.
2) Sometimes the iPod does go into pause mode and turn off when I turn the car off, but then it won't wake from its slumber. The only way to get it working again is to perform a reset.
These problems seem most persistent when listening to Podcasts. Although I have not yet narrowed it down to exactly that. Also, I do not get problem #2 when the iPod is NOT connected to the Alpine unit.
Any help of info would be appreciated. I am not sure it's the new iPod software, but that's the only thing that has changed and it's been working perfectly up until now.
PS: I have done the 5 R's.
Anyone?
Similar Messages
-
Updated iPod software, and noe I have a "not enough free space" warning...
Sooooooo...
Last night iTunes prompted me that I needed to updated my 4gb nano (2nd G), and after the software loaded, i got an error message about the file being corrupt. After that point, I can load playlists onto it, but it will not load songs checked in "My Library" that are not on playlists. I even went so far to uncheck everything but one song, and it still says "not enough free space"...I tried 4 restores, went through windows explorer and deleted to update file so it could be reinstalled, and still I got nothing...what am i missing??? I also need to mention that I did not add any music before or after the software update, and I was just a little over half full on the meter..I have pooped around with this for 5 hours, and I am utterly stumpped. My iPod is starting to look like a football on a tee if you know what I mean...
HP Pavilion mx50 Windows XPHave you seen these?:
iTunes Displays a Corrupt File Message
Very Good Corrupt File Thread
I hope this helps! -
TS3694 Updating ipod software and received this error message. "An unknown error occurred (-1)."
I have tried troubleshooting it with apple help and it is not working. Any suggestions? I am unable to use the ipod at the point and cannot download any apps as well.
Did y try on another computer
Also see:
-1 error
-1 error too
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1
-
I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now. I know this is not normal. What can I do? It synced just fine, but has been stuck on "updating ipod software" for 3 hours now!
She has had it for about 6 months and this is the first time we have plugged it into the computer since then. I can not exit out of itunes either.If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty
-
I am having iPod classic 120GB Serial Number:8K913VF:2C7
I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users. -
My iPod updated by itself without a wifi connection. It told me to connect it to iTunes so I did and I updated the software and everything. After it was updated, my wifi button was greyed out and I don't know why. I sent it in to get fixed and the Apple store did NOTHING. I still have about 48 days left on my one year waranty and I don't know what to do to fix the problem. Please, does anyone know how to fix this issue without selling it or replacing it? I've tried all the troubleshooting techniques and nothing is working. Someone help.
Here:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
An appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
i have a ipod touch 2g and after a restore none of my apps will restore because it says that i need a newer version of the ipod software to run them they all work fine till i did the restore . is there any way to get them back ?
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews -
trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images say "preview cannot be seen" and some don't. And when I try to import and I hit "new photos" it's all the photos on my card. My brain is about to explode.
It said something similar where the thumbnails were supposed to be.
Just got the newest edition of LR, 4.4
4.4 is not the newest edition of LR
We don't want to know that it said "something similar", we want to know the exact wording. In fact, you ought to state the exact problem you are having, in detail, instead of saying you are having the same problem. -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
I recently upgraded my Itunes softeware, now itunes will not recognize my IPod Classic. If I delete the current IPod software and reinstall it, would this solve the problem, and if so, I'll need step by step instruction.
Yep.
Take a look here:
http://www.snsforums.com/index.php?showtopic=235
It appears that SANmp is indeed the most likely source of your problem. -
?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.
Error 1402 | Error 1406 | Acrobat, Reader
-
sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?
you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC -
Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !
recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios. -
Possible fix for "problem downloading the IPOD software.." error
I have a click wheel IPOD and after dropping it was forced to restore to factory setting. When attempting to restore, Itunes nor my computer recognized my IPOD and when it finally did I got the message
"These was a problem downloading the Ipod software for the Ipod "Ipod." The requested resource was not found."
I did the 5 steps repeatedly over 2 days with no luck then today I combined advice from a bunch of postings and it worked!
Here's what worked:
1)Bought a new USB 2.0 connect cable.
2)Deleted the folder containing the firmware files: see
http://docs.info.apple.com/article.html?artnum=304309
3)Delete Ipod updater
4)Restarted computer
5)Download updated Itunes
http://www.apple.com/ipod/start/
When I ran the exe file it asked if I wanted to "repair" or "reinstall" I choose "repair".
5)Reset ipod
6)Opened itunes, connected ipod, it took about 10 minutes for itunes to sync with the ipod.
7)Choose restore.
After that it went as normal.
Cheers
Dell Inspiron Windows XPIs this any helps?
http://docs.info.apple.com/article.html?artnum=304309
Maybe you are looking for
-
Post Author: jigmewangchuk CA Forum: Crystal Reports I am totally new to ASP.NET and I have developed a web application in VS2005 (VB) and Crystal report 10. I am getting an error u201CReport Load Failedu201D when I run report from main page linked
-
Order of execution at start of dasylab wks (var/str)
what is order of execution in Dasylab when you start a wks for: "read from .ini" , "enter at start of experiment" , action "at start of experiment". especially concerning values of vars/strings. Are any modules, including actions 'at start of experim
-
Need to Modify attribute REQ_LINES_FWK_RN in item type REQAPPRV
Hi Team I have a requirement to modify/add info to a requisition approval email. The WF message refers only to attribute REQ_LINES_FWK_RN in the body tab. REQ_LINES_FWK_RN is of type document. Can somebody please direct me as to how I can make modifi
-
Making an auto-login on our Intranet; how secure is CGI.auth_user?
We have CF10 on our Intranet webserver, and I'm developing the authentication system. The higher ups do not want the Intranet to ask for a login, and instead to pull the user's credentials from the CGI.auth_user variable since they log into a domain
-
Ddi_regs_map_setup rnumber parameter
Can anyone expand on the explanation of rnumber in the man page for ddi_regs_map_setup ? I am confused about what value I need to supply. What is the register address space set it refers to? rnumber Index number to the register address space set.