New problem with camera and imovie 08
i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?
Hi
Test another FW-Cable.
Test Your Camera on another Mac so that DV-in still works OK
Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
What Camcorder ?
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Free space on internal (start-up) hard disk ? (Others don't count)
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W
Similar Messages
-
Problems with camera and photos
Hi so I just got the new iphone 5s and every time I try opening up my pictures or just using the camera, it quickly returns to the home screen. How do I fix this?
Hi alecefriedman
If you are having issues with the camera and photos on your iPhone, you may find the Camera portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
OS X Mavericks problem with iphoto and imovie
Hi,
I having problem with my iphoto and imovie after installing 10.9. When i go to Appstore and ask me to recomfirm but there's nothing happen..why? kindly help me.If you purchased the apps from the Mac App Store, log into the Mac App Store, go to Purchases and redownload them. If you didn't and you have the CD/DVD of iLife you can reinstall the apps from there.
If you have a Time Machine backup or clone of your previous OS X install, you can use the Migration Assistant to copy over your apps. -
Problems with camera and photo booth
My camera shutter will not open, and in photo booth, the red drape repeatedly closes. I have closed the apps and also reset my iPad, but nothing works. Do I need to bring it to Apple?
Jambagroov-
I have not tried it, but found an article that explains how to sync your iPad to a new computer: <How to Sync an iPad With a New Computer - eHow.com>. I know you can lose your data if you do not do it right!
Another article is at: <How to Sync an iPhone, iPad or iPod Touch with a new computer>.
Someone else may have a better reference, perhaps from Apple.
Fred -
New Computer = New Problems with iTunes and iPod Classic
I recently got a new computer. I was successfully able to transfer the iTunes music files from the old machine to the new. However, I had to reload my iPod from scratch. My problems are:
-- songs from playslists that aren't checked to be loaded are loading into my iPod (my son's music).
-- I'm getting multiple messages to authorize the computer for it to load purchased music (I have authorized it in the past). I get an error message when I try to authorize the computer (-44084).
--If I uncheck a play list or song, will it be removed from my iPod next time I sync? If not, how do I "erase" songs from my iPod that I dont' want anymore?I'm getting multiple messages to authorize the computer for it to load purchased music (I have authorized it in the past). I get an error message when I try to authorize the computer (-44084).
With that one, I'd try the following document:
[iTunes repeatedly prompts to authorize computer to play iTunes Store purchases|http://support.apple.com/kb/TS1389]
(Probably best to start with the user account control section with a 44084.) -
Creating a QuickTime movie with the new Canon T5i camera in iMovie 9.0.9.
Help needed creating a QuickTime movie with the new Canon T5i camera in iMovie 9.0.9. The project is done and looks good...I need help understanding what settings need to be set so I can make a QuickTime movie in the highest quality that would fit the ratio of 16.9 to be sent out to my YouTube page. I played around with some of the settings and have not come with the right setting for the video. I want the highest quality with the lowest amount of megabytes…thanks
I would suggest using SHARE/EXPORT MOVIE and choose 1920x1080 (if your source material supports this).
That should work well in YouTube.
If you want to go further with custom QuickTime settings, here are some that should work, but in my experience, it will be no better than using SHARE/EXPORT MOVIE.
follow the instructions below to create a .mov video that will work on YouTube:
In iMovie, select Share > Export Using QuickTime
Next, you may want to check your Options to verify that the following settings are correct:Video settings
Compression Type: H.264
Frame Rate: 30 is preferred. 23.98, 24, 25, 29.97 are also acceptable.
Data Rate: Automatic
Key Frames: Automatic
Frame Reordering: Unchecked
Audio/Sound settings
Format: AAC
Click Show advanced settings and choose Constant Bit Rate as encoding strategy
Other settings
Size: Choose the original size of the video
“Prepare for Internet Streaming”: Fast Start -
Problem with Facetime and my MacBookPro camera
Hello,
I've got a MacBookPro and I have a problem with Facetime and my front camera.
When I have a discussion with an iMac or an other MacBook the image received by the other person becomes fix.
To unfix it I have to put my finger on my camera and then everything is good until the next time, 4 to 10 seconds later I've got the problem again.
Perhaps somebody can help me.
My head on my screen is always good even when the bug appear on my correspondent's screen.
For information, the 2 mac have the same iOS version (OSX Lion) and Facetime version.Hi Dave,
Edit: Well, I guess I was lost when I posted this. My answer was regarding a problem with OS X, not iOS. I'm going to leave the answer here in case someone else with a Facetime for Mac issue can benefit, because when you're searching for "Facetime AND Login", you could land in any discussion area. -Jerry
Keychain Access.app is in your Utilities folder in your Applications folder.
The path will be: Macintosh HD > Applications > Utilities > Keychain Access.app.
Keychain is where all your passwords are stored for those applications that you don't want to have to manually log into all the time.
It's a handy app to become familiar with, for instance if you want to look up a password or user name from the past.
Hope this helps you.
Jerry -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
JerryThanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry -
Problems with SwingWorker and classes in my new job, ;), can you help me?
Hi all, ;)
First of all, sorry about my poor English.
I have a problem with Swing and Threads, I hope you help me (because I'm in the firsts two weeks in my new job)
I have two classes:
Form1: Its a JPanel class with JProgressBar and JLabel inside.
FormularioApplet: (the main) Its a JPanel class with a form1 inside.
I have to download a file from a server and show the progress of the download in the JProgressBar. To make it I do this:
In Form1 I make a Thread that update the progress bar and gets the fole from the server.
In FormularioApplet (the main) I call to the method getDownloadedFile from Form1 to get the File.
THE PROBLEM:
The execution of FormularioApplet finishes before the Thread of Form1 (with download the file) download the file. Then, when I call in FormularioApplet the variable with the file an Exception: Exception in thread "AWT-EventQueue-1" java.lang.NullPointerException is generated.
First main begins his execution, then call to Form1 (a thread) then continues his execution and when the execution is finished ends the execution os Form1 and his thread.
How can I do for main class call the function and the Thread download his file after main class assign the file of return method?
How can I pass information froma class include an a main class. Form1 can't send to main (because main class made a Form1 f1 = new Form1()) any information from his end of the execution. I think if Form1 can say to main class that he finishes is job, then main class can gets the file.
I put in bold the important lines.
Note: My level of JAVA, you can see, is not elevated.
THANKS A LOT
Form1 class:
package es.cambrabcn.signer.gui;
import java.awt.HeadlessException;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
public class Form1 extends javax.swing.JPanel {
//Variables relacionadas con la clase original DownloadProgressBar
private InputStream file;
private int totalCicles;
private int totalFiles;
private int currentProgress;
private SwingWorker worker;
private ByteArrayOutputStream byteArray;
private boolean done;
/** Creates new form prueba */
public Form1() {
initComponents();
this.byteArray = new ByteArrayOutputStream();
progressBar.setStringPainted(true);
//this.totalFiles = totalFiles;
currentProgress = 0;
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
label1 = new javax.swing.JLabel();
progressBar = new javax.swing.JProgressBar();
statusLabel = new javax.swing.JLabel();
setBackground(new java.awt.Color(255, 255, 255));
setMaximumSize(new java.awt.Dimension(300, 150));
setMinimumSize(new java.awt.Dimension(300, 150));
setPreferredSize(new java.awt.Dimension(300, 150));
label1.setFont(new java.awt.Font("Arial", 1, 18));
label1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label1.setText("Barra de progreso");
statusLabel.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
statusLabel.setText("Cargando");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(this);
this.setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, statusLabel, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, progressBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, label1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(label1)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(progressBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(statusLabel)
.addContainerGap(73, Short.MAX_VALUE))
}// </editor-fold>
// Declaraci�n de variables - no modificar
private javax.swing.JLabel label1;
private javax.swing.JProgressBar progressBar;
private javax.swing.JLabel statusLabel;
// Fin de declaraci�n de variables
public byte[] getDownloadedFile(String documentToSign){
//Variables locales
byte puente[] = null;
try{
//Leemos el documento a firmar
StringTokenizer st = new StringTokenizer(documentToSign, ";");
Vector<URL> fileURL = new Vector<URL>();
HttpSender sender = new HttpSender(null);
//Introducimos la lista de URLs de archivos a bajar en el objeto Vector
for(; st.hasMoreTokens(); fileURL.add(new URL(st.nextToken())));
//Para cada URL descargaremos un archivo
for(int i = 0; i < fileURL.size(); i++) {
file = sender.getMethod((URL)fileURL.get(i));
if(file == null) {
Thread.sleep(1000L);
throw new RuntimeException("Error descarregant el document a signar.");
System.out.println("Form1 Dentro de getDownloadFile, Antes de startDownload()");
//Fijamos el valor del n�mero de ciclos que se har�n seg�n el tama�o del fichero
this.totalCicles = sender.returnCurrentContentLength() / 1024;
this.progressBar.setMaximum(totalCicles);
//Modificamos el texto del JLabel seg�n el n�mero de fichero que estemos descargando
this.statusLabel.setText((new StringBuilder("Descarregant document ")).append(i + 1).append(" de ").append(fileURL.size()).toString());
statusLabel.setAlignmentX(0.5F);
*//Iniciamos la descarga del fichero, este m�todo llama internamente a un Thread*
*this.startDownload();*
*System.out.println("Form1 Dentro de getDownloadFile, Despu�s de startDownload()");*
*//if (pane.showProgressDialog() == -1) {*
*while (!this.isDone()){*
*System.out.println("No est� acabada la descarga");*
*if (this.isDone()){*
*System.out.println("Thread ACABADO --> Enviamos a puente el archivo");*
*puente = this.byteArray.toByteArray();*
*System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);*
*else{*
*Thread.sleep(5000L);*
*// throw new RuntimeException("Proc�s de desc�rrega del document a signar cancel�lat.");*
catch (HeadlessException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("UI: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (MalformedURLException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (HttpSenderException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (InterruptedException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
//System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);
return puente;
public void updateStatus(final int i){
Runnable doSetProgressBarValue = new Runnable() {
public void run() {
progressBar.setValue(i);
SwingUtilities.invokeLater(doSetProgressBarValue);
public void startDownload() {
System.out.println("Form1 Inicio startDownload()");
System.out.println("Form1 Dentro de startDownload, antes de definir la subclase SwingWorker");
System.out.println(done);
worker = new SwingWorker() {
public Object construct() {
System.out.println("Form1 Dentro de startDownload, dentro de construct(), Antes de entrar en doWork()");
return doWork();
public void finished() {
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Antes de asignar done = true");
System.out.println(done);
done = true;
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Despu�s de asignar done = true");
System.out.println(done);
statusLabel.setText("Completado, tama�o del archivo: " + (byteArray.size() / 1024) + "KB");
System.out.println("Form1 Dentro de startDownload, antes de worker.start()");
worker.start();
System.out.println("Form1 Dentro de startDownload, antes de salir de startDownload");
System.out.println(done);
System.out.println("Form1 Dentro de startDownload, despu�s de worker.start()");
* M�todo doWork()
* Este m�todo descarga por partes el archivo que es necesario descargar, adem�s de actualizar
* la barra de carga del proceso de carga de la GUI.
public Object doWork() {
System.out.println("Form1 doWork() this.byteArray.size(): " + this.byteArray.size());
try {
byte buffer[] = new byte[1024];
for(int c = 0; (c = this.file.read(buffer)) > 0;) {
this.currentProgress++;
updateStatus(this.currentProgress);
this.byteArray.write(buffer, 0, c);
this.byteArray.flush();
this.file.close();
this.currentProgress = totalCicles;
updateStatus(this.currentProgress);
} catch(IOException e) {
e.printStackTrace();
System.out.println("Form1 doWork() FINAL this.byteArray.size(): " + this.byteArray.size());
//done = true;
System.out.println("AHORA DONE = TRUE");
return "Done";
public boolean isDone() {
return this.done;
FormularioApplet class (main)
package es.cambrabcn.signer.gui;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.security.Security;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
import netscape.javascript.JSObject;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import sun.security.provider.Sun;
import be.cardon.cryptoapi.provider.CryptoAPIProvider;
public class FormularioApplet extends java.applet.Applet {
//Variables globales
int paso = 0;
private static final String JS_ONLOAD = "onLoad";
private static final String JS_ONLOADERROR = "onLoadError";
private static final int SIGNATURE_PDF = 1;
private static final int SIGNATURE_XML = 2;
//private String signButtonValue;
private int signatureType;
private String documentToSign;
private String pdfSignatureField;
private Vector<String> outputFilename;
private Color appletBackground = new Color(255, 255, 255);
private Vector<byte[]> ftbsigned;
* Initializes the applet FormularioApplet
public void init(){
try {
SwingUtilities.invokeLater(new Runnable() {
//SwingUtilities.invokeAndWait(new Runnable() {
//java.awt.EventQueue.invokeAndWait(new Runnable() {
public void run() {
try{
readParameters();
initComponents();
catch(FileNotFoundException e){
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch(IOException e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (Exception e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
javascript(JS_ONLOAD, null);
/** This method is called from within the init() method to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
this.setSize(350, 450);
appletPanel = new javax.swing.JPanel();
jPanel1 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JLabel();
jPanel2 = new javax.swing.JPanel();
label = new javax.swing.JLabel();
jPanel3 = new javax.swing.JPanel();
jButton1 = new javax.swing.JButton();
jButton2 = new javax.swing.JButton();
setLayout(new java.awt.BorderLayout());
appletPanel.setBackground(new java.awt.Color(255, 255, 255));
appletPanel.setMaximumSize(new java.awt.Dimension(350, 430));
appletPanel.setMinimumSize(new java.awt.Dimension(350, 430));
appletPanel.setPreferredSize(new java.awt.Dimension(350, 430));
jPanel1.setBackground(new java.awt.Color(255, 255, 255));
jPanel1.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
jTextField1.setFont(new java.awt.Font("Arial", 1, 18));
jTextField1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
jTextField1.setText("SIGNATURA ELECTRONICA");
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 24, Short.MAX_VALUE)
.addContainerGap())
jPanel2.setBackground(new java.awt.Color(255, 255, 255));
jPanel2.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
label.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label.setIcon(new javax.swing.ImageIcon("C:\\java\\workspaces\\cambrabcn\\firmasElectronicas\\logo.gif"));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label)
.addContainerGap(229, Short.MAX_VALUE))
jPanel3.setBackground(new java.awt.Color(255, 255, 255));
jPanel3.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
//this.jButton1.setVisible(false);
//this.jButton2.setVisible(false);
jButton1.setText("Seg\u00fcent");
jButton1.setAlignmentX(0.5F);
//Cargamos el primer formulario en el JPanel2
loadFirstForm();
//Modificamos el texto del bot�n y el contador de pasos.
//this.jButton1.setText("Siguiente");
//this.jButton1.setVisible(true);
//this.jButton2.setVisible(true);
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
jButton2.setText("Cancel\u00b7lar");
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton2ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
jPanel3.setLayout(jPanel3Layout);
jPanel3Layout.setHorizontalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 94, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 112, Short.MAX_VALUE)
.add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 102, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
jPanel3Layout.setVerticalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jButton2)
.add(jButton1))
.addContainerGap())
org.jdesktop.layout.GroupLayout appletPanelLayout = new org.jdesktop.layout.GroupLayout(appletPanel);
appletPanel.setLayout(appletPanelLayout);
appletPanelLayout.setHorizontalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
.addContainerGap())
appletPanelLayout.setVerticalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
add(appletPanel, java.awt.BorderLayout.CENTER);
}// </editor-fold>
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
this.destroy();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
changeForms(this.paso);
// Declaraci�n de variables - no modificar
private javax.swing.JPanel appletPanel;
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton2;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPanel jPanel3;
private javax.swing.JLabel jTextField1;
private javax.swing.JLabel label;
// Fin de declaraci�n de variables
* M�todo readParameters
* M�todo que inicializa los valores de los par�metros internos, recibidos por par�metro.
private void readParameters() throws FileNotFoundException, IOException {
???????????????? deleted for the forum
addSecurityProviders();
* M�tode loadFirstForm
* Aquest m�tode carrega a jPanel2 el formulari que informa sobre la c�rrega dels arxius
private void loadFirstForm(){
//Form1 f1 = new Form1(stream, i + 1, fileURL.size(), sender.returnCurrentContentLength(), appletBackground);
//Form1 f1 = new Form1(fileURL.size(), sender.returnCurrentContentLength());
Form1 f1 = new Form1();
//Lo dimensionamos y posicionamos
f1.setSize(310, 150);
f1.setLocation(10, 110);
//A�adimos el formulario al JPanel que lo contendr�
this.jPanel2.add(f1);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Descarreguem l'arxiu a signar
*System.out.println("FormularioApplet Dentro de loadFirstForm(), antes de llamar a getDownloadFile()");*
*byte obj[] = f1.getDownloadedFile(this.documentToSign);*
if (obj == null){
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) es NULL");
else{
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) NO es NULL");
System.out.println("obj: " + obj.length);
this.ftbsigned.add(obj);
System.out.println("FormularioApplet Dentro de loadFirstForm(), despu�s de llamar a getDownloadFile()");
//Indicamos que el primer paso ya se ha efectuado
this.paso++;
* M�tode changeForms
* Aquest m�tode carrega a jPanel2 un formulari concret segons el valor de la variable global "paso"
private void changeForms(int paso){
/*A cada paso se cargar� en el JPanel y formulario diferente
* Paso previo: Se realiza en la inicializaci�n, carga el formulario, descarga el archivo y muestra la barra de carga.
* Case 1: Se carga el formulario de selecci�n de tipo de firma.
* Case 2: Se carga el formulario de datos de la persona que firma.
this.paso = paso;
switch(paso){
case 1:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form2 f2 = new Form2();
//Lo dimensionamos y posicionamos
f2.setSize(310, 185);
f2.setLocation(10, 110);
//Quitamos el formulario 1 y a�adimos el formulario 2 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f2);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el contador de pasos.
this.paso++;
break;
case 2:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form3 f3 = new Form3();
//Lo dimensionamos y posicionamos
f3.setSize(310, 175);
f3.setLocation(15, 130);
//Quitamos el formulario 1 y a�adimos el formulario 3 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f3);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el texto del bot�n y el contador de pasos.
this.jButton1.setText("Finalizar");
this.paso++;
break;
default:
//Finalizar el Applet
//C�digo que se encargue de guardar el archivo en el disco duro del usuario
break;
private void addSecurityProviders() throws FileNotFoundException, IOException {
Security.addProvider(new CryptoAPIProvider());
if (signatureType == SIGNATURE_PDF) {
Security.addProvider(new BouncyCastleProvider());
else {
Security.addProvider(new Sun());
private File createOutputFile(String filename, int index) {
return new File((String)outputFilename.get(index));
protected Object javascript(String function, String args[]) throws RuntimeException {
//Remove
if (true) return null;
try {
Vector<String> list = new Vector<String>();
if(args != null) {
for(int i = 0; i < args.length; i++) {
list.addElement(args);
if(list.size() > 0) {
Object objs[] = new Object[list.size()];
list.copyInto(objs);
return JSObject.getWindow(this).call(function, objs);
} catch(UnsatisfiedLinkError e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
} catch(Throwable e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
return JSObject.getWindow(this).call(function, new Object[0]);
Edited by: Kefalegereta on Oct 31, 2007 3:54 AM
Edited by: Kefalegereta on Oct 31, 2007 4:00 AMLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
I have the old ipod touch(without camera) and I received the new one (with camera) as a gift. How do I transfer everything from old one to new one?
Make one final USB sync with the old iPod. The sync includes a backup. Then connect the new iPod to the same computer/iTunes library and restore from the backup of the old iPOd. All the synced media like apps and music have to be in the iTunes library since synced media is not included in the backup that iTunes makes. For how to restore see:
iTunes: Backing up, updating, and restoring iOS software -
PSE 10 from Apple Store problem with camera raw 6.7 upgrade
PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?
Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Potential Problems with Airplay and Mountain Lion
Hey Everyone,
I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
Hope this helps.
- Kaytie WaltersThe VPN log looks like:
1 13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2 13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3 13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4 13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5 13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6 13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7 13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8 13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9 13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512) -
Problems with answering and making calls
I have owned a Droid 2 for almost a year now. I love it! But for the last few months I have had a problem with answering and making calls. Sometimes when I answer a phone call it connects like I have answered the call but I can't hear anything and the other person can't hear me. The call says I am connected and I can see the timer going but there is no communication. It does the same thing when I go to make calls sometimes. I can hit send and it connects the call but I can't hear anything. The timer is going and the other person answers but I can't hear anything. The only reason I know they answered is because they then call me back and leave a voicemail, sounding very confused. I have to restart my phone and then the problem is solved. But only for a little bit. I haven't been able to pick out a pattern or anything. It is random and very frustrating. I went into my local Verizon store about the issue and they arranged for me to receive a new, certified pre-owned phone because I pay insurance on my phone. I received the phone the next day and everything went great, for a few days. But this phone is also having the same problem. I am getting very frustrated with this because I need to be able to actually talk to people when they call me. Anyone else having the same problem? I want to go back to the store but I feel like they wouldn't do anything more than they did last time, which didn't solve the problem.
I have this same issue on a bi-daily basis: I can place a call, but then I hear nothing. I can answer a call, but I then hear nothing. The calls connect as the people I am in contact with will tell me they answered my calls and heard me, though I could not hear them - and vice versa. Also, this phone does not like to place a call using the "call" option if dialing from "recent calls". I turn this phone on/ off daily, I've taken the battery out on about 50% of the occassions when this issue has happened. This has been a problem for me for approximately 1yr. My early renew date is just shy of 2 months from now and I cannot wait to get rid of this phone. Aside from having great difficulty making/ receiving calls, the phone is overall slow to respond to basic functions like text messaging or using the camera. Also, most times while taking a picture, the camera will "take a picture" but then there is no image in the file. Highly annoying - the only way to temporarily fix this is to reboot - but like the call issue, the problem recurs. I do have a bunch of apps on installed on the phone, but since I also have an APP killer on the phone, nothing aside from "Weather Bug" app is ever really running in the background that would slow this phone. BUT, right now my main concern is may safety: God forbid I am ever in danger or in an emergency situation, this phone's constant malfunctioning could possibly be the physical harm or death of me. I hope that my family can sue the company that provides the software for this phone, Verizon & Motorola in the event of my untimely death.
Maybe you are looking for
-
How do I recover missing icons from my Safari menu?
Can anyone advise as to how to recover some missing toolbar icons I placed in my Safari menu at the top of my screen/above the bookmarks bar? Specifically, when I clicked on the toolbar icon for "downloads", that used to be there, it just disappeared
-
Dear Experts Please let me know how can to cinfigure scheduler on query reports in 8.81? Thanks in Advance Regards Kanishka Tyagi
-
App-V deployment - view in browser
When deploying via App-V, how do we enable browser integration so the PDF opens within the browser window? Specifically for MIME types with no extension I have the AppV MSI, but not sure if I install that before sequencing, during or on the client m
-
Flex SDK downloads page broken
Hey ninjas, It looks like some image rendering library is borking the SDK downloads page and I could really, really, really use that latest build right now... Hunched over the keyboard hitting refresh, Dylan
-
I recently upgraded to an 8800 from a 7290 (actually I bought an unlocked one on eBay) but no matter what I try, the PC won't recognize the BB. When I connect the two using USB, the BB's charging icon flashes on and off intermittently, each time gene