New problem with MediaSource please h

For some reason Creative MediaSource Organize cant detect my MicroPhoto. WM0 and Zen MicroPhoto Media Explore both detect it but Creative MediaSource Organize it doesnt show up. I have Enable Detector check( its set at default). It was finding it before and I havent changed any setttings
Any idea how to fix this probelm.
This **bleep** program is really pissing me off.

Edit: I have it working now. I had "What u Hear" selected. When I changed it to Microphone and went to Ventrilo setting and changed the setting to Microphone. It worked. Thanks.

Similar Messages

Two new problems with the Quicktime Plug-in

I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
There is just nothing on the spot where the embedded Quicktime player should be.
Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
to the Quicktime Plug-in.
Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
I think these might be the problems with the new Quicktime Plug-in 7.7.1.
Please check about these problems and solve them on the next version of the Quicktime Plug-in.
I will give you a couple of hyperlinks so that you can check about the problems directly.
http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
http://blog.daum.net/wellabc/15434322
↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
p.s: I am sorry that I am Korean.

I recommend that you repeat all this via
http://www.apple.com/feedback/quicktime.html
to make sure that Apple will see it.

New problem with my Sony xperia t2 ultra dual

I have recently discovered this new problem with my Sony xperia t2 ultra dual.it displays" sorry but xperia home is not wotking". And if iclick on OK it displays the same message again.
Can anyone help me solve this problem?
Please reply quickly what to do?

Repair the phone with PCC PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

New problems with Acrobat 11.03 for Mac

I'm having new problems with my Adobe Acrobat 11.03 for Mac. These issues are relatively new and did not occur when I first bought the product about 9 months ago.
1) When scanning documents from an HP scanner into Adobe on my Mac, the scanning works fine, but a multi-page document (scanned as one) is saved as a separate PDF for each page. Bothersome to then have to combine all those separate files into one doc. I can do it, just don't think I should have to take the time.
2) Occasionally, when working in Adobe, the menu bar at the top will disappear when I click on the Adobe icon or a previously saved PDF. Very frustrating. Can't make a note or save the document without knowing the shortcuts, as the menu has disappeared. Once I click somewhere outside Adobe, the menu bar reappears for the other programs. This happens over and over.
Any ideas?
Thanks.

Hey JeffSPHR,
Please refer this KB doc link mentioned below and try troubleshooting scanner issues:
Troubleshoot scanning problems | Mac OS
Let me know if this helps.
Regards,
Anubha

Lenovo S205 & Windows 7 64bit. Problems with graphics, please help

Hi,
I recently bought a Lenovo s205:
AMD E-350
It came with 1GB but I upgraded it to 4Gb RAM (1333 running at 1066)
Windows 7 64 Ultimate.
I have tried also Windows 7 32 (Professional, ultimate) and all versions give me the same problem, I will explain here:
I have tried in AHCI mode and IDE mode from the bios and done fresh installs of Windows. Still the same.
After installing all the drivers, I get randomly in different programs "black" or sometimes "white" menus. Whenever I set the cursor on the menu (White or black part), the letters start showing up.
On Firefox for example, it happened where you write the address (Ex: www..) And when searching images too.
I have tried the original drivers that the Lenovo's website has for the S205 and the latest from Ati/AMD and nothing solves the problem.
What can this be? Faulty ram? Faulty OS? Problem with the graphic card drivers?
Please help, it is so frustrating.
Thank you so much.

Thank you very much for your help.
I will try capturing some screenshots if that helps.
I can discard the problem with the ram at the moment. I have tried a new set of ram (two 2gb modules = 4gb in total). The problem persists, even when they are tried individually. I also tried the original ram module the Lenovo came with (1module of 1gb), alone. Problem persists too.
However, I do not have a problem trying the VGA output. Will this help too? As I do not have any screen with HDMI at the moment.
What I will do too, is to try a Windows 7 from another disc, a Home version 32 bit. I hope this can get the problem fixed.
The main issue is that I bought this computer from Germany (From a store on eBay) and came with DOS. I will have to return it to the seller, I assume, if the rest fails to show any improvements.
Thank you for your reply and any more suggestions are welcome.

Problems with iTunes, please help

Hey:
This is my problem... I just bought and iPod Nano and installed the iTunes software, and at the beginning it was working perfect, then my computer started doing weird stuff every time iTunes was on and it even got me the blue screen of death (I have a PC and my OS is Windows Vista Ultimate) so I had to restart my computer.
After doing it, I cant open iTunes anymore. Each time I do I get first a message that says "iTunes has stopped working. Windows is looking for a solution to the problem.", after that I get a message that says "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if any solution is available."
Then I get a windows that says this:
"Download updates for iTunes
This problem was caused by iTunes. iTunes was created by Apple Inc..
Solution
A newer version of iTunes is available for download that will address this problem. Apple Inc. recommends updating to the latest version of iTunes to take advantage of security and stability improvements.
Go to the Apple Inc. website and install the latest version of iTunes:
Apple Inc."
But Im already running the last version and Ive even desinstalled and installed the software twice. I dont know what else to do and without iTunes, my iPod Nano is worth nothing.
These r the details of the problem Im getting:
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 7.5.0.20
Application Timestamp: 472bcf3d
Fault Module Name: QuickTime.qts
Fault Module Version: 7.3.0.80
Fault Module Timestamp: 473be8d5
Exception Code: c0000005
Exception Offset: 00055e30
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 720c
Additional Information 2: 87abfdde4e44868a2d32f6948e899598
Additional Information 3: 9842
Additional Information 4: 44f9b0c24d5b0e3b47d19db09c196961
Extra information about the problem
Bucket ID: 582161050
So, can anybody help me please??????
TIA
Antonio R.

What happens if you try to start Quicktime? Does it work normally? I am guessing that it doesn't, but describe what happens with any error message in full.
I am jumping the gun with the troubleshooting sequence here, but ...
Have installed any of the following - ACE & K-Lite mega codecs package, QT alternative, Storm codec, also WinAVI video converter. These are know to cause problems with QUicktime and need to be uninstalled.
ANyway I suggest you do a complete removal of iTunes and associated programs followed by a phased install of QUicktime then iTunes.
Download a new copy of iTunes and the stand alone Quicktime installer:
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Use the follwing method to remove the programs:
XP
http://docs.info.apple.com/article.html?artnum=93698
Vista
http://docs.info.apple.com/article.html?artnum=305409
Install Quicktime and check if it works, then install iTunes.
Does it work now?
This has been based on the assumption that QUicktime doesn't work, if it is OK here is an iTunes troubleshooting link:
XP
http://docs.info.apple.com/article.html?artnum=302856
Vista version
http://docs.info.apple.com/article.html?artnum=305491

Strange new problem with external effects and latency compensation

i'm currently facing a new , very strange problem with latency compensation for external effect devices. it alway worked fine for me but suddenly there are strange things going on. i'm suddenly running into problems when using sends which feed auxes going to external effect devices.
latency compensation is set to ALL !!!
easy setup :
- open an empty project and create 2 audioinstrument tracks. on the first one load the exs with a drumkit and record f.e. a bassdrum pattern. leave the 2. instrument empty.
- now on the first audio instrument create a send to bus 1 -> aux 1 and insert the i/o plug-in in the aux and route it to your external effect device. chose a temposynced delay.
- press play = everything is fine when audioinstrument 1 is highlighted in the arrange.
- press stop, click on the track with the 2. audioinstrument and press play = totaly weird timing problems. delay is only in sync when track 1 is highlighted.
- create a send in the 2. audioinstrument and route it to bus 1 -> aux 1 too = still the same problem
now insert ANY softwareinstrument in audioobject 2 and suddenly the timing for the delay is right.
go ahead and create a 3. audioinstrument track but leave it empty first. chose it in the arrange = again weird timing problems with the external delay.
insert any software instrument on audioinstrument 3 = still the same problem
now create the send to bus 1 -> aux 1 in audioinstrument 3 and guess what, timing is right.
*** is going on here ? can anyone reproduce that ?
it works fine when using sends which feed auxes with software effects inserted.
funny thing is, when i go to the environment and change aux object one to bus object 1 and insert the same i/o in it it works !!!
very very strange, please tell me i'm not crasy and this is a bug !!!
as said, latency compensation is set to all.
i'm using the mac pro 3.2 8-core running os 10.5.4, logic 8.0.2 and a motu pci-e audio system.
Message was edited by: Olaf Dieckmann

Welcome to the Discussions.
If you need it formatted FAT32, reformat it on your Mac. Use MS-DOS (FAT32) as the file system. If you don't need it for both PC and Mac, format it HFS+ and you'll be able to use the Retrospect Express software that came with it on your Mac.
John

New problem with display on Macbook Pro retina (Samsung panel)

Hello All,
I am a very new people on your forum but a few weeks ago i bought a new macbook pro retina with samsung panel.
I haven't ghosting effect on my macbook but i have a new and really bad problem.
I try to found a some information on Russians forums but nobody can help me with it.
I can see an artifacts in the form of flashing pixels on all display.
It occurs in 20-30 minutes after the start of work.
Today i try to test it on game Dirt 2 and i can see defects after 2 minutes after start. So i think it can be reason with Geforce 650 but when i back to desktop and use HD 4000 i still see a problem.
This is best seen on a black screen with high backlight.
When i try to connect TV via HDMI i can't see any problem in my TV.
So i really don't know what could be the reason.
I attached the video with issue to video hosting
http://vimple.ru/579f880e8b7045e09f8fc5bc097c5e2b
Also i have a many software problem like Crashing safari and iTunes. It can be a few times per day.
I really disappointed with my new Macbook.
I haven't any problem with old 2009 Macbook pro with Snow Leopard but Mountain Lion is not working well.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

New problem with camera and imovie 08

i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

Hi
Test another FW-Cable.
Test Your Camera on another Mac so that DV-in still works OK
Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
What Camcorder ?
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Free space on internal (start-up) hard disk ? (Others don't count)
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W

New Problems with IPod nano - crackle and clicking

Hi,
I got the IPod nano (2GB) a view weeks ago. I haven't changed anything - only copied mp3 songs and photos on it.
Today suddenly during jogging the nano starts to crackle and click - like an old analog tape. This didn't stop any more even after a lot of resets. I have connected my IPod with USB-2 onto my computer and recharged the accu completely. After disconnecting properly the problem is still the same. Also the buttons and the wheel don't work correctly anymore. Has anybody similar experiences? It seems apple has big trouble and problems with this new product. Maybe the IPod nano isn't fully well-engineered jet.
I am looking forward for your help and suggestions.
Thanks in advance!
Your Stephan

Hi Mike,
and what did you do finally?
Did you bring the Ipod back to
your dealer for an exchange?
My IPod didn't get wet during
jogging I have carefully kept an
eye on it.
Is this a general problem with the IPod
or only with some units?
Thanks
Stephan

Problem with code-Please Help!!!

Hey guys i have some problems with the following code:
1. I have to do a stutter and reverse of an array [ 2 4 ] and it should return [ 4 4 2 2 ]. I wrote the code and i get [ 2 2 4 4]. How can this be fixed?
public class Part1
     public static void main(String[] args)
          int[] values = {2, 4};
          stutterAndReverse(values);
     public static int[] stutterAndReverse(int[] values)
          //Stutter
          System.out.print("[ ");
          for (int i = 0; i < values.length; i++)
               for(int j = values.length-1; j >=0; j--)
                    System.out.print(values[i] + " ");
          System.out.print("] ");
          return values;
2. This one takes the array and returns the even numbers to the left and odds to the right. It works with the code i have so far but the odds on the right should be in order. For example an array of 6 gives the output [2, 4, 6, 5, 3, 1]. Mine gives [2, 4, 6, 1, 5, 3]. How can i fix this???
public class Part2
     public static void main(String[] args)
          int[] arr = new int[6];
          for(int i = 0; i < arr.length; i++)
          arr[i] = i + 1 ;
          printArray(arr);
          arr = evensToLeft(arr);
          //arr = oddsToRight(arr);
          System.out.println("Evens to the Left");
          printArray(arr);
     public static void printArray(int[] arr)
          System.out.print("[");
          for(int i = 0; i < arr.length; i++)
               System.out.print(arr);
               if(i < arr.length-1)
               System.out.print(", ");
               System.out.println("]");
     public static int[] makeArray(int n)
          int[] arr = new int[6];
          return arr;
     public static int[] evensToLeft(int[] arr)
          int split = 0;
          for(int i = 0; i < arr.length; i++)
               if(arr[i]%2==0) //even
                    swap(arr,i,split);
                    split++;
               return arr;
     public static void swap(int[] arr, int n1, int n2)
          int temp = arr[n1];
          arr[n1] = arr[n2];
          arr[n2] = temp;
Thank you for your time i really appreciate it.

now i'm more confused than ever...:(This'll probably make it worse :)
class Testing
public Testing()
    String[] values1 = {"2","4"};
    System.out.println(java.util.Arrays.asList(values1));
    System.out.println(java.util.Arrays.asList(stutterAndReverse(values1)));
    String[] values2 = {"1","2","3","4","5","6","7","9","11"};
    System.out.println(java.util.Arrays.asList(values2));
    System.out.println(java.util.Arrays.asList(evensOdds(values2)));
public String[] stutterAndReverse(String[] arr)
    String[] temp = new String[arr.length * 2];
    for(int x = 0; x < temp.length; x++)
      temp[temp.length - 1 -x] = arr[x/2];
    return temp;
public String[] evensOdds(String[] arr)
    StringBuffer evens = new StringBuffer();
    StringBuffer odds = new StringBuffer();
    for(int x = 0; x < arr.length; x++)
      if(Integer.parseInt(arr[x]) % 2 == 0) evens.append(","+arr[x]);
      else odds.insert(0,","+arr[x]);
    return (evens.toString().substring(1)+odds.toString()).split(",");
public static void main(String[] args){new Testing();}
}

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

New Problem with Premiere Elements 8-Blue overlay over video

I'm still trying to begin using the trial version of Premiere Elements and have a new problem. When I add video files to the project, they are displayed with a blue coating over the whole video when it is played, or in many cases it is just black with no video. If I click in the screen, I see
the stopped video as it shoiuld be (clear), but as soon as I start playing the video, then nothing works. I hear the audio but the video is either black or has a blue overlay making it difficult to even see what is on the screen. I've tried changing to software rendering during playback with no help. The program is unusable as it is. I also have problems adding files to the project when I try to add from files and folders. I can't select multiple files and when I try to add one at a time, the 2nd file replaces the first instead of being added. I installed using the compatibility options in Win 7 because the application is listed as being incomaptible (even though Adobe claims it is Win 7 compatible.) I would really love to have this program work. Any suggestions. I have a fairly powerful computer except for the graphics being Intel integrated rather than a separate card.

To answer my own question, disabling "Enable GPU" seems to eliminate the blue overlay. I found a reference to it on a page that previously was not available.

Big problem with neo2, please help

Hi
I just got my new neo with bios 1.4already in it and a 3000 winchester.
i did a clean install of windows, then newest 5.10 nforce from nvidia.com, I did not installed firewall.
And everything was cool except ethernet because it was not recognized (I mean the Nvidia was recognized but realtek gigabit was not recognized). here is the first question, Do I really need gigabit lealtek enabled in bios to connect to internet???
i have a comcast high speed internet and on other boards I don't need to configure anything, just install the windows and internet was working. unfortunately here is different, after installing windows and drivers n-force I don't have acces to the internet!!!!!!! I don't know what to do. On the back of mobo there arwe 2 lan connections slot. When I plug my cable to the first one, I don't see any light coming from the cable (you know the orange light bipping frequently) but windows is recognizing that cable was plugged in. When I plug it to the secong lan slot the orange light are binpping but the windows is saying "internet cable unpluged"!!!1
What a heck is going on??? please help me!!!!!!
I hope you can help me
Thank you

nevermind. I reset modem and everything works !!!!!!!!!

Re: Skype problems with calls (PLEASE READ)

no calling sound,trying to connect family, tried echo soud test no sound

Ceris wrote:
All my calls through Skype fail (no ringing, call fails after approximately 5 seconds). This includes calling the Echo/Sound Test Service. My skype is up to date, and I have no problems logging in. I am having the same problems on my Windows XP computer, and my Windows 7 computer. Every now and then Skype will go grey and say "connecting".
I have no problems with any other internet connection. It just started doing this today. I also canot receive any calls from anyone to my Skype account.
Help please? I've searched the message boards, but can't find any solutions.
Ceris wrote:
All my calls through Skype fail (no ringing, call fails after approximately 5 seconds). This includes calling the Echo/Sound Test Service. My skype is up to date, and I have no problems logging in. I am having the same problems on my Windows XP computer, and my Windows 7 computer. Every now and then Skype will go grey and say "connecting".
I have no problems with any other internet connection. It just started doing this today. I also canot receive any calls from anyone to my Skype account.
Help please? I've searched the message boards, but can't find any solutions.
Ceris wrote:
All my calls through Skype fail (no ringing, call fails after approximately 5 seconds). This includes calling the Echo/Sound Test Service. My skype is up to date, and I have no problems logging in. I am having the same problems on my Windows XP computer, and my Windows 7 computer. Every now and then Skype will go grey and say "connecting".
I have no problems with any other internet connection. It just started doing this today. I also canot receive any calls from anyone to my Skype account.
Help please? I've searched the message boards, but can't find any solutions.
I have checked every possible move, not able to hear faMILY AT OTHER END,pressing echo sound test no response.I have spent many hours sitting here trying to resolve this issue with no success.

New problem with MediaSource please h

Similar Messages

Maybe you are looking for