New processor.sys drivers curious question

i was downloading the new processor.sys file for windows xp and it failed on the install. in the ng i didnt see anyone post any troubles installing it, most likely to early. has anyone else have this problem occur? tia

It got me too.It did work when I installed it manually.
Try getting it form the MS Manual Updater It should be under (Find driver updates for hardware devices)then(other hardware)then(Manufacturer name:microsft corporation).Don't try to save it to your dektop.For some reason it won't do it.Save it to C: or anywhere but the desktop.

Similar Messages

I want to disable banner sheet in new v4 print drivers.

Hi,
I have a print server 2012 r2 on work and have installed several xerox printers on it with the new v4 class drivers.
I want to ask how can i disable banner sheet on this new drivers. Is there any powershell command to do that because i cant do that in the setings of the printer like in v3 drivers. This will save us money on paper because most of the employees print one
or two pages and the printer print another page as banner sheet.

There's a registry key that defines the separator page here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\<printer name>
Called Separator File. Set that to blank and restart the spooler service. If the value isn't defined there, I'd guess it's defined on the printer itself and you either have to manually adjust in on the device control panel, access
the device's internal configuration web site and adjust it there, or leverage Xerox provided APIs.
There may be a more Powershell way to configure it, but I couldn't readily find one.
That setting isn't typically defined by default, are these new printers? Are they only newly installed on your 2012 print server? I'm just as curious that a banner page is unexpectedly defined as the fact that you can't access the configuration
through the normal gui.
I hope this post has helped!

New Audigy Beta Drivers did they add EAX 4.0 to an Audigy 1 Platinum

Hello,
does the new Audigy Beta Drivers add EAX 4.0 Support to an Audigy Platinum ?
Greetings Picard007

Audigy (hardware base one) supports EAX3 (EAX Advanced HD) hardware. Audigy2 suports EAX4 hardware. EAX4 is supported with latest OpenAL drivers on compatible hardware.
More: http://en.wikipedia.org/wiki/Environ...dio_extensions
Quote:
EAX has nothing to do with actual 3D audio positioning. Positioning is done by Microsoft's DirectSound3D API. An alternati've to DirectSound3D, called Open Audio Library (OpenAL), surfaced in 2003 in several titles. OpenAL allows direct hardware acceleration of audio, like DirectSound, including EAX. As of 2006, the API has been used in many popular titles including Doom 3 and Prey. These games support EAX 4.0 if audio hardware with an OpenAL-supporting driver is present.
Most releases of EAX versions coincide with increases in the number of simultaneous voices processible in hardware by the audio processor: the original EAX .0 supports 8 voices, EAX 2.0 allows 32 (Li've!), EAX Advanced HD (EAX 3.0) supports 64 (Audigy), EAX 4.0 again supports 64 (Audigy 2), and EAX 5.0 allows 28 voices (and up to 4 effects applied to each) (X-Fi).
Message Edited by SoNic2367 on 0-07-2006 02:0 PM

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

If you are talking about features of the MBP itself, as long as you are not looking at the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade. Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
The Hi Res screen is good if you do a lot of graphics work.
Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
Just some thoughts.

New Processor Working?

I have a Dual Processor and just switched out a faulty processor. I do not know if the new processor is refurbished. How can I tell if it is even working? I do not think it is working because when I make a movie on iMovie, it still does not work right. Before my processor died, i Movie worked well. I tried iMovie with one processor, but it would not work right. This is why I question if the new one is working right. Is there a way to tell on my end?

Okay, my question is back open, thank you.
My System profiler does say that each CPU is version 2.2.
I have the older 1.8 Dual processor. It is about 4 1/2 years old.
I will have to check iStat to see if both are working. This is what I was really trying to find out.
I did not put the processor in. It was done at a local Apple Seller (not an Apple Store). They did not run a thermal calibration at first. I had to bring it back in because the fans kept running. They did it, and now the fans hardly run.
I do not recall if CPU A or B was running hotter. I will check when I get home.
I raised my original question instead of just bringing it back in again because I have lost confidence in them. First, it took two weeks for them to diagnose the problem. Then, the tech did not know he was supposed to run a thermal callibration when they did put in the new processor.

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2

New MacBook Air and iPad question

Hi everyone,
I purchased a Macbook in 2009 and have today upgraded to a brand new MacBook Air. My question is about my iPhone and iPad and keeping these up to date. Both are running iOS 5 so I do all updates by wifi which is easy and fast. Although prior to iOS 5 of course I had to connect these to my Macbook and update that way. At this stage I am still setting up my new Air and just wonder if there is even any need to connect either device to it? I have the music that I want on both devices and new used my Macbook to download any apps, I always do them directly on each device. So do I need to set up either on there? At this stage I think no but I am just wondering if I am forgetting something.
Many thanks

What 'app'?
If you owned them before they are free.
Peter

IMac G4 New Processor

hey everybody. I was wondering if anyone could help me with something. I have an iMac g4 snowball. It has a
700 MH Processor.I would like to put a newer processor in it. It is the best computer I have ever used as far as architecture.
My own opinion of course and I don't expect others to agree, but for those of you who like to mess around with computers,
I'd like some help to make it better. So, is this possible?

As the dremel junkie mod is my mod, I can assure you that it is not that difficult, nor that expensive. In fact, depending on your goals, it may be the cheapest option for upgrading available. I would not bother upgrading to the 800mhz mobo (there will be no discernible difference) nor trying to track down the Daystar CPU or purchasing a working 1.25Ghz PPC G4. The reason is that the problem is the Power PC. It is no longer supported, not even by apple. No new software is written for it, including browsers. Web video formats and plugins are not optimized for it, if they even work at all. This will only continue to get worse.
I know this may seem daunting, but for less than $20 in materials, you can turn the video cable that plugs into the iMacs motherboard into a DVI cable. No soldering required. I have a very detailed step by step for the 17" version (but I have the pin out for the 15" and can talk you through it). It can be done in less than an hour and involves pushing 14 pins onto a dvi connector, connecting 3 wires and a resistor, then using 4 or 5 alligator wires to hook it to a molex connector and plug that in somewhere (even a molex to AC wall plug adapter). The reason it's so easy is that apple has already put a DVI cable through the neck (it uses TMDS, the same signaling) you just have to put the pins in the ight place of a dvi connector and add power.
The rest is up to you as to what to upgrade it to. Some options include:
1) Connect the DVI to the back so that it can hook up to an external computer. I use a 20" iMac G4 (modded) as a monitor for a Mac mini. I added a USB optial drive to replace the one missing from the 2011 mini. I love this setup.
2) Use this as a wired or wireless (with a wireless DVI USB dongle) second monitor for a laptop. Or put an apple tv in the base and use it as an airplay receiver.
3) Add a small motherboard as I have done to make it an all-in-one, most expensive, but depends on what you choose. This will have to be a hackintosh if you want Mac OSX, but you are free to run any OS you want. Run Windows, Linux, or even HTPC software like Boxee or XBMC.
I began this project because I like you, love this design and wanted to keep using it despite the outdated computer inside. Do not waste money on minor incremental upgrades to obsolete architecture. Instead make this DVI compatible so that you can use its ergonomic design with any computer (inside or outside) you see fit. I've worked hard to make this as simple as possible and if you can assemble a computer from off the shelf components and strip and connect speaker wire to a home stereo system then you can do this. Hope this helps. JB

Adding a new processor + RAM to a Sun Fire X2270

Hi,
I have a Sun Fire X2270 with Intel(R) Xeon(R) CPU E5504 @ 2.00GHz CPU and 8 GB RAM from factory.
The server has 2 processors sockets, I want to add another new processor (before it gets older).
Can I just buy a new processor from Internet? I called Oracle but I think they are not interested in selling and sending just one processor.
According to the tech specs of the server hardware I have a couple of Intel processors options apart of the one that came preinstalled, the same Intel Xeon 5500 series.
This is the one I want:
Intel® Xeon® Processor L5520 (8M Cache, 2.26 GHz, 5.86 GT/s Intel® QPI)
http://ark.intel.com/Product.aspx?id=40201
Can I just buy it and plug it in? no special version from Sun/Oracle? isn't the same exact model of the one that already has, but the same Intel series, is this possible to have different processors models? this one has a couple of more features and it is faster.
Of course I also will buy more RAM, what do you say about this one:
Kingston KTS-SF313/8G 8GB 1333MHz Reg ECC Module
http://www.ec.kingston.com/ecom/configurator_new/partsinfo.asp?root=us&LinkBack=http://www.kingston.com&ktcpartno=KTS-SF313/8G
Thank you in advance?

Hello
I think that you have got an obsolete architecture (RAM/CPU). I suggest you to read this:
*Sun Fire[tm] X2270 M2 Server - Full Components List*
CPU Module
Option # Manufacturing Part # Description Previous Part #
X4371A Price 310-0239 [F] Heatsink n/a
371-4984 [F] 3.06GHz Intel 6-Core Xeon X5675, 95W n/a
X4372A Price 310-0239 [F] Heatsink n/a
371-4983 [F] 2.53GHz Intel 6-Core Xeon E5649, 80W n/a
X8381A Price 310-0239 [F] Heatsink n/a
371-4885 [F] 2.4GHz Intel Quad-Core Xeon E5620, 12MB, 80W n/a
X8382A [S] 310-0239 [F] Heatsink n/a
371-4888 [F] 2.8GHz Intel 6-Core Xeon X5660, 12MB, 95W n/a
X8383A [S] 310-0239 [F] Heatsink n/a
371-4889 [F] 2.93GHz Intel 6-Core Xeon X5670, 12MB, 95W n/a
Memory
Option # Manufacturing Part # Description Previous Part #
X8361A Price 371-4917 [C] 8GB Registered DDR3-1333 Low Voltage DIMM n/a
X8362A Price 371-4916 [C] 4GB Registered DDR3-1333 Low Voltage DIMM n/a
X8359A [S] 371-4902 [C] 8GB Registered DDR3-1066 DIMM n/a
X8360A [S] 371-4901 [C] 4GB Registered DDR3-1066 DIMM n/a
XRA-ST3C-24G2FMD 1 [N] 371-4531 [C] [N] 24GB SATA-based Sun Flash Module n/a
1 Support for XRA-ST3C-24G2FMD was cancelled on 07/28/10.
For more details:
https://support.oracle.com/handbook_private/Systems/SunFireX2270_M2/components.html
https://support.oracle.com/handbook_private/Systems/SunFireX2270_M2/spec.html
Bye.

New AJA Kona drivers for CS6

New AJA Kona drivers for CS6 are posted for download.
Link to PC version.
http://www.aja.com/en/support/kona/pc/kona-3/
Link to Mac version
http://www.aja.com/en/support/kona/mac/kona-3/

Yay, so glad to hear it. I posted on creative cow under the AJA KONA Mac and received this response yesterday. As always, thanks for posting updates lasvideo!!
Forum: AJA Kona - Mac
User Name: walter biscardi
Post Subject: Re: LHe Plus & Premiere CS6 success?
Two of our systems are LHi boards with zero issues to report other than we cannot lay back to tape properly yet. Though the new drivers released today promise to address that problem, we haven't had a chance to download and test yet.

New VIA Audio Drivers

VIA has released a combo audio drivers to support all these southbridges :
VT8231
VT82C686A
VT82C686B
VT8233
VT8233A
VT8233C
VT8235
Here is the link : http://www.viaarena.com/?PageID=69
And here is the direct download : (Windows) http://downloads.viaarena.com/drivers/audio/ComboAudio_a1u311b.zip

I installed the MSI Drivers from the MSI cd. All ok but the clock and info tabs were missing. I upgraded the driver from msi site to 3000 and no tabs.
X(
Before the GF4 i had a gf2 and i realized i forgot to uninstall the nvidia drivers before installing the new card's drivers. I uninstalled them and reinstalled the msi driver 3000. But no clock nor info tabs.
Can someone help me? Are those tabs needed?
I'm using xp pro, intel p4 1.8 on motherboard intel d850md, 1gb ram.
Also the 3d turbo experience gives me msivga.ocx initialization error.
Thanxs.
Quote
Originally posted by Assaf
The MSI tabs only show if you use an MSI driver from the MSI website.
They are nVIDIA drivers with the added MSI tabs and logos...
But there is no real reson to do it.

New hard drive/new processor

i recently upgraded to a new processor/hard drive, my old hard drive is still in my computer as local drive F, i went there to move my ipod software onto the new hard drive, and it didnt work, so i reinstalled the software onto the new hard drive, now i cant get my library info from the old drive to the new, if i open itunes from the old drive, it appears empty! i still have all the info on my ipod, if i plug in the ipod will it be wiped clean? is there a way to transfer the info from the ipod to the computer, i have 1300 songs and many photos, i dont want to have to import all that again

"if i plug in the ipod will it be wiped clean?"
If you let the iPod sync to a blank iTunes -- YES!
Based on your psot, your music and photo data files are still on the HD, just not within iTunes as References. You do have some options:
1 - Try to recover your original Library by moving the music folders and database file back to their original location (now on the new C: drive) - then move them to whatever location you want (if desired)
2 - Move all the music files to their final location, then Rebuild the Library within iTunes by: File=>Add Folder
3 - Recover the music from the iPod using any one of several methods (but as long as you have the files on the PC already, why?)
Option 1 will retain your Ratings, Play Counts, Last Played and Date Added attributes as well as your Playlists.
Option 2 will lose the above music metadata.
Option 3 can do either, depending on the method selected.
Whatcha wanna do?

Am a new mac user, my is question is how to get mac os x 10.5 on to my mac 10.4

am a new mac user, my is question is how to get mac os x 10.5 on to my mac 10.4?.

Skip 10.5 and buy Mac OS X 10.6 from the online Apple Store.
(81944)

New AJA Kona Drivers 10.1 are out

New AJA Kona Drivers 10.1 for Premiere Pro/Avid/FCP are out . If you are running CS5 you still need the Adobe Plugin drivers 9.1 . http://www.aja.com/support/konaNEW/kona-3-3x.php

Yay, so glad to hear it. I posted on creative cow under the AJA KONA Mac and received this response yesterday. As always, thanks for posting updates lasvideo!!
Forum: AJA Kona - Mac
User Name: walter biscardi
Post Subject: Re: LHe Plus & Premiere CS6 success?
Two of our systems are LHi boards with zero issues to report other than we cannot lay back to tape properly yet. Though the new drivers released today promise to address that problem, we haven't had a chance to download and test yet.

New comer ask 2 simple questions:how to set the use of the right click of

New comer ask 2 simple questions:how to set the use of the right click of your mouse?
I don't know why when i click the right button of my mouse in logic, sometimes it's the same funcion as my left one, some times it's the same function that opens the tool menu....But in MacOSX,it's all okay.Just the weired thing in logic ,please help
2.is there any kind of filter in Score? I mean, in midi track I have a C1 note, and I don't want the C1 note shown in my score, I want every note show which are above C2, like a filter. I think this is helpful dealling with some keyswich things,how can we do that?

In Preferences -> Global -> Editing you can choose weather right click is assignable or opens the tools box.
Not to sure about the score dude

New processor.sys drivers curious question

Similar Messages

Maybe you are looking for