New Project, Formatting Issues

Okay so I'm going to try to explain this as best as possible because it can be quite confusing.
Now I made a youtube background in which I downloaded a template which basically showed all the boxes in the right spot, when I added all the images, resize, all the cool stuff in general. I saved the image as .png and it worked.
By the way if you don't know what a background is it's basically a layout for a channel on youtube that will add a distinct look.
Now here's my issue. On MY monitor I have black bars on the side, but everything fit's in nicely. I have a 24" 1920x1080 monitor. But then when I show it to a friend with a laptop screen, things cut out but there's no black bars. Basically the results change for everyones monitor and resolution. I understand why that is.  But WHY do some people's channels on youtube have a background, and EVERYONE sees it the same and nothing cuts out? Or do things really cut out depending on size of monitor?
Here's what I created:
http://www.youtube.com/user/ev1ldanny4?feature=mhee
Like I said before, the graphics on the side might cut out. eetc..
My main question here is: Why do people see differently on my background yet on others they see it the same? ASSUMING that on other backgrounds EVERYONE sees it the same (no black bars, everything fits etc... ).
Hopefully I explained that well.

The "auto adjustment" you're speaking of seems to consist of just cropping the image off around the edges.  I'm not seeing any resizing or anything like that happening.
Single 30" monitors are usually 2560 x 1600 pixels.  If you make the image that big it seems quite unlikely anyone's going to see past the edges of the image on a single monitor.
On the other hand, I have 2 monitors at 1600 x 1200, so my desktop is 3200 x 1200 total, and I can make the browser wide enough to see the edges.  And of course some extremists have 6 or more monitors...  And lastly, don't forget that the browser could be set to a "zoomed out" view (e.g., 50%).
Bottom line is this:  You need only make the image large enough to satisfy your target audience in typical situations.  I would assume that they really only want to see the page on one monitor, and that if they make the browser ridiculously wide they probably won't die of shock if they see black bars.
In short, there's nothing really wrong with what you have now.
-Noel

Similar Messages

  • I've been using FCP 7 on my iMac for quite some time with great success.  Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

    Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug)  I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years.  I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

    YOU ARE A LIFE SAVER!  I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

  • New to MAC: Clip vs. Sequence format issues causing slow Quad w/FCP?

    Hi all,
    I'm brand spanking new here and a recent Mac convert from Vegas. I figured that if I was going to upgrade, I would do it right. Don't get me wrong, I love Vegas, it's just that I'm tired of PC hardware conflicts and wanted to hop on the just-plug-it-in mac bandwagon and the ever increasing market share for FCP. Although the learning curve has been steep with FCP, I consider myself pretty savvy with Vegas and now a novice with FCP, I like the interface and there are certainly pros and cons. So far so good, but I have many questions.
    This Quad has so much horse power and I'm having to render all the time. I am doing compositing and green screen stuff, but I'm thinking that with SD footage, the computer should be running sleek at satin.
    I recently read another post in here that had a lot of off-topic discussion. I'm ignorant on the clip versus sequence settings and how they relate. In Vegas, most of these settings were automatic. In other words, whatever footage I threw at it, it dealt with. My footage was captured using default settings in Vegas and everything is in .avi format. When I was first bringing clips into FCP, the software suggested I use media manager to convert the files but I didn't want to suffer quality loss so I ignored it. Now that I have a rough cut of the entire 16 minute project, I'm starting to apply filters and effects and am noticing a bog down.
    Now mind you, things are still faster than my old Pentium 1.4Ghz, but with 10Ghz under the hood (who would have imagined it possible?) I know it should run smoother.
    Sorry I'm being so verbose, but my knowledge of formats is weak so I want to cover the bases. We shot on a DVX100A and mostly wide screen setting. In retrospect, this was a mistake as the DVX100A in wide screen simply puts black stripes on my clip versus being able to utilize the whole thing. Anyway, hind site is 20/20.
    Here is my clip information.
    .avi
    29.97 fps
    720 x 480
    DV/DVCPRO - NTSC
    Data rate: 3.6MB/sec
    Pixel aspect: NTSC - CCIR 601
    Field: Lower(Even)
    Alpha: None
    Composite: Normal
    Audio is 48 and 16
    It is possible that I captured the video in the wrong format. I have to use the "anamorphic" setting in FCP to make the footage look as though it's in the right aspect ratio. Correct me if I'm wrong, but anamorphic requires the use of a special lens when shooting yes?
    I'm wondering if I should recapture the footage using FCP or will using Media Manager sort things out? If so what is the best way to do this as I don't want to lose anything that I've done. And is it even possible to recapture the clips without screwing up everything that I've already done, about sixty hours of work so far.
    Worse comes to worse I'll just work with things moving slowly and stick it out until this project is done and then use FCP's cool logging/capture interface next time around. By the way, I captured this stuff long before I bought the MAC.
    Any help on this would be appreciated.
    Tyler
    G5 Quad   Mac OS X (10.4.6)   2.5GB RAM

    Hi,
    I spoke with the DP and it was definitely not shot anamorphic. Most of the footage was shot in 16:9 format which, on the DVX100 means that there is a black strip on the top and bottom of the clips as you probably know.
    I recaptured a clip from scratch into a new project using the easy setup dealio in FCP. It is standard 3:2 and the clip looks fine. In my existing project is where I have a bit of a jumbled mess I'm afraid. I have a clip that looks fine in it's sequence, but when placed into the Main sequence, which has the same settings, it appears in a different aspect ration.
    Yikes, I'm going to keep playing around. I'm starting to get a feel for what the format should be. I'll post again tomorrow when I have a better idea of how to answer your question.
    Thanks for taking the time to pipe in here Denis.
    Tyler
    thealmost
    Tell us more about your footage. In your original
    post you say you shot in "letterbox" mode, i.e. fake
    widescreen with the bars top and bottom. Yet you say
    your sequence has to be put in anamorphic mode for
    this footage to look right.
    If that's the case, something is wrong. Footage
    that's letterboxed in the camera is 4:3, not
    anamorphic, and if you checked the anamorphic box for
    this kind of footage it would look squished.
    I'm thinking that you could have genuine anamorphic
    footage, that you are working with in 4:3, which
    would be taxing your system somewhat. It's not clear
    (to me anyway) from your original post.
    Can you clear this part of your problem up?

  • Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive,  a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

    Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive,  a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

    Install NTFS 3G
    http://macntfs-3g.blogspot.com/
    If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system.  However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
    I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

  • Podcast Not Displaying In New iTunes Format?  Causing Issues

    My main podcast is The Paranormal Podcast. For some reason, despite its popularity the iTunes team has not converted it to the new iTunes layout. I have two other podcasts which have been converted with no problem.
    As a result, when you click to read the reviews on The Paranormal Podcast page, it says "not available in the US Store"?! Although you can download or subscribe just fine...I have tried submitting a ticket to iTunes via the "report a problem" drop down with no luck. Has anyone else had this issue? Any suggestions to get Apple to fix it?
    My shows have been featured many times and the iTunes folks shave always been great to my shows but this is a little frustrating. Thanks for your help in advance!

    Firstly, may I just clarify the terminology so we don't get at cross purposes. Your feed is at
    http://jimharold.com/?feed=podcast (see at the bottom of this post for further comments).
    The URL which you posted in your second post (which arrived after I'd started composing my response) isn't a feed but that of your iTunes Store page:
    http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=78459818
    and this is indeed the link which would have been in the original email I referred to.
    I was intrigued to discover that your podcast is indeed being displayed in the old blue format - I'd not seen that before - every other podcast I've checked, including my own, appears in the new white format. I would have assumed that the new look was just a 'skin' displaying the same information and would have affected all podcasts immediately. Apparently not - probably it will change eventually.
    Your podcast is fully available and behaving entirely normally, however as you say, though the first three reviews are showing on the page the 'see all reviews' link doesn't work.
    Not being privy to the inner workings of the Store I can't suggest a reason for that: if you want to chase it up you should contact Support rather than using the 'Report a concern' link:
    http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'.
    It's possible that you won't get much of an answer; it's also possible that it will sort itself out eventually.
    Regarding this feed, it validates and works OK, but Feedvalidator throw up some minor errors in its report which you may want to look at (for example you have a relative link which isn't going to work) - however I don't think any of these have much effect on iTunes.

  • Issue With Creating New Projects

    Hi there,
    I've been using PP for a long time with no problems. However, I've been using a single project (and multiple sequences within it). I recently tried making a new project with different settings - upon watching the video exported from this, it freezes (In Quicktime, VLC and even when uploaded to video sites such as Youtube and Vimeo).
    So, this was a disappointment after I'd worked on a project for a while - I tried making new projects, even with the same settings as my single project that does work, and found the exact same - the video exported freezes a few seconds in.
    Is this a problem many have come across? I have an issue in that I have no way of re-accessing registration details - this account was simply made for a trial download. If there are any solutions that do not involve reinstallation, I'd love to hear them.

    Try this: http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html
    Other than that, I think you'd need to provide more information about the media used, the system used and what you're trying to accomplish.
    Dennis

  • Best format for new project.

    I suspect the information I am seeking exists somehere in these forums, but I can't locate it here or in Apple's Help. Thanks in advance for your advice.
    I am finding it hard to figure out which format to use for a new project. My confusion probably stems from the fact that iMovie is designed primary for use with a DV video camera, but that's not where I am starting from.
    I have a bunch of mpeg-4 video clips that I imported using EyeTV from old VHS tapes. I can convert them to DV, but it takes a long time and the files are obviously MUCH larger. I notice that I can start an iMovie project in mpeg 4 format. Can I remain in the MPEG-4 format throughout the editing process and then burn with iDVD or Toast 7 with good results? (That it to say, similar in quality to transcoding to DV and working in that format.)
    Thanks,
    Greg

    Can I remain in the MPEG-4 format throughout the editing process and then burn with iDVD or Toast 7 with good results?
    I honestly don't know.
    Why not do both with the same clip and see for yourself? You need two projects in iMovie, but you can add both to the same iDVD project. It will only cost you a DVD-R disc.

  • New format issues

    Hi,
    I guess these might be issues with incomplete migration to the new format but I'll post them here nevertheless:
    Incorrect post count - The "total number of posts" in the user information seems to reflect the total number of posts online at the time of the transition instead of total number of posts to date
    Joined date changed - the "date joined" in the user info seems to have changed for me - no biggy but this might point to other problems
    Incorrect migration of old formats - the old discussions had the editor shortcuts "ii " at the beginning of a new line to create italic text - all these post now display "i " at the start of such lines (with the text not being in bold)
    Level info missing - according to the help file, a user should be able to see his/her level per topic as well as overall - I was not able to find this information at all
    But then, I am happy to see that you are keeping to make improvements to this forum and I thank all of you for your work - I am especially happy about the new "Preview" button for new messages!
    Andreas

    Another items is:
    Email Notification do not use subject of topic -
    In old system the email notifications showed for example "New Formatting issues", or "Re: New Formatting issues". On new system email notifications so as example:"Apple Discussions forum "Feedback about New Discussions" has been updated by Andreas Amann", or "Apple Discussions forum "Feedback about New Discussions" has been updated by John Smith", and so on. Makes it impossible to thread post by topics because all notifications only change if the post is from another group.

  • When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
    (PS Everybody please make noise on this one so apple comes up with a solution.)
    < Edited by Host >

  • Issue with Anonymous Authentication and updating or starting new projects

    So 2 weeks ago I had a post about Anonymous Authentication found here:
    https://social.technet.microsoft.com/Forums/office/en-US/9b0e6eec-190a-4b48-a280-6adef441659a/issue-with-anonymous-authentication-and-people-picker-and-reports?forum=sharepointgeneral&prof=required
    That issue has been resolved but has created a new issue. We have Anonymous Authentication disabled but when one of our users tries to make a new project she gets the following:
    Unexpected response from server. The status code of response is '0'. The status text of response is ''.
    When she tries to edit an existing project, she gets the following:
    The server was unable to save the form at this time. Please try again.
    If I re-enable the Anonymous Auth. everything works for her again, but then we face the issue from the original post with reports not publishing.
    Any ideas on how to make everything get along?

    #apDiv2 {
        position: absolute;
        width: 698px;
        height: 299px;
        z-index: 1;
        left:50px;
        top: 117px;
        overflow: scroll;
    Don't forget to fix your code errors.  You're still missing a <body> tag in your markup. 
    Nancy O.

  • When I open a new project what format do I use with clips from Canon Legria (1440x1080)?

    I have Premiere Pro CS 5.5 and a Canon Legria HF S100 digital video camera. My frames are 1440x 1080.  I have a widescreen Sony tv on which I want to play my video when it has been edited and burnt.
    When I opened a new project in Premiere Pro I set it as follows:
    Editing Mode: DV Pal
    DV Pal Widescreen 23 KHZ
    Pixel aspect D1/DV Pal Widescreen 16:9
    However, I burnt the sequence as an experiment and lost lots due to cropping in the final version.
    I used to have Premiere Elements. If memory served I set it as  AVCD Full HD 1080i. I had no problems. I tried the AVCD 1080i setting on Premiere Pro but this didn't work either. I still got cropping.
    Which settings are adviseable to ensure I can see the full clip on screen when it has been burnt? In addition, what is the difference between Anamoprhic and square pixels?
    Sorry for banal questions. I got Premiere Pro because I was frustrated with Elements constantly crashing. I have to confess to being totally bewildered by the techinical information that I've read.

    Best is to edit in HD and export to SD.
    You need the AVCHD 1080i 25 Anamorfic.
    Or drag a clip into the New Item icon which will give you a matching sequence for your footage.

  • Issue Logic 9 Crashing when new project is started

    i have been having this drama with logic 9 over last few days first it was my mac pro playing up now logic,
    whenever i start up logic everything works fine then when i go to new project, one of my templates or open any project it freezes , what it specifically does is when i got to the finder at top the rainbow pin wheel pops up and it just keeps spinning until i am forced to "force quit"
    included is a log of what happened when it crashed last
    http://www.speedyshare.com/files/23872264/logiceffor_report_19082010.rtf
    PS i am using a OSX 10.5.8 / Macpro Intel Xeon 2.66 Quadcore late 08 model
    any help would be appreciated

    yes i am using latest version of logic with Project mix i/o and novation remote keyboard (something in my head was telling me that auto map might of done this but after i uninstalled still had dramas)
    every this looks ok until i got the finder then the rainbow pin wheel of death pops up and will not go away until i force quit , even bloody cubase seems to be working right

  • Issue in creating new project or model

    Hi,
    I am getting error message when i am trying to create new project or model.
    This is the error "java.sql.SQLException: ORA-00001: unique constraint (ODIW.PK_MOD_FOLDER) violated". Please tell me how can it be resolved.
    Regards,
    Anzeen

    The clue is in the constraint name, you are trying to create an object and the code of that object already exists in your repos- Have you renamed any objects and skipped past a warning about changing codes on existing objects ?

  • New Project - New Problems or The day the Reaper died

    Ok, this is more like telling a story than a cry for help.
    The story is about a new project, new (great) results and the disaster that followed.
    Well story starts October 21st with me upgrading rig 1 with new parts. They came for my Opteron165 setup which oc'ed nicely but didn't make it far enough. So board, cpu and ram of rig 1 (sig) got replaced by the following parts:
    The new cpu is an Athlon X2 5200+ EE (TDP 65W), 2.6ghz, 2x 1024kb L2 cache, 90nm, F3 stepping.
    The board is from MSI (of course), a K9N SLi Platinum. Very nice board and luckily it is PCB version 1.2 which features a heatpipe while the older version just had a very bad cooling, passive aluminium heat sink. The older version is the one still to be seen on MSI product site.
    The new one looks therefor way better and stays cooler:
    In addition I threw a pair of the finest ddr2 ram in it. A 2gb dual channel kit of OCZs new DDR2 PC2-6400 Reaper CL3 Edition. DDR2-800 with 3-4-4-15 (stock), guranteed to work with 2.3volts.
    So suppositions for oc were great and I started:
    First of all upgraded the bios from 1.8 to the latest 1.10. Then I thought why go step by step, why not starting big. So I set HT clock to 250mhz, resulting in a cpu clock of 3250mhz (multi 13), Hyper transport link set to 800mhz (x4), ram very relaxed (divider 667, 5-5-5-15 2T). It didn't post but I thought solution is easy, forgot to set extra voltage for cpu. Next try at 3250 mhz with 1.25v and set 0.1v extra in bios. It didn't post. I set voltage to maximum but no luck. Tried again but this time I lowered the HT link to 600mhz (x3). Now it posted even with 1v extra and it also booted XP but seemed to be not very stable. So set extra voltage to 0.15v which enhanced stability greatly.
    After minor driver problems my old XP installation worked pretty perfectly with the new setup. Time had come to see if it was stable and I started Orthos. It seemed to be ok, 1hour no problems, 2hours, 3hours and bam... 3hours 40 minutes and that's it. I thought "Damn, but it will make it with more voltage". I added more voltage (0.2v extra) and started Orthos again but no way, at 4hours 32 minutes it stopped again.   
    I'm not easy to discourage and so I added 0.25v to the 1.25v vcore and tried another time. Still 250x13 = 3250mhz.
    And it worked!
    Orthos now easiely worked six hours when I stopped it myself to see if it would also be stable with more intensed ram settings. I set ram divider to 800mhz (1:1) resulting in DDR2-929 and timings to 4-4-4-15 2T.
    I started Orthos and left the machine alone... Outstanding 16 hours later it was still working!
    After 17hours 5 minutes and 50 seconds of running Orthos I knew I had a stable beast!
    It also worked with ram set to divider 667 (resulting in 406mhz or ddr2-812) and 3-4-4-15 2T. However 1T was a real killer, thats why I left command rate at 2T and were happy so far.
    Performance was really good and I wanted to know if this would increase my 3dmark06 results which were already great with old setup because of nicely oc'ed 8800GTS 320. The opteron could do 9572 3dmarks with it.
    The new setup easiely broke the 10.000 points by reaching 10306 points with cpu at 3250mhz, ram at ddr2-929 (4-4-4-15 2T), vga as seen in sig.
    It really seemed to be finished. The rest would be just playing around and going for suicide clocks. At least that was what I thought at that time.
    Before maxing it out I wanted to have the Vista 64 Ultimate installation also running with the new setup. I hadn't booted vista since upgrading to the am2 system, so I tried for the first time....
    AND NOW EVERYTHING GOT F***** UP
    Vista welcomed me with a blue screen instead of a logon screen. I was pi**** but aware it might not like changing from NForce4 SLi to NForce 570 SLI. Next step was trying safe mode but vista thought of blue mode and showed a screen of that colour. I thought "ok, maybe you dislike setup change" and so I went for a clean install. I even formated the partition and gave it a go. Installation was fine 'til first start. Well, it wasn't a start to be honest as vista told me it was not able to do this. Repair wasn't successful either.
    Assumption was now system is not making the oc clocks although proved to be stable under XP. So I removed any oc and loaded fail-safe mode in bios. Relaxed ram timings to 5-5-5-18. I started installing vista again, thought I could oc again when it is installed.
    Oh boy, how wrong I were...  The 2nd installation turned out to be as faulty as the first and I tried again and again... After installation failed nine times I were finally discouraged.
    I just wanted to boot XP for now, forget about installing vista and maybe ask here if it this was a known issue.
    Well, I didn't get to see XP. I was just informed about a missing file that also prevented to boot safe mode. I took my XP cd and started automatic repair. After this was nearly finished the first errors and notifications about unknown, missing or corrupted files appeared. Although XP made it to finish install and booted successfully. But this XP wasn't a real XP as many things didn't work. I couldn't install drivers because loads of errors and crc crap made working with it impossible. Clear install time! But no way, same issues like seen in vista.
    Now I were pretty desperate and I urgently needed an idea.  I came to the solution maybe I could try with single channel, using just one mem stick. I removed one and tried installing XP again. It worked without any issue. Even driver installation and other software worked without a problem. Now I were even able to install Vista.
    But still I didn't know what caused all the trouble. I had three suspects: Mobo, ram, cpu. I doubted in faulty board but cpu (failing to control dual channel) or the ram stick I removed were my favorites. As it was the easiest to try I put the other stick back in but used a slot combination that would cause single channel.  Booting Vista now turned out to be a disaster. Errors, corrupt files and so on. Same with XP.
    Conclusion: Dual channel is not the problem. Added mem stick was now suspect no.1. I took the first one out and started memtest. Memtest didn't show errors after 8hours. I wondered and started Vista. Result was the same as seen before with two sticks. Errors and access violations. Replaced this stick with the other one and everything was fine again.
    Next day I tried with a borrowed MDT 2gb dual channel kit which also worked without a problem. 
    Sad but true one of the Reapers is K.I.A. . Damn....
    Now I'm sitting here with a borrowed kit of value ram which luckily allows me to let the cpu run at 3250mhz with mem divider at 667mhz (result: 406mhz) and which I can luckily keep 'til I get another kit of Reapers. I have to send my current Reapers back to vendor these days and wait for the rma process and wait and wait....
    So what started greatly ended not so great. For now I'm sick and tired of seeing bios screens or installing windows and I'm also pretty pi**** because of all the data I lost. Some crucial ones among them.
    Main problem remains: I have no idea WHY the Reaper died. I never set any higher vdimm than 2.3v what should be ok for it. It never felt hot and was directly in the main airflow. Also I have no clue why memtest didn't find any error with the faulty stick.

    Quote from: flobelix on 30-October-07, 06:12:31
    Be aware that you have to keep an eye on shader clocks when oc'ing the gpu. With common tools you're oc'ing gpu and shaders at the same time. Since I'm suspecting a misproportion of gpu/shader clocks to be one of the reasons for problems with factory oc'ed Geforce 8 you should try with different combinations. With the latest Riva Tuner you can change 'em seperately without having to mod the bios.
    Memory is at it's end I suppose, that's the problem with most high end cards, no potential. Seems as you have to live with that.
    That's true for HD2900 series I think but as far as I know 8800GTX needs it even for stable working.
    Could be your psu is too weak, maybe really time for the new Corsair. On the other hand should be strong enough I guess.
    You're ungrateful! That good old 3500+ oc'ed so well and was once a real performer and you call him crap.... bad boy.
    "You're ungrateful! That good old 3500+ oc'ed so well and was once a real performer and you call him crap.... bad boy. "
    yes you are right the CPU perform great, but its just old..(is not CPU fault in direct sense )
    "Be aware that you have to keep an eye on shader clocks when oc'ing the gpu. With common tools you're oc'ing gpu and shaders at the same time. Since I'm suspecting a misproportion of gpu/shader clocks to be one of the reasons for problems with factory oc'ed Geforce 8 you should try with different combinations. With the latest Riva Tuner you can change 'em seperately without having to mod the bios."
    Yes im aware about it, but not this is the case.. i got instability even with 2Mhz on the GD more...SD remain @ stock 1350 and memory stock as well.. and go instability...
    Reversed story if i put everythink is stock, but +2Mhz more on the memory i got the same instability....
    "With the latest Riva Tuner you can change 'em separately without having to mod the bios."
    hmm nope here, its locked increasing GD clock inscrease SD clock as well. they are locked and increased in parallel.(etc, both in same time)
    "Memory is at it's end I suppose, that's the problem with most high end cards, no potential. Seems as you have to live with that."
    mem. chips used are for 1000Mhz the VGA stock, MSI is not OCed them.. so they must have potencial.. also VGA is adverted with DOT... at least its designed to handle till 5-6% OC, i have done few review(don't trust much here,but anyway its an info) and user opinion no problem to OC till 2100Mhz(1050). So i doubt that is memory problem.
    "Could be your psu is too weak, maybe really time for the new Corsair. On the other hand should be strong enough I guess."
    Yes that is the only conclusion which i can stuck at the moment... Good news is that i have talked with distributor today and they ensured me that will delivered tomorow for me. So tomorow i will know more about that mistery when i install the more powerful(and hope so great) PSU.

  • New project won't work!!!!!

    everytime i start a new project and i try and drag  a title square or a pic from the factory box(the map for example) it won't let me drag it into the project. it just keeps going back to its original spot. it does the same with the music and everything. it won't let me drag anything into the project. i have tried deleting it and starting a new project. i just keep getting rejected. Can you please help me with this. its geting so annoying. I also just updated the Imovie along with OS X. PLEASE HELP!!!!

    Premiere
    It is important to let us know what version of Premiere Elements you are working with and on what computer operating system it is working.
    In this case, I know instantly what version you are using by the description of your issue - it can be no other than Premiere Elements 13 and its new Shake
    Stabilizer.
    In order to use the Shake Stabilizer in Premiere Elements 13, the properties of the file to be stabilized must match the description of the project
    preset.
    Do you have an assortment of formats on that Timeline? If not, then you (manually) or the project (automatically) has set the wrong project preset
    to match the properties of your one and only source media format.
    For further information, please see Item 0002 in the Premiere Elements Daily Discoveries blog.
    http://www.atr935.blogspot.com/2014/09/premiere-elements-13-daily-discoveries.html
    Please let us know if you are OK with the information above. If not, please do not hesitate to ask questions and to ask for clarification.
    Thank you.
    ATR

Maybe you are looking for