New prompt to upgrade Live Street View which I recently downloaded to replace Google Street View lost with my IOS6. There's 35 pages of TOA. has anyone tried the upgrade

Recently downloaded Live Street View to replace Google Street View lost in IOS6 "upgrade." It's OK, but images are 3" & don't zoom. Today I received a prompt to upgrade Live Street View, but it is preceded by 35 pages of TOA from Apple. I'm suspicious of trusting Apple (again) and agreeing to their terms. Current version of Live Street View isn't ideal, but its still better than what I was left with pre-IOS6. Has anyone done recent upgrade to Live Street View and is it any better than before?

I suspect you have the debug version of Flash Player installed. Can you visit this page to verify that debug = yes?
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_Flash_Play er_version_type_and_capabilities__Flash_developers_only_

Similar Messages

Has anyone tried the new MS Oracle DataProvider ?

Hi all.
Has anyone tried the Microsoft issued Oracle .Net data provider? I am not fond of switching horses in midstream (have been struggling with ODP for a few weeks). I do not like the ODP for these reasons...
1) Documentation is really non-existant/useless especially where hueristics and 'gotchas' are concerned
2) it is a HUGE install (why I have no idea)
3) some things simply do not work (like my recent rants on trying to return varchar2's from stored procs and functions).
Is the MS any better ?
Thanks

Hi,
1) There is a pdf doc and integrated help which comes with the ODP.NET. There are a few gotchas which could cause some hair-pulling moments. Sometimes it helps to read the same doc several times to really know what to do.
But instead of wasting time reading the doc, the samples cover most of the typical cases. (i think it includes your varchar2 output bind case).
2) The huge install is due to Oracle Client 9. The provider needs several dlls beyond Oracle.DataAccess.dll and OraOps9.dll. There are some other oracle standard dependencies also. MS provider for oracle will have the same issue (I think they need oracle client install also).
There a few post where the `Instant client install` is going to solve that.
But the thin client (like JDBC thin driver for oracle) is still (IMHO) the best solution for the huge install problem.
3) See my reply in the other post. (try the sample also)
Finally, which some other posters have mentioned before: Good luck looking for help for MS's provider when you are stuck.
Arnold

Has anyone tried the new retina display MBP with a projector?

I bought a new MacbookPro with retina display online the other day (hasn't arrived yet). I use this primarily for business doing presentations etc. Has anyone tried connecting a projector using the Thunderbolt VGA adapter? Just curious if it'll work.
Thanks

Similar problem. I used my macbook Pro Retina with my Thunderbolt to VGA adapter all through the fall, and never had any trouble with it. Just before Christmas I got a Thunderbolt display.
Since that time, whenever I connect the projector, I get a black screen. I can see and move the mouse, but nothing else. Other computers still work with the projector.
I'm not certain if the Thunderbolt Display has anything to do with this or not, but it's just the timing that it happened.
Grateful for anyone that can offer help!

Has anyone tried to upgrade windows 8 to 8.1 on mBPR via Windows store?

Hello,
Windows 8 is installed on the Mac Book Pro Retina Late 2013 (top configuration) via Boot Camp.
When i try to run the upgrade via windows store it reaches 89% and when it is on the "preparing for restart" stage update fails.
It reports that it couldn't install and gives this error: 0x80004005.
All Windows Update updates are installed.
Tried to go through many windows support communities and found that it could possibly be linked with primary partion being OSX and not Windows.
Unfortunatelly primary partion always remains OSX and it is controlled by Bootcamp in windows enviroment.
Would appreciate if someone can share with his experience of resolving this?

I've installed windows 8 preview with an acer T230H touchscreen.
I will not install it on the libretto.
The bulletin board is much more intuitiv and flexible than metro.
I'm missing touch flicks on windows 8.
There is missing a start button.
It's for only one screen.
With two screens you have to work differently:
- one screen for the desktop
- one screen for the boards
It's difficult to get applications from metro to the desktop. You can not make photos or videos or snippets. You can not turn the picture or resize them. There is only one board. I don't know how to add weblinks on the metro side. You lose mach time by switching the desktop to metro.
Im waiting for an update of the bulletin board instead of windows 8.
The libretto has a good combination of a Desktop Computer and a smartphone. Windows 8 is neighter a good desktop nor a good board for apps. Neighter Metro nor the Desktop are complete.
Please tell toshiba to upgrade the bulletin board!!! It has much potential and should be opened with an SDK for external extensions and applications.

Has anyone tried the new OWC 8 GB RAM?

Anyone? They're still a little pricey for me.

I've just received the Quicken version for Lion and it crashed on four of my five files. The 5th file didnot show all the quotes. I searched the web and found that the new version is having problems with the Quote file. I tried the suggestion from Intuit. See following URL.
http://quicken.intuit.com/support/help/quicken-mac-2007-for-lion-crashes-on-lion /SLN59495.html
With the above you loss all your security quotes and need to repopulate the data file. I suggest that you try the following process on a Snow Leopard system.
To avoid a corrupt Quote file perform the following before moving to Lion. This process will give the Lion version a fresh Quote file.
1. Start Quicken with you data file
2. Open File > Export > Selected Items to QIF...
3. Check only the box for Securities
4. Quick Quicken
5. Hold down the Control key and single-click (or right-click) your data file
6. Select Show Package Contents from the pop-up menu
7. Control + click on the Quotes file, select Move to Trash
8. Start Quicken with you data file
9. Open File > Import > From QIF...
10. Quick Quicken
Now all my files run on the Lion version with all the quote values.

Has anyone tried the new Netscape browser 9.0

I am using it now and I do have to say I love Safari but without anymore updates for it and it freezing on some web pages it is looking more like Netscape may be my replacement . Safari is best by far from the others in being smooth and blend so well with the OS . Opera, Camino , Firefox , and iCab all are good but some are just to buggy or hog up the resources or are like just a patch of a browser . Netscape is smooth in scroll , web page rendering and just looks great and is fast . What do you think.

Instead of Netscape, you should try it's almost identical twin, SeaMonkey. SeaMonkey used to be called the Mozilla Internet Suite, from which the recent versions of Netscape are based. The difference is that there is no Netscape branding, and it's updated more frequently. Otherwise, they look and work the same. It even uses the same user files from the same location.
http://www.mozilla.org/projects/seamonkey/
I've been using the Safari 3 beta. The most recent update is pretty solid. As an alternative I use Camino. There are some web sites that specifically look for FireFox or IE, so I keep FireFox in the mix for that purpose.

Anyone tried the new BIOS 1.4 for K8N Neo4 Plat?

Has anyone tried the new 1.4 BIOS for nVidia K8N Neo4 Platinum? Does it fix the 220Mhz bug? Does it worth it at all? I am currently with ver.1.1 and running at 2453Mhz at HTT=4, Multi=11, FSB=223, V.Core 1.375v +3.3%, Memory 2.7v at 2-3-3-6-1T
AMD 64 3500+ Winchester
K8N Neo4 Platinum
Corsair Twinx 2x512
NEC ND-3520a
Sapphire Radeon X850XT
Enermax 485W
WD Raptor 74GB

Bios 1.4 Final Works fine on my system....
HTT=2, Mult=11, FSB=237, VCore 1.425 + 9.9%, Memory 2.8V at 2.5-3--3-7-2T 4x 512 (2 x 512 Corsair C2Pros)+(2 x 512 Crucial Ballistix Tracer) 2 Gig Total....
Psygnosi

Anyone tried the new Weblogic Scripting Tool (WLST)?

Has anyone tried using the new WebLogic Scripting Tool (WLST) that was recently
posted on the dev2dev WebLogic Utilities site: http://dev2dev.bea.com/resourcelibrary/utilitiestools/adminmgmt.jsp
It looks to be a handy tool that is built upon jython and enables you to easily
navigate, inspect and manipulate the WebLogic MBean tree on a running server.
It also has a nice scripting tool which allows you to convert a config.xml file
into a script that can be run to recreate a domain or specific resources within
the domain. This is exactly something I have been looking for because we occasionally
recreate domains or subsets of a domain for testing and POC purposes.
The utility is fairly well documented and works well for the most part. The only
issue I have run into so far is that is does not seem to understand JMS Distributed
Destinations. When I try to convert a config.xml that contains a DD to a script
it throws a null pointer exception. I have not tried a cluster yet.
I noticed the utility was authored by someone at BEA. Is there potential that
BEA will support this in the future if it catches on? Has anyone had experience
with WLST or jython that would cause you to reccomend (or not) using it?
Thanks.

Darryl,
Thanks for the valuable feedback. My comments are inline.
Darryl Stoflet wrote:
As a fairly long time wlshell user who recently started testing wlst there are
few features I have found lacking in wlst.
1. For monitoring purposes I am frequently using the -g and -r options to wlshell's
get command for graphing and repeating respectivelyI haven't looked at -g and -r options in wlshell, but will do so.
Although there is no graphical monitoring of attributes in wlst, but
there is certainly some monitoring capability (which will be enhanced
further in the coming version). Please take a look at the
monitorAttribute() function.
wls:/(offline)> help('monitorAttribute')
Description:
Monitors the specified attribute every by polling every interval.
Syntax:
monitorAttribute(attributeName, interval, monitorFile)
attributeName = Name of the attribue that you would like to monitor.
interval = Time (in seconds) to wait before the next fetch
monitorFile=[optional] File path where the monitored data will be
written to.
Example:
wls:/mydomain/runtime/ServerRuntimes/myserver/ExecuteQueueRuntimes/weblogic.kernel.Default>
monitorAttribute("ServicedRequestTotalCount",10)
Press Return to quit monitoring
Monitoring started for attribute ServicedRequestTotalCount
wls:/(offline)>
>
2. wlshell 2.0 adds the option when connecting to the admin server to also connect
to all managed servers in that domain. This is a nice feature for monitoring because
you then have access to all the runtime mbeans in each managed serverYes, this indeed seems to be a very nice feature. We will consider this
for our next release.
>
3. There is not a good way to pass cmd line options(variables) to wlst. In wlshell
I can send cmd line options via -v. I have tried something similar with wlst using
-loadProperties but this is a little laborious because I do not necessarily want
to create a properties file when a passing in only one or two variables. Also
I find loadProperties lacking somewhat (see 4 below)ok, I just realised that there is indeed a bug in wlst where the command
line arguments are not being honored. In Jython one can access the
command line arguments from the sys.argv variable. For example,
java weblogic.WLST -i foo.py var1 var2 var3
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to Weblogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> print sys.argv
['foo.py', 'var1', 'var2', 'var3']
wls:/offline>
But this isn't working properly, please keep using the loadProperties
untill this has been fixed.
>
4) loadProperties treats all created variables as strings. While this is understandable
from the perspective that getProperty returns a string, it would be nice if wlst
was smart enough that when a property is numbers only its an int, otherwise a
string etc.
wlshell does this logic/conversion for you which really simplifies calling methods
that expect the particular datatype. To get around this problem you can create a script file say,
variables.py which would look like,
# variables that will be used
theInterpreter.set('var1',10)
theInterpreter.set('var2','i am a string')
java weblogic.WLST variables.py
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to Weblogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/(offline)> print var1
10
wls:/(offline)> print var2
'i am a string'
>
5. I'd like to be able to send cmd output etc to a file while running within wlst.
In wlshell its a simple as adding >> filename to the end of the command. In wlst it is not as simple as doing >>, it is more than that. You can
choose any output stream to direct your output to. In your case you can
create a FileOutputStream and route the output to this stream for any
particular command.
Example,
# create a file output stream say fos
from java.io import FileOutputStream
fos = FileOutputStream("output.txt")
# save the default output stream to a variable to
# switch it back
sys.stdout=fos
# Now all output for any function will go to output.txt
ls()
cd('foo')
# after done with your functions switch it back
sys.stdout=origOutput
This is the right Jython way to do it. This works for all output streams
, very useful when you embed an interpreter in a servlet and would like
to display the output via a PrintStream etc.
>
>
All in all wlst is a nice tool. Personally if the above features were added it
would be much easier to transistion to wlst for good.
Also I really like the wlst offline tool. Its nice to be able to do the whole
create and configure domain process with one tool. Will this be supported. Yes indeed. We are working on merging both the tools into one.
I do
not want to rely on it too much if it will not work in future weblogic versions.It will be supported in future release of weblogic.
Thanks,
-satya
>
Thanks,
Darryl
"Steve Hess" <[email protected]> wrote:
Hello,
I am the BEA Product Manager behind WLST.
WLST, as it appears today on dev2dev, is an early release version of
a tool that
BEA does intend to support as part of our next major release. We decided
to issue
early versions of the tool because of the demand for a supported scripting
solution,
and to generate feedback from our user community. I encourage you to
work with
WLST, and assure you that this tool represents our current direction
in management
scripting.
Also note, this newsgroup can be used to issue questions, concerns and
feedback
about WLST. The engineering and PM team will monitor this group and
respond to
your questions as quickly as we can. While we will not be able to respond
to
every feature request, we really value your suggestions, and will endeavor
to
improve the tool in ways that meet your real-world needs.
Cheers,
Steve Hess
Director, WLS PM
"George Lupanoff" <[email protected]> wrote:
Has anyone tried using the new WebLogic Scripting Tool (WLST) that was
recently
posted on the dev2dev WebLogic Utilities site: http://dev2dev.bea.com/resourcelibrary/utilitiestools/adminmgmt.jsp
It looks to be a handy tool that is built upon jython and enables you
to easily
navigate, inspect and manipulate the WebLogic MBean tree on a running
server.
It also has a nice scripting tool which allows you to convert a config.xml
file
into a script that can be run to recreate a domain or specific resources
within
the domain. This is exactly something I have been looking for because
we occasionally
recreate domains or subsets of a domain for testing and POC purposes.
The utility is fairly well documented and works well for the most part.
The only
issue I have run into so far is that is does not seem to understandJMS
Distributed
Destinations. When I try to convert a config.xml that contains a DDto
a script
it throws a null pointer exception. I have not tried a cluster yet.
I noticed the utility was authored by someone at BEA. Is there potential
that
BEA will support this in the future if it catches on? Has anyone had
experience
with WLST or jython that would cause you to reccomend (or not) using
it?
Thanks.

Has Anyone tried this new plug in WooWave Sync Pro?

Hi there
Has anyone tried this new plugin Woowave Sync pro?
They claim to offer better results than you can get with the built in synchronizing engine.
I downloaded the trial but can't figure out how to enable it in fcp.
I got this crappy footage.. hours of it and I really need something to sort it out , hate manual syncing
fcp tries and does some of it, but I got hours left unsynced.

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

I upgraded to Mavericks and its running on my 2010 27" i mac. The Keynote, numbers, pages and mail ups have not changed. Has anyone had the same problem?

I upgraded to mavericks and it seems to be running ok. However, my keynote, pages, numbers and mail still look the same. The update section on the APP store tells me they have been intalled but that is not the case. Has anyone experienced the same issue?

You have to download them from the app store. They should come up under the update option if you already have the iwork apps. They are available for free (thanx apple) if you go to the store after installing Mavericks and select them.
Now don't be thrown off because the link (icon) in the dock is the same. There is a updated icon for each app. I got thrown off because I had purchased ilife before the app store and back then, all would go into a folder (iWork '09). I could launch the old apps from the 09 set even after I installed the new ones from the app store. Some of us find this a godsend as the options on the new apps are lacking some power options.
Download the new apps and just pull the old icons off of the dock and watch them going up in a puff of smoke!

Has anyone modified the new AV video cable yet?

Specifically I want to get video on my Pioneer avic-d3, which has a 4x6 inch screen. It can play ipod gen5 videos but not gen6 (iphone).
My idea is to splice a new AV cable with the existing ipod cable somehow to then route the video to the AV1 component in on the Pioneer. Has anyone tried this yet or reverse engineered the cable yet to see which pins are what?
The easy option would be to just have 2 places to plug in my phone (2 cables) and just switch it as needed, but that seems very primitive. An alternative solution would be some kind of Y cable where my Iphone hooked into 2 cables.
Message was edited by: sometech

I am not sure that I understand the problem.
Can you simply connect the iPhone component cable connections to your AV1 component input on the Pioneer? If not, can you describe your goal with more detail.
Video cables are susceptical to noise - thus any "splicing" is likely to cause problems. Further, the Apple AV cable reportedly contains a chip which enables the iPhone for video out.

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?
If Yes, How is It?
This seems from what I've read at least to be a good or even great overclocker, It's too bad that It isn't a full ATX motherboard, Maybe If sales are good enough MSI will use this chipset on a Full size ATX motherboard one day. Of course It does have an Integrated ATI video card in It and It have as much as 128Mb ram for the pci-e built-in video or You could add a separate pci-e video card in the 16x slot. It's $94.00 right now on pricewatch.com of course.
http://www.msicomputer.com/product/p_spec.asp?model=RS480M2-IL&class=mb

Quote from: mamisano on 23-February-05, 12:27:21
Ordered one for a home workstation from ZipZoomFly.com. Also picked up a 3000+ and already have 1GB of Adata PC4000. Will be utilizing onboard video until I have the need/desire to upgrade to PCI-Express video card. Hard drive will be a new Maxtor 250GB ATA-133 16MB Cache that I picked up from CompUSA for $99/no rebates :D
I will post my thoughts after the system is together, should have parts by Thursday/Friday.
Well at least You aren't buying from Logic Circle Systems That place will ship incompatible ram that is Intel approved and say then It is You cpu that is at fault, I should know I'd bought zoom3's motherboard and some Wintec ram(Samsung chips ending in TCCC) and They said they were tested and AMD approved(They aren't, Wintrec is Junk on an AMD Platform), I now have a Corsair CMX512RE-3200LL Dimm and My cpus work fine at PC3200 speeds and above, Logic Circle Systems said was at fault. Logic Circle Systems is a bunch of Liars and are not trustworthy.

Has anyone installed the new firmware?

Has anyone installed the new firmware yet? And have you noticed any issues with it? I'm weary of installing Apple's firmware updates after how terrible the last one was (I'm sure everyone remembers the hdd hangs). Also, Apple's trackpad update was terrible as well for the first few weeks it was out.

Because I was one of the users affected last time.
http://discussions.apple.com/message.jspa?messageID=10416721#10416721
Not just a tiny amount of people. Lots of people had this issue. Firmware downgrade is what solved it, until Apple released an upgrade of the upgrade. I just wanted to check if anyone was having issues with this firmware before I upgraded.
And I'm not sure why people are getting so offended. It's a simple question of "did upgrading to the new firmware screw up your computer", and requires a yes or a no answer. The last two times I installed an update it messed with my computer, so it makes sense for me to be weary. You would be as well if you were in the same situation. And I have not yet heard anything about this firmware, but I haven't had time to check out what people have said. I'm in med school and I'm usually fairly busy.

I upgraded my iMac to Mountain Lion and now my Canon Pixima MP500 will not open because PowerPC apps are no longer supported! Has anyone experience this problem?

I upgraded my iMac to Mountain Lion and now my Canon Pixima MP500 will not open because PowerPC apps are no longer supported! Has anyone experience this problem?

Correct. Applications designed to run on the old PPC Macs (which Apple stopped making in 2005) cannot run on Mountain Lion.
You need to update your printer driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

New prompt to upgrade Live Street View which I recently downloaded to replace Google Street View lost with my IOS6. There's 35 pages of TOA. has anyone tried the upgrade

Similar Messages

Maybe you are looking for