New prores presets - still just mono or stereo

I have just tried the new prores presets, to find out, if adobe changed the audio-export-limitation:
Question:
Will the endcoder now be able to encode a, let’s say, XDCAM HD 422 Clip to Apple pro Res including the 4 (or more) mono audio tracks?
I was waiting for that for a long time.
The answer is:
NO, it still is not possible to encode more than one single mono or stereo audio track. Just with MXF you have this choice (4 and more tracks), not with any of the other codecs. 
I just don´t get it - what is it, that makes it impossible for adobe to solve this problem? 
Regards,
Philipp

Unnecessary? Well... Depends pretty much of what you´re up to, doesn´t it? Video editing for Youtube: stereo is quite enough. But Broadcast?
Allways funny, when this topic comes up in the adobe world. You may call it "native-Philosophy", I think it´s not much better than apples fcpx-Philosphy (which is: it´s for the masses, not the pros): With dozens of codecs on board, there is only one way to export a clip with more than one single mono track (or stereo) - that is via the mxf-wrapper.   

Similar Messages

  • My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but looks ok. Help?

    My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but it is all set up as it should be. Is there anything I've missed or could try? Thanks

    Try the following:
    In Finder, select the problematic volume and then press command-I.
    Expand the Sharing & permissions section if it's collapsed.
    If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
    Tick/check Ignore ownership on this volume.

  • HT1414 Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

    hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

    Hi When  you change your iPad, even if its off it will, turn on when you connect, to charger Check  lightining port for any bits. Do a Reboot press &hold power button & menu button hold both down until you see Apple Logo This may help. Cheers Brian

  • After restoring from backup on a new phone (same model, just replacement) all my apps are showing as waiting....I have sync'd but still without any joy - this has been going on for hours

    After restoring from backup on a new phone (same model, just replacement) all my apps are showing as waiting....I have sync'd but still without any joy - this has been going on for hours

    It just means some spammer is using your email address as the sender address for their spam. This is very easy to do - anyone can do it simply by changing the From email address in their email program. It does not mean your account was hacked or you have a virus (there are no current Mac viruses on the loose anyway, nor has there been for years).
    There's nothing you can do about it. It can happen to anyone and the spammers will move on to using someone else's email address before long.

  • ProRes presets for Media Encoder CC now available for download

    Hi everyone,
    We have new ProRes output presets available for Media Encoder CC. You can download the presets here
    While the new presets do not add new functionality to Media Encoder, they do provide added convenience. By definition, these presets are for use on Mac OS. If you are on Mac OS X 10.8, or 10.9, the ProRes codecs come installed with your operating system. If you are using Mac OS X 10.7, you will need to install one of the Apple Pro apps (Final Cut Pro, Motion, Compressor, etc.) for the presets to function correctly.
    Here’s what’s new with the Media Encoder CC ProRes presets:
    Preset names have been updated to say "SD" (instead of “DV")
    The Field Order of PAL SD presets changed from "Lower" to "Upper"
    Frame Size of NTSC SD presets changed from 720x480 to 720x486. This is based on Apple's ProRes specifications. If 720x480 versions are needed you can create your own User presets with these settings.
    Enhanced support for multi-track audio sources. New "Audio Track Layout" and "Channel Layout" sections let you specify the number of exported tracks, track types (single track, dual mono, or stereo pairs), and channel mapping for 5.1 audio
    Please note: the ProRes presets should only be installed on AME CC (7.x). They may not work correctly in AME CS6 or earlier versions.
    If you have any questions, please let us know.
    Eric

    Hi Eric,
    Much appreciated, but I was wondering when we might expect a framerate and resolution independent way of transcoding media?
    Sometimes (as in most of the time) I don't really care about changing resolutions or retiming anything, I usually just have a pile of media that I would like to conform to a single codec, independent of framerate or resolution, like at this very moment.
    Right now I need to transcode 100+ clips in various flavors of h.264, mp4, and animation codec in order to get this media into Resolve.  I don't want to have to specify different framerates and resolutions, I just want them transcoded to ProRes.
    The presets are nice, but the ability to do what I'm needing would greatly reduce the need for presets like these.
    Thoughts?
    Thanks!
    Message was edited by: Graham Hutchins, added a line.

  • Change Mixdown from Mono to Stereo

    I'm sorry if this has come up previously but I coudn't find anything that exactly related to my situation.
    First let me say I bought CS5.5 about two years ago and after trying it a few times, I found I did not like all the "missing functions like Group Tracks and the fact that it seemed to work slower than my old 1.5.
    Recently I decided to give it another try and be  patient. I had to assembe two VOs with SFX and various production music beds. When I was happy with the mix, I was ready to do a mixdown...only to discover that my mixdown was in Mono. Mono? I tried to find where to convert it to stereo. After searching help and then this forum, it appears that there is no way to choose Strero or Momo....except apparently only when initially naming the Multitrack session. SAY IT AIN'T SO!!!    Does this mean I have to start all over with a new session file and spend all that time again?   If this is so, WHY would they remove the option to mixdown in Mono OR Stereo which seem so common sense and was an option in previous Audition versions.  I never understood software developers who seem to want to take away functions that worked.
    Am I wrong? Is there any way to choose or change a mixdown in a session? I like choice. Choice is good.
    Cheers
    RoosterKoop Ken

    For clarity's sake, a stereo track with audio on one side is still a stereo track, not a mono track.  So you're not really changing mono to stereo, you're just routing the active channel to fill both left and right sides.  There are a number of ways to do that.  I like #3 myself.
    Larry Jordan - Premiere Pro CS6: Isolate Audio Channels | Final Cut Pro Training & Classes

  • Mono to stereo or combine audio

    I have an iMovie that is an electronic white board. I recorded an audio file from my Nikon (so I would think it would be stereo) and added that to the whiteboard video. I've been told the audio is mono, but I don't know how to verify that or how to correct it. 1. How can I tell if the audio track is mono or stereo? 2. If it is mono can I convert it to stereo or play it as mono on both tracks to simulate stereo? Thanks.

    Hi
    In iMovie You can not do any of it.
    But You can
    • From Event's - iPhoto Videos take it and drop it into a new Project
    • From Project You export it as QuickTime and as Audio only (.aiff)
    • This file You can open in an Audio/Sound-Editor as Audacity (free on Internet) or GarageBand ( might work ? )
    And here in e.g. Audacity You can see if the Right and Left track are identical = MONO or have slight differences. I do this by invert one track and add it to the other - if it is silent - then the tracks are in Mono if not then You've got a Stereo Sound from start.
    Mono to Stereo = Impossibly
    Mono out via Left and Right speaker - Just copy the audio in one track and paste it into the other - BUT still when You listen all will come from center. Simulated Stereo - I've never seen any working application that can produce this.
    When done in Audacity - then Save (still as .aiff) and import this to Your Movie project.
    Far from so easy as in FinalCut Pro. Where You just pan audio to the other canal.
    Yours Bengt W

  • Are iPad and iPhone built in microphones mono or stereo?

    That's my question.

    He assumed that you were hoping the mic would be stereo. As I said, though, for most use cases, a mono mic is just fine (or even better). What use do you have in mind. The only situation in which a stereo mic would be better is if you're going to record a stage or room full of musicians playing. If you're recording voice memos, or even recording yourself playing a single instrument, a stereo mic is unnecessary.
    That said, we still haven't completely resolved whether the built-in mic is mono or stereo. The tech specs on apple.com don't specify, but I am 99.9% certain that it is mono.

  • Premiere Pro CS6 Creative Cloud & ProRes presets

    I am using the Atamos Ninja 2 to capture footage from my Canon 5D Mark III. One of the options on the Ninja 2 is to capture using the ProRes HQ codec. I'd really like to be able to take the ProRes footage and use Premiere Pro CS6 (creative cloud) on my MacBook Pro (10.8.3). Is there any way to do this? I don't see ProRes presets available. I can import the footage, but can't drag and drop it into the timeline.

    Joe Bloe,
    Thanks. Here's what's interesting that I don't understand. I did what you pointed out previously. That works from a functionality perspective...sort of.
    I originally captured at 30 fps (drop frame 29.97) on the Ninja 2 because of what I understood here:
    http://atomos.activehosted.com/kb/article/codecfrres/when-should-i-use-24p
    When I used the technique you described, the sequence settings were the same technically. But the editing mode listed is ARRI Cinema. There are still no presets I can see for ProRes. I'm not sure if the sequence that resulted from the steps you described are taking advaantage of the ProRes codec. And since I don't see any presets anywhere in PPro for ProRes, I'm still wondering how to get them in PPro.
    I've seen this too:
    http://blogs.adobe.com/VideoRoad/2011/08/a-prores-workflow-end-to-end.html
    But I don;t understand how, in the above instructions, the option to select Apple ProRes in the Video Preview setting is available. Is this a difference in CS6 from earlier versions?
    Btw, I have the latest version of Compressor (and Quicktime) installed so I should have the ProRes codecs available.
    I also downloaded the folder of ProRes codecs for AME and imported them that was available here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5411
    This still doesn't make the presets available in PPRo.
    What am I missing?
    http://blogs.adobe.com/VideoRoad/2011/08/a-prores-workflow-end-to-end.htmljoe bloe premiere wrote:
    When you create a new Project, you are initially presented
    with a menu of Sequence types to choose from.
    You can skip this step by hitting 'Cancel', import your media,
    then do this to create a Sequence that matches your footage:
    Or, select a media file, right-click and select "New Sequence From Clip".
    -Josh

  • Your experience with Modify Clip "Stereo" or "Mono as Stereo"

    Using CS5.
    When recording my project our audio was recorded externally.  I have all my audio tracks recorded as mono and I want to use all of the tracks as stereo.
    I found instructions on how to do it, but I have some questions.
    I highlight an unused audio clip on my project panel and then use Clip> modify > Audio channels.
    Among the choices are Mono, Stereo, Mono as Steeo and 5.1
    Since my clips are mono, I assume I should select "Mono as Stereo".   But is there a subtle difference to selecting "Stereo".?
    In addition, I want to fill both right and left tracks with the recording that was recorded in mono.  I would like to avoid having to use the audio effects fill right / fill left.  I assume using either "Mono as Stereo" or "Stereo" will fill both right and left tracks -- but, again, is there some subtle differences -- or best practices?
    Thanks
    Rowby

    Hi Jim,
    Just checked the "mono" track with my headphones -- and indeed you are correct. I hear it in on both channels.
    So nothing needs to be done.
    However, then, why does Premiere Pro have  these "features"?
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7f41a .html
    Thinking more about this, however, as I write this reply,I like putting a mono track directly above or below a stereo track -- and as you know, you can't put mono track into a stereo track (you have to create a new mono track, which is a minor pain) -- so that would be at least one reason to convert the mono to a stereo.....  I have to create a new mono track - and sometimes that track is far below the stereo track I want to mix it with.
    I also notice this article which implies you can make it so when you import any track (mono or stereo) into premiere it will be (based on your preference settings) "converted" to  mono, stereo, mono as stereo) etc.
    http://help.adobe.com/en_US/premierepro/cs/using/WSAB1EDD0E-ADC2-4a10-B399-E809E588618B.ht ml
    Rowby

  • Master mono or stereo

    I noticed, opening a new session in 6 tonight, that it says the master is mono.  Shouldn't the master be stereo by default?
    Next question: how do you know whether a given track in Multitrack is mono or stereo?  I don't see that information in the clip information window.

    Damn I think I tend to get lots of them 'idiot tracks' - just depends on the clients that come through the door
    Could it be Individual/Dual Input/Output Track (i.d.i.o.t)??
    @ therealdobro: But seriously - check where you have routed the master channel - maybe you sent it to a mono outout?

  • Turn Mono into stereo

    Hi guys, is there any possible way to turn the new nokia 3230 mono into stereo phone, please help if anyone of you knows please advise
    Thanks in advance
    EDIT: Removed personal detailsMessage Edited by ajak on 01-May-2007 08:44 PM

    whenever U open new message the cursor by default is on the address field on the top, after adding the recipient press the joy stick down, it automatically switches to Alpha mode with predicive text on. If you dont want predictive text just press "#" fast.
    There is one more way to do this, select "Menu" then go to "Settings" in the settings select "Phone" then in the Phone settings sub menu select "General" in the General setings scroll down to "Dictionary" press joy stick to switch it "On" or "Off".
    Hope this will help. If not there is always UR user manual Pls refer to it.

  • I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player.  I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

    I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player.  I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work.  I did everything I was to install it correctly but it still does not install it correctly.  Can some help me.  Bob

    Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
    You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
    http://www.etresoft.com/etrecheck
    It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
    Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
    Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

  • HT204266 I am trying to connect a blackberry playbook to the Mac.  I have OS 10.5.1 and it says I need OS 10.6.  Is that a free update or do I have to purchase a new OS?  I just want to load music on to the playbook.

    Trying to connect a blackberry playbook to the Mac.  It says I need OS6.  Is that a free update or do I have to buy a whole new operating system?  Just want to download some music to the playbook.  Also, is it possible to use a iTunes card directly to the playbook and bypass the Mac?  Thanks for any info you can provide.

    The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 or 10.8 is part of the 10.6.6 update.
    If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

Maybe you are looking for