New Proxy Setting Not Applying

We are applying a 2 part proxy GPO the computer part is applying but not the user part. We have unlinked and deleted the old policy from the OU but for some reason the old policy is still applying in the user policy. The only difference between the two
policy is the proxy info and the cert.
lipanitech | http://www.allamericancomputerrepair.com | A+,Network+,Linux+,Security+,MCTS,HP Pro

um...can't understand clearly...
-->We are applying a 2 part proxy GPO the computer part is applying but not the user part.
have enabled the loopback mode?
how you configure proxy setting? now, just old gpo still be applied? run gpresult, any clues?
Best,
Howtodo

Similar Messages

Group policy Preference - Internet Option setting not applying

Hi,
I’m not very sure if any of you have encounter this strange issue when
configuring GPP -> Internet option setting for window 7 IE9 or IE11.
The following
are spec of OS and IE version used in my environment.
Window Server
2012 R2 (IE 10)
Window 7 (IE9
and IE11)
Recently I
have deployed proxy setting via GPP as I do not have IEM under my GPMC console.
Once the setting is been configured and deployed, I have notice that the GPO do
not apply after the user login. The following scenarios is what we observed.
1) User boot up the machine, Login and proxy setting will not applied
1a) gpupdate /force -> Proxy Settings applied
1b) setting will be removed after the GPO refreshed
2) User boot up the machine, Login and proxy setting will not apply
2a) User logoff and login proxy setting applied.
2b) Setting will be removed after the GPO refreshed
Kindy advise
if there is any solution to ensure that the setting apply whenever the user
login and stay intact even after the gpo refreshed by itself.

Hi,
>>1a) gpupdate /force -> Proxy Settings applied
>>1b) setting will be removed after the GPO refreshed
Based on the description, we can run command gpresult/h report.html to collect group policy result reports to compare how the settings are being applied.
Besides, have we installed the following hotfix on the computers with IE 9? If not, we can try to install the hotfix.
Internet Explorer Group Policy Preferences do not apply to Internet Explorer 9 in a Windows Server 2008 R2 domain environment
https://support.microsoft.com/en-us/kb/2530309?wa=wsignin1.0
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

"Make proxy settings per-machine (rather than per user)" Group Policy setting not applied until login as a local Administrator

We want to deploy to all our desktop the pac file to configure proxy. We have a Windows 2008 R2 server, and i've enabled the GPO "Make proxy settings per-machine (rather than per user)", and i've add a registry key AutoConfigURL in "HKLM\Software\Microsoft\Windows\Current
Version\Internet Settings" with the pac file link.
I've tested on my pc, and all was configured without any problem. I've try to login to my computer with another user (without admin rights) and the automatic configuration proxy was compiled and not modificable. It's seems that all works.
But, our users are not local admin, so i've tried to deploy the GPO in a collegue computer. I've forced the update of GPO, checked on registry that all new keys are added, and i've reboot the pc. When i've check on IE settings, autoconfig URL was empty and
grey. I'm disconnected from user and i've login to the pc with a local admin. With my surprise, the IE settings was compiled. When i'm come bac to the user profile the IE settings was compiled and not modificable.
The problem is: i've over 750 users in 3 countries, and i don't want grant them the local admin permissions. How can i configure proxy settings via GPO without login to every machine at least one time?

> have a Windows 2008 R2 server, and i've enabled the GPO "Make proxy
> settings per-machine (rather than per user)", and i've add a registry
> key AutoConfigURL in "HKLM\Software\Microsoft\Windows\Current
> Version\Internet Settings" with the pac file link.
In the past, we experienced various issues with machine proxy settings,
so we don't use them anymore. The simple approach:
Block access to the connections page through ADM template settings and
deploy the proxy through GPP Internet Settings.
This is what we do (with a pac file, too), and it works well :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

New Project Setting not working?

Good Day, All..
I am not getting the expected results when activating one of the new Project Settings in 10.0.7.
The Setting is: "Control Change 7/10 controls Volume/Pan of channel strip objects"
It seems as though it doesn't matter if i use Automation -or- MIDI Draw. The results are still the same. The channel strip controls respond (not the channel strip's device).
Was especially hoping to use with Kontakt multi's.
Anyone know the proper procedure for getting this to responde as expected?
Thoughts / Observations ?
Thanks..... sls

Make sure you are dealing with CC messages and not Fader messages. If you create the MIDI automation and then change the setting preference it converts it from control to fader. Look in the event list to confirm. You'll also note two additional categories in the controller drop down of the piano roll inspector. The two (Vol/Pan Automation) are fader messages.

SCCM 2012 R2/MDT 2012 - Deploying Windows 7 UDI CustomSetting.ini setting not applying

I am using an MDT UDI task sequence to deploy Windows 7. The task 'Apply Operating System Image' has the answer file package and unattend.xml file in the correct location.
Within the CustomSetting.ini I have the setting SkipProductKey=YES but, during the deployment it stops on the product key page.
We do not need to input a key since we are using KMS. I did not have this issue in 2007 although I did not use a UDI task sequence. I'm sure I am missing something or it's not using the CustomSetting.ini for some reason or another.

Hi,
Go to http://licensing.microsoft.com. You could download the windows 7 (KMS) Version ISO.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Managed mouse setting not applying on clients

Hi,
I am trying to add right-click functionality on the mac clients in a couple of my schools.
I have added the .plist file to the Workgroup Manager Preferences pane for the groups as always managed.
When I log on as a user and open Mouse Preferences the right side is set to secondary button (as I want it to be), but the mouse will not right-click. If I check in System Profiler under Managed Preferences, it shows up correctly also.
The only way it will right-click is if I go into Mouse Preferences and manually select secondary button.
Any suggestions?

Can the servers get the other policies from MP?
Juke Chou
TechNet Community Support

Defaults not applying

I am setting up my own default settings for developments and then saving those as the new defaults. But when I open new photos the new defaults do not apply unless I press reset. For example, if I saved the saturation at +10 as the new default it is still at 0 unless I press reset. It means photos are not opening with my preferred settings.

Default settings are only applied when the images are first imported into Lightroom. Previews are created at that time. Whenever you "open" images that have already been imported, you are displaying that preview image that is only changed as you work on the image. As Rikk has stated, you are probably working on images that have already been imported. You will see those new defaults automatically applied when you import new images.

GPO not applied at all with build 9926

Hello,
I have a Samba 4 Active Directory Domain controler. My LAN is composed of XP and 7 computers ; everything works well.
I also have tested previous builds of Windows 10, and had no particular problem with Group Policies.
With build 9926, my GPOs are not applied at all. It seems there is a big change making Group Policies not applied / not reloaded when users log in. Here are step by steps what I have noticed :
0) At the very first log in, when I do a gpresult /V, i have a message saying something like "no rsop data for this user"
1) I performed a gpupdate /force
2) I performed another gpresult /V and then I got information about my GPO
3) I logged out and logged in with same user --> my GPO is applied
4) I modified my GPO to set new policy
5) I loggged out and in again --> old policies are applied but new policy is not applied
6) I performed gpresult /V --> new policy is not displayed
7) I performed a gpupdate /force and then a gpresult /V --> new policy appears
8) I loggged out and in again --> All policies, including the new one are applied
So it seems the GPOs are not automatically updated and applied when logging in, and I have to force them manually.
The good question is : WHY ? :)
Thanks
Will

Hi Will799114,
I tested this in my environment, it seems a restart would apply group policy successfully, but a sign out and sign in would not trigger this procedure.
Here I would suggest you post your feedback directly to our Feedback channel:
http://windows.microsoft.com/en-in/windows/preview-how-to#how-to=tab7
Alex Zhao
TechNet Community Support

May 25th Weekly Ad...GCU discount does not apply?

Why does the 20% off a new game purchase not apply to the weekly ad where you get $20 off a game with the purchase of watch dogs? Is there fine print that says the 20% discount excludes sale offers?

Hello guitarguy316 and friends,
Thank you for your interest in our Watch Dogs and select titles offer. New games are great, and extra discounts on games you've had your eyes on is even better still!
In researching this, it does appear that the discount should now be working with the offer price, but if this is not the experience for any of you, please let us know so we can look into it further.
Game on!
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

AppV5.0 sequencing a web app but App not applying IE proxy setting when published.

Hello all,
I am using AppV5.0 SP1 sequencer to capture a customized IE/Java 6.32 app. The capture of the Java install is great and works perfectly as well as the IE shortcut, my problem starts with the
IE proxy, I would like to get a dummy nonexistent proxy to prevent outside internet access (Outside access is locked down through the proxy). Every time I sequence the app I have the registry settings necessary to set a proxy setting under the AppV current
user registry settings, but when the app is published it's almost as if the system local or GPO applied settings overwrite the AppV sequenced settings.
What am I missing in these steps to have my sequenced proxy settings stay and not get overwritten by the system applied GPO?
Thanks,
Ron

Hello,
GPO always takes presedence.
See this blog-post to alter the default behavior;
http://packageology.com/2014/02/overriding-group-policy-settings-app-v/
Nicke Källén | The Knack| Twitter:
@Znackattack

Everytime I load upgraded Firfox 3.6.6 I get an error message saying the new version does not accept the proxy setting.

Every time I load the newest version of Firefox 3.6.6 it says it is not accepting the proxy setting. Since I've never had a problem like this, I don't know how to correct it.
== This happened ==
Every time Firefox opened

In Firefox 3.6.4 the default connection settings have been changed to "Use the system proxy settings".
See "Connection settings": [[Firefox cannot load websites but other programs can]]
You can find the connection setting here: Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select ''No Proxy''

UDI wizard is not applying TimeZone setting (MDT2013)

Hi All,
I am working on MDT2013 to create Windows7-64bit Image for OEM vendor. Note:- I am not using any SQL database.
I have customized the UDIWizard_Config.xml where it should ask for UIlanguage, Inputlocale and Timezone. I am calling this UDI wizard xml in Tasksequence after gathering locally here the problem is after completing the build its not applying the Timezone
setting in image.
Any one aware about this issue? why UDI wizard is not applying the Timezone setting in image?
I have attached the below UDI wizard XML. please answer and ask if you require any more details..
<?xml version="1.0" encoding="UTF-8"?>
-<Wizard>
-<DLLs>
<DLL Name="OSDRefreshWizard.dll"/>
<DLL Name="SharedPages.dll"/>
</DLLs>
-<Style>
<Setter Property="bannerFilename">UDI_Wizard_Banner.bmp</Setter>
<Setter Property="title">Operating System Deployment (OSD) Wizard</Setter>
</Style>
-<Pages>
-<Page Name="WelcomePage" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
-<Fields>
-<Field Name="WelcomeText" Summary="" Enabled="true">
<Default> Welcome to the Deployment Wizard. This wizard will walk you through a series of screens that will allow you to choose Language type. Click on the 'Next' button to start your selected language pack installalation. Please allow 1 hours for installation. If you need support during this process, please e-mail your system administrator. </Default>
</Field>
</Fields>
</Page>
-<Page Name="ConfigScanPage" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
-<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
<Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
<Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
<Setter Property="readcfg">$LogPath$\OSDSetupWizard.xml.app</Setter>
<Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
<Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
<ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
<ExitCode Type="1" Text="One or more warnings were encountered (nonfatal) while running App Discovery. The appropriate applications may not be selected." Value="1" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Get Printers">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSD_GetPrinters.vbs /xmlout:%temp%\PrinterList.xml;$LogPath$\PrinterList.xml</Setter>
<Setter Property="BitmapFilename">images\Printers.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="1" Text="Output filename not specified correctly." Value="10" State="Warning"/>
<ExitCode Type="1" Text="Unable to create output file." Value="20" State="Warning"/>
<ExitCode Type="1" Text="An unknown error has occurred." Value="*" State="Warning"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="CheckSMSFolderOnUSB">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\CheckSMSFolderOnUSB.vbs</Setter>
<Setter Property="BitmapFilename">images\USB.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Please disconnect any USB Drives at this time, cancel the wizard, and start the task sequence over." Value="*" State="Error"/>
<Error Type="-1" Text="The path not found" Value="2" State="Error"/>
<Error Type="-1" Text="The file not found" Value="3" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
<Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Drive Encryption">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDBitlockerState.vbs %systemdrive%</Setter>
<Setter Property="BitmapFilename">images\bitlocker.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="1" Text="Drive is fully encrypted. Encryption will be paused during deployment and resumed." Value="1" State="Warning"/>
<ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="4" State="Warning"/>
<ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="5" State="Warning"/>
<ExitCode Type="-1" Text="Drive is currently encrypting. Please fully encrypt or pause encryption to continue." Value="2" State="Error"/>
<ExitCode Type="-1" Text="Drive is currently decrypting. Please fully decrypt or pause decryption to continue." Value="3" State="Error"/>
<ExitCode Type="-1" Text="A script error was detected. Please contact support to continue." Value="*" State="Error"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="ConfigScanBareMetal" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
-<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
<Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
<Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
<Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.PrestageDriveLookupTask" DisplayName="OEMMedia Lookup">
<Setter Property="BitmapFilename"/>
-<ExitCodes>
<ExitCode Type="0" Text="Success" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Error" Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
<Setter Property="readcfg">%OSDDataSourceDrive%\%OSDDataSourceDirectory%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
<Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
<ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
<ExitCode Type="0" Text="AppDiscovery exited with success as Application matching information is not available in Windows PE." Value="1" State="Success"/>
<ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="RebootPage" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
-<Fields>
-<Field Name="RebootText" Summary="" Enabled="true">
<Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
</Field>
</Fields>
</Page>
-<Page Name="WelcomePageReplace" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
-<Fields>
-<Field Name="WelcomeText" Summary="" Enabled="true">
<Default> Welcome to the Replace Wizard. This wizard will walk you through a series of screens that will allow you to customize your data and settings for USMT. After you have entered the information, the wizard will begin USMT. Click on the 'Next' button to start. Please allow 2 hours for USMT. If you need support during this process, please e-mail your system administrator. </Default>
</Field>
</Fields>
</Page>
-<Page Name="VolumePage" Type="Microsoft.OSDRefresh.VolumePage" DisplayName="Volume">
-<Fields>
<Field Name="Image" Summary="Image Selection:" Enabled="true" VarName="OSDImageIndex"/>
-<Field Name="Volume" Summary="Volume:" Enabled="true">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">There are no volumes available for installing the OS.</Setter>
</Validator>
</Field>
<Field Name="Directory" Summary="Windows Directory:" Enabled="true"/>
<Field Name="Format" Summary="Format:" Enabled="true" VarName="OSDDiskPart"/>
</Fields>
<Setter Property="MinimumVolumeSize">10</Setter>
<Setter Property="FormatWinPE">Partition and &format disk 0.</Setter>
<Setter Property="FormatFullOS">&Clean the selected volume.</Setter>
<Setter Property="FormatWinPEWarning">WARNING: Choosing this option will repartition and format disk 0!</Setter>
<Setter Property="FormatFullOSWarning">WARNING: Choosing this option will delete all data on the target volume!</Setter>
-<Data Name="ImageSelection">
-<DataItem>
<Setter Property="DisplayName">Windows 7 RTM (x86)</Setter>
<Setter Property="Index">1</Setter>
<Setter Property="Architecture">x86</Setter>
<Setter Property="ImageName">Windows 7 RTM Images</Setter>
</DataItem>
</Data>
</Page>
-<Page Name="UserRestorePage" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
-<Fields>
<RadioGroup Name="LocationGroup" Locked="false"/>
-<Field Name="TargetDrive" Enabled="true" VarName="">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
</Validator>
</Field>
-<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No valid network share.</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
<Field Name="NoDataRadio" Enabled="true" VarName=""/>
<Field Name="LocalRadio" Enabled="true" VarName=""/>
<Field Name="USBRadio" Enabled="true" VarName=""/>
<Field Name="NetworkRadio" Enabled="true" VarName=""/>
</Fields>
<Setter Property="NetworkPassword"/>
<Setter Property="NetworkUsername"/>
<Setter Property="DataSourceText">Please select a location where user data will be captured and/or restored.</Setter>
<Setter Property="Format">disable</Setter>
<Setter Property="FormatPrompt">disable</Setter>
<Setter Property="MinimumDriveSize">10</Setter>
<Setter Property="State">Restore</Setter>
<Setter Property="NetworkDrive">n:</Setter>
<Data Name="Network"/>
</Page>
-<Page Name="ComputerPage" Type="Microsoft.OSDRefresh.ComputerPage" DisplayName="New Computer Details">
-<Fields>
-<RadioGroup Name="DomainGroup" Locked="false">
<Default>Workgroup</Default>
</RadioGroup>
-<Field Name="ComputerName" Summary="Computer Name:" Enabled="true" VarName="OSDComputerName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The computer name is required. Please enter a computer name.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">The computer name is not valid. It either contains a character that isn't allowed, or is longer than 15 characters.</Setter>
<Setter Property="NamedPattern">ComputerName</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
<Setter Property="Message">One of the characters in the computer name is not valid.</Setter>
<Setter Property="InvalidChars"/>
</Validator>
</Field>
-<Field Name="DomainCombo" Enabled="true" VarName="OSDDomainName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You must select a domain.</Setter>
</Validator>
</Field>
<Field Name="DomainOUCombo" Enabled="true" VarName="OSDDomainOUName"/>
-<Field Name="WorkgroupName" Summary="Workgroup:" Enabled="true" VarName="OSDWorkgroupName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
<Setter Property="NamedPattern">Workgroup</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="Join Domain Account:" Enabled="true" VarName="OSDJoinAccount">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDJoinPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
</Fields>
<Setter Property="ADCredentialCheck" Type="boolean">true</Setter>
<Setter Property="ADComputerObjectCheck" Type="boolean">true</Setter>
<Setter Property="UseExistingComputerName" Type="boolean">false</Setter>
<Data Name="Domain"/>
</Page>
-<Page Name="AdminAccounts" Type="Microsoft.SharedPages.AdminAccountsPage" DisplayName="Administrator Password">
-<Fields>
-<Field Name="Username" Summary="Add as Administrator:" Enabled="true" VarName="OSDAddAdmin">
<Default>%OSDJoinAccount%</Default>
-<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
<Setter Property="Message">One of the characters in the Account Name(s) field is not valid.</Setter>
<Setter Property="InvalidChars">/[]:|=,+*<>?"</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDLocalAdminPassword">
<Default/>
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
</Fields>
</Page>
-<Page Name="UDAPage" Type="Microsoft.OSDRefresh.UDAPage" DisplayName="User Device Affinity">
-<Fields>
-<Field Name="DeviceAfinity" Summary="" Enabled="true">
<Default>false</Default>
</Field>
-<Field Name="Username" Summary="User Device Affinity Account:" Enabled="true" VarName="SMSTSUdaUsers">
<Default>%OSDJoinAccount%</Default>
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
<Field Name="Password" Enabled="true"/>
</Fields>
</Page>
-<Page Name="LanguagePage" Type="Microsoft.OSDRefresh.LanguagePage" DisplayName="Language">
-<Fields>
-<Field Name="LanguagePack" Summary="Language Pack:" Enabled="true" VarName="UILanguage">
<Default>DE-DE</Default>
</Field>
-<Field Name="InputLocale" Summary="Locale:" Enabled="true" VarName="UserLocale">
<Default>en-US</Default>
</Field>
-<Field Name="KeyboardLocale" Summary="Keyboard Locale:" Enabled="true" VarName="KeyboardLocale">
<Default>00000409</Default>
</Field>
-<Field Name="TimeZone" Summary="Time Zone:" Enabled="true" VarName="OSDTimeZone">
<Default>Pacific Standard Time</Default>
</Field>
</Fields>
-<Data Name="LanguagePacks">
-<DataItem>
<Setter Property="DisplayName">English (United States)</Setter>
<Setter Property="Language">EN-US</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Chinese (Hong Kong S.A.R.)</Setter>
<Setter Property="Language">ZH-HK</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">German (Germany)</Setter>
<Setter Property="Language">DE-DE</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Japanese (Japan)</Setter>
<Setter Property="Language">JA-JP</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Polish (Poland)</Setter>
<Setter Property="Language">PL-PL</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Romanian (Romania)</Setter>
<Setter Property="Language">RO-RO</Setter>
</DataItem>
</Data>
</Page>
-<Page Name="ApplicationPage" Type="Microsoft.OSDRefresh.ApplicationPage" DisplayName="Install Programs">
<Setter Property="Link.Uri">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="TsAppBaseVariable">PACKAGES</Setter>
<Setter Property="TsApplicationBaseVariable">APPLICATIONS</Setter>
<Setter Property="TsWindowsAppPackageAppBaseVariable">WINDOWSAPPPACKAGEAPPS</Setter>
<Setter Property="TsAppInstall">AppInstall</Setter>
</Page>
<Page Name="SummaryPage" Type="Microsoft.Shared.SummaryPage" DisplayName="Summary"/>
-<Page Name="UserCapturePageOldPC" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
-<Fields>
<RadioGroup Name="LocationGroup" Locked="false"/>
-<Field Name="TargetDrive" Enabled="true" VarName="">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
</Validator>
</Field>
-<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No valid network share.</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
<Field Name="NoDataRadio" Enabled="false" VarName=""/>
<Field Name="LocalRadio" Enabled="false" VarName=""/>
<Field Name="USBRadio" Enabled="true" VarName=""/>
<Field Name="NetworkRadio" Enabled="true" VarName=""/>
</Fields>
<Setter Property="NetworkPassword"/>
<Setter Property="NetworkUsername"/>
<Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
<Setter Property="Format">disable</Setter>
<Setter Property="FormatPrompt">disable</Setter>
<Setter Property="MinimumDriveSize">10</Setter>
<Setter Property="State">Capture</Setter>
<Setter Property="NetworkDrive">n:</Setter>
<Data Name="Network"/>
</Page>
-<Page Name="ProgressPage" Type="Microsoft.OSDRefresh.ProgressPage" DisplayName="Capture Data">
<Setter Property="LogFilename">$LogPath$\USMTcapture.prg</Setter>
-<Tasks StatusTitle="Status" NameTitle="Task Name">
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy AppDiscovery XML">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\AppDiscoveryresult.xml.app"/>
<Setter Property="BitmapFilename">images\copy.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
<Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy Printers XML">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\PrinterList.xml"/>
<Setter Property="BitmapFilename">images\Printers.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy ProductsList">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\ProductsInstalled.txt"/>
<Setter Property="BitmapFilename">images\copy.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
<Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Run USMT">
<Setter Property="BitmapFilename">images\usmt.bmp</Setter>
<Setter Property="filename">%windir%\system32\wscript.exe</Setter>
<Setter Property="parameters">//B %ScriptRoot%\ZTIUserState.wsf /capture /OSDStateStorePath:$DriveLetter$\%OSDDataSourceDirectory% /UserDataKey:%OSDUserStateKeyPassword%</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="USMT scan state failed." Value="*" State="Error"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="RebootAfterCapture" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
-<Fields>
-<Field Name="RebootText" Summary="" Enabled="true">
<Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
</Field>
</Fields>
</Page>
-<Page Name="BitLocker" Type="Microsoft.OSDRefresh.BitLockerPage" DisplayName="BitLocker">
-<Fields>

-<RadioGroup Name="BitLockerRadioGroup" Locked="false">
<Default>TPMPIN</Default>
</RadioGroup>
-<RadioGroup Name="LocationGroup" Locked="false">
<Default>AD</Default>
</RadioGroup>
-<Field Name="BitLocker" Summary="" Enabled="true" VarName="BDEInstallSuppress">
<Default>True</Default>
</Field>
-<Field Name="PIN" Summary="" Enabled="true" VarName="BDEPIN">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The PIN must not be emtpy</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">PIN should be a number between 4-20 digits</Setter>
<Setter Property="Pattern">^[0-9-]{4,20}$</Setter>
</Validator>
</Field>
-<Field Name="WaitForEncryption" Summary="" Enabled="true" VarName="OSDBitlockerWaitForEncryption">
<Default>True</Default>
</Field>
</Fields>
<Setter Property="KeyLocation"/>
</Page>
-<Page Name="Build Type" Type="Microsoft.Wizard.CustomPage" DisplayName="Build Type">
-<Fields>
-<Field Name="label3" Summary="" Enabled="true" VarName="">
<Default>Choose Language Type</Default>
</Field>
-<RadioGroup Name="Group1" Summary="ABBLan" Enabled="true" VarName="ABBLang" Locked="false">
<Default>radiobutton1</Default>
</RadioGroup>
-<Field Name="combo5" Summary="ABBLang" Enabled="true" VarName="ABBLang">
<Default>English</Default>
</Field>
</Fields>
-<Data Name="CustomFields">
-<DataItem>
<Setter Property="ControlType">label</Setter>
<Setter Property="ID">3</Setter>
<Setter Property="X">37.27</Setter>
<Setter Property="Y">3.67</Setter>
<Setter Property="Width">100</Setter>
<Setter Property="Height">12</Setter>
<Setter Property="Name">label3</Setter>
<Setter Property="Label">Choose Language Type</Setter>
</DataItem>
-<DataItem>
<Setter Property="ControlType">combo</Setter>
<Setter Property="ID">5</Setter>
<Setter Property="X">36.87</Setter>
<Setter Property="Y">21.25</Setter>
<Setter Property="Width">100</Setter>
<Setter Property="Height">12</Setter>
<Setter Property="Name">combo5</Setter>
</DataItem>
</Data>
-<Data Name="combo5">
-<DataItem>
<Setter Property="DisplayName">English</Setter>
<Setter Property="Value">0</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Chinese</Setter>
<Setter Property="Value">1</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Japanese</Setter>
<Setter Property="Value">2</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">German</Setter>
<Setter Property="Value">3</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-2</Setter>
<Setter Property="Value">4</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-3</Setter>
<Setter Property="Value">5</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-4</Setter>
<Setter Property="Value">6</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-5</Setter>
<Setter Property="Value">7</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-6</Setter>
<Setter Property="Value">8</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-7</Setter>
<Setter Property="Value">9</Setter>
</DataItem>
</Data>
</Page>
</Pages>
-<StageGroups>
-<StageGroup DisplayName="New Computer">
-<Stage Name="NEWCOMPUTER" DisplayName="New Computer">
<PageRef Page="WelcomePage"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="SummaryPage"/>
</Stage>
-<Stage Name="NEWCOMPUTER.Prestaged" DisplayName="New Computer (prestaged media)">
<PageRef Page="WelcomePage"/>
<PageRef Page="BitLocker"/>
<PageRef Page="UserRestorePage"/>
<PageRef Page="ConfigScanBareMetal"/>
<PageRef Page="ComputerPage"/>
<PageRef Page="AdminAccounts"/>
<PageRef Page="UDAPage"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="ApplicationPage"/>
<PageRef Page="SummaryPage"/>
</Stage>
</StageGroup>
-<StageGroup DisplayName="Refresh">
-<Stage Name="REFRESH" DisplayName="Refresh">
<PageRef Page="WelcomePage"/>
<PageRef Page="VolumePage"/>
<PageRef Page="UserRestorePage"/>
<PageRef Page="ConfigScanPage"/>
<PageRef Page="ComputerPage"/>
<PageRef Page="AdminAccounts"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="ApplicationPage"/>
<PageRef Page="SummaryPage"/>
</Stage>
</StageGroup>
-<StageGroup DisplayName="Replace">
-<Stage Name="REPLACE" DisplayName="Replace, in full OS">
<PageRef Page="WelcomePageReplace"/>
<PageRef Page="ConfigScanPage"/>
<PageRef Page="RebootPage"/>
</Stage>
-<Stage Name="REPLACE.WinPE" DisplayName="Replace, in WinPE">
<PageRef Page="UserCapturePageOldPC"/>
<PageRef Page="ProgressPage"/>
<PageRef Page="RebootAfterCapture"/>
</Stage>
</StageGroup>
</StageGroups>
</Wizard>

I don't know much about the UDI but I think the FieldName should be TimeZoneName and not just TimeZone.

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

My iTunes will not connect to the internet because it is tied to IE's proxy settings but IE does not work how do I change the proxy setting to FireFox

I have stopped using IE because it doesn't work, however my iTunes will not connect to the internet now because it is tied to the proxy setting in IE and now I am using FireFox, so, how do I get iTunes to see FireFox as my web browser.

i am having the same problem, i stopped using IE and installed firefox , only now my itunes store won't connect to the internet.

HT201250 How do you let time machine know that a restored drive does not need a brand new backup set and just append to the old one?

I had an external drive failure and had to buy a brand new drive. I was able to restore my info onto a new drive, about 1.5 TB of data. When I go to launch time machine now with the new drive connected and my backup connected, it treats the new drive as if it had different data and wants to create a whole new backup set when it should just append. How do I get around this?
I could just reformat the backup drive and start fresh again but would rather not do that if I can avoid it, just in case there were errors in copying etc.

Hi
I should have been more clear, sorry. I work from a laptop. I have 2 external drives - one for my projects which failed but has since been replaced and restored from a backup. My 2nd external drive is the time machine backup drive.
When my project drive crashed, I bought a brand new drive and restored it using my time machine backup drive.
Now the data exists on 2 drives - the time machine backup drive, and the new drive. When I connect the backup drive now, it thinks my new drive has new data, probably since it is a new device/drive, and wants to do a brand new backup, when in fact the data already exists on that very drive. It shouldn't have to back up all 1.5 TB when nothing has changed!
Unless there is a way to tell time machine to simply append to the old backup, I think it will try and do a new backup (1.5 TB). I'm thinking maybe I should just initialize my time machine backup drive now and start over so it is only one backup set of 1.5 TB instead of (2) sets of 1.5 TB!

New Proxy Setting Not Applying

Similar Messages

Maybe you are looking for