New PSU, strange DDR msg

Ok guys you might remember me i had a prob, my P.C use to freeze all the time, anyway you suggested i get a new PSU which i did, this one : http://www.pch.co.il/docs/pd-695320562.htm , which is a huge monster of a PSU, anyway, at first start after installing it i had a strage massage about DDR timing being too somthing (cant rem the word), anyway i think the sweet Bios did what it did and fixed it, i think i might be a problem resulting due the volt change from my old Everpower 350 psu to this one, what do you think?

If your running stock and no OC, try these ramsettings in bios;
"Advanced Chipset Features" menu :
Dram timing setting to SPD ( which also show you ram stocktimings)
"Frequency/Voltage" menu -
Performance - Normal
DOT - Disabled
Dram frequency - 400 (or auto if 400 does not help)
Spread Spectrum - disabled
DDR power voltage - 2.7v or 2.8v
save and exit..
And see if "ram timings too tight" -message goes away and stay away.....

Similar Messages

New PSU...weird things happening

hey all!
Ok so i just got a new aspire 550w psu in changing from a 420w psu. Before everything worked fine with the 420..but now my system will only boot with 1 stick of memory in (one 512 stick of pc3200..2 banks of memory ) and my mobo supports 4 banks and everything worked absolutley fine before i installed the 550w psu...will not boot with both sticks
Note: i have cleared CMOS
Note2: both memory sticks i have tested and they do work by themselves...and i have tried moving them into different slots...originally i had them in Slots 2 and 3 and ive tried combos of 1 and 2, 1 and 3 and that didnt do much
any help is appreciated

Aspire has like 34A @12V, so i think its prolly enough.....
So are u sure u didnt bump into anything else while installing ur new PSU? I experienced problems when switching PSU from Antec to Tagan.
The problem that time was actually one of the power connectors was bad wich i used in my harddrive, i switched the connectors and it was all good.
The Led-bracket said i had memory problems......so im saying, try to check all the connectors are plugged in correct, and maybe try to switch some also.

CPU throttling with new PSU

Hello
I have a W510 with the 135W PSU. Or to be more precise: 6.75A @ 20V.
I work at two places, so I bought a generic 150W PSU with an adapter to fit the Thinkpad. The PSU is labeled 7.5A @ 20V, so it should have no problems running the laptop.
Still, upon boot I get the "This PSU is too weak for something something charging battery something" and my i7 is throttled to 1.2 GHz rather than the 3.06 it usually musters.
If I boot from battery and attach the PSU connector after Windows is up, it runs at full speed. And charges the battery just fine. So obviously, there is nothing wrong with the juice from the PSU.
Thus, I suspect that BIOS does something dumb. Can I override this somehow?
Friendly,
Some Dude
Solved!
Go to Solution.

Oh, I did not realize that I could see that in Power Manager. Fascinating!
It says 90 W.
I found another thread where the central pin thing was mentioned. I am about to order a new connector tip to chop up and modify, as that is quite a bit cheaper than buying a new PSU.
Thanks to you both for the information!

Problems on shuting down after installing new PSU on a p6-2207ep

Hi all, B4 explaining my problem I really dont know if i should post this in desktop hardware or in this section of freezes/hangs/ lockups thread but i think i is more fitting in here. My pc: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03382032 I bought a new PSU: XFX TS 550W 80PLUS BRONZE for the GPU upgrade R9 380 I was planning to do. Problems with the new power supply:
When I closed windows 7 the first problem arose, the picture freezes on the screen that says "windows shuting down", I waited a bit and nothing, tried to turn off the power by keeping pressed the power button but nothing had to turn it off directly in the back switch of the PSU... Second time happened soomething a little different, a few seconds after freezing again on the screen that says "windows shuting down" the windows actually shut down and the screen turned off but all the rest inside the computer case continues running from the fans to the light of the on / off button and was also able to shut it down by keeping the pwoer button pressed...
When I restart the computer he takes some time to shuts down, and only after a few seconds he turns on… Also tried the GPU with the new PSU fans worked but no input in screen which i just assumed some PSU problem. ATM i am in the process of an RMA waiting to know if it is a faulty PSU or not... Problems after reinstalling the original hardware: Some of the same porblems when i had the new PSU stayed namely: A few seconds after freezing again on the screen that says "windows shuting down" the windows actually shut down and the screen turned off but all the rest inside the computer case continues running from the fans to the light of the on / off button and was also able to shut it down by keeping the pwoer button pressed...
When I restart the computer he takes some time to shuts down, and only after a few seconds he turns on… What i have done so far to try correct the problem:Restore windows 7 to a point b4 the hardware installation.Reset BIOSHard resetClean BootDid a full checkdisk which means 0 kb in bad sectors...Did a full hardware check with HP software all tests passedDid a system file check everything fine What I fear the most is a faulty PSU that may have caused damage in my hardware mainly the motherboard but could be something else entirely.Could be that I need a specific BIOS for this motherboard / PSU combo but after returning to original Hardware the problems remained... What can I do given that i can only do software tests since I dont have an extra PC to test the parts...

It worked !!! I thought i had already reseted the bios but seems like using the menu didnt do it. The computer is now working as b4 thx god it isnt some damage on my hardware !!! Should I now access BIOS and save to default again ? I set the time manually in windows dont know if that is the best way to go around it anyways I am going to search about it. Btw the PSU is XFX the GPU is from MSI. How should i proceed now, should I keep with the RMA and make sure its not faulty or the problems that arose with it are all explained by problems in the BIOS and there is no reason to be afraid of the new PSU? Thx alot again !!!

New PSU for MSI P67S-C43 (B3) with new graphics card.

Good morning!
I'm in the market for a new PSU for my system (specs in signature). I think the current PSU I have would be sufficient for the graphics card I'm looking at getting, GeForce GTX 680 FTW+ (EVGA 04G-P4-3687-KR), however, I'd like to go modular. Any suggestions?
Thanks in advance!
like_a_god

A GTX680 system pulls less exactly same power like the same system with GTX260 (both 38A minimum without oc). So in terms of power there is no need for psu upgrade as the TX650 could handle a GTX680 with ease. Considering an oc card it might be 40A required minimum.
None the less this is a MSI forum so next time please don't ask for psu upgrades for an EVGA card. Better get an MSI card instead like N680GTX Lightning or N680GTX Twin Frozr 4GD5/OC (if you need 4GB).
If you want to upgarde the psu just because of it being modular then go for an 850w psu to have a noticeable power upgrade also. The HX850 is then the better choice. If you want a fully modular unit it would take AX850 instead.

NEW PSU bang!

Hi ppl
As some ppl might know from my last post. I have just bought a Antec TrueBlue 480W.
I connected it up today properly and turned it on and the fan began to spin and after about 1 or 2 seconds there was a big bang and everything stopped . Btw when I looked at the fan spinning it seemed to spin v slowly and the LEDs on it werent on. (It was connected to the fan only connector) I double checked and the connectors and everything was connected correctly.
So I took my old PSU I was replacing and installed that using only the necessary connectors (ATX, Molex to HDD and 4pin 12V connector)
The PC booted up fine and everything was 100% but when I retried the New Antec PSU with those few connectors it was totally dead. So this is very weird I thought cos my PC is 100% with my old Skyhawk PSU but now my new antec psu is dead
So any suggestions what could have gone wrong? Any experience of this happening. And I have e-mailed the Company and asked them whether I can RMA it under faulty item. U think I could do this? Faulty PSU????
Thanks guy for ur help
SAspaz
Btw the New antec is way more powerful 480W compared to the old Skyhawk 400W so nothin to do with a being underpowered.

Oh How Wrong you Are "msfan".....If you wrote them a Letter, or Called and asked to speak to CS Manager, There is a VERY Good chance that you will get your Original Money Reimbursed, as I had a Similar experience with my Older "Antec 380 Smart Power", Which are No Longer Offered, And I Really Let them Have it on the Phone (as far as Telling the CS Manager, That It Happened to my Wife, and Now she is afraid to even Use the PC, As there was Smoke Coming from the Back of the PC, and the Fire Dept. was Almost called, Bla, Bla, Bla...) and they (Antec) asked me "Where I had Puchased The Unit"? and Asked If I still had the Reciept? which I did, as I Bought it from Comp-USA, But I had Not Returned it Yet, As I wanted to Let someone at ANTEC Know exactly what happened, and How Traumatized My Wife was .....
Well Needless to say, That CS Manager, Asked Me if I wanted one of my Credit Cards Credited with the Purchase Price of the Unit, And I told Her, that I Needed a New PSU and that I would be Returning it to "Place of Purchase" Comp-USA, and she said that I had the Choice of Any Unit that Antec Made At No Cost!!!, and that I would Be reimbursed for the 380 Watt Unit that Malfuntioned , and all that I had to Do was Send the Bad Unit Back (In the Box that Arrived at my Door, the NEXT Day! with My Brand NEW 420 Watt True Power!! ) I would of Picked a Bigger unit, but it was July of 2000, so that was thier Best at the Time , So that was my Good Experience with ANTEC, And that Same unit is Powering My Daughters PC (Well she can Only Smack Keys now as she is only 16 Months Old! )........And thats whay I made the Statement that I did "msfan"......................Sean REILLY875

New PSU ??

I just rebuilt my pc and after reading the fourm for a while I started wondering if I should consider picking up a new PSU. All works great as is, no problems, (knock on wood) not even the CRC error problem listed here with allot of KT4VL that others are having.
Here is the catch, I am going to add two new case fans, one 80MM cooler master for exhaust and one 60mm for intake which will make for three fans ( one came with case, in the front of course ). I bought this case two years ago and it is a pretty nice one and came with a 300W HiPro PSU. If I am only going to add the two additional fans should I consider adding a new 400W PSU?
XP2200+
KT4VL
Cooler Master HSF HSC-V62
MSI MX440-VTD8X
1, 512 mb stick (samsung)
IBM Deskstar 40 gig, 7200rpm
WD 20 gig, 7200rpm
Sony CDRW (don't remember model name)
Sony CDR (same as above but don't remember name)
SB Live

Hi,
Fans take somewhere between 1.5-2.5 W, so you have to add a lot to get into trouble.....
When you use like 20 or more of them, you might consider it :D

Buying new PSU is this ok?

i keep gettin problems and everyone is sayin PSU so im just gonna buy a new PSU so if u can give me ur opinion on this let me kno.
Aspire / 520-Watt / ATX / Triple 80mm LED Fan / Black Aluminum / Power Supply
+3.3V - 30a
+5V - 32a
+12V - 35a
-12V - .08a
-5V - - .03a
+5VSB - 2.0a
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=913527&CatId=1079

It has good amps on the rail, thats for sure.
Some things you might consider, is to buy a PSU with a 24 pin-conector and some s-ata connectors for future upgrades. Maybe it would be nice with a automatic fan-control aswell.
Other then that it's a good and strong PSU

Can my new PSU cut it?

i just bought this new psu (see signature) after reading the stickies saying that i should have at least 18A for the 12v reading...plus when i was going to sleep last night i smelled burning electrical parts and got really worried that my computer was screwed up....turns out it was my fan for my room... :bonk:but of course i find that out after i buy a new psu...
anyways, can anyone give me some input weather or not the new psu (in my sig) will be okay for the sytem listed?
any input would be very helpful!

thanks!
i was hoping i didn't make a mistake in picking it, i was looking at the antec and enermax (sp?) ones and while they looked nice, being b/t 70-100 dollars is a bit much for a poor student like me i was mostly worried about adding the video card to the mix since the 9800 pro is coming in a day or two (that and the smell freaked me out)
glad to see it'll be okay

A very new and strange warning message from my iPhone

I am getting a very new and strange warning message on my iPhone. The phone will repeatedly - even when sitting idle - flash a message that states, "This accessory not made to work with iPhone. Would you like to turn on Airplane Mode to reduce audio interference ... you will not be able to make or receive calls?"
This message started to flash up on my iPhone after I installed Leopard yesterday evening (11/15/07). I just updated my iTunes software today so I have iTunes 7.5 (19) and my iPhone software version is 1.1.2. Finally, I am not trying to hack my iPhone since I ain't smart enough to do so and, even if I were, I wouldn't want to have a dead phone on my hands.
Any suggestions or thoughts? Thanks.

Charles
I think my first instinct would be to try a Reset of the iPhone, if that doesn't improve things then try a Restore from within iTunes BUT.....
I would also wait awhile and see in anyone else weighs in with other suggestions first.
Good luck
FlatE

Problems after installing new PSU

I have a very unstable system after replacing the PSU. Her is a list of issues encountered.
I had worked on my PC today then left it running as usual while I was away. Came back and my PC was "sleeping" reawakened and it fired up except the screen remained black. Tried several times to restart...same effect. Went into bios and couldn't see anything untoward but did change my start sequence thinking this may have an effect. Finally got my pc to light up the screen only to find the following messages. The previous performance overclocking failed?
Keep your current bios settings y or n. Now I don't overclock as far as I know?? I went back to bios and changed a few minor settings. Tried to restart and got as far as Windows is starting which promptly froze. Tried restarting again and got to a black screen wiyh flashing cursor in top left. Went back to bios and set failsafe default settings. This time my pc fired up. What is going on, I am really getting anxious as replacing my PSU was (I thought) going to bring stability back to my PC. Why does my PC fail to wake up? I have bios set on S3, and enabled the relevant resume choices. I need help....thanx

It worked !!! I thought i had already reseted the bios but seems like using the menu didnt do it. The computer is now working as b4 thx god it isnt some damage on my hardware !!! Should I now access BIOS and save to default again ? I set the time manually in windows dont know if that is the best way to go around it anyways I am going to search about it. Btw the PSU is XFX the GPU is from MSI. How should i proceed now, should I keep with the RMA and make sure its not faulty or the problems that arose with it are all explained by problems in the BIOS and there is no reason to be afraid of the new PSU? Thx alot again !!!

Well all test complete, New PSU... Have to RMA

Well guys thanks for all the help, After receiving the new PSU I began all the test over again, the same things began to happen, even with the board out of the case as MSI tech support suggested. So I on my way back to Newegg to RMA the board. I decided to save a little money on the PSU and put it towards some better memory.
For all of you that helped a big !!!
and of course I'll keep you all posted!
Curious

Quote
Originally posted by curiousg
OHH P.S.
Do you think the PSU is a little overkill??
Yes it is.

HT201418 After restoring from iCloud to new device - strange Apple ID popup on the phone

I have change my iPhone 6 to 6+. I have done backup of the old iPhone to iCloud. When I started restore process - iOS system gave you a question with Apple ID (is this your Apple ID?) as always with strange one. I guess system is always giving suggestion to the Apple ID account latest backup was done to the nearest server of iCLOUD. Of course I have deleted this stranger Apple ID suggestion for restore and I have applied my own APPLE ID.
Restore took some time and was successful.
ISSUE - many times iOS want to connect to iTunes - pop up window is appearing having again suggestion of the same STRANGE Apple ID. It;s annoying and I do not know how to get rid out from my iOS.
I put my normal Apple ID with credentials into iCloud and iTunes setting on iPhone but still strange one pops-up

You probably needed to update the iOS on the new phone. When it's done, set it up as a new iPhone, then disconnect it from your computer. Then go to Settings>General>Reset, tap Erase All Content and Settings (provide the password if prompted), go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup and follow the prompts. Be sure your phone is connected to wifi and your charger while it is restoring the backup.

I am trying to set up email on new ipad and get msg yahoo!Server Unavailable Please try again later. Any suggestions please?

I just bought an Ipad 2 and have been trying to set up my yahoo email. I continually get the msg, Yahoo! Server Unavailable Please try again later. I am not real savvy with this stuff so I need an answer I can understand, please...
Thanks for any help,
jeannie

OK this is what I had to do; Not sure why but apple does not support yahoo email on the new ipad 2 so I had to create a gmail account. Deleted my yahoo account on ipad and entered new gmail account on the ipad, and it worked. I can now get email on ipad. Also gamil will import all contacts and mail from yahoo.
Jeannie

MAC G5 White light, no fans or chime, new PSU

A friend gave me a late 2005 G5 with a bad power supply. The front LED would just flash white.
I replaced the power supply and now the front LED light stays white but I have no chime or fans going. I pushed the SMU button and replaced the CR2032 battery.
Anything else that needs to be done when a new power supply is installed?
Thanks

Boy, it's real tough to tell what the problem is in person, moreso remotely.
Can you tell if the fans or hard drive are is working?
Do you have a meter to check the PSU?
http://jimwarholic.com/2010/03/measuring-imac-g5-power-supply-voltages-at-connec tor-plug-pinouts.php

New PSU, strange DDR msg

Similar Messages

Maybe you are looking for