NEW PURCHASED JANUARY ITOUCH UPDATE WITH MAIL

I use Entourage for my email. It works great with the POP info "mail.example.com", login info and password. Inputing the same info into "mail" on the mac or using the new update for the itouch to use mail doesn't work for me. The SSL's are checked properly,ports are the same, POP and SMTP are the same as my Entourage set-up. What am I doing wrong? Any ideas? This should be easy. The error messages I get is wrong log in or password incorrect. I know these are correct.. thanks

Lady Engineer wrote:
Kinda of surprised that the email inbox alert sound still does not work at all.
yes, all selections are checked, yet no sound when receiving new email.
disappointed...
I think there is some other issue than a broken operating system, since I cruise these forums regularly, and have rarely heard a complaint about it. Either your preferences for Mail aren't set up right (and you state that they are) or your sound preferences are set up incorrectly.
First, since you said you have your mail preferences for sound are set up correctly, go into System Preferences > Sound and verify that the checkbox is checked for “Play user interface sound effects.”
If both of those are set correctly, then you’re likely experiencing a bug in Mail related to the IMAP IDLE command. If you’re checking your email from an IMAP server that supports the IDLE command, your emails are actually being pushed to Apple Mail in real time as soon as those messages arrive. But Apple Mail’s new-mail sound doesn’t work with push email; it only works with emails that Mail pulls from the server itself. It pulls messages when you click the Get Mail button or when it automatically checks for new mail based on its schedule in Preferences.
If you need the IDLE command, then you're not going to get sounds. It's a known bug, and probably very low on Apple's concerns for updates. You should drop a complaint or comment to Apple.
Message was edited by: OrangeMarlin

Similar Messages

Item text in Purchase Order getting updated with info. record Purchase Order Text

Hello All,
I am working in a roll out project and facing issue in text repeating twice for the line item in the Purchase Order for the new company code for which rollout is happening
Issue:
Item text in Purchase Order getting updated with info. record Purchase Order Text
01) PO Text is maintained in the material master under "Purchase Order Text" tab
02) The PO text that is maintained in material master is getting updated in the Purchase Info. Record
03) When Purchase Order is created, the "Item Text" gets updated in the Purchase Order automatically only for the new company code for which rollout is happening. when printed, this results in the text getting duplicated twice
03.1) this behavior is not observed in the Plants/ Company code that is already Live
Configurations in the system:
The copying rules for the "Texts for Purchase Orders" is
Source Object = "Info Record", Source Text="Purchase Order Text", Fix="*"
We have modified the Purchase Order form to print one of the condition types maintained for calculating the tax. Other than this there is no change to the plants that are already live.
I could not locate any "Purchase Organization" / "Company Code" / "Plant specific configuration.
Am I missing any configuration or where can I look in what is causing this error.
Request help from the experts in the forum.
with Regards,
Dhandapani R

There is no company/purchasing/plant specific customizing for purchase order text.
The customizing copying rules for the "Texts for Purchase Orders" affects all equally .
If the text in the purchase order in ME23N is already filled different to other plants, then you either have a modification in place, or the texts are differently maintained in the referenced data (vendor, material, info record, contract)

Update - Help - Brand New ipod - won't update with software

IPod will not update with cd-rom it came with - this is the first - initial - brand new install of ipod
win xp with sp2 installed
used cd-rom that came with ipod - followed instructions to the tee - stated it can not update ipod - itunes does not see ipod - went to web site and downloaded 47mb file from june 05
still will not update - states ipod not supported by this software - the ipod is BRAND NEW - 30gb color photo ipod??
please help me

Hi I had the same problem with my last ipod. i tried all of the steps on the apple support site but none of them worked. I decided to send my ipod in for a repair. Anyway when a week later my ipod came back it was fixed but when i loaded up the computer the disk locked again. I followed through the instructions which said to download the newest software. So i downloaded the new software again and this still didnt work. The last thing i tried to do was to use an old version of an updater so i used (ipod updater 2004-11-15) this ran through the restore process and after completing this, the menu on the ipod loaded up. I then connected to itunes and it allowed it to communicate and transfer the songs
It worked for me i hope it works for you.
Best of luck
Daz Semple

HT4623 i have a new iphone 5 i updated with old i 4s how cand I change to new phone

I have a new iphone5 I updated with my old Iphone 4s How can I change to my Iphone5 to update itunes?

No idea what you are asking
Please explain

HT1296 A new purchase does NOT sync with my iPod..

This happenned brfore, but after several sync episodes, it appeared. Why does thi happen? Can I force it? The new purchase is in the iTunes library

Here is the classic forum
https://discussions.apple.com/community/ipod/ipod_classic
Taking four times could be due to a software glitch.

New purchase won't synch with iPad!

I have the latest iTunes software running on the family Windows 7 Home Premium X64 desktop. It is connected to my no-longer-updateable iPad 1 running the latest version of iOs available via USB cable. I download all episodes of a recent purchase of Masterpiece Theater (Daunton Abbey season 3) intending to transfer it to my iPad just like I did with earlier downloads of the same series so I can watch it in bed with headphones while my husband sleeps. The transfer fails with a message indicating that the format is not supported. Then we tried streaming it over our 1000 mbps certified Ethernet network to our Apple TV. This worked just fine in the past. Now, all of a sudden, the new download "freezes" on screen when streamed to the Apple TV. Ouir Apple TV also refuses to install new versions of iOs! We have over $900.00 invested in this hardware alone, why has it suddenly stopped working on what seems to be a standard procedure that has been working to the better part of three years? Do we have to "back date" our iTunes software and re-download? We have 52 mbps wireless networking connected to the iPad 1. Is there a way to stream my purchase directly to the old iPad? We received a subscription to the Atlantic Magazine, but their app only runs on iOs 6 and won't install. Is there a work around for this probelm?

You need to use iTunes 10.5.1 in order to install the update to the iPad.
Make sure that you are connecting the iPad to a USB port on the Mac - not a port on a hub. Try using another USB port on the MacBook as well.

Can't sync purchased january software update

Hi. I purchased the january software upgrade but my ipod did not sync it. and the worse thing is itunes store charge my prepaid card.
How can I fix this

I FIGURED IT OUT!!! Uncheck manually manage music after you click on your recently formatted ipod. Then, since you are currently under the summary tab, click on the music, movies, photo, podcasts tabs. Uncheck the sync for all of them. So now that none of your media is set to sync and the ipod is not manually syncing, apply the settings. Then go back to the summary tab and SYNC. VIOLA! I now have the update on my ipod!! GOOD LUCK!

Unsuccessful 5th gen iTouch update with IOS 8.1.2

Tried to update 5th gen iTouch with OIS 8.1.2 and after downloading and almost completing the iTouch screen froze with white background and Apple logo. iTunes stating cannot access iTouch due to password lock, but cannot access due to frozen screen. Also cannot turn off iTouch to try and reset.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Unable to purchase January software update

I upgraded to 1.1.4 and got the prompt to purchase the upgrade, I clicked don't remind me at the time (by accident). Now I want to purchase it and I cannot find the buy button or does not show up when I repeat the steps outlined in the troubleshooting guide. Is there a way to enable that button again. When I click ok at the bottom of the software upgrade page it takes me to my home iTunes store, where I cannot purchase or find how to purchase the software.
Help please!!!

Hey Abake,
You can download the iPod touch January Software Upgrade sing this link:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=271872604&s=14 3441
Jason

TS1368 Can not connect to iTunes to purchase apps or update with iPad

This is also the case with my iphone4s. I can not connect to iTunes at all! There's no specific error number just can not connect to iTunes. Then contact iTunes support. I have tried a few different things: clearing paused downloads in purchased area of app store (ipad2) and resetting wifi settings (ipad2) i also reset my wifi and that did no good either. Would be nice if someone knew what i needed to do to get rid of this issue I've been down for 3 days as I really can not do anything with either of my products. Thank you

I tried that, i tried every setting i could think of and tried all the ideas posted on this site. i got it working eventually though i had to wait for ios 6 to be released then after i downloaded and installed it, it started working.
problem over
thank you anyway

Did the new iPhoto 9.4 update with Mountain Lion 10.8.2 totally disorder anybody else's iPhoto library? Mine is now a total cluster f*

After updating to version 9.4 my entire iPhoto library became completely disordered. After updating, then opening iPhoto, it promoted me that it had to rebuild my iPhoto library. Then after it did that it said it found inconsistencies it needed to fix. THEN not only is every event completely out of order, and not the way I had it before. It is now ordered completely randomly. At the top there are two events from 2012, then the 3rd event is from 2008, the 4th event is from 2010, the 5th event is then from 2011. I have 12,000 photos and NEVER has any iPhoto update wonked out the order of my iPhoto library. Now it feels almost unusable!

Yes, mine too. The photos within the events can still be sorted but the actual event order is not carrying over to itunes or idevices. If I click the photos tab in iphoto, they (events) are in a scrambled order with no rhyme or reason. That same order is syncing to itunes and idevices. I spoke to support and they are confused as well but easily able to duplicate. Very frustrating. I have 46 events, most listed by years such as 2011,2012, etc. 2012 is about halfway through the list while 2011 is next to last. everything else is inbetween. The first event i see is 1975, the second is 2009. I hope they fix this soon as all the other regular attempts are futile. You can rebuild, delete the ipod photo cache or fix permissions. nothing will reorder the event listing under photos in iphoto, which unfortunately is where itunes gets its order from.

IH08 : Equipment list is adding new entry instead of updating with current

Hi,
The list is displaying the equipment many times in the list.
According to the requirement the equipment should be displayed only once with the current function location it is placed.
Please help.

Hi,
The list is displaying the equipment many times in the list.
According to the requirement the equipment should be displayed only once with the current function location it is placed.
Please help.

Problem with Mail "Invalid Incoming Mail Server"

I changed my iCloud password today and then tried to update password settings on my MacBook Air in System Preferences and Mail. I first started in System Preferences/iCloud. I signed out and then signed back in with new password. Everything updated except Mail, which prompted me to update settings in the Mail application. When I launched Mail, my iCloud account was missing, so I created a new iCloud account in Preferences. This is where the trouble began. I was able to successfully create the account, but when I tried to make any changes to the default setting (i.e. changing Junk mail filtering in Mailbox Behaviors), I was prompted to save my changes (as normal), BUT then I received this error message:
Invalid Incoming Mail Server.
The "Incoming Mail Server" field cannot be empty.
[OK]
The only option was to click OK and then lose the changes. I tried deleting the account and starting over. I tried restarting the laptop. I tried signing back out of iCloud in System Preferences. Nothing has worked. I'd like to make changes to the account settings and not get stuck with the default settings. Incidentally, when I looked up this issue in previous discussions, I tried the other recommendations that seemed to work for everyone else, but hasn't worked for me.
FYI, I'm running the most recent version of Mountain Lion.
If anyone has any other suggestions, I'd love some help with this.
Thanks!
P.S. Why does Apple make everything so hard when you need to change a password? This has cost me hours of time, not to mention my sanity.
P.P.S. I've had no issues in updating my iPhone and iPad.

Unfortunately that did not work. I unchecked mail and restarted my computer. Went back in & checked mail. I have an appointment at Apple Genius Bar on Monday. Thank you for the suggestion.

HT1420 My old computer crashed so I bought this new one. I can't get my prevouis purchases and my new purchases will not let me add to my IPODs. I deauthorized all computers and just authourzed ths one. my new one. How do I get my music back and how do I

My old computer crashed andI bought a new one. When I went to Itunes I deauthorized all computers and then authorized my new one but I can not get my prevous purchases and I can not add my new purchases to my IPods with out it deleting all the music. How can I transfer everything that was on the old computer to this new one?

Whether you can redownload previous purchases depends upon the type of item (audiobooks and ringtones are one-time only downloads), what country that you are in (music, films, TV shows can't be redownloaded in all countries), and whether the item is still in your country's store (content providers occasionally remove their items) - what you can redownload will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage
Or you should be able to copy purchases back from your iPod via the File > Devices > Transfer Purchases menu option (if the drop-down menus aren't showing then control-B should get them to show).
If you have music from other sources on your iPod (e.g. copied from CDs) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
Or do you have a copy of them anywhere else e.g. on your backup of your downloads/library that you can copy them onto your new computer from ?

GL to get updated with Moving average price

Hi Guru's
when we do PGI, currently the cost of goods issue value is updated from Moving average price into a GL account,
Now i have created a new GL account and also want this new GL to get updated with the Moving average Price.
Where can i make these settings. can u give step by step solution.
Regards
Abhijeet

First u pls check how its updating with moving average price and select in MMRecord valuation class and price options, then check settings for ur gl account go to fs00 display mode check settings in control data.
Compare ur gl account which u have created with standard Gl account.

NEW PURCHASED JANUARY ITOUCH UPDATE WITH MAIL

Similar Messages

Maybe you are looking for