New r7850 black squares across screen

Hi, my system is:
Intel Core i5 3570K
Gigabyte Z77-D3H
Kingston HyperX KHX1600C9D3K2/8GX 8GB 2X4GB DDR3-1600 XMP
MSI Radeon HD 7850 Twin Frozr III 860MHZ 2GB 4.8GHZ GDDR5
OCZ Vertex 3 120GB 2.5IN SATA3 6Gbps SandForce SF-2281 Solid State Disk
Microsoft Windows 7 Home Premium Edition 64BIT
Corsair TX650 V2 650W
After installing my new graphics card and downloading the driver from the disk that came with it I rebooted my PC and when I got to the windows log in screen the screen was covered with small black square boxes running diagonally. I am unable to get rid of them without disabling my card. I also tried the amd drivers from the website. Any help on this is appreciated. Thanks

Hi thanks again for the response.
Testing this card in another system isnt really a option for me but I tested my old graphic card in the same pci 16x slot on my Gigabyte z77d3h and it worked fine. The card seems to be the problem.
I have also eliminated the possibility of a monitor or cable problem by using the hdmi port on the card instead of the dvi and running it through my 720hd TV. The same black box checkered problem persisted.

Similar Messages

  • Thin black line across screen

    My 5th generation Ipod classic has, in the last year, developed a think black line across the center of the screen that is always there. Is this a "dead pixel" area that has developed? Is there any way to repair this that isn't costly?

    This is a fairly common problem and I believe the only solution is to replace the screen or simply live with it. My daughter's old ipod does the same thing. You will notice that the lines only show up when the backlight it on, right?
    Patrick

  • Macbook Pro Black boxes across screen then crashes

    I have a Macbook Pro that I got 2 months ago. A couple days ago it froze and had black boxes all across the screen, then it crashed. Today when I started it up after I logged in while it was loading the black boxes popped up again, then it crashed. And when I tried to restart it it just beeped. The battery was around 50% so it wasn't dead. Its been fully updated and I haven't made any changes to it. Please help if there's anything I can do without taking it in

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Best.

  • Black line across screen after sleep button pressed

    Hi,
    When i press the sleep button, i have these black lines appearing across the screen of my ipod which fade away almost immediately. This only happens when i press the sleep button.
    Does anyone know if this is a software or hardware issue and can it be fixed?
    thanks

    Okay, I've updated firmware.
    Can you tell me, does this mean my iMac was one of
    the first off the production line and could have all
    the usual Apple early problems...?
    I think I should still take it back to shop and
    change it for one of their new stock models in about
    3 weeks time when they take delivery of latest stock,
    what do you think?
    I'm only suspicious as I bought a first generation
    iMac G5 and had fan noise and heat problems galour. I
    don't want a repeat with an early Intel iMac.
    From what I see other posters saying who have just received new ones directly by special order, they are having to do the firmware updates as well, so there is no way to tell how new yours is or isn't. If these resets do not solve the black screen problem now, I think you'll have to take it back anyway. Unless someone else can give you another idea.
    edit-
    I understand what you're saying about the first models of anything, but I've looked at this as actually being the best of the G5 revisions combined with better, cooler running internal components. If yours is as quiet as mine, and if you resolve the black screen issue, my opinion is that it's not worth giving it up. I've been using an iMac Intel that was returned to Apple, I don't know why and don't really care because it works perfectly for me and cost less.
    Message was edited by: myhighway

  • 2 Vertical Black Bars Across Screen...

    Anyone know about or experienced vertical black bars (2) across the monitor after returning from sleep or standby mode?
    I'm just worried my computer will crap out on me when it's most inconvenient so I'm trying to guage what computer problems/elderly computer symptoms I'll be dealing with in it's decline. It's only from 2009, but it's heavily used and has lots of graphic design and media software on it.
    Note: The SD card recently stopped working, and the Genius bar determined it was a mechanical failure. Also, the CD burn hasn't been working for a while.
    Using a Macbook pro os x, leopard, purchased 2009.

    It only happens for a split second, and before/while the computer is waking up so when I try to take a screen shot, it doesn't work because it's not fully on yet. However, I will take a pic with some other device so I do have a picture of it. And I FOR SURE have all my data backed up plus on a flash.
    Thanks for the advice.

  • Black line across screen

    I recently noticed on my blackberry 9360 that there is a black line on the screen that keeps getting bigger.  I haven't dropped my phone and there hasn't been any water damage.  What causes the line?  Is the screen so fragile that cleaning it can break it?

    That's the problem. An issue like that is usually considered physical damage and they domy cover it. Its is shame but its the way it goes. If you're so inclined you might be able to replace it yourself if you're good at that type of thing. Parts are available online.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Brand New iPad 3 has a jiggly screen and black boxes across the screen in different apps

    My mother purchased a brand new iPad 3 about 1 week ago.  The screen has begun to shake while she is in the apps.  (This is not the shaking that icons do on when you hold an app down so you can rearrange.)  When this happens the screen will go blank when her hand is near it and reappear when she moves it away.  Also, in some apps, I have experienced this in the App Store and Facebook, black boxes cover the screen so that you cannot see what is behind them.
    We have tried shutting it down completely, but that doesn't seem to be a fix.
    I have been searching for others with this problem and haven't found any.  Help would be appreciated.  Given the sporadic nature (but often enough to be a bother), I'm hesitant to go to the Genius Bar for fear it wouldn't do it then. 

    I've had the same problem with Big Black squares covering the screen. And a few times the screen has split vertical in the middle and pushed everything in the on half a little down, making it very difficult to read text as the lines was cut in half.
    I first experienced it in Mail, and then in Safari. I noticed that it is only covering content, not the App bar and When I scrolled down, the boxes were staying On the spot On the page. I figure it must be a software problem as it moves alting with the rest of the content, so I tried uenig Chrome instead, but yesterday the same ting happened.
    I have tryed to take a screen dump, but it gets completely black
    Its not warm When the problem occours.
    Anyone with a solution?

  • Is there any way I can get the pictures on my iPhone 5c to be the whole screen instead of with a black band across the top and bottom?

    My new phone only let's me take pictures with a black band across the top and bottom instead of the whole screen, does anyone know how to change this?

    AJ Green wrote:
    My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing.  You need to enable location services.
    Your wifi-only iPad does not have GPS. Read the specs for your device.

  • Image shares screen with a black square

    Recently, whenever I start to edit a screenshot, the following happens -
    1. I take a screen shot. I am using a PC with Windows 7 operating system. I am using Photoshop Elements v. 12.1.
    2. I go to "New" in file and "Image from Clipboard"
    3. The image is now displayed with a black square at the right. Please note - this is a recent problem. I strongly suspect I selected a button that caused this, but I have no idea what button. I would love to know if other people have encountered this problem and, if so, how did you fix it?

    Hi,
    Do you have two monitors with the screen extended on to the second monitor?
    How are you capturing the screen?
    If you only want to capture the active window, then try using Alt + PrtScn
    Since you are using Windows 7, you could use the Snipping Tool. That enables you to select part of the screen and copy it to the clipboard.
    Brian

  • Blank screen with a black square and question mark went start up

    Hi,
    When I try to start up my Macbook pro it will only go to a grey screen with a black square with a question mark inside. Please please help!!!!

    Using the disk utility (on first aid tab, which it defaults to) will not erase anything.
    Of course if the issue is as I suspect, it's a moot point.
    I suspect your Hard Drive is not being recognized. If it is not, then neither disk utility nor the installer will be able to even read the hard drive to let you do anything to it.
    Have your backups? You're looking at a replacement hard drive most likely.
    Some things to try:
    Reset the SMC
    --disconnect the power adapter and remove the battery
    --hold in the power button for 10 seconds
    --reseat the battery and reconnect the power adapter
    Reset the PRAM
    --press and release the power button
    --immediately after releasing the power button, hold down appleoption+PR and keep them held down until you hear the start up chime twice (I like to do it until it dings a third time.)
    --release the keys after the chimes
    If these steps do not resolve the issue, it is time to back up your data if you have not already done so.
    If you have another mac, you may be able to retrieve the data yourself using firewire target disk mode:
    http://docs.info.apple.com/article.html?artnum=58583
    Now if the host computer does not recognize the target computer, you may be looking at paying an authorized service provider or apple store to retrieve the data for you.
    Of course you can send in the computer without doing any data retrieval or backups, but keep in mind the repair center it gets shipped do does not do ANY backup or data transfer. They will replace the hard drive and make sure the new one works, but the new one will be empty.

  • I have a new l7 macbook pro running snow leopard.  When I try to boot into windows7 32bit, I get either a blue, black, or flickering screen.  Then I have to physically shut down and try again.  At that point it will load correctly.  Any help?

    I have a new l7 Macbook Pro running snow leopard.  When I tried to to install windows 7 32 bit on bootcamp, I kept getting a flicking black and blue screen when it tried to install. (Tried several times).  I finally downloaded the bootcamp windows support to a flash.  I inserted that and finally got it installed.  Now when I try to boot into windows I get either a solid black (sometimes blue) or flickering screen and windows will not start up.  If I then physically shut down the mac and restart, it will finally boot into windows where it tells me that windows was shut down unexpectently and once I click start windows normally, it will boot up.  That will generally let me boot into windows for the remaining of the day.  The next day, the same thing happens again.  I have tried reinstalling several times, and the same thing keeps happening.  It is not my windows disk because it installs flawlessly on the mid 2008 macbook pro.  Anyone know how to fix this?

    I own HDM 2011. But they have products that aren't listed or hard to find too.
    Recommending Pro version for one user's needs:
    http://www.wilderssecurity.com/showthread.php?t=297756
    Pro vs HDM 2011 feature comparison
    http://www.paragon-software.com/home/hdm-personal/comparison.html
    Forum topics:
    http://www.wilderssecurity.com/showthread.php?t=297756
    http://www.wilderssecurity.com/showthread.php?t=303155

  • Black Square Image on Screen

    There is an image of a black square with an up arrow on the lower right corner of my screen. Does anyone know what that is? Sometimes it has a line though it. Thanks.
    Solved!
    Go to Solution.

    Ruggs,
    Can you tell us a bit more?   What model system do you have?   What OS were you running?
    When did this first happen?  I.e. after any updates, etc?
    If you go into the BIOS, does it see the hard disk listed?
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I have a black band across my screen is it broken

    I have got a black band across my screen on my I pad don't know how this has come is it an error or something, or is it broken.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • I just updated the ios 7 on my ipad and now i have this black square in the middle of the screen and i cant use my ipad anymore

    after updating the is a black square on the screen of my ipad, why is that and whjat can i do to make that square dissapear?

    Try to reset the device:
    *Device reset*
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • Black Square on Boot Screen after last update

    Hi everybody, I made the last security update of OSX on May 25th, (osx 10.9.3), and iTunes 11.2.2 on June 10th.
    I do not use to reboot so much the computer, but I do that every 10 or 20 days. After one of those updates, I got these screen while booting up the computer:
    As you can see, there is a black square, with the cursor over it. I can move the cursor and the computer seems to start without problems (actually faster) but showing that square. The other difference is also that now I cannot see the usual spinner under the apple logo.
    I do not have any kind of boot camp or other OS installed. I have only changed the HD for an SSD one, but this was at november of last year, and everything has worked without problems until this date.
    If anybody can give an idea on how to solve it, or if I am the only one who is havving this issue, please, post it here.
    Thank you very much

    So here it is:
    EtreCheck version: 1.9.11 (43) - report generated 15 de junio de 2014 20:31:23 GMT+2
    Hardware Information:
              MacBook Pro (13-inch, Late 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.4 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.3 (13D65) - Uptime: 0 days 1:27:21
    Disk Information:
              KINGSTON SH103S3120G disk0 : (120,03 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        MacintoshHD (disk0s2) / [Startup]: 119,17 GB (19,14 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 20
    Gatekeeper:
              Anywhere
    Kernel Extensions:
              [kext loaded] com.shapeservices.msm.driver.MSMFramebuffer (3.3.2 - SDK 10.6) Support
              [kext loaded] com.shapeservices.msm.driver.MSMVideoDevice (3.3.2 - SDK 10.6) Support
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
              MySQLCOM: Path: /Library/StartupItems/MySQLCOM
    Launch Daemons:
              [loaded] ag.shape.MSMToolHelper.plist Support
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.adobe.SwitchBoard.plist Support
              [loaded] com.google.keystone.daemon.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
              [loaded] com.oracle.java.Helper-Tool.plist Support
              [loaded] com.oracle.java.JavaUpdateHelper.plist Support
              [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.adobe.CS5ServiceManager.plist Support
              [loaded] com.google.keystone.agent.plist Support
              [loaded] com.oracle.java.Java-Updater.plist Support
              [loaded] org.macosforge.xquartz.startx.plist Support
    User Login Items:
              iTunesHelper
              TimingHelper
              SpeechSynthesisServer
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 12.0.0.44 - SDK 10.6 Outdated! Update
              Default Browser: Version: 537 - SDK 10.9
              o1dbrowserplugin: Version: 5.4.2.18903 Support
              SharePointBrowserPlugin: Version: 14.0.0 Support
              googletalkbrowserplugin: Version: 5.4.2.18903 Support
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
              Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
              JavaAppletPlugin: Version: Java 7 Update 55 Check version
    Safari Extensions:
              AdBlock: Version: 2.7.1
              BugMeNot: Version: 1.2
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              CoverVersion: Version: 2.1.6 - SDK 10.8 Support
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  Support
              Growl  Support
              Java  Support
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   3%          eclipse
                   2%          Mail
                   1%          loginwindow
                   0%          fontd
    Top Processes by Memory:
              553 MB          eclipse
              172 MB          Safari
              100 MB          Mail
              82 MB          SourceTree
              74 MB          com.apple.quicklook.satellite
    Virtual Memory Information:
              66 MB          Free RAM
              1.09 GB          Active RAM
              1.04 GB          Inactive RAM
              1020 MB          Wired RAM
              716 MB          Page-ins
              12 MB          Page-outs

Maybe you are looking for

  • Facebook notifications won't show up on the notification center?

    Facebook notifications won't show up on the notification center?

  • How to manage the alternative / interchangeable material in a BOM

    Dear Sir , firstly i appreciate any effor to handle this problem ... secondly excuse me for long problem description and details . thirdly consider it as a challenge for you . Suppose we have a (Finished Goods -> M1,M2) and (Raw Materials -> x1, x2 ,

  • Bridge resolution changed

    Previously I had processed all of our images at 600ppi. I import into iphoto then use CS3 (bridge and photoshop) to edit the images. Recently, the Bridge metadata in all of my images changed to 72ppi. I know this is not accurate as I have previously

  • XSRF error when returning to SRM from external catalog

    Hello, We recently applied support package stack 19 to our SRM 5.0 development system, and after doing so found that some of our configured catalogs began producing an XSRF error when attempting to populate the SRM shopping cart with items from the c

  • WebDav could open URL as web folder

    Hi all, We have been using WebDav to update KM documents in our Portal. It stopped working recently and we are trying to troubleshoot. Steps:- Log into portal with an ID with the correct permissions Change the portal url from "http://<host>:<port>/ir