New RAM, and getting kernel attacks

I've bought myself a pair of 4 GB RAM for my Macbook Pro 2011. I bought from another dealer than Apple, but I made sure that the specs matched. But still i keep getting these kernel panics. Any ideas?

But still i keep getting these kernel panics
Still getting them, like you had them before you exchanged the RAM?
Then it's likely a software issue, return the factory RAM and run through these Steps (#3 Hardware Test for RAM too)
..Step by Step to fix your Mac

Similar Messages

  • My laptop died so I've installed itunes onto another PC and my music is all on an external hardive which is connected to the new PC. How can I sync my ipod with the new itunes and get all the music onto itunes?

    My laptop died so I've installed itunes onto another PC and my music is all on an external hardive which is connected to the new PC. How can I sync my ipod with the new itunes and get all the music onto itunes?

    You might consider itunes match for moving CDs you've copied into your itunes library if you dont have a way to use home sharing.
    iTunes match is an optional service offered by apple that costs about $25 a year.  It scans your music library and if it finds music that is already in apple's itunes catalog it'll automatically "unlock"/"store" these in the cloud for you.  Items that it does not find in the catalog it'll upload and store these in the cloud for you and you can download them on your devices.  See http://www.apple.com/itunes/itunes-match/

  • How do I create a new account and get stuff from the old account to the new account

    How do I create a new account and get stuff from the old account to the new account

    There are instructions on this page for creating a new account : Set up an Apple ID in iTunes
    Or if you don't want to give credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
    But you won't be able to transfer purchases from your old account to it, all content that you download from the store will remain tied to the account that downloaded it.

  • I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows 127

    I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows errors127

    See iTunes launch errors caused by iAdCore.dll.
    Review the rest of the user tip if required.
    tt2

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • How do I insert new record and get results on a landing page

    how do I insert new record and get results on a landing page

    It's not clear from your post what you are asking. In a SQL database, you use the INSERT statement to insert a row into a table. You use the SELECT statement to retrieve rows. Here's some basic info on how to do that within PHP
    PHP MySQL Insert Into
    PHP MySQL Select

  • I have a preorder and I can't find the credit card I used to buy it in the first place. Is there any way I can switch the payment to a new card and get my cd?

    I preordered a CD and I can't find the credit card I used to order it so I can't confirm the billing and recieve my CD Is there any way I can switch the payment to a new card and get my cd?

    Welcome to Apple Communities
    PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
    1. Open Disk Utility (Applications > Utilities) and select your drive
    2. Go to Partitions tab, press + button, create a new partition and press Apply
    3. Insert the Snow Leopard install DVD and reboot pressing C key
    4. Install it in the new partition
    5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7

  • Need help re-synching iPods with new computer and getting iTunes to...

    Need help re-synching iPods with new computer and getting iTunes to recognize our iPods (it doesn't even recognize them when they're plugged in).
    Hubby wiped my harddrive for me, so now I need to get everything back in proper places. I'm using windows XP and installed iTunes once again (I believe it's version 8). I also installed all of my iTunes songs. Now I need to know where to go from here. We have 3 iPods and I need to get them all synched once again. I know how to create different libraries for each of us, but I can't figure out how to get our songs back into our iTunes libraries. When I open iTunes and plug in an iPod, iTunes doesn't even show that an iPod is plugged in.
    What do I do now to get each of our iPods synched with our own libraries?
    TIA
    Brandy

    Thanks Zevoneer. The "Restart ipod service" worked and itunes is now recognizing my ipod! Hooray!
    Okay, now how do I synch all of our ipods with our individual libraries (I don't want all of my kids' songs and vice versa)? We each have hundreds of songs on our ipods that we don't want to lose.
    Thanks again!

  • Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

    Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

    This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
    This is a picture of what it looks like now:
    http://tinypic.com/r/107quxu/7
    As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
    any way to get around that?

  • Help! Installed new RAM and now screen isn't coming on!

    Hi
    I'm in a bit of a mess and would be grateful for any help with this one:
    I have a Powerbook G3 500mhz Pismo that currently has a 512mb card in the top slot (Kingston PB100/512) that I installed about two years ago with no problems and an original 128mb in the bottom. At Christmas I bought another 512mb for the bottom slot – (Kingston KTA-PBG4/512 - This one is smaller than the first but it was the one reccomended by Kingston on their website for the Pismo).
    I have just got round to installing it after backing up my system and I have good instructions on how to do it (I have replaced the HD two years previous with no problems)
    Firstly I have to mention that just before I changed the RAM the laptop fell from a small stool (about 1.5feet high) onto carpet due to the unbalancing effect of taking out the battery/CD ROM. It landed on its edge where the power socket is. I immediately put it back together and turned it on to make sure it was ok - it came on fine and there were no problems visually, mechanically or otherwise, so I carried on with the installation.
    I installed the new 512mb card in the bottom slot and re-assembled but when I turned it on the screen remained black! From the computer itself, however, it sounded as if it had started up ok – there was the chime and the familiar sound of the hard drive at start up.
    To troubleshoot I removed the new RAM card and put back the old RAM as it was – this made no difference. I checked to see if the processor board was firmly in place or if I had dislodged any connectors by mistake within the area that I had worked but this made no difference. I also tried to re-set the parameter RAM and this made no difference.
    Because the laptop took a small knock prior to installation, I am not sure if that has caused something to come loose or damage of some kind but as I mentioned I did test it immediately and it worked, so it’s either a delayed reaction or the new RAM card has caused it. – (As mentioned there is a difference between the two 512 cards in both name and size but the smaller size of the newer one I assume just reflects advancement in technology and it was reccomended by Kingston!)
    If anybody has any advice on this I would be very grateful (and also, if anybody can point me in the direction of instructions on how to take the pismo apart to get to the connections to the screen that would be great – in case I have to do it)
    Many Thanks Barry
    PowerBook G3500mhz   Mac OS X (10.3.9)  

    SpottyFox,
    It sounds like you are properly seating the CPU card from your description, so I don't believe that is your problem. I am glad you checked the pins (I should have mentioned that as the next step if the reseating did not help). I cannot answer whether anything was damaged from your description of the pins; I have read where others have realigned bent pins with success so maybe your mileage will vary.
    Start up your Pismo, then shine a flashlight directly into the display; if you can see data being written to the display, just the backlight is refusing to light. If this is the case, check the inverter board connections. The inverter is under the clutch cover and powers the fluorescent backlight in the display. Enlarge the bottom picture in this link to see the inverter:
    http://www.ifixit.com/Guide/Mac/PowerBook-G3-Pismo/Inverter-Page-10-Inverter
    Check connections at each end of the inverter. Disassembly is not as extensive as this guide suggests. Support the back of the display, then remove the main battery, optical drive, lay the keyboard on its face on the palm rest, heat shield, and clutch cover...that's it.
    http://www.ifixit.com/Guide/6.0.0.html
    You might also connect the Pismo to an external display; failure here would suggest a more serious problem.

  • Installing new RAM and need help!

    Hello everyone, I have this exact same computer model found here: http://wow-rebates.com/lenovo-3000-k100-57068352-intel-desktop-pc/
    This means that I have 4 slots of RAM, but 3 are currently being used by 1 GB sticks of DDR2 PC2-5300 @ 667. I just bought a stick of RAM today that is exactly the same as the other 3 (its a 1 GB stick of DDR2 667). However, after I installed it, it freezes at the first screen where it says "lenovo" in big white letters. It doesn't go any further than that, which is odd.
    Additionally, when using my new RAM stick with only 2 of the old ones (total 3 GB) it works fine, but whenever 4GB of RAM is in my computer it just isn't working properly. What might be causing my computer not being able to handle 4GB? Is there a dual channel option I have to enable or something? Help will be VERY much appreciated! =)
    Message Edited by kingholman on 08-25-2008 08:45 PM

    Hummm, did you get into the Bios screen and check to see if the 4th gig is runnin? will pop up as 4 gigs in Memory. If not move the sticks around, if not get a new stick. If it show in bios then it's working.
    In Vista though you only get 3gigs max unless you run 64bit.
    I am using Kingston for $27   working fine.
    Lenovo 3000K100 Intel Core2 Quad Vista Home Premium BFG 8800GT-OC 512MB PCIe 500GB SATA HD 4GB PC-5300 DDR2 DVD +/- RW DL x2 SATA Creative X-FI Pro + Mods

  • Just got new ram and new errors

    I picked up 2 F2-6400CL6D-8GBMQ G.SKILL 8GB (2 x 4GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL6D-8GBMQ - N…
    I'm running windows 7 32 bit intel core2duo 3.00GHZ geforce gtx 275 10GB ram. I upgraded and now i get "Could not complete the Auto-Blend Layers command because there is not enough memory (RAM)"
    My computer detected the ram and it works fine with all my games so far, so I'm really thinking this is Photoshops fault.

    Thank you for the reply.  I posted the info in a new discussion here:
    https://discussions.apple.com/thread/4155426
    If that link doesn't show up, here's what it says in the posting:
    Hey there - if anybody can help, I would sure appreciate it.  Our iMac just keeps getting slower and slower, even after I just upgraded the RAM (now it has 8 GB installed).
    I just went to the Apple Store, and they told me that I need an external hard drive for all of our movies and photos (but it doesn't seem like we have that many movies and photos.  I'm also getting a "Startup Disk" full message frequently.  I would appreciate any ideas anybdoy has.  It's hard to upload photos, so I'll try to type what I see:
    Free:     4.3 GB
    Wired:   790 MB
    Active:  2.4  GB
    Inactive: 461  MB
    Used:     3.6 GB
    space utilized: 635 GB
    space free: 4.1 GB
    There's a pie chart, and the "space free" is just a sliver.
    iMac, Mac OS X (10.7.4), 24", early '09, 8G RAM, 2.93 Intel

  • New RAM stopped my Kernel Panics on a MacBook

    I upgraded my Duo Core 1.83gHZ White MacBook to 2GB of RAM almost three years ago when purchased new.
    Sometime after upgrading to Leopard I started having frequent kernel panics. I ran Memtest several times and it never found a problem. I blamed Leopard and/or the MacBook itself as the machine was very stable under Tiger.
    About a month ago re-installed the MB's original 512MB of RAM and ran the machine for a few days without a single KP. Running a MB with 512MB or RAM is painful, so say the least...
    I ordered two 1GB sticks from a well-known company and the MacBook has run kernel panic free ever since, about three weeks now.
    Unfortunately the old RAM was not a lifetime warranty product. It cost me $176 back then. The new RAM was $30. :-O
    I hope others can learn from my painful lesson. I guess my biggest surprise is that the RAM seemingly went bad at some point.

    just had mine mended from apple
    the said it was  logic board the next day started  again  what now
    and  what you think

  • Installed 10.6.7 and Getting Kernel Panic on Boot

    I got the notice to update to 10.6.7 on my 15" 2.66 i7 and when it restarted to install the update, I immediately got a kernel panic. I was able to get it to boot into safe mode and I did a time machine backup. After some research and work..
    I ran a 35 pass zero out, and then straight reinstalled OS-X from my discs. I still get the same panic from boot.
    panic(cpu caller 0x5592711): Unable to find driver for this platform: \"ACPI\".\n"0/SourceCache/xnu/xnu-1504.3.52/iokit/Kernel/IOPlatformExpert.cpp:1 389
    Debugger caled: <panic>
    Backtrace (cpu 0), Frame : Return Address (4 potential args on stack)
    0x7a0bdda8 : 0x21b449
    ect, ect, ect,
    BSD process name corresponding to current thread: Unknown
    Mac OS version:
    Not yet set
    ect, ect, ect,
    Help...
    The only thing left that I can think of is that the update fubarred the HDD. I put an aftermarket 640GB drive into it about 3 months ago. I was considering re-installing the factory drive and see what happens. I have tried everything that I could within the OSX restore discs, and nothing seems to help. It seems weird that a 35 pass + restore didn't cure it, if it was software related. Which makes me think firmware/mechanical.
    Thoughts?

    I think you missed the part where I said:
    "I ran a 35 pass zero out, and then straight reinstalled OS-X from my discs. I still get the same panic from boot."
    I still had issues after a fresh install. So, I did a 35 pass zero out and re-installed. Same error.
    I just finished installing the factory drive, and mysteriously everything works fine now. Either the update corrupted the aftermarket drive, or the update causes the computer to recognize my aftermarket drive and make it "not work". Either way, I am just going to leave the factory drive in it, as I am selling the laptop and getting a newer version.

  • How can I transfer the application Keynote from my old computer to a new one and get rid of it on the old computer?

    My MBP from 2008 is being retired by my university and they gave me a new MBP.  They transferred everything from their image and all my iWork documents were transferred.  However, since I added Keynote, Numbers, and Pages, they did not transfer.  He said they cannot transfer them since they are not part of their image and active directory.
    How can I get the iWork apps to my new computer and disengage them on the old computer without paying another $60?
    Thanks so much for any advice.
    Best,
    HED

    If you installed them from a DVD, you need to install that DVD onto the new computer. If you got them from the Mac App Store, redownload them from there for free.
    Having previously purchased an application on DVD or from the iTunes App Store does not allow a free download of it from the Mac App Store.
    (71807)

Maybe you are looking for