New ram installed and now have black screen then it shutsdown
ive installed an extra 2gb of ram on hp630 notebook and when i turn on it has a black screen then shuts down after 1 minute. i think maybe one of the slots dont work as the original 2gb ram that in it works in one slot but not the other . so when i put the 2gb ram in i get black screen then shut down but its the same it works in the bottom slot but not the top. any help would be a massive help.
Hi
Seems to be an issue with the Memory slot which need to replaced. In case if you unit is still cover by the warranty i would request you to call HP Technical support and get the System Board replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Similar Messages
-
Hello! I want to sell my iphone 3g because i have 3gs- i cleared the info in settings and now have black screen saying no service and usb port pointing to itunes - is that all i do ? i am pretty ignorant of computers- lol- i had read that i need to plug it back into itunes to verify it has all cleared out- i want to sell it on craigs list or ebay- i am really hurting for money right now- all your answers appreciated...
It needs to be restored by someone. You can do it, and set it up as a new phone, or the buyer can do it.
-
New ram installed and have black screen then it shutsdown after 45 seconds
ive installed an extra 2gb of ram on hp630 notebook and when i turn on it has a black screen then shuts down after 1 minute. i think maybe one of the slots dont work as the original 2gb ram that in it works in one slot but not the other . so when i put the 2gb ram in i get black screen then shut down but its the same it works in the bottom slot but not the top. any help would be a massive help. the slot i am trying to use hasn't ever been used.
Hi
Sorry meant to add , have you tried re-setting your BIOS to Default just to make sure 100% that your BIOS setting is not causing an issue .
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem**** -
I just recently had a new hardrive installed and now i cant transfer my data
I just recently had a new harddrive installed and I cant seem to start it up properly
What exacty happnes when you try to startup?
Wha installed the HD?
What model MacBook Pro?
It it has Internet Recovery then boot into Recovey
OS X: About OS X Recovery
There you can use disk utility and reinstall the OS. Otherwise y owill have to boot for an Install Disk
BTW, this is the Mac Pro Desktop forum -
My Computer has just had a new windows package installed and now my "Device is not recognized" when I plug it in?
Microsoft Office is a program you would need to reinstall again.
As for data backup if you baid 200.00 for a cruddy job for just picture backups and a reinstallation of Windows, thats pretty bad.
I would ask the technician where your data is. basically you want to ask if he backed up your User directory -
Installed new memory , now have black screen
Upgraded to 6GB memory , now doesnt come on I have black screen
Put the old memory back and test the computer. If it works with the old memory you have either not installed the new memory correctly or those modules are the cause.
-
While I was asleep I believe my Macbook Pro downloaded some new software, I turned it on this morning and now I have this black screen with letter inside of it that says whatever is inside of it to me. It is very annoying as if I am online it will describe everything to me and move my screen. I am a student and cannot work or research when my computer does this. Can someone please help me figure out how to get rid of this?
to disable VoiceOver, press "command+F5".
-
Ipad was working fine and now has black screen and wont turn off or on or do anything
Ipad was working fine and now is a black screen. Won't do anything now
Is it charged? If not charge it with the supplied charger.
If charged, have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
pluuged in my I-pod to charge and screen flashed afew times and now says Disk mode and get it to turn off or do anything?
Take it to an Apple Store and they may take care of it for you.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My hard drive recently crashed and I had to have a new one installed, at the same time I upgraded to Yosemite since then I have not been able to get on my banks website to do any online banking. I just get a blank page after I log onto the bank. Any suggestions on how to fix this?
Using Safari? Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
Try another browser as a test.
Firefox -
New Windows install and now I have multiple copies of songs on my iPhone
Can anyone help me out? My solid state hard drive died a few weeks ago and I finally got a replacement yesterday. I installed iTunes and was lucky to have my old iTunes library.xml file backed up, which let me quickly get back up and running with all my music and metadata like play count. However, when attempting to sync my iPhone, it seems like the music that had been on it after the last pre-crash sync is considered part of a different library? Not only did none of the play count numbers for those songs update in iTunes for the weeks I had been listening to the same few songs over an over, but now I have two copies of all of them on the phone. These duplicates do not show up in iTunes. Is there any way to consolidate these songs? Thanks!
The cause was probably a USB glitch during a sync or when copying. The music resides on the phone in separate files. A master file contains a database with an index to the music, an entry for each track and a "pointer" to the file containing the track. Somehow the index got corrupted with duplicate entries. It's likely that the music itself wasn't duplicated, but some tracks had more than one entry in the database. I've seen this happen when syncing (rather than manually managing) also. In my case deleting the track from the Music tab in iTunes, syncing, then adding it back fixed it.
A related problem I've seen is an album may be split, with some tracks in each of 2 or more album entries in the listing. Fixed the same way. -
I have a 2003 ipod. New ASUS computer with my original itunes installed now.
Do I need to download a new version to save to the ipod to be able to transfer my music?
Please help!Hello Tamatha,
So you transferred your original iTunes library to your new ASUS laptop? If so, simply connect your iPod and keep syncing it as you always have.
B-rock -
So the ipod has been working working fine. I left it for almost 2 months and when i charge it again this is what i see!! It has not been dropped!! The Ipod still works ...when i connect it to itunes it responds normally. Also the ipod produces the charging sound and sounds for notifications!! i tried guessing where "slide to unlock" is so that maybe the touch screen still responds but yet it was useless!! what might be the problem!!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
PowerBook G4 - Won't Start Up - 3 Strange Beeps then just LED flashes and sudden death - black screen.
Prior that the powerbook also couldn't start but I could see the Apple logo, so via fire-wire (holding T at start up) I backed up the hard disk.
Check via DiskToolPro the structure, defragmented. Via DiskWarrior rebuild the directory
and finally not been able to access the drive I reformatted the drive via fire-wire drive.
Re-started the powerbook holding C to boot up from DVD - nothing
Re-started again and it give me one long beep and black screen. An indication that my 1gig RAM is bad or gone (?) and the DVD is stuck inside.
Bought new one 1 gig, installed it and now I'm getting only three beeps.
I tried all, changed the slots several times and nothing.
I tried more as:
c -- to boot from CD (again while the DVD is still inside and I cannot get it out)
cmd-opt-p-r -- to Zap the PRAM,
cmd-opt-n-v -- to clear NV RAM,
cmd-opt-o-f -- to boot into open firmware … and nothing. The DVD is in and I have
black screen with three beeps and flashing LED.
Do I have to replace the Logic Board? (Anyone has a spare one ?)
But it is the faulty Logic board?
Could anyone help me out? Please.
I'm retired and I cannot afford a new laptop - and this powerbook was a great, great horse for me until that horrible set of three beeps.
Thank you in advance for any advice and help.
Martin
THE SPECS OF MY POWERBOOK:
Model Family:
Powerbook G4 Aluminum
Processor:
1.67GHz G4 (PowerPC 7457B)
Manufacturer:
Motorola
# of CPUs:
1
Codename:
Apollo 7
Display:
Size:
15.2"
Finish:
Matte
Resolution:
1280x854
Backlight:
CCFL
Base Memory:
1gig PC2700 SODIMM
Brand:
Apple
Wireless:
802.11b/g
Color(s):
Aluminum
Original OS:
Mac OS X 10.6.3
Battery:
50-watt-hour removable lithium-ion battery
Graphics:
ATI Mobility Radeon 9700 (64MB)
Base Storage:
80GB 5400RPM EIDE 2.5"
Optical Drive:
8x Superdrive
Model Number:
A1106
Sales Number(s):
M9677LL/A
Machine Number(s):
PowerBook5,6
Dimensions:
13.7 in x 9.5 in x 1.1 in
Weight:
5.6 lb
Production:
Jan 31, 2005 - Oct 19, 2005
Factory:
China
Production Year:
2005
Production Week:
35 (September)
Production Number:
4240But it is the faulty Logic board?
There was a known issue with LBs in 15-inch PowerBooks with 1.5 and 1.67Ghz processors in which one RAM slot would fail. There once was a repair extension program that fixed the problem at no cost, but it is long-expired.
The problem with seeking a used logic board for these models is that so many had their boards replaced that it increases the chances of the boards in the used/pulled markets having the same problem you have now. The replacement program also came close to exhausting the supply of new boards,
If it turns out to be a bad LB and you can't find a replacement, consider how used computer pricing works: A used computer is worth hugely more in parts than if bought as a working unit. I.E, you can probably find a working PowerBook that will cost less than the logic bard alone. It also possible to find a used MacBook Pro for less that a replacement LB.
If you tell us your approximate geographic location, we can see what's available nearby. I'm also retired, and and visiting my wife's family this week so have even more time than usual to help you search.
Regards,
Allan Jones -
I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DOcarter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
Maybe you are looking for
-
Cannot Get Voice Control to Work
Just got the new ipod touch for xmas and i have to say it is absolutly amazing, so much better than i expected. However one major thing that is bugging me is the voice control won't work. I have the 32gb version and its the new generation (voice cont
-
Hi all, I'm new to jsp, please let me know how to use cookies with jsp. I have three web applications, in run time I have to switch from one application to another application based on single login page. I have taught cookies are one of the solution.
-
Confusion on iTunes Plus Files and Computer Authorization
I wonder if someone could help me alleviate some confusion surrounding iTunes plus files and computer authorizations. I personally also have iTunes match on my account. Reading online it appears that all iTunes Plus files do not not have DRM. I have
-
Regarding the Oracle certification
Hi, To become a Oracle Certified Associate, One has to pass Two exams. They are (1Z0-007 OR 1Z0-001) And IZO-147. I'm an application developer. so My doubt is whether i should go for 1Z0-007 OR for 1Z0-001 for the first paper. If any one can differen
-
I have anonymous logon to the portal at http and when users click on the log on button I want they to automatically be redirect to https. Is there any easy way to solve this?? Regards, Micke