New ratio doesn't appear in Bex Query designer
Hello Experts,
I added 2 ratios to my infocube. It activated without any problem. I then added these 2 ratios to my multiprovider and activated it after affecting them to the previous infocube.
Then I connected to the Bex query designer and loaded a report in order to add these ratios, but there are not available for selection in the Ratio menu of the multiprovider.
Has anyone faced this problem?
Thanks
Try reactivating the Multiprovider again and see if that works !
I had this issue earlier, where I couldn't see two of the newly added characteristics in the multiprovider. But simply reactivating the multiprovider solved my issue.
- Danny
Similar Messages
-
Drilldown in BeX Query Designer
Hello,
I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
Warm Regards,
DebayanHi Debayan,
first of all, what is your requirement to create a drill down?
A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
1. Master data-Navigational Attributes
2. Master data- Hierarchies
3. Free characteristics
As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
Please share your exact requirement.
Hope this helps.
-Swati. -
% Calculactions in Bex Query Designer
Hi Experts,
Could you please on how can i perform the below % Calculactions in Bex Query Designer.
Vendor No line item Not = L category =A status =RFQ :for items
Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
requament: % RFQ Without Response:
Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
( 4/5 * 100= 80%)
Percentage RFQ without response= 100 - Percentage of Quotation response
= 100-80 = 20%
How can i perform the % Calculations in Bex Query Designer.
Vendor
Purchasing document
Indicator: Line Item
Purch. doc. category
Purch. doc. status
Item
Number of Records
category A item L
200274
V-LINE EUROPE EXPORT MARKETING
6000003778
L
A
Not assigned
10
1
20
1
30
1
6000003779
Not assigned
A
Not assigned
40
1
9000000046
Not assigned
A
RFQ
10
1
1
20
1
1
30
1
1
40
1
1
Result
8
4
thank youHope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
Your formulas seems to be straight forward.
Keep in Filter: item Not = L category =A status =RFQ
You may start working on it and get back with if you are struck. -
Usage of formulas in conditions in BEx Query Designer
Hi guys,
does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
Any ideas or are there any bugy in the BEx Query Designer?
Thanks a lot + best regards,
ClemensHi Clemens,
I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
1) Condition is marked as Active.
2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
Now you are ready to use the condition.
Regards,
Durgesh. -
In Bex Query designer - Flat is not supported
Hi all,
In Bex query designer,
While execution of the query, the following error is coming .
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Flat mode is not supported!
java.lang.UnsupportedOperationException: Flat mode is not supported!
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
Details: Full Exception Chain
Most important error.
regards
SelvanHello,
I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
Open, close, reload of the query does not help.
Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
The "flat-mode" seems to be the "BEx table mode".
SAP hints do not seem to fit here:
- 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
- 874825 SAPBWNews for BW 3.x Front-End Support Package 19
- 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
- 905229 update to SAPTableTree
- 909824 Termination in flat mode when an object is deleted (old?)
- 909827 Incorrect InfoProvider-dependent characteristic values
- 910602 Condition includes too many characteristics (usage of deleted elements)
- 915215 Termination when a query definition is changed (old? visibility of elements?)
- 968273 Cache with flat files: Exception is not caught (does not apply to given error)
Any new solutions?
Best regards
Thomas -
IF...ELSE.. STATEMENT in BEx Query Designer
Hi,
Why there is no IF, ELSE function in BEx Query Designer?
Assuming I need to write the following logic, how can it be accomplished?
IF (A=0 OR B=0)
THEN 0
ELSE IF ( B/A <0)
THEN ' *'
ELSE
B/A * 100
i.e.
if A or B is equal to 0, then display the value of 0
else if B is negative (as A is either 0 or positive), then display the following text: ' *'
otherwise, display the value of B/A * 100
Thanks!Hi,
You can achieve this by creating a new formula.
You have to use the boolean operations and mathematical functions. But we cannot display *. u have to display some value for that.
Khaja -
Infoprovider documentation in BEx query designer
Hi Experts,
While users creating queries in BEx query designer (BI7) they have to see the predefined documentation about that inforprovider. Can we achive this requirement?
What is the use of "Documents" in BEx query designer? Can we show the documentaion under this area?
Thanks in advance.
thanks and regards,
RajuHi,
Plese go through these links which provides you detailed view on Documnet Navigator and Creating/Editing Documnets in it
Business Document Navigator :[http://help.sap.com/saphelp_nw70/helpdata/EN/dd/f5253715dfb808e10000009b38f889/content.htm]
Creating New Documents:[http://help.sap.com/saphelp_nw70/helpdata/EN/df/77ff72021311d3ae4b0000e82deb58/content.htm]
I hope this helps you.
Regards,
Rajknadula -
Creating Restrictions in BEx query designer for (1-a), where a is variable.
Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
JeraldMy requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald -
Group by in BEx query designer
Hello experts,
I'm new in BEx query designer and I'm currently working on displaying the maximum of a list of values and group them by calendar day like the exemple below:
CalendarDay
Client
Amount
02.09.2014
A
3000
02.09.2014
B
2000
03.09.2014
A
1500
03.09.2014
B
1600
The result I need to display is as below:
CalendarDay
Amount
02.09.2014
3000
02.09.2014
2000
OverAll result
3000
03.09.2014
1500
03.09.2014
1600
OverAll result
1600
What's the best solution for this ?! is it to work with calculated Key Figure or Exceptions ?! Would any one help me to get such result.
Thanks a lotIf you need to show the data as you mentioned then i think you are suppose to keep client in rows and also you have to switch on the result row display for that characteristic.
Because if you remove it then data will get aggregated based on calday and it will become 2 records only.
To get the maximum value you have to use Exception aggregation.Create a new formula and put the amount kf inside it.Hit the aggregation tab--Exception aggregation as maximum--Reference characteristic as client.
If this does not work then we can also apply nested aggregation based on calday.
Regards,
AL -
Error in opening Query in Bex Query Designer
Hi all,
I am getting an error while opening the InfoProvider for a new Query in the Bex Query Designer.
program error in class SAPMSSY1 method : Uncaught_exception.
ASystem error in program CL_RSR and form GET_COB_PRO-02
In RSRT:
00000003 I>> Row: 78 Inc: LRRMSU13 Prog: SAPLRRMS
00000003 ASystem error in program CL_RSR and form GET_COB_PRO-02- (see long text).
With RegardsHi Raju,
Check for the authorization
Auth object : S_RS_ICUBE , S_RS_MPRO,S_RS_ISET
Infocube subobject -> aggregate ,data ,definition.
Auth object S_RS_COMP
Activity 01, 03, 16, 22
And let us know ...
Hope that helps.
Regards
Mr Kapadia -
Error while openening InfoProvider in Bex Query Designer
Hi all,
i am getting an error while opening the InfoProvider for a new Query in the Bex Query Designer.
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Exception CX_RSR_MESSAGE in program SAPLRRMS
RRMS_X_MESSAGE
Main Program: SAPMSSY1
Include Program: LRRMSU13
What could be the problem?
Thanks in advance
AndreasHello Andreas,
seems as if JCo Connections on your system have not been set up correctly.
Please have a look here:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
Regards,
Daneil -
In BI Bex Query Designer output, dont want to have unit at column Heading..
Hi
I have a BI Bex Query Designer report showing output with Qty unit at Column Heading level. Even in KF's Text i didn't mention unit. I want unit to appear to column fields instead of column heading. Pls let me know how to do that.
One more thing is: i have 2 reports exactly same except due date range is different. first report showing unit for each KF at the column heading level and for 2nd report showing column fields level... Surprising. Pls let me know what is the reason and how to control it.
Thanks...Hi Harpal,
Key figures can have scaling factors and units/currencies. Normally, units/currencies are displayed for every key figure, but not the scaling factors. If you activate the Display Scaling Factors for Key Figures, an additional header row is added to the row or column header. Information about the scaling factor and currency/unit appears in this additional header row, as long as it is consistent (for example, 1,000 EURO).
For more information, You can go through
http://help.sap.com/saphelp_nw04/helpdata/en/e0/52029f961aa84d869b9b20fa7f7646/frameset.htm
Hope it helps & resolves your issue.
Regards,
Pavan -
Giving Error while opening BEx Query Designer.
Hi all,
A user is trying to open BEx Query Designer 7.0 and she is getting this error
" SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were middle of something, the information you are working on might be lost. "
She is not having issues while opening BEx Analyzer. She is having Office 2010. This doesn't seem to be compatibility issue with the Office. This BEx was not installed on her machine 2 weeks back and it was working fine until now.
As a first re-solution i told her to get it re-installed but still she is getting the same issue.
Thanx.Hello,
There is no relation between Office VS Query Designer. Only with BEx Analyzer and MS Excel.
My suggestion is.
If you don't have version 7.20 of SAPGUI and Business Explorer, please download the installer.
After that, download the latest patch available and install:
http://service.sap.com/swdc
> Support Packages and Patches
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Win32
_ > * gui720_5-10007878.exe
| > BI ADDON FOR SAP GUI
| > BI 7.0 ADDON FOR SAP GUI 7.20
|_ > * bi720sp03p_301-20006596.exe
|
| > BI ADDON FOR SAP GUI
| > BW 3.5 ADDON FOR SAP GUI 7.20
| > Win32
|_ > bw350gui720_5-20006857.exe
If persist, let me know.
Cheers
Edward John -
As Bex Query design why I canu2019t select from list in values range
Hello experts,
I want to pop input window when I use analyzer run bw report, I know to add filter through restrict, then I selected value ranges, it was appearing between input text, the button canu2019t let me input, I tried select from list, Bex Query design occured some errors, if click u2018exitu2019 will prompt unknown software exception(0xc00200001) then stop .
the imange: [http://www.itpub.net/thread-1192217-1-1.html]
How to input text or select list? Why My Bex query design canu2019t do select from list?
please let me know the soultions, thanks for you help in advance
Regards,
Stevefirst of all, thanks for your help. if need to install batch, please let me know. many thanks .
more infomation as belows:
the windows prompt:
Your application an unhandled exception occurs. If you click [continue], the application will ignore the error and try to continue. If you click the [end], it will immediately close the application.
I clicked more detail button , displayed as belows:
For more information call using Just-In-Time (JIT) debugging details
Please refer to the end of this message (instead of this dialog box) information.
Exception Text **************
System.NullReferenceException: Object reference not set to be the implementation of individual objects
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.HandleUnhandledException(Exception iException)
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
in System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
in System.Windows.Forms.Control.WndProcException(Exception e)
in System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
in System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
in System.Windows.Forms.Control.SetVisibleCore(Boolean value)
in System.Windows.Forms.Form.SetVisibleCore(Boolean value)
in System.Windows.Forms.Control.set_Visible(Boolean value)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
in System.Windows.Forms.Form.ShowDialog()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.GetUserSelection()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.ShowSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.InvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.OnInvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.picValueHelp_Click(Object sender, EventArgs e)
in System.Windows.Forms.Control.OnClick(EventArgs e)
in System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
in System.Windows.Forms.Control.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
inSystem.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) -
BEx Query Designer - Url openining problem
Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name UT Code Short Name Description Activation Date Configured
SAP NetWeaver 2004s BI BI Java BI Java Mon Aug 11 00:00:00 IST 2008 YES
SAP NetWeaver 2004s AS AS Java Application Server Java Mon Aug 11 00:00:00 IST 2008 YES
SAP NetWeaver 2004s EPC EP Core Enterprise Portal Core Components Mon Aug 11 00:00:00 IST 2008 YES
SAP NetWeaver 2004s EP EP Enterprise Portal Mon Aug 11 00:00:00 IST 2008 NO
SAP NetWeaver 2004s AAS AS ABAP Application Server ABAP Mon Aug 11 00:00:00 IST 2008 YES
Please correct me where to configure default host name
Regards,
Ravi ghangurdeDear all.
Below are the details probelm .
i want to open the portal nwa using url "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde
Maybe you are looking for
-
Price difference in goods receipt with ref of purchase order
Dear all, I am getting a difference in price with a goods receipt( movement type 101) which was created with reference to a purchase order. The purchase order price and G.R price are extremely different. I checked the inforecord..but price
-
I have 286 separate pdf form files that I need to combine to one pdf file so that I can export the text into a spreadsheet. Problem is that when I combine the files, Acrobat replaces the data on the forms with the data from the first file. For exampl
-
Im using my Ipad 2 and sometimes when I try to look a photo on facebook te screen turns black
Hey ! I was using my Ipad normally when I tried to look some photos on facebook and suddenly the screen turns black, but everything else works good, i just need to press "back button " and I can turn to Facebook and the screen looks normal. I would r
-
CS6 Acrobat Pro Windows 7 Install Error
I tried several times to install cs6 and always get an error, I have not been able to install it, can you please help me? Thanks Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: D
-
Any clues on this error trace? Flash Builder compiling for iOS...
Hi, All of a sudden, I am seeing the following when I try to compile an app for iOS: [code] Error occurred while packaging the application: # A fatal error has been detected by the Java Runtime Environment: # Internal Error (0xe06d7363), pid=3736,