New records or modified records field name in database table
hi am working on HR Payroll module. I want to know in new records are added in table PA0015 , how can we recgonize means is there any status field from which we can get it?
Hi,
Try using following fields in PA0015.
AEDTM
UNAME
HISTO
Regards,
Shashank
Similar Messages
-
To modify a field in a database table based record identification by primar
hi
i want to to modify a field in a database table based record identification by primary key filed and two more fields
ie customer (primary key
i want to modify record from intenal table the record existing with primary key field customer
the status field needs to be mofied as " value rolled"
the below code is happening
loop at it_record into wa_Record
wa_inv-customer (primary key) = wa_Record=custome
wa_inv-date = wa_Record-date
...so one
append wa_inv to it_invest
clear wa_inv
endloop.
if not it_invest is initial
modify TABle1 ( this table is data base table which needs to be mofified) based on the primary key field
and also date field and status field which is not primary key.
regards
aroraHi there.
Your requirement is to update a Z Database table from your internal table, right? You have several options:
LOOP AT it_invest INTO wa_inv.
UPDATE dbtable
SET date = wa_inv-date
WHERE prim_key = wa_inv-prim_key
AND any_field = wa_inv-any_field.
ENDLOOP.
or
LOOP AT it_invest INTO wa_inv.
UPDATE dbtable FROM wa_inv. "if wa_inv of same type of dbtable
ENDLOOP.
In the first example, I wrote any field because you can update dbase table, filtering for fields that don't belong to the primary key. However, remember that you will change all records that respect the key you used (so, in your case, use the primary key).
Regards.
Valter Oliveira. -
Hi,
Can we give the filed names start with '/' character, (like /name)? I saw like these field names in standard table MARA. How we create those fields in Z tables?
Thanks.That are fields in Include structure.
Yes u can create field with / in ur ztable.
first create a structure by selection data type radio button in se11.
in that structure create fields with /.
NOTE: field must have 2 /.
i.e ur field must be /str/struct1.
activate it.
now in ur database table goto edit menu select
include->insert
Give ur structure name .
Message was edited by:
Kalpanashri Rajendran -
How to modify or put entry in a particular field of a database table
i want to to modify a field in a database table record identification by primary key fileds
the situatio is like this
there are two primay key in database table
customer number PK
status PK
date
and third field which i want to modify is customer part number.
based on condition that
database table1-cuspip = wa_record-cuspip.
database table1-status <> wa_record-status
and database table-date = wa_record-date
if above is true a particular field the database table for that record
ie customer_part_number = 'FAiled'.
loop at it_record into wa_Record
endloop.
please suggest how to modify the database table record if the avove condition is tru and please give me full working code
regards
AroraDear Nishant,
Use UPDATE function for updating the customer part number.
But please do mention the database table and the keys used for update.
if en entry already exists with the key then the Entry will fail so use MODIFY statement to modify the Consumber Part Number with the specificed keys and transport the modified customer part number and then do COMMIT the changed entry to database.
Hope this helps you in some way.
Encourage others to answer you queries by suitably rewarding them.
Thanks
Venugopal -
Alerting about new records in to the database (in perticular table).
Dear membsers,
Alerting about new records in to the database (in perticular table).
i have a sample application like this.
A form based on purchase_requisitions, the data being entered from a network computer by a user with datanetry privileges. let's say the columns are
req_id,req_date,red-from_dept,req_from_emp,req_item_req_qty,req_status. (initially by default req_status is 'NEW').
next..
i have a form based on Pending_requisitions_view for the managers who approves the requisitions, the columns are just req_date,req_from_dept,req_from_emp. all the pending requisitions will come here every 5 minitues it gets refreshed by a timer. and it is a multi record block. from here the manager selects the record and he changes the status to APPROVED or DENIED. this is common scenario.
here is the main problem, the manager has to keep open his form all the time, or if he is working on any other things/forms, it is not possible for him to see requisiotns unless he has to open that form and timer re-freshes the records then only he can see. and again when the application in minimised state we cant see any updates/new entries into requissitions.
im trying to make a full pledges online system. im using Oracle 8i,forms 6i under win 2000.
is there any possibility if there is any new records gets into that table we can have alerts like Yahoo messenger it changes color to Blue when it gets new message if it is minimised state.
Please im keen to get this type of environment.
Thanks in advanceHi,
i tested like this,
create a table-1 with tow coumns
table-2 clone to table-1, on table-1 i put on-insert trigger insert into table-2. so far it is good, table-2 is getting values.
on table-2 i wrote a database trigger like this
CREATE.. ON INSERT on each row..
begin
IF INSERTING THEN
raise_application_error;
END IF;
end;
now the data not at all getting inserted into any table raising_application_error, so i could not proceed into further..
please advise me..
Thanks a lot -
How to get the field names of a table
hi all,
i need to get all field names of a table. here i dont need any data. i need only field names.
initially i used this query, select * from tname;
the problem is if table have 1000 records, all records will be in memory.
how to get this one.
regards
pavan.hi all,
thanks a lot. the query is working.
initially i given this query
select column_name from user_tab_columns where table_name='mytable';
but no rows selected.
and i tried with this,
select column_name from user_tab_columns where table_name='MYTABLE';
this is working fine.
thanks
pavan. -
Modify the Field Type of standard Table fields in a Query
Hello. I have a question.
Is there a way to "modify" the field type for standard table fields that are included in a Query?
I made a simple query out of a join of tables, but several fields have a lot of decimals, and I would like to present them in the query without any decimals, just as a regular "N" field.
I tried the possibility of creating extra local fields where all I do is transfer the value to the new "N" field, but I have many fields like this, so if there's a better way; I'd prefer that.
Maybe somewhere in the InfoSet there's a way to modify the type of the standard table fields?
Thank you.Hi,
This document may help you out.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/d2/cb4468455611d189710000e8322d00/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/d2/cb4468455611d189710000e8322d00/frameset.htm]
Cheers, -
How to return all field names in a table
How do you write a report to return all field names in a table? I prefer the field names in a column.
Thanks
WayneHi,
In Oracle it is,
Select column_name from user_tab_cols where table_name = 'Table_Name';
Note: Table_Name should be in capital letters
In MS SQL Server it is,
SELECT Column_Name + ', '
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'Table_Name'
Hope this helps!
Thanks
-Azhar -
How to retrieve the Field Name of a Table
Hi guys,
I'm trying to retrieve the field name of a table in java, but i don't know how to do it. Could somebody help me?Let say i have a table name Itemmaster, then
i want to retrieve its field and display to dos prompt.
Example :
Item No.
Description
Quantity
It is possible to retrieve the fields?
What could be the possible command in java using packages Java.sql.*?
Thanks in advanced...
Best regards,
DharryThe ResultSet class, which is how query results are returned in JDBC, has methods to get at the metadata for the table queried, including column names:
ResultSet resultSet=statement.executeQuery("select * from table");
resultSetMetadata=resultSet.getMetaData();
resultSetMetadata.getColumnLabel(column+1); -
Change All Field Names in a Table to have a Lowercase First Letter
I have an SQL database with many tables. All of the field names in each table start with an Uppercase letter. I would like to programmatically change all of the field names in each table to start with a lowercase letter. Can this be done?
E.g.: "FieldName" to "fieldname"
Thanks.O.K. Just in case anyone else runs into this, I used Carl's answer to guide me in the right direction. This is my final code that created the commands I needed to run a batch (where TMaster is my schema name and the WHERE statement contains
the datatypes in your tables):
SELECT
'EXEC SP_RENAME ''TMaster.'+TABLE_NAME+'.'+COLUMN_NAME+''',
'''+LOWER(SUBSTRING(COLUMN_NAME,1,1))+SUBSTRING(COLUMN_NAME,2,255)
+''',
''COLUMN'''
FROMINFORMATION_SCHEMA.COLUMNS
WHEREDATA_TYPE='int'. -
Displaying Field name in a table
Hi,
I want to display the field names in a table.
Is it possible to achieve this through coding?
Regards,
Ram.Hi,
Please explain the requirement clearly.
Where you want to display the field names of the table.
Regards,
Umasankar -
Extracting Values of a Field from a Database Table in SAP ECC System
Hi,
I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
"6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
I did not find WA elemen in Output element of Repeater_0
How can I create WA element?
Thanks.Cemil,
Set up a SAP JCo Interface action block. Use the RFC name RFC_READ_TABLE.
In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
<?xml version="1.0" encoding="UTF-8"?><FIELDS>
<item>
<FIELDNAME>MATNR</FIELDNAME>
<OFFSET/>
<LENGTH/>
<TYPE/>
<FIELDTEXT/>
</item>
<item>
<FIELDNAME>MTART</FIELDNAME>
<OFFSET/>
<LENGTH/>
<TYPE/>
<FIELDTEXT/>
</item>
<item>
<FIELDNAME>BSTME</FIELDNAME>
<OFFSET/>
<LENGTH/>
<TYPE/>
<FIELDTEXT/>
</item>
<item>
<FIELDNAME>XCHPF</FIELDNAME>
<OFFSET/>
<LENGTH/>
<TYPE/>
<FIELDTEXT/>
</item>
<item>
<FIELDNAME>DATAB</FIELDNAME>
<OFFSET/>
<LENGTH/>
<TYPE/>
<FIELDTEXT/>
</item>
</FIELDS>
Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}. You may run into problems with two other fields and optionally they can be removed (set link type to remove xml). I usually remove them initially for testing. The two fields are:
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~". I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
Once you get this one working, we can explore how to do filtering on the dataset. Your output should be something like this:
<?xml version="1.0" encoding="utf-8"?>
<RFC_READ_TABLE>
<INPUT>
<DELIMITER />
<NO_DATA />
<QUERY_TABLE>MARA</QUERY_TABLE>
<ROWCOUNT>20</ROWCOUNT>
<ROWSKIPS>0</ROWSKIPS>
</INPUT>
<TABLES>
<DATA>
<item>
<WA>000000000000000023ROH 00000000</WA>
</item>
<item>
<WA>000000000000000038HALB 00000000</WA>
</item>
<item>
<WA>000000000000000043HAWA 00000000</WA>
</item>
<item>
<WA>000000000000000058HIBE 00000000</WA>
</item>
<item>
<WA>000000000000000059HIBE 00000000</WA>
</item>
<item>
<WA>000000000000000068FHMI 00000000</WA>
</item>
<item>
<WA>000000000000000078DIEN 00000000</WA>
</item>
<item>
<WA>000000000000000088FERT 00000000</WA>
</item>
<item>
<WA>000000000000000089FERT 00000000</WA>
</item>
<item>
<WA>000000000000000098HALB 00000000</WA>
</item>
<item>
<WA>000000000000000170NLAG 00000000</WA>
</item>
<item>
<WA>000000000000000178NLAG 00000000</WA>
</item>
<item>
<WA>000000000000000188NLAG 00000000</WA>
</item>
<item>
<WA>000000000000000288HALB 00000000</WA>
</item>
<item>
<WA>000000000000000358HAWA 00000000</WA>
</item>
<item>
<WA>000000000000000359HAWA 00000000</WA>
</item>
<item>
<WA>000000000000000521HAWA 00000000</WA>
</item>
<item>
<WA>000000000000000578FERT 00000000</WA>
</item>
<item>
<WA>000000000000000597HAWA 00000000</WA>
</item>
<item>
<WA>000000000000000598VERP 00000000</WA>
</item>
</DATA>
<FIELDS>
<item>
<FIELDNAME>MATNR</FIELDNAME>
<OFFSET>000000</OFFSET>
<LENGTH>000018</LENGTH>
<TYPE>C</TYPE>
<FIELDTEXT>Material Number</FIELDTEXT>
</item>
<item>
<FIELDNAME>MTART</FIELDNAME>
<OFFSET>000018</OFFSET>
<LENGTH>000004</LENGTH>
<TYPE>C</TYPE>
<FIELDTEXT>Material Type</FIELDTEXT>
</item>
<item>
<FIELDNAME>BSTME</FIELDNAME>
<OFFSET>000022</OFFSET>
<LENGTH>000003</LENGTH>
<TYPE>C</TYPE>
<FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
</item>
<item>
<FIELDNAME>XCHPF</FIELDNAME>
<OFFSET>000025</OFFSET>
<LENGTH>000001</LENGTH>
<TYPE>C</TYPE>
<FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
</item>
<item>
<FIELDNAME>DATAB</FIELDNAME>
<OFFSET>000026</OFFSET>
<LENGTH>000008</LENGTH>
<TYPE>D</TYPE>
<FIELDTEXT>Valid-From Date</FIELDTEXT>
</item>
</FIELDS>
<OPTIONS />
</TABLES>
</RFC_READ_TABLE>
Add a repeater sourced on:
SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
Link your repeater output to a tracer with this:
Repeater_0.Output{/item/WA}
What you will see in each tracer message is a single line of data with all the fields contents concatenated together. You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc. Then you can parse out the data you are interested in.
Give this a try and let me know how you succeeded.
By the way, I could not find the scenario you referred to. Can you post a link?
Regards,
Mike
Edited by: Michael Appleby on Jan 12, 2009 5:16 PM -
To replace values of one of the field in the database table
How to replace values of one of the field in the database table with a new values? Pls help to solve
Hi
You can use the UPDATE command to update one of the field value in a table
see the UPDATE syntax and use it
but in real time you should not do like this
Regards
Anji -
Do you know of a standard tool to compare the fields of 2 database tables?
do you know of a standard tool to compare the fields of 2 database tables? please note i dont want to compare data just the fields.
~SureshHi,
I am not aware any standard tool but you can write custom report to use FM DDIF_FIELDINFO_GET to get fields information of SAP database table.
Call the above FM twice in order to get field names for two different database tables. Then compare the results (table parameter DFIES_TAB) to find out the differences of field names.
Hope this will help ...
Regards,
Ferry Lianto -
How can i update the REMARK field in ADRT database table
Hi all,
How can i update the REMARK field in ADRT database table
By using Function modules or BAPIs
Please reply me fastHi,
you can try this code:
SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
IF sy-subrc = 0.
CLEAR adrct.
SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
IF sy-subrc = 0.
adrct-remark = wa_remark.
MODIFY adrct.
ENDIF.
ENDIF
best regards,
Thangesh
Maybe you are looking for
-
I was doing an update to my iTunes and it did not reinstall properly. Now I cannot open iTunes at all on my laptop. What are the fixes?
-
Error message when installing software on my HP Laserjet 1536dnf MFP
I am trying to install the software on my HP computer for my HP laserjet. I have tried manually and using the assistant.The software getsto 87% installed then gives a fatal error occurred preventing product use. Click cancel tp cancel install. none
-
When you can use Airplay without the need to connect to a wireless router?
My question / request is, when you can use Airplay without the need to connect to a wireless router? Able to connect your iphone / ipod touch / ipad to your Apple TV directly without a wifi router, something like a "Airplay Direct"
-
Network assistant can't find my router. The led from the LAN on the router doesn't go on and I'm afraid the Ethernet card is not working anymore. Wireless is no problem. I test the computer with the test software from apple and it gives no errors. Ma
-
Custom formula YTD for PERIODIC Application - BPC 7.5 NW
Dear all, The customer has 2 time hierarchies, fiscal year and calendar year. He would like to change the measures formulas to fix their fiscal year specification, their fiscal year begins in April instead of January. Some entities of the customer wi