New Report

I have to make new report in which the output are : name of vendor, category, material, order value, rate unit for the product, last purchase price.
what field name and table i will take. Plz help...

Hi There
Report-Me2M and Table-EIPA data will provide the required details as you want
Thanks
Senthil

Similar Messages

Report Generation: New Report.vi

Running applicaion in development mode works fine.
After compiling however I get Error 7: Open VI Reference in New Report.vi
Why am I getting this error?

Has the version of Office on your machine changed since you installed the Report Generation Toolkit? The VIs will become broken if the ActiveX interface changes, and this can happen when the Office version changes. I recommend uninstalling and reinstalling the toolkit. Also, what version of Report Generation Toolkit are you using? The latest version is 1.1.1.
-D
P.S. - I'm going to respond to your other thread that you started with a link to this one. Instead of creating multiple messages on the same question, just wait for a response to your initial thread.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Error 7 occurred at open vi reference in New Report.VI

Hello!
I use the report generation toolkit on LabView 7.0 to create a report in Excel. The program works fine until I make an executable version. I the get the error:
Error 7 occurred at open vi reference in New Report.VI
I use the New Report.VI, Bring Excel to front.VI and Save Report To File.vi
Can you pleace help me!!!

Most likely, you did not include the required libraries in your build script. When building an executable in which you use the Report Generation Toolkit, you must include the _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs on the Source Files tab.
Check this article for more info.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
Daniel L. Press
PrimeTest Corp.
www.primetest.com

ABAP: Developed new Report for Summarized JIT (Just In Time) calls

Hi to all,
Can anybody please tell me about the following:
· Developed new Report for Summarized JIT (Just In Time) calls: This report is for Delco Singapore needs all Summarized JIT calls created between selected dates to be closed. If JIT call quantity is 0 and GR quantity is also 0, then GR flag for JIT call to be checked and JIT call will not be shown open. If the JIT call quantity is greater than zero and GR for JIT call quantity is zero then JIT call quantity made as zero and GR flag for JIT Call to be checked. Once it is checked the JIT call will not be shown in Open.
Thanks in advance.
Regards
Monalisa

Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region
You would do all these steps for your advanced search page as well, so that in your main jsp, you can call asfPage.setAdvancedSearchPage() with the attribute name of your advanced page.
What I Still do not know is:
(1) My main page keeps coming up saying that there is no default query defined for it. How do you create a default query for a report?
(2) How to get the personalization to work.
Can anyone help?
Thanks!

LV 8 problem with New Report.vi in compiled program

I'm a novice LV programmer trying to finish my first project. The project is the automation of an air flow stand using field point for acquisition/control. Have the code written and everything seems to work fine until I compile. Specifically, I get an error when I attempt to open an Excel template (XLT) using the New Report.vi included in the report generation add on. When the compiled executable run I get a message with the header "Error 7 occured at Open VI reference in New Report vi>report2.vi>auto air flow testing.vi . And then in the body of the message is says:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux.
NI-488: Non-existent board.
VI Path: C:\builds\auto air flow\My Application\auto air flow 1a.exe\Excel_Open.vi
Built Application or Shared Library (DLL): Make sure all dynamically loaded VIs were properly included in the build specification for the application or shared libr
The input to the New Report.vi template connector is C:\Air Flow Data Files\templates\psc.xlt. Again this works in design so I believe the formatting is correct and the file does exist.
Why would this work in design environment but not the compiled program? I recompiled several times and even tried reinstalling the report generation tool kit. Any help or pointers would be greatly appreciated. I will be happy to supply more info if necessary. thanks.

Okay, I found the solution by doing a search here on 'Error 7". My thanks to those who have posted the solution in the past. Regards

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Unable to Compile New Report.vi

Error 7
Error 1003
I am unable to compile the New Report.vi from the Report Generation Toolkit.
I have Windows 2000 and LV 7.1.
I have Forced Re-Compliation of all my VIs (Ctrl-Shift-Run)
I have tried adding Dynamic links in my App build.
What else can I try?

Duplicate post, see original thread here.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

高手快帮忙谢谢labview7打包后用到7中新的new report.vi的地方(选择的是word)都提示error 7 occurred at open vi reference in new report.vi

高手快帮忙谢谢
labview7打包后用到7中新的new report.vi的地方（选择的是word）都提示error 7 occurred at open vi reference in new report.vi。
下面提示的可能原因是Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on UNIX.
我愿自己是个胡萝卜，可以自己自足啦!

我明白您的意思，也可以按您所说的作，
但是open vi peference这个vi是labview提供的标准new report.vi的子vi中使用到的，如果我手动修改open vi peference中的提供的word路径，也就是说labview提供的模块也要自己修改了??
我愿自己是个胡萝卜，可以自己自足啦!

How to use "machine name" in new report vi?

I have a computer on a network that has Microsoft excel installed. On another computer I have an application that will take an excel file and stuff a bunch of data from a database into specific cells to generate a report. The vi works fine on my computer (where excel is loaded locally) but when I try and run the VI and access excel remotely I get an error message as follows:
Error -41106 occurred at NI_Excel.lvclass:new report subVI.vi -> NI_report.lvclass:New Report.vi -> printTestSheet.vi
Possible reason(s):
Report Generation Toolkit: Microsoft Word or Excel did not open. Make sure Microsoft Word or Excel is installed.
Error -41106 occurred at NI_Excel.lvclass:new report subVI.vi -> NI_report.lvclass:New Report.vi -> printTestSheet.vi
Possible reason(s):
Report Generation Toolkit: Microsoft Word or Excel did not open. Make sure Microsoft Word or Excel is installed.
I have included the ip address of the remote machine to the "machine name" input of the "New Report" vi.
Any suggestions/solutions?
Gerry Thompson

Hi Gerry,
One reason that you may get this error is if Distributed COM wasn't enabled on the remote machine. See this Microsoft KB for how to check or enable that functionality.
If that doesn't help; let me know, and I'll try to setup a similar test case on my end. The process isn't well documented, and I haven't seen any existing examples, so I'd like to see what it takes to get it running.
All the best,
Fred V -- Product Support Engineer -- LabVIEW R&D -- National Instruments

Help! Error in New Report.vi

Why do I get an Error -2147312566 when I run New Report.vi? I have the Microsoft Report Generation Toolkit 1.0.1 installed and am running LabVIEW 6.1. I don' tthink that New Report.vi is the only problem I'm having. None of the SubVI's seem like they are able to be called when I run any of the example VI's that come with the Toolkit!

Hello,
Look at the following link. Hopefully this will help.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000CDB00000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=-2147312566&USEARCHCONTEXT_QUESTION_S=0
JLV

Why does New Report.vi not always minimize the document?

I’m using Report Generation Toolkit for Microsoft Office to generate documents based on bookmarks in a template document. It works very well and I’m pleased with it. However, it usually (not always) opens up the template document and displays it while inserting the data in the various bookmarks. The process really slows down when this happens. The document is to automatically print to the default printer when the print button is clicked without opening up.
I’m using the New Report.vi with Window State set to Minimized, Report Type to Word and the template document’s path and file name sent to Template. All other settings are default.
After the bookmarks are inserted I use the Print Report, Dispose Report and Simple Error Handler vi’s. There are no errors displayed.
OS: XP-Pro
LV: v.7.1
Report Generation Toolkit: v.1.0.1
Word: Office 2003 (Office 2003 was installed before installing the Report Generation Toolkit.)
Thanks,

Attached is a sample of the printing vi along with a subvi for support. Also attached is a sample template. This vi is a much simplified version of what I'm using. However, it also opens up the Word template. It opens and closes very quickly, but it should not open at all. In my final program, it really chokes up when the template opens.
I hope you can find something about it.
It's not clear to me what is meant by "WindowState input of no change."
Thanks,
Dave J.
Attachments:
Print Test.zip ‏47 KB

Creating a new report in 11.5.9

I am trying to create a new report for Oracle Sales Online. I don't want to just do a simple JSP, I want to use some of the existing functionality that the existing pages are using.
Take the Organization Summary page for example. Its the page called asfOrgznSumryMain.jsp and its many included JSPs and java classes in the oracle.apps.asf.customer.organization package that it uses.
I have created java classes that mimick the classes used by that page, such as my own EO (Entity Object), VO (View Object), and TD (table rows) objects. I've made them select from tables that I want to show as best I can.
But all the calls in the JSPs using function values that resolve to JSP page filename values are just confusing. I am trying to create an advanced search page for my new summary where the user can save searches and pick columns like they can on other pages. How can this be done? Is there documentation anywhere? How do I create the functions needed to be able to have an advanced search page, save user queries, create a default query for the page for the first time a user views it, etc etc?
Someone please help. I need to do this in 11.5.9...we will be moving to .10 someday, but until then, I need to create this new report that uses Oracle's application framework as much as possible.

Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region
You would do all these steps for your advanced search page as well, so that in your main jsp, you can call asfPage.setAdvancedSearchPage() with the attribute name of your advanced page.
What I Still do not know is:
(1) My main page keeps coming up saying that there is no default query defined for it. How do you create a default query for a report?
(2) How to get the personalization to work.
Can anyone help?
Thanks!

How to create a new report using MS Word add-ins?

Hi, I am a newbie. I am using BI Publisher 10.1.3.4 and l want to create a simple report using BI Publisher from MS Word add-ins. I don't have a default template. What are the steps to create a new report from scratch. I want to create a simple report for one table contains 4 columns & 2 rows data, and then save the report under my folder.
I am in an urgent need to learn this, any suggestions are highly appreciated.
Thanks all.

Thx Everyone, I figured that out. It's simple and clear to me.

Error in running new report

Dear SAPIENTS,
A new report is created and getting error given below.
The (internal) unit HR has not been maintained in the unit table
    Message no. BM312
Diagnosis
    No unit is maintained with the key HR.
Procedure
    Please maintain the appropriate unit with the Measurement unit
    maintenance transaction.
Can anyone suggest possible solution for it?
Regards,

Hi,
Please check in t-code CUNI whether your unit of measure is there or not.
Kapil
Edited by: Kapildev Farakte on Jan 15, 2010 12:36 PM

Error when creating a new Reports Server instance

Hi,
I have tried to create and start a new reports server instance using the following method:
1- Creating the report server instance:
rwserver server=%newrepserver% start
2- Stopping the OPMN:
*%ORACLEHOME%\opmn\bin\opmnctl stopall*
3- Adding a new server target to OPMN.XML
*%ORACLEHOME%\bin\addNewServerTarget.bat %newrepserver%*
4- Updating the configuration with new OPMN settings:
*%ORACLEHOME%\dcm\bin\dcmctl.bat updateconfig -ct opmn -v -d*
*%ORACLEHOME%\dcm\bin\dcmctl.bat resyncinstance -v -d*
5- Starting the OPMN again:
*%ORACLEHOME%\opmn\bin\opmnctl startall*
However, when I try to start the OPMN again, I receive the following error:
opmn id="##########:6200 5 of 6 processes started
ias-instance id=red.########.########.lan
++++++++++++++++++++++++++++++++++
ias-component/process-type-process-set:
*%newrepserver%/ReportsServer/%newrepserver%*
Error --> Process (pid=6888) failed to start a managed process after the maximum retry limit.
Log: %ORACLEHOME%\opmn\logs\%newrepserver%~ReportsServer~%newrepserver%
Any ideas as to why the reports server instance cannot be started?
I have tried rebooting the server many times and have recreated other reports server instances but with no luck.
Many thanks in advance,
Chris

On Windows this is caused most often by the temporary directory setting.
Change the temporary directory to some fixed directory writable by anybody, e.g. "C:\temp".
Change this in:
Registry entry: hkey_local_machine\software\oracle\key_<oashome>\REPORTS_TMP
<oashome>\opmn\conf\opmn.xml: search for environment variable TEMP (under ias-instance)
Good luck!

An error occured while generating a new report template

I have installed the Crystal Reports 2008 V2 and also the support pack. Installed the SAP Integration Kit XI 3.1 and the latest service pack 2.7. When I try to use the SAP Tool bar from Crystal Report , I can connect/see the queries but when I select any query to create a report I am getting an error message
"An error occured while generating a new report template". Any advise ? How do I turn on the trace in the client ?
Thanks,

Hi,
Did you update your Fix Pack...
Here is solution for Client...
To turn tracing on for client applications, you can use the following steps:
1. Click Start > Settings > Control Panel > System > Advanced > Environment Variables button.
2. Under the User Variables, add the following variable and value:
For Enterprise XI:
Variable Name: BOE_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logs
For Crystal Analysis, Crystal Enterprise, and Crystal Reports version 10 and earlier:
Variable Name: CRYSTAL_LOGGER_ENVIRONMENT
Variable Value: -trace -loggingPath c:\logging
Regards,
Bashir Awan

New Report

Similar Messages

Maybe you are looking for