New role with workbooks not visible

Dear all,
I have something strange. I created a role and I saved workbooks in it.
When I create a new workbook and save, I can see this role and I can save the workbook in my role (this role is assigned to me).
However, when I reopen the workbook, I go to the Role tab but I have nothing: no role and thus no workbook.
Do you have any idea?
Regards
Eric

Hi Ric,
I know that behavior from my own experience. Up to now I just came up with a workaround solution. When you want to open the saved workbook, you can go to "Search" tab where you can search for the workbook description. This search seems to be case sensitive, so be careful with that.
If someone else found another solution I am interested in that, too.
Best regards
Volker

Similar Messages

  • In IC_Auto business role Toolbar buttons not visible

    Hi,
       In my project for IC_Auto role the buttons in the toolbar is not visible. we have not modified any thing to standard. Any notes to be updated ?
    With regards,
    selvam

    Hi,
    I am not sure if this appies here. You might check
    SPRO->CRM->crm cross-application components->
      Generic interaction Layer/Object Layer ->
         component-specific settings->
           define simple objects
    For these objects 2 rules apply:
    1. 'search object name' can only be used once.
    2. 'search object name' should not have the same name as any 'object
    name'.
    Do you have any entries, which break these rules?
    If it is related to component enhancement, note 1122248 might help.
    Best Regards,
    Sigrid

  • CRM 2007 New Service Ticket Transaction not visible in WEB UI

    Hi Gurus
    I don't understand why this is so difficult.
    To me I have done everything correctly.
    I have a Service Ticket Transaction visible in the WEB IC.
    I now want to make it visible for use in the WEB UI, I have set the channel to WEB UI.
    Yet when I try to create a new Service Ticket from the Service Professional Role under Service Order the Transaction is not visible. Yet I can can search for the Transactions created in the WEB IC from the WEB UI without an issue.
    Maximum Points for the right answer.
    Regards
    Panduranga

    Solved
    I needed to add the Service Ticket Object Create option into the Navigation Bar Generic OP Mapping Option.
    After that the Transaction Type was visible.

  • Role Approval request not visible in Role Approvers ToDo tab

    Hi IDM Experts,
    We have implemented IDM 7.2 SP8 in our project. We have performed the basic configuration for Identity center and IDM UI. The initial load from CRM is also completed successfully.
    We followed the steps in guide https://scn.sap.com/docs/DOC-26322 to configure workflow such that in case role is requested to be assigned to user, the request goes to role approver(in his todo tab) for approval. The access will then be provisioned into backend CRM system on successfully
    approval. However, we are facing an issue where the Role approver does not get anything in "TODO" tab for approval. The request shows in "Pending" status and logs show that tthe request is pending approval, however, it never appears in role approvers queue.
    Kindly help on the issue. Please provide below information:
    1) We can check in logs that the request is pending approval. Is there any way we can check where is the request routed to and whoose approval is pending here if it did not goto "Role Approver" for approval.
    2) Any trouble shooting mechanism/tool available in IDM to debug issues like this.
    Thanks in advance for your help.
    Thanks and regards,
    Nitin

    Hi Nitin,
    How do you assign the role to the user? if it's trought IDM UI, you loggin with which user?
    There is a limitation on approval with SP08 : the requestor of the assignement can not be define as an approver.... but in this case the approval is automaticaly rejected by the system ...
    in which logs / table can you see that your request is "pending for approval" ?
    I also would recomand you to use the simple scenario "get approver from role/privs" of as krishna mentioned. (unless you need to do more custum actions)
    Besides, you can check approval entries and status in DB views :MXWV_ApprovalQueue ...
    Fadoua

  • Messages arrive with body not visible

    I am starting to see a number of mail messages arriving in my Inbox which I cannot read because the content is not visible. The message size in the Message viewer suggests that there is content (15kB, for example) but no amount of manipulation -- e.g., selecting the whole message and trying to force the text color to black -- seems to work.
    If I click "reply" then in the composition window which appears the message is visible.
    When this first started happening I thought there was something funny about the sender's software, but these invisible messages are coming from a variety of sources.
    This has just started happening in the last week or so.
    Is anyone else seeing this?

    I quit Mail and restarted it -- the invisible messages are now visible.
    It is still a mystery since this problem has spanned several launches of the Mail app.

  • Files moved to new MAC but many not visible in library

    I recently moved my iTunes folder from an older Mac (iTunes 6.0.3) into the new Mac with iTunes 8.0.2. All folders and files transferred, but only about half are showing up in the library. There also missing playlists, although many did appear. In case it is relative, very few of my songs were purchased at the iTunes store. Any thoughts on how to make the missing files and playlists active?

    If the files have just been placed in the iTunes folder & never opened/played, it's likely that iTunes hasn't "seen" them yet & this is probably why they aren't appearing in your library.

  • New GT70 - GTX 680M not visible?

    I just got my GT70 out of the box. It has the GTX680M. When I run dxdiag as well as Window Performance it doesnt show up. This seems concerning that a brand new laptop isnt setup correctly. I saw on the boards there may be some issues with the latest nVidia drivers and Windows 8?Any ideas on how to remedy this? I am not sure simply installing drivers new drivers will cause it to show up as it already has drivers installed and the system should recognize this. Any guidance is appreciated before I jump to conclusions about a more severe issue.
    Thanks,

    Quote from: Nomas on 06-January-13, 10:53:46
    I just got my GT70 out of the box. It has the GTX680M. When I run dxdiag as well as Window Performance it doesnt show up. This seems concerning that a brand new laptop isnt setup correctly. I saw on the boards there may be some issues with the latest nVidia drivers and Windows 8?Any ideas on how to remedy this? I am not sure simply installing drivers new drivers will cause it to show up as it already has drivers installed and the system should recognize this. Any guidance is appreciated before I jump to conclusions about a more severe issue.
    Thanks,
    that gaming Graphics means its the 680m score. if you really concerned about seeing your gtx on screen check system information from control panel administrative tools. Dxdiag is just basic does not show everything. And scoring 7.1 in windows index with igp is not possible so your gaming graphic card is fine and running. There is nothing wrong with your nb. 

  • EVENTS WITH SCRIPTS not visible

    Hi,
    I am not able to see the events with scripts in the SHOW drop down.
    How can I get the above to have the calculations done?
    the version of the designer is 8.0
    Regards

    Hi,
    When it displays in the “default Calendar view” ,it shows "Event Permissions" option under EVENTS ribbon, this option can set permissions for a single
    event. Click
    ” List Settings “
    option under CANLENDAR ribbon, the "Permissions for this list” option can set permissions for the entire calendar.
     When it displays in the "All Events" view, it shows "Shared With" option both 
    in the ITEMS and LIST ribbon. This option under the ITEMS can set permissions for a single event. This option under the LIST can set permissions for the entire calendar.
    Best regards,
    Wendy 
    Wendy Li
    TechNet Community Support

  • Subpanel with visa not visible in executable

    I wanted to attach two VIs but for some reason the "post" button on this forum doesn't work when you try to add an attachment and hoovers over the browse button. Anyway, the VIs would have been called Main and subpanelVi. 
    The Main.vi contains a subpanel and loads subpanelVi.vi in it with an invokeNode. subpanelVi.vi contains a "VISA Open" vi and a string control. When I open Main in the development environment I see the string control in the subpanel. When I create an executable of the Main.vi and run it I don't see the string control in the subpanel, I also can't stop the while loop of the Main.vi. The same happens when placing a "VISA Find Resource" vi in the subpanelVi.vi.
    I would like to use these VISA-VIs in a subVI who's FP I would like to be displayed in a subpanel. Why does this go wrong and how to solve it?

    I checked the checkbox Window Appearance\Customize\Show Front Panel When Called but that didn't solve the problem.
    Ranjeet_Singh: If I only build an executable I don't see how to include VISA. Is it not only possible to include libraries in the Installer Builder?
    The FP only does not show when I place a "VISA find resource" or "VISA Open" on the blockdiagram of the subVI I want to put in a subpanel.
    I noticed that in the executable when I stop the while loop of my "main.vi" (the one that invokes the subVI), the main stopped because i can see the icon top-righ but apperently the "VISA Open" is still running. Only when I click the red abort button the main.vi  window closes and disappears.
    How to include VISA in the "build executable definition" and why does this problem not occur when placing a "VISA write" or "VISA read" on the blockdiagram for example?
    Many thanks so far. (I'll give kudos as much as I can to the one that can help me solve this problem. It's kind of urgent) 

  • Firefox synced new computer with old not the other way round, lost all tabs, etc on old computer

    Using Firefox sync...my new computer synced into my old, not the other way around. I lost all tabs, history, etc on old computer

    Bookmark Backups
    Type '''about:support'''<enter> in the address bar.
    Under the page logo on the left side you will see '''Application Basics.'''
    Under this find '''Profile Folder.''' To it’s right press the button
    '''Show Folder.''' This will open your file browser to the current
    Firefox profile. Now '''Close Firefox.'''
    Enter the '''bookmarkbackups''' folder. This is where Firefox makes backups
    of your bookmarks. Look for the '''jsonlz4''' file you want to restore
    (check the time / date / size). Right click on that file and select '''Copy.'''
    Now go back to the profile folder where you started. Rename the file
    '''places.sqlite''' by adding '''.old''' to it. Now right click in the folder
    and select '''Paste.''' The file you just pasted here, rename it to
    '''places.sqlite.''' After you are done, restart Firefox.

  • Trying to sync new account with facebook not working

    hi i have been trying to sync my spotify with facebook on my mobile but as i have already done this with previous account it wont let me and i cant seem to find any way to un sync old account any help plz thanks

    Sorry for the delay replying back.
    I suggest you contact support so they can help you
    https://www.spotify.com/about-us/contact/contact-spotify-support/
    If you get an automated reply email telling you to check the help section or the community, you need to reply back to it, even if it's from a no-reply address.
    Support usually replies within 24-48 hours.

  • New custom web form not visible in the menu.

    Hello WPC Experts,
      I created a new web form by following this pdf https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2041eb17-6001-2b10-b08d-b95ce55fa9b7
    After the "3.2.6 Referencing the XML File in the Document Type" step and restarting the server, I don't see the web form I just created.
    I have the wpc_editor_role assigned. Where should I be looking to access the new web form.

    Hi Anja,
    Thanks for your response. I was working on other issues. I confirmed that I enabled "Generate UI-command" for my new Web Resource Type.
    I deleted the xml/xsl files and recreated them by copying from the how to guide: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2041eb17-6001-2b10-b08d-b95ce55fa9b7
    After referencing the xml/xsl files and restarting the portal, where should I check for the new web form I just created ( this is section "4. Result" in the how to guide).
    Thanks
    Srinivas.

  • Built a new role with DISPLAY authorizations in MM

    Hi All,
    I have been given a task to create a role for MM (Materials Management) Display only.
    What i have done is from pfcg created a role and in the menu tab i selected copy menus from sap menu and now i have to maintain authorizations.
    when i go to authorizations tab and change role authorizations there are somany objects that need to be maintained for example Basis,controlling, FI,MM,PM,SD.
    can some one please tell me what need to be maintained and what tcodes need to be assigned to this role (for MM ).
    Many thanks for your time and help.
    Havent Been given any tcodes****
    Kind Regards,
    Vamsi.
    Edited by: vamsi koganti on Apr 8, 2008 5:53 AM

    Hi,
    depend on what t-codes you defined, the oject class and authorization objects maybe vary.
    there is no exact predefined template for your purpose, but common authorization class that relate to MM are :
    MM_B
    MM_D
    MM_E
    MM_G
    MM_L
    MM_R
    MM_S
    MM_W
    any other object class, in example SD for SD modules depend t-codes that you have assigned.
    if you don't understand what value to be set, ask your BASIS or other functional, if they don't understand too, try to inactivate it and try to login. if you are facing unauthorized one, try /nSU53 to determine what authorization is missing.
    rgds,
    alfonsus guritno

  • Very new, issue with applets not loading

    Hello, thanks in advance for any assistance provided.
    I am having trouble getting any applet that I create to run in my browser. I have tried using both Netbeans and Eclipse as the IDE. Most of my testing is in a .htm file on my desktop pointing to a .class file also on my desktop, but I have also tried hosting both of them on a webpage with the same results.
    The HTML I'm using is
    <HTML>
    <HEAD><TITLE>
    HTML Test Page
    </TITLE></HEAD>
    <BODY>
    Test
    <HR>
    <applet code="HelloWorld.class" width="420" height="210">
    </applet>
    </BODY>
    </HTML>The code in the .class file is from http://java.sun.com/docs/books/tutorial/deployment/applet/getStarted.html :
    import javax.swing.JApplet;
    import java.awt.Graphics;
    public class HelloWorld extends JApplet {
        public void paint(Graphics g) {
         g.drawRect(0, 0,
                 getSize().width - 1,
                 getSize().height - 1);
            g.drawString("Hello world!", 5, 15);
        }The error message I get in my browser is
    java.lang.ClassCastException: HelloWorld cannot be cast to java.applet.Applet
         at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Exception: java.lang.ClassCastException: HelloWorld cannot be cast to java.applet.Applet
    Can anyone explain what I'm doing wrong in terms a java noob could understand? Thanks alot.

    Even though I tried that multiple times before, it seems to be working now. I think my issue must lie with me being confused by what I'm supposed to name the package and the main class and all that. Thanks Paul.

  • New clusternode in iManager not visible

    Hi guys,
    I am currently migrating our NetWare 6.5 cluster to OES2.
    I added my first OES2 node to the cluster, everything went fine.
    Only the cluster node doesn't show up in iManager, it does in ConsoleOne.
    Running the "cluster view" and "cluster info all" it all looks fine.
    Am I missing something, can it be fixed without restarting the cluster?
    Thanks,
    Hein

    Normally the iManager stuff uses cimom to talk to the cluster, and in a mixed node (or if using iMan on OES2 Linux against a NW cluster) you have to make sure that:
    a) the master cluster node has a replica of the partition holding the cluster object
    and
    b) that cimomd.nlm is running on all your NW nodes
    Otherwise it can take a really long time for things to show up (in my case, I have 16 nodes and it took maybe 2-3 minutes after the server was rebooted before it showed up in the cluster view)
    And that's WITH a R/W replica on the Master node.

Maybe you are looking for