New router and can not connect wirelessly

Installed a new router that changed my security from a WEP to a WPA2. I have connected to the printer(7410) through ethernet cable and changed the security settings but the printer will not connect to my router. I am currently printing by ethernet cable hooked directly into the router. When i try to use the printer interface to cinnect to router the only option that comes up is WEP. 
Any ideas?
This question was solved.
View Solution.

The printer will support WPA, but not WPA2.  It may have previously been connected to WEP and is expecting that.  Let's reset it:
From the front of hte printer: Setup > Network > Restore Network Defaults.  Now try the Wireless Setup Wizard from that same Network menu.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • I have an Airport Extreme wireless router & I can not connect my Kindle.

    I have an Airport Extreme wireless router & I can not connect my Kindle.  Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet.  It says the password is incorrect.  I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly.  I see no tab to create a guest network.  I do not mind giving my password to visitors, but that does not work.

    If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
    As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

  • I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

    I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

    Wmorlac wrote:
    I have the new IPad and can't connect via bluetooth to any of my apple devices...
    Correct... See Supported Bluetooth Profiles Here...
      http://support.apple.com/kb/HT3647
    Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

  • Forgot password on my apple I phone and just got a new one and can not remeber my verizon email password, how do I retrieve it

    forgot password on my apple I phone and just got a new one and can not remeber my verizon email password, how do I retrieve it

        hibob99,
    Thank you so much for reaching out to us. I know there are to many passwords out there now days to keep track of them all. Are you looking to reset the Verizon.net e-mail address? If so, you would need to reach out to Verizon Communication by calling 800-837-4966. Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • I buy new computers and can not authorize my new computers

    Hello
         i buy I buy new computers and can not authorize my new computers it show "can not authorize for 1 year" how can i do
    i sell my old computers (2 PCs and 1 laptop) but i can not use my new computers for sync with your product all of my family use your product
    but can not sync anything
    please find way for me

    Did you deauthorize your previous computers before selling them?
    You may find some useful information here.

  • I want to update my credit card info.  I have moved to a new country and can not process the payment.  PLEASE HELP

    i want to update my credit card info.  I have moved to a new country and can not process the payment.  PLEASE HELP

    The same Adobe ID can not be used to make payment if you have changed country. To get complete resolution, please contact Adobe support Contact Customer Care.
    Regards
    Rajshree

  • Self assigned ip and can't connect wirelessly on any apple device

    Man oh man... this issue has been festering for almost an entire year now and I have not found a solution. Last August (2009) my macbook stopped wirelessly connecting to my ATT 2WIRE dsl modem saying it had a self assigned ip address. I bought the computer in July and could connect with no issues for about a month. Ever since then, I've been connected via ethernet with slow connection. At the same time, the 2 iPhones in our household also could not connect wirelessly. One G5 could connect wirelessly but was extremely weak and often dropped the signal.
    I did tons of research and found zillions of other people with this issue and no resolution. I've tried every solution on macrumors, and apple discussions with no results... I've disabled firewall, renewed DHCP, tried DHCP manual (which then changes the status to say I'm connected, but nothing works in my browser), restarted, etc. At work, I can connect to our Linksys router wirelessly with no issues. When my friends come over, their macbooks and iPhones don't work either!
    Originally I thought the issue was my modem so I ordered another one. Same issue. Just this week I was at my wits end and cancelled my service with ATT and switched to Clear. I acquired a Linksys router to connect to the Clear Modem and I'm STILL having this issue. The difference is now that my iPhone can connect wirelessly but my macbook still cannot. The router is a Linksys WRT51ab. My macbook pro is on version 10.5.8. I can only assume that some kind of update to airport is causing the problem. As of now, my IPv4 address is: 169.254.111.225
    Please someone help me! I promise some kind of reward if you can help me fix this.

    Based on the model number, your Linksys router is OLD.
    I'd actually suspect that your router has been the problem.
    You can download the full user manual here --> http://homedownloads.cisco.com/downloads/wrt51ab_ug.pdf
    I don't know if you ever secured your wireless router or renamed it from the factory defaults.
    If it your Linksys wireless router is not password secured, it's possible that someone else changed settings about the time things stopped connecting.
    Regardless, you can completely reset the Linksys to the factory defaults by holding down the Reset button on the Linksys for more than 10 seconds.
    Do that first.
    Then see if things 'magically' start connecting again. I'm guessing the phones will connect, but the Mac still won't, because of the IP address in the current configuration.
    If not, here's how to configure your Mac network settings.
    On your Mac, in System Preferences, Internet and Network, Network,
    Click on Location, Edit Location
    Click the + sign to create a new location called '_test'
    (The underscore before the name will put it at the top of your Locations list where it's easy to find)
    Select Ethernet (wired)
    First, we'll let DHCP try to set the address.
    Click Apply.
    Move the selection back to Ethernet, and watch the Status.
    If it shows Connected and IP address appears after a few moments, at least the WIRED configuration is working.
    Now IF the Wired configuration works, lets move on to the wireless configuration...
    (If the Wired configuration is still not working, post back and we'll work through it.)
    Still in System Preferences, Internet and Network, Network, with the _test location you just created...
    Select the AirPort interface in the left column.
    Turn AirPort On.
    If no Network Name appears, click on the up/down button and select Join Other Network and select your Linksys router name.
    Click 'Apply'.
    Leave DHCP settings alone and watch the Status to see if it connects.
    Let me know what happens!

  • Just got a new computer and can not find out were to authorize my new computer can you help

    just got the lasted update of itunes and can not find were to authorze my new compter

    If it's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If it's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (81400)

  • I am trying to authorize a new ipad and can not find authorize in store

    I am trying to authorize another device and can not find authorize this computer under Itunes store.  Where do I authorize my computer?

    breory wrote:
    I am trying to authorize another device...
    Authorisation only applies to Computers... Not iDevices.
    See Here for full details...
    About authorization and deauthorization
    To Associate an iDevice with your Apple ID... See here...
    http://support.apple.com/kb/HT4627

  • New house, new ISP and mac not connecting to Internet

    Ok i give up!
    Just moved to a new apartment, and have cable internet access instead of DSL for the first time.
    So i have a wirless router from Cablecom, with 4 ethernet ports, but the wireless signal is a bit low so have also connected my Netgear wndr4500 to one of the ports and My PC, ipad and iphone all connect to the Netgear wifi and out to the internet no problems.
    The imac running 10.8 connects internally but not to the internet.
    I can connect to cablecom router from the mac and access the settings so i know the wireless network is ok on the mac but that seems to be as far as it gets.
    I have tried connecting direct via cablecom router wifi, and via ethernet cable to the router and same symptoms.
    Have deleted the network and remade it from scratch.
    Still same, when i go to google.com ( for example ) it simple says not connected to the internet.
    However if i use network utilities on the mac, and ping 173.194.33.50 it returns with all 10 and no packet loss
    I put that address in a browser and i get google.com, but can't get past it
    So now i'm stumped!
    Any suggestions????.
    Thanks
    David

    Launch the Network Utility application.
    Step 1
    Select the Lookup tab and enter
    google.com
    in the address field. Press return. Post the output – the text, please, not a screenshot.
    Step 2
    Select the Ping tab and do the same.

  • Can not connect wireless through Bootcamp Windows XP to Timecapsule?

    Any help would be appreciated.
    I recently purchased an iMac with Leopard (10.5.2). Today, I used Bootcamp to install Windows XP with SP2. I created a FAT partition of 32 gigs and followed all of the steps (including installing drivers off of MAC OS installation disk 1 while on initial XP boot up).
    My wireless network is on a Timecapsule and is "WPA Personal secured". The Mac OS detects the network and connects instantly, my work laptop PC detects the network and connects instantly. However, the newly installed XP detects the wireless network but will not connect. When I try to connect to the network, I receive an error message that basically states "unable to connect...". I do not even get to a screen that asks for me to enter a network key or password. When I try to connect to two other networks in the neighborhood, I at least get the network key screen.
    I have gone into the Windows network tools and have tried to manually configure the connection, but I still get the same problem. I thought maybe I had "WPA2 Personal" enabled as the security setting for the network (XP does not support WPA2 out of the box) , but I have it as "WPA Personal".
    Can't figure it out. I am new to Macs (about 1 month). The reason I switched was because I could run both Leopard and XP.
    Best regards,

    Solved my own problem.
    FYI
    Even though my security settings on my Timecapsule are listed as "WPA Personal", my work PC Laptop kept detecting as "WPA2 Personal". I even removed all security settings from the Timecapsule and my laptop still detected as "WPA2".
    I know that XP does not support WPA2 out of the box.
    I hooked directly into the Timecapsule via an ethernet cable while in Windows environment. Thankfully, I was able to access the internet. I went to Microsoft and did a search for WPA2 patches for XP. Found one that allows XP wireless connection to WPA2. I installed the patch and was able to detect and connect wirelessly to Timecapsule from XP.
    After two days, I have come to the firm believe (don't know the technical reasons why) that Timecapsule is a WPA2 device and that the XP patch is the only way to create initial connectivity. It is sort of ironic that although I wanted to connect wirelessly, I had to first connect via an ethernet hard connection.
    Solve one problem, left with another. I have a Epson all-in-one scanner, printer, copier hooked to the Timecapsule. My iMac picks it up fine wirelessly but I am getting nothing on XP. Hopefully it is a simple driver download issue.

  • New iphone 5s will not connect wireless to itunes

    I recently upgraded from 4s to 5s on 2 units.  The 4s would sync wireless to airport but both new 5s will not.  Neither my phone or my wife's phones will connect wireless but will when connected.  I have checked 'Sync with this iPhone over Wi-Fi'  under Summary when connected by cable and other system settings on the phones seem to be in order.  I have searched Apple site and believe all necessary steps have been taken.

    I thought I should say something since I had the same problem with iTunes 11.1.3 connecting my iOS devices. iPhone 4, 5, iPad 4th gen, all on latest iOS7. My setup is on macpro 3.1. I tried updating OS, from  OSX Lion, ML and Mavericks. Obviously, updating OS did not solve the issue. iTunes was the latest and greatest at 11.1.3 on all of them. I also had the annoying TRUST message pop up constantly, while it could connect to iPhoto, but no iTunes, for backup and syncing.
    Long story short, found out on various forums people were having success syncing their iOS devices again on previous versions of iTunes. In my case, 11.1. Going back to 10.7, it will not support iOS 7. For this, you need to delete iTunes 11.1.3.
    I found this helpful, but beware it involves Terminal.
    http://osxdaily.com/2012/02/06/delete-itunes-mac-os-x/
    Then, through good ol' google, I could fine a previous version of iTunes 11.1.
    Installed it, connected my iPhone 5, and voilà, iPhone detected as before, and ready to backup and sync.
    Spent many days researching this, it may not resolve the issue for everyone, but I hope it can help some folks running into a similar issue.

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • Got new router but can't connect to printer on ipad or mac

    can't find air printer on ipad or mac since we got new router but were connected to router and wiifi on

    Have you tried connecting to wifi, if you cant get those apps or facebook than most likely you are not connected to wifi. Please turn on your wifi connection button in your settings. Look for the a certain wifi and type in pass code and hopefully you should have those apps.

  • New ipad and Macair not connecting to internet

    i just got an ipad and macair. when setting up the wi-fi, it looks as if its connected with all the bars showing. but when i click safari, it says not connected to the internet. i have done everything on the wi-fi help page. and reset the network about 50 times. but always the same result. i really havent tried the macair yet. any suggestions to get it to connect to the internet?

    WPA2/personal - I do have the greed LED light and I can acess the internet on my iMac via the LAN port. I powered off the comcast modem and the Extreme and the iphone and the iPad and then started up the Extreme and then the modem and then the others.  No joy.  on both iPhone and iPad I get 'this webpage is not available' when I try to connect via the wireless network. 
    I keep thinking this is something simple I'm overlooking as I had no problem until I replaced the Extreme.  I did not set up a new wireless network.  Could that somehow be a cause..?

Maybe you are looking for