New router and problems with IChat

After years of messing with an airport and airport express (and multiple problems) I purchased a NetGear wireless router for my house. It works great, and the signal is much stronger than before, but my IChat does not work. I click it on and it immediately shuts off, opening with a box "IChat Connection Alert. Lost connection with AIM. The connection to the host was unexpectedly lost."
It shows up on my IMac as well as my IBook.
Thanks, NiaWarrior

Hi- I was having the same problem; everytime I would try to connect to IChat, it would disconnect and say IChat connection alert. I switched my port to 443 and that worked. Thanks for the tip!
Is it ok to keep using that port, no matter what type of internet I am connecting to?

Similar Messages

New iMac and problem with imovie 11

Hi,
I purchased my new iMac two days ago mainly to use iMovie.
But after editing projects for around 30mins it seems to freeze and requires a force quit. When I restart I can't edit or playback the project, almost as though it is locked.
I've tried deleting preferences for imovie and repairing through utilities. I've also tried deleting the projects and starting new ones but the same problem happens after about 30mins of editing.
Installed latest updates for OS X 10.7.1, and using imac with imovie 11
Could anyone help me with this?
I'm a brand new mac user and to encounter this problem after just one hour of use is quite frustrating.
Ps. I'm not sure if its related but in Finder on the left when all the places are listed, I don't see my username... not sure if it should be there?

Having spent more time in Apple Communities I am delighted to say I have sorted the problem:
Entered:
username : guest
password : guest
and I am now printing!
Happy days!

New iPod and Problems with Podcasts

I just got a new 30gb iPod yesterday. I noticed when I was playing my podcasts this afternoon, that I couldn't play them all at once. They would play one at a time and then I would have to go back and chose from the podcast category. I have had a 15GB iPod and this did not happen.
Anybody else have this problem?
Thanks!
HP Windows XP

2. To make the iPod play only one Podcast (and then stop) you need to put the iPod into shuffle songs mode. What happens (then) is: because Podcasts are set to skip on shuffle, when they are imported to iTunes, there will be no other Podcasts playable because they are all set to skip.
That was the easy one.
1. Are you changing the start and stop times of an episode in iTunes? Is it these new times that do not transfer to your iPod?
If I assume (for now) that you are changing these times in iTunes, don't forget that you need to do this before you sync the iPod to iTunes. If you already have the iPod connected, iTunes may activate the transfer of those Podcasts before you chnage the time settings.

I set up a new router and the windows machines have no problem with connectivity. I go through the MacBook Pro's airport assistant and view my network and then enter the WPA2 password. I get back a message saying the password is incorrect when it is

I set up a new router and the windows machines connect fine. My MacBook Pro does not. I go through the airport assistant and see the network yet when I enter the router WPA password I get a message back saying that the password is incorrect. And, it isn't! Very frustrating. What can I do as I had the same problem after I tried to reinstall my last router. Again, only on the Mac. Thanks!

If you kept the same Base Station name and network name, that can confuse Keychain Access. Either change the Base Station and network name, or open Keychain Access Utility and delete any reference to your Base Station and network name. Make sure you delete from the Login and System keychains.

Need suggestions for new router running mac with eyeconnect,and ps3

We have the latest version of leopard on our 24" imac and we have eyeconnect ver. 1.6 we need to buy a new router and i want one that is very easy(like plug it in and walk away)to use. The main priority for this is not having problems streaming media to our ps3 via eyeconnect or medialink. Wireless or wired whatever would be the best i have never actually had an airport only linksys and have been unhappy with most of them any advice welcome about the router or getting eyeconnect to be recognized by the ps3 once its hooked up. Thank you

What I have in my house is an Airport Extreme with it's two (n,b or g) wireless connections for older non-N wireless connections. I then got a D-Link DGS-2208 10/100/1000Mbps 8-Port Desktop Green Ethernet Switch 8 for fast subnet sharing in the house. This speed is important for HD video sharing for from the external I have connected to the USB2 port on My Extreme.
Note: My Extreme is in "Bridged mode" because it sits behind a wired router that acts as the DHCP server.
Getting a router with Gig Ports and and USB2 port for an external to store/share files (videos mainly) to all my networked devices. The USB2 port on the Extreme was the deciding factor for the extra cost and this handy port making any USB2 external into a networked drive. Plus my older iPhone 3GS only does G it was a no-brainier because of the dual wireless.
The GIG switch is future proofing yourself for the years to come.
Plus I called the extreme but it is a Time Capsule that is just and extreme with a built-in disk.
One more thing: Use CAT6 cables in your network.
Message was edited by: satcomer

New problem with iChat

Good morn
I still haven resoved my previous post about connection problems with iChat, but hope to do that when I visit my dad next month. Thanks for all the advice anyway.
A new problem has emerged, and seemed to coincide with the install of Tiger 10.3 last week. Now when I try to connect to various tests sites, I get an "insufficient bandwidth" error.
Is this likely to be a problem with Tiger, as I have not changed my isp, settings or broadband type?
Or could it just be the exess load on the system over the Christmas period with all those naughty teenage boys downloading **** and playing games during the school hols?
Any suggestions and/or fixes greatfully accepted.
Thanks
Tim R

Hi,
Glad to hear you are up and running.
New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...
Ralph

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

How do I Get My Router to Work With iChat ? FAQ 2

Replaces iCh: FAQ 2 How to get my router to work with iChat?
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have.
Routers seem to fall into two categories
Those that work straight from the box. See Apple Doc 93333
NOTE
This Doc has not been updated since Jan 04
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255).
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
DMZ Demilitarised Zone
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN)
NAT Sometimes called NAPT and related to Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You will need to set an incoming IP address (Usually 0.0.0.0 for any outside server), a port that data will arrive on, the Inside computers IP address (your computer) and the port it will deal with the data on and the protocol it will use.
iChat uses TCP and UDP so some devices will need the settings done twice, once for each protocol.
See Apple Doc 93208 for more information.
Note:
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678. When you click on the invite window the process moves to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP
Wireless
Here you will have to read around but this Apple Doc 58514 might be a good starting place.
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my pesonal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding.
Ralph
G4 Dual 1Ghz MDD with extra HDs X3. Mac OS X (10.4.3) Have you read the iChat FAQs ?? They have moved to Users Tips

Replaces iCh: FAQ 2 How to get my router to work with iChat?
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have.
Routers seem to fall into two categories
Those that work straight from the box. See Apple Doc 93333
NOTE :This Doc has not been updated since Jan 04
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
DMZ Demilitarised Zone
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN)
NAT Sometimes called NAPT and related to Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You will need to set an incoming IP address (Usually 0.0.0.0 for any outside server), a port that data will arrive on, the Inside computers IP address (your computer) and the port it will deal with the data on and the protocol it will use.
iChat uses TCP and UDP so some devices will need the settings done twice, once for each protocol.
See Apple Doc 93208 for more information.
Note:
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678. When you click on the invite window the process moves to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP
Wireless
Here you will have to read around but this Apple Doc 58514 might be a good starting place.
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my pesonal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding.
With thanks to Macmuse.
Ralph
G4 Dual 1Ghz MDD with extra HDs X3. Mac OS X (10.4.3) Have you read the iChat FAQs ?? They have moved to Users Tips<</a>/span>

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

Problems with iChat 4.0.2 / Leopard / BT HomeHub

I have a .Mac account and iChat 4 on a iMac running Leopard 10.5.2 and using A BT Home Hub for my internet connection. I am able to have a video chat with my wife who has a Powerbook / Leopard / iChat 4 set up in our house, both using the BT Home Hub. But when I try to set up a video chat with my friend in Copenhagen who has a .Mac account and a Powerbook running Leopard it won't let us connect. It will let us have a text only chat.
I have read various posts on this subject and changed the firewall to let iChat in, changed the Quicktime streaming to 1.5 Mbps and changed the port in iChat server settings to 443.
Has anyone else any ideas, I am thinking maybe the Home Hub is the problem as i can connect to my wife's Powerbook on our home network.

I too am having problems with iChat 4.02 on an iMac running Leopard 10.5.2 as are numerous people having different hardware/software configurations. I've tried some of the suggestions like changing the server settings to 443, and changing the firewall to let iChat in. I believe somewhere, somehow Apple or AOL have changed something that may be causing these problems. I'm not technical enough to go changing a bunch of things and hope it works.
iChat was working for me about a week or so ago using AIM. I could video chat with a MacBook running 10.5.2, a MacBook Pro running Tiger and a Dell PC. Last night when I tried using AIM and iChat i could only text. However, I could video chat using our dotmac accounts and server settings 5190. But for some reason you aren't able to do that.
At first I thought it was because I stumbled into using CUPS to get my Xerox color laser printer finally working (after getting the new iMac) by changing localhost:631 to find my printer at port 9100 (whatever all of this means). But deleting the printer didn't restore iChat.
Someone on this forum suggested that installing Safari 3.1.1 may have somehow caused the problem. Maybe they are on to something!
My most recent software updates are:
2008-04-08 15:27:20 -0400: Installed "AirPort Utility" (5.3.1)
2008-04-08 15:27:24 -0400: Installed "Digital Camera RAW Compatibility Update" (2.0)
2008-04-08 15:27:48 -0400: Installed "QuickTime" (7.4.5)
2008-04-08 15:28:32 -0400: Installed "iTunes" (7.6.2)
2008-04-08 15:30:25 -0400: Installed "GarageBand ’08 Instruments and Apple Loops" (1.0)
2008-04-08 15:30:40 -0400: Installed "Time Machine and AirPort Updates" (1.0)
2008-04-08 15:30:45 -0400: Installed "Keynote Update" (4.0.3)
2008-04-08 15:30:54 -0400: Installed "Front Row Update" (2.1.3)
2008-04-08 15:31:30 -0400: Installed "Security Update 2008-002" (1.1)
2008-04-08 15:31:47 -0400: Installed "Safari" (3.1)
2008-04-16 17:47:07 -0400: Installed "iMac EFI Firmware Update" (1.3)
2008-04-16 17:47:09 -0400: Installed "Aluminum Keyboard Firmware Update" (1.0)
2008-04-16 17:47:26 -0400: Installed "Safari" (3.1.1)
2008-04-23 19:31:31 -0400: Installed "iMac EFI Firmware Update" (1.3)
At the moment I need my printer working, more than I need iChat. But I do hope someone figures out why this isn't working!

Problem with iChat changing my custom away message after 30 minutes

Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list change their away message, it doesn't show up on iChat unless I go offline and then sign back on. Any idea why it's doing that, and what I can do to get it to stop?
Thanks.
- Danielle
G3 iMac Mac OS X (10.3.9)

Hi ienjoyanime,
Go to the General Section of iChat Preferences.
Does it say you are set to Go to Away when you log off/QUit iChat ?
is the computer going to Sleep at this point ?
10:59 PM Saturday; April 1, 2006

How do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance

Does the new AIM Triton work with Ichat?

Hi,
Does anyone know if the new AIM Triton works with Ichat AV? I know the Beta version was not working but don't know about the new triton release.
Also, has anyone tried video/audio communication between Trillian and Ichat? Does it work? Is it better than AIM?
Thanks,
Stefano

I have been working with the Triton on a PC and after much research (frustration), I have found this stated on the AIM support site:
http://www.aim.com/helpfaq/startingout/getstarted.adp?aolp=#six
Q: Is AIM Triton compatible with AIM 5.9, AOL 9.0 and iChat?
A: : AIM Triton works seamlessly with AIM 5.9, AOL 9.0 and iChat. You can send and receive instant messages with your buddies using any of these clients. Certain features may not work across all clients at this time. Voice Chat with more than two people only works with other Triton users. Video Chat will work only between two Triton users at this time.
So after reading around, I believe the 5.9 will video to the iChat 3's but I haven't had the time to try. Other posts suggest this to be true. Including many by Ralph.

Just got a new router and now my ipad 1 says it can not connect to the server, even though it says that it is connected to wi fi

Just put in a new router and now my ipad 1 will not connect to the server. It is connected to the wifi though. Does this mean my ipad is too old? Any suggestions on what to do?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb. Can I use my original discs to restore these options to my new computer? Problems with this?

I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb. Can I use my original discs to restore these options to my new computer? Problems with this?

You might be able to depending on the age of the disc and the model of your newer used iMac. Only way to tell is to pop in the DVD and see if you can install the iLife programs.

New router and problems with IChat

Similar Messages

Maybe you are looking for