New router, printer does not work

A new wireless internet router and modem was installed yesterday. My printer does not respond from my MacBook Pro or my iPad. I followed all troubleshooting advice on HP and Apple websites. No luck. Apple support today suggested that my printer may need additional informatin which I cannot change. The Network ConfigurationCheck was perfect except for address changes and one other which may be significant. URLs for embedded web servers changed from http:/HP618550 to http://dhcppc2.
The Wireless Network Test Results were perfect.  My computers acess the internet also without problems. Apple had me put a USB cable between the MacBook and the printer.  Then the printer worked just fine. He thought (not being a printer guru) that perhaps the communication between the router and printer was the problem. Hence I come to this site.  I have followed all HP site troubleshooting advice and met each criteria.  HELP?

After reading this through again, I am wondering if the router is unable to support Bonjour properly.   Bonjour is the discovery service through which your Mac finds your printer on your network.
Although not for your identical router, this article may be helpful: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02986958&cc=us&dlc=en&lc=en#N135
If we can't get this resolved a for-sure, kill-it-dead solution is to get a normal, standard router (Linksys or Netgear) and put it in line with your ZyXel, disabling its wireless.  I can help if you want to go this way.  A good standard router would be $40 and you would be done.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

    You need to reinstall the printer driver, and set up the printer on the new hard drive.
    The Canon site should have the driver. Download it and install.
    Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

  • My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

    My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
    I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

    Reset Firefox to its default state
    If you're having major problems which you can't resolve, start fresh with only your essential information.
    Troubleshooting Information
    This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
    Application Basics
    Name Firefox
    Version 33.0.1
    Update History
    User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
    Profile Folder
    Enabled Plugins about:plugins
    Build Configuration about:buildconfig
    Memory Use about:memory
    Multiprocess Windows 0/1
    Crash Reports for the Last 3 Days
    Report ID Submitted
    All Crash Reports
    Extensions
    Name Version Enabled ID
    Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
    Adblock Plus Pop-up Addon 0.9.2 true [email protected]
    Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
    Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
    Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
    Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
    Graphics
    Adapter Description Intel(R) HD Graphics
    Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
    Adapter RAM Unknown
    Device ID 0x0046
    Direct2D Enabled true
    DirectWrite Enabled true (6.2.9200.16571)
    Driver Date 1-30-2013
    Driver Version 8.15.10.2993
    GPU #2 Active false
    GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
    Vendor ID 0x8086
    WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
    windowLayerManagerRemote true
    AzureCanvasBackend direct2d
    AzureContentBackend direct2d
    AzureFallbackCanvasBackend cairo
    AzureSkiaAccelerated 0
    Important Modified Preferences
    Name Value accessibility.blockautorefresh true
    accessibility.typeaheadfind.flashBar 0
    browser.cache.disk.capacity 358400
    browser.cache.disk.smart_size_cached_value 358400
    browser.cache.disk.smart_size.first_run false
    browser.cache.disk.smart_size.use_old_max false
    browser.cache.frecency_experiment 1
    browser.places.smartBookmarksVersion 7
    browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
    browser.startup.homepage www.google.com
    browser.startup.homepage_override.buildID 20141023194920
    browser.startup.homepage_override.mstone 33.0.1
    browser.tabs.loadInBackground false
    dom.mozApps.used true
    extensions.lastAppVersion 33.0.1
    font.internaluseonly.changed true
    gfx.direct3d.last_used_feature_level_idx 1
    keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
    media.gmp-gmpopenh264.lastUpdate 1413750166
    media.gmp-gmpopenh264.version 1.1
    media.gmp-manager.lastCheck 1414375733
    network.cookie.prefsMigrated true
    places.database.lastMaintenance 1414404204
    places.history.expiration.transient_current_max_pages 102059
    plugin.disable_full_page_plugin_for_types application/pdf
    plugin.importedState true
    plugin.state.npmedia 0
    plugin.state.nptimegrid 1
    print.printer_Canon_MG2100_series_Printer.print_bgcolor false
    print.printer_Canon_MG2100_series_Printer.print_bgimages false
    print.printer_Canon_MG2100_series_Printer.print_colorspace
    print.printer_Canon_MG2100_series_Printer.print_command
    print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
    print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
    print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_edge_left 0
    print.printer_Canon_MG2100_series_Printer.print_edge_right 0
    print.printer_Canon_MG2100_series_Printer.print_edge_top 0
    print.printer_Canon_MG2100_series_Printer.print_evenpages true
    print.printer_Canon_MG2100_series_Printer.print_footercenter
    print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
    print.printer_Canon_MG2100_series_Printer.print_footerright &D
    print.printer_Canon_MG2100_series_Printer.print_headercenter
    print.printer_Canon_MG2100_series_Printer.print_headerleft &T
    print.printer_Canon_MG2100_series_Printer.print_headerright &U
    print.printer_Canon_MG2100_series_Printer.print_in_color true
    print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
    print.printer_Canon_MG2100_series_Printer.print_oddpages true
    print.printer_Canon_MG2100_series_Printer.print_orientation 0
    print.printer_Canon_MG2100_series_Printer.print_page_delay 50
    print.printer_Canon_MG2100_series_Printer.print_paper_data 1
    print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
    print.printer_Canon_MG2100_series_Printer.print_paper_name
    print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
    print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
    print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
    print.printer_Canon_MG2100_series_Printer.print_plex_name
    print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
    print.printer_Canon_MG2100_series_Printer.print_resolution_name
    print.printer_Canon_MG2100_series_Printer.print_reversed false
    print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
    print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
    print.printer_Canon_MG2100_series_Printer.print_to_file false
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
    privacy.sanitize.migrateFx3Prefs true
    privacy.sanitize.timeSpan 2
    storage.vacuum.last.index 1
    storage.vacuum.last.places.sqlite 1412311800
    Important Locked Preferences
    Name Value
    JavaScript
    Incremental GC true
    Accessibility
    Activated false
    Prevent Accessibility 0
    Library Versions
    Expected minimum version Version in use
    NSPR 4.10.7 4.10.7
    NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSUTIL 3.17.1 3.17.1
    Experimental Features
    Name ID Description Active End Date Homepage

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    I tried to answer in your other post.. please stick to one thread ..
    What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

  • My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

    My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

    Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

  • My printer does not work with mountain lion

    I recently upgraded to Mountain Lion and now my HP Officejet Pro 8600 printer does not work.  I downloaded the required driver from the App Store but am still not able to connect.  Is there actually a solution for this or do I need to find a way to downgrade my OS to one that is compatible with my printer?

    From the HP site:
    Compatible operating systems
    Microsoft® Windows® 7, Windows Vista®, Windows® XP (SP3)* or higher (32-bit only): *Supports 32-bit only; Mac OS X v 10.5, v 10.6 or v 10.7; Linux (For more information, see http://hplipopensource.com/hplip-web/index.html)
    But then also on the HP site they have drivers for the printer for 10.8. See here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4323659#N194
    I would try the driver from HP.

  • Fetch new mail messages does not work

    On my notebook the fetch new mail messages does not work
    Settings:
    - Fetch new messages:     every minute
    - Play sound Purr
    I need to us the manual button.
    On my imac it works fine with the same accounts

    My mail sounds are all screwed up. I hear the plane fly when I send an email but when I receive mail, no sound. I have rules set up which worked in Tiger. One rule is for mail to play a message "You have a message from "John Doe" when I receive an email from "John Doe" but it only plays when I send "John Doe" and email. Assbackwards.
    Sometimes when reading new mail, it just disappears. I have to click on it again. I find this version of email to be very flaky!
    Dave Brenneman

  • My new orkut page does not works anymore after uptading firefox from Firefox v9.0.1 to 10

    My new orkut page does not works anymore after I uptaded this morning my browser firefox from Firefox v9.0.1 to 10 . How can I find that version mozilla Firefox v9.0.1???

    Hello, friend. Thank you so much. I've already solved the problem once you sent me that link.
    Cheers!

  • My canon printer does not work with firefox12

    my canon printer does not work firefox 12 edition

    Try to reset the print prefs.
    See:
    *http://kb.mozillazine.org/Problems_printing_web_pages
    *https://support.mozilla.org/kb/Printing+a+web+page
    There are other things that need your attention.
    Please Update to the latest Firefox 17.0.x version.<br />
    The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
    *Help > About Firefox
    *https://support.mozilla.org/kb/update-firefox-latest-version

  • Upper speaker in my new iPhone 4 does not work properly. I hear strange sounds instead of speech. What to o?

    Upper speaker in my new iPhone 4 does not work. When somebody calls me I hear only strange sounds. Please, help!

    A couple of other things you can try -
    With my 2010 Ford Fusion (and SYNC) I received the same not optimized message a few times. There were several things I had to do but eventually, I got it cleared up. Not sure exactly how this will translate to your Toyota but maybe it will.
    - Try resetting the iPhone via a power off/on or a hard reset where you hold the home and power buttons. Then power back on and plug into your USB port.
    - In my case I had an issue with SYNC in my car where I needed to reset the USB port in my car. Not sure if Toyota has something similar. The fact that you said it won't charge makes me wonder if the USB port got disabled in your car. This happened in my car and an easy reset for me was to remove a fuse for a few minutes and replace.
    - Update your iPhone in iTunes and resync it there. Then try connecting again in yor car.
    - Delete and re pair your iPhone from your Toyota system
    Hope something here helps. Thanks

  • New Applications model DOES NOT work with StandAlone OSD media

    If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
    - The creation of the media will be successful
    - The application installation itself will be successful
    Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
    causing the task sequence to error out..
    Thanks,
    Squirre1

    It is very similar to this description:
    http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
    It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
    the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

  • My HP photo smart  C6280 printer does not work with CS6.  Any Help?

    My HP photo smart  C6280 printer does not work with CS6.  Any Help?

    How does it "not work"?
    What OS version are you using?

  • Reverse Printing Does not work in acrobat 9 pro

    Can anyone help with this? any suggestions?  I am trying to print a PDF portfolio. I need them to print in the reverse order they are currently printing in and checking the box Reverse pages does nothing??

    This does not work in Acrobat XI either for Office 64bit (Office 2013 64 bit)
    Does anybody know the fix for this?
    I called tech support today but they dont seem to know anything about the error although its a known issue with all previous versions of Acrobat for serveral years now.
    I really need to make this work, there is a random google post where I have ot make some regedits, but why can't Adobe fix this known issue since it is nothing new?
    My basic understanding at this point is that even Acrobat XI is a 32 bit app and the programmers at Adobe still dont know how to write the API to talk to a 64bit mail client?
    I really need some help on this if anybody has a real solution.
    Thanks!

  • Epson R2880 printer does not work under 10.6 - how to install 10.5?

    Similar to the many problems reported here, my brand new still in production mid-to-high-end printer from Epson does not work. I set aside my Epson 1270 when I realized that they would never support anything that old, but to not support a current expensive model!?!? I would never have bought it except that their web site claims 10.6 compatible drivers. Not true. I can use it as a text printer, but have none of the photo print options that I paid for.
    Running on an iMac which I bought just before 10.5 came out. I never loaded 10.5. I paid the big bucks for a full upgrade from 10.4 to 10.6. I have found a 10.5 retail package. Once it arrives, what do I need to do to write 10.5 over the newer 10.6? Do I need to backup and erase everything, reinstall 10.4 and then 10.5? Or is there a reasonably reliable way to just load 10.5?

    The easiest fix to this issue that I've found is to just use Sierra's software.
    It means you don't get the nice built-in WWAN integration of 10.6, but whatever--it works!
    http://www.macupdate.com/info.php/id/25530/sierra-wireless-watcher

Maybe you are looking for

  • Problems in creating PDFs from Indesign under Snow Leopard

    The Acrobat PDF Printer does not work under Snow Leopard anymore. Adobe gives this alternative: http://kb2.adobe.com/cps/509/cpsid_50981.html After an update to Acrobat 9.1.3 PDFs should now be generated through a new "Save as Adobe PDF" option under

  • Can't get views to work on webparts on an enterprise wiki

    Hi I'm trying to make an Enterprise Wiki that contains 3 types of content types company, project, contact. On the home Page I added 3 webparts (from pages) corresponding to the 3 content types above. I then made a page layout for each content type. I

  • How to activate Image, Pdf, Hyperlink and Scale Prices in SRM-MDM

    Hi Experts, I have requirement to activate the following features: 1. Image 2. PDF 3. Hyperlink 4. Scale Prices These should be activated and should be available in the current business' internal catalogs so that users could be able to easily identif

  • How to get name of missing font

    Hi, I'm sure this is an easy one but..my pc crashed and i lost loads of fonts. when I now open old work, it naturally tells me fonts are missing. problem being, that i can't remember which fonts i used on every piece of work. Is there a way of firewo

  • Bapi-- search help

    hoe i can make s.help with bapi in program