New router, Qwest PK5000, iPad does't see printer

I recently bought the hp photosmart 310a printer so I could print from my iPad.  It worked great until a couple of weeks ago when my router died. The new router is Qwest PK5000.  My desktop and laptop see the printer and print fine, but my iPad can't find it.  It is online just fine, but doesn't,t see the printer.  I called Qwest and they said since the iPad was online it wasn't their problem, it was something with the printer.  Big help!  I am not technical at all and don't know what to do now.  Any help would be gratefully appreciated!

This is a problem with your router. See the thread below and the other threads listed in the "More Like This" box on this thread page:
https://discussions.apple.com/message/15368008#15368008

Similar Messages

  • Ipad does not see airprint priner (HP 2545 all in one ink advantage) despite they are in the same wifi network.

    I ve got Ipad 7.1.1 and use airprint printer HP deskjet 2545 ink advantage all in one series which is airprint. Ipad does not see it despite it is in the same wifi network. I have test it through printer. direct printing is available since Ipad finds printer while searching networks? I have allready turn off and restart everthing, reinstalled printer to my laptop to ckeck connection to wifi network, but still ipad cannot see airprint!!what can possilby be happening?

    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

  • HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

    I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

    One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
    Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

  • Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone.  Her phone says we are paired but my iPad does not see the pair; it says it is unsupported.  Any suggestions?

    Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone.  Her phone says we are paired but my iPad does not see the pair; it says it is unsupported.  Any suggestions?

    The iPad message is correct, it is unsupported. You cannot pair your iPad with your friends phone. Bluetooth on the iPad is designed for the use of headphones, keyboards, speakers and some peer to peer gaming.

  • I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

    I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

    Answered this question with a reply from "how does an iphone forget a network" response

  • Ipad does not find printer

    I have new Epson printer with airprint possibility. Printer is on wifi and iphone can see it and print files. but ipad does not find printer at all?

    Apple has some troubleshooting tips at the bottom of this page that may help:
    http://support.apple.com/kb/HT4356
    Regards.

  • HP 3050A works for printing wirelessly from my laptop but not my iphone or ipad They both see printe

    My 3050 prints wirelessly from my laptop but won't print from my iPad or iPhone
    They both see the printer
    I had changed my router that seems to cause the problem

    Well how did you install the new router?  New SSID and paraphrase?  You have to input the correct information into your drevices.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Rendezvous does not see printer

    Hi,
    One of the MACs sharing a usb printer on a AEBS network does not see the printer in Rendezvous. All the other computers printing through the AEBS can do so with no problems. OS is OS X 10.2.8.
    Any suggestions are appreciated.
    Ed

    I'd be interested in seeing any responses here from others using a Mac running MacOS 10.2.8 to print via an Airport Extreme Base Station. It is my impression that firmware versions 5.5 and newer for the Airport Extreme Base Station have give many users of pre-MacOS 10.3 Macs problems with printing.

  • I got a new router and i need to connect my printer now but do not have the cd for my printer?

    1. HP Deskjet 3050A All-in-One Printer J611g
    2. Windows 7
    3. no wireless connection
    4. got a new router
    5. I got a new router, therefore, a new SSID. I no longer have the printer CD to change the printer SSID and do not know how to do it without the CD

    Hi BethWells, for a start go to the link below
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5061...
    Then download the full feature software. I'm not familiar with this printer model, but normally HP full feature software is the same as the CD.
    Though I work for HP, I'm speaking for myself and not HP. I'm just trying to help with my limited knowledge
    **Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.**

  • Network printer works wifi but iphone does not see printer

    network printer works wifi but iphone 4 does not see printer

    see if your printer is compatible http://support.apple.com/kb/ht4356
    trouble shooting http://www.apple.com/support/iphone/assistant/airprint/

  • HT4356 My iPad does not see my printer on the network.  The printer says it is connected and I can ping it from my pc, but the iPad does not seem to be able to find it.  I am going though an AOL supplied router, I have read this can cause issues, is this

    I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it.  I am using an AOL supplied router and have read reports that this can cause problems.  Is this the case? How do I resolve this issue?

    Hi,
    That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
    Bonjour Services relies on IP Multicasting which have to be supported by your network.
    To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
    Once the iPad connected to the Wireless Direct network try printing and check for any difference.
    If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
    In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
    Shlomi

  • My iPad does not see any network and i cannot get to place to enter manually IP address etc.

    I have several apple products connected on home wi-fi network. On my ipad, it does not even see the network.  I would put IP etc in manually but I cannot get to that page to do it.  Where is it? 

    Settings>WiFi>Other. Enter your network name and password.
    Have you tried .... Settings>WiFi>Tap your network name>Tap the blue arrow on the right>Forget this network. Restart your iPad then go back to the WiFi settings and try again?

  • Since IOS8 and iMovie 10.0.5, using Theater, I cannot transfer my movie to my iPad.  iPad does not see the movie via iCloud.  What other ways can I transfer my movie from my iMac to my iPad?

    Before installing iOS8 on my iPad, and also updating to iMovie 2.1; and installing the Maverick on my iMac, new movies I make on the iMac and load into Theater do not come over to my iPad.  This seems to be due to a new Yosemite OS no yet released.  What are a couple of other ways I can transfer my movie to my iPad?  I am out of ideas. 

    These are user-to-user forums, you are not talking to Apple here.
    Audiobooks (and ringtones) are currently a one-time only download. I believe that they are all supplied to Apple by audible.com, so I assume that it's them who are requiring the one-time only download restriction. To get it onto your other devices you will need to sync it via a computer. Depending upon what country that you are in, Audible.com have their own app (Audiobooks from Audible) so you might be able to buy direct from them, though I don't know whether you can buy within their app or download audiobooks directly from them within the app e.g. whether they need to be copied via a computer.

  • Added AirPort express to extreme but my iPad does not see the express

    I wanted to extend my network due to "dead spots" in the house and patio but no change after adding the AirPort express to my extreme. It set up fine and both with a green light but the bars on the iPad have not changed. It still has a slow connection despite being in the same room as the express. I set it up as a N-device (the express) per the instructions to extend a network. Our home phone is 5.8GHz & should not interfere. Apple Tv & iPhone 4 work but did before. What have I missed??

    It sounds like the Express is not "extending" Quick check points:
    On the AirPort Extreme
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab below the icons
    Make sure that there is a check mark next to "Allow this network to be extended"
    Update to save any changes
    On the AirPort Express
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Same name as the Extreme network
    Make sure there is a check next to "Allow wireless clients"
    Security = Same setting as Extreme
    Password = Same as Extreme
    Update to save any changes
    If you have a laptop handy, turn off the wireless on the laptop and temporarily connect it to the ethernet port on the Express with an ethernet cable. Open your browser. If your Express is "extending", you will have internet access.

  • AirPort Extreme does not see printer, hard drive, AirPort Express!

    I just got an AirPort Extreme (802.11n), to replace my AirPort Express. I have a Brother 665CW wireless all-in-one printer, which had worked perfectly but now I cannot find it. I have also hooked my USB hard drive into the Extreme. I can see the hard drive in the AirPort Utility, but I don't know how to find it from my iBook. I'd also like to put the Express in another room to use the AirTunes feature. Unfortunately, almost nothing is working!
    Here is how it's set up:
    Den:
    AirPort Extreme - hardwired to:
    - DSL modem
    - hard drive (via USB)
    Brother 665CW (wireless)
    Living Room:
    AirPort Express
    Advice would be appreciated. I'm usually able to troubleshoot my problems, but documentation on this Extreme is really bad! Thanks!
    iBook G4   Mac OS X (10.4.9)  

    I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
    Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

Maybe you are looking for

  • Special character problem in XSLT

    When using escaped output charcters like: < &; > &quote; etc, the lt and amp just don't seem to be handled correctly. Result for the above code is: < & > "Instead of the < and & you would expect, you get the ascii codes. What do I have to do to get <

  • Urgent------------ report generation---------------

    Hi SAP Champs I'm new SAP, i would like to know how and what is the procedure of getting reports on FI and CO . i would like to know how one can see wat cost center ,business areas.organization structure of different module?? regards priyanka

  • Error while testing via WS Navigator.

    Hi, My scenario is SOAP>PI>FTP. I was trying to post the data via WS Navigator tool. I have generated wsdl URL as per the forum comments. http://host:port /XISOAPAdapter/MessageServlet?channel=:s:c Also I can see when we do display WSDL in ID object,

  • Size of the SystemTray?

    Hi, I want to display a message that fades in/out (aka Outlook message) just above the SystemTray in the lower right screen corner. Is there a way to determine the height of the system tray? Using Toolkit.getScreenSize().getWidth() I can find out the

  • Can TV show episodes downloaded from iTunes be converted?

    Can TV show episodes downloaded from iTunes be converted for my non-ipod mp3 player? It's made by Creative Zen and does have a video converter to get files into the right format, but is there something about iTunes TV episodes and their encoding that