New router unable to connect wirelessly to C4380 that had printed wirelessly with prior router.

My Verizon router was replaced. Have not been able to re-establish the wireless printing connection with C4380(DED3F7). Frustrated! BBlaine

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
I can surf the web. My wife can print from her PC wirelessly on it.
I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
it still shows "off line"
with the printer power on. Any suggestions?

All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later

I have locked myself out of my iphone 4s, when i connect to itunes it says it is unable to connect to my phone as it is locked with a passcode?

Hi I have locked myself outi of Iphone, changed the passcode and i have subsequently forgotten it! .... i have connected my phone to itunes and that just brings a message up saying that it is unable to connect to my phone as it is locked with a passcode ... how can i unlock it?

Follow the directions here:
http://support.apple.com/kb/HT1212

Downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?

downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?
I click on the launcher and nothing happens, 15 min later it will tell cant connect to the server.
My computer is a windows 8.1; 64 bit operating system. I am stationed in South Korea, but that should not affect the program. Help please.
John

Hi johnd83157268,
Sorry for the inconvenience that has caused to you.
Could you please let me know what changes have you made in the registry.
You might need to uninstall Adobe Reader from Control Panel and try install it again from the following link:
Adobe Reader Install for all versions
Please ensure that you are logged in as administrator and anti-virus is disabled as that might interrupt installation.
Try again and then let me know.
Regards,
Anubha

Sharepoint Integrated SQL Reporting - Unable to connect to the server that is specified......

This is driving me crazy. I have Reporting services implemented on several sites in Sharepoint. For some reason just one site refuses to work. I see all the features are there. I can create data sources.
When I try to create a report I get :
"Unable to connect to the server that is specified in the URL,
http://help.site. Make sure that the server is running, the URL is correct, and you have permission to use the server"
I'm using my domain admin account, I know know this works on every other site. I know I haven't forgotten the general setup of the service.
The only difference is this site allows "anonymous" connections. Has anyone heard of an issue about using anon and reporting services? Either way I authenticate before I login but that doesn't have an effect.
David Jenkins

Thank you forums!!!!
I found an existing thread.
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/d815b9fb-3431-490d-bd51-e7e21fcb788e
1) Opened up IIS
2) Expanded my intranet folder
3) Expanded _vti_bin
4) Highlighted "ReportServer"
5) Double Clicked on Authentication
6) Disabled "Anonymous Access" to the reporting folder itself
7) Opened report builder 3.0 and typed in http://intranet.company.com" BOOM instant connection :D
David Jenkins

Unable to connect to database; verify that database TCP/IP port service is

Hi i have a problem with a few servers when i'm trying to upgrade from SAP 2007 SP00 PL47 to SAP 2007 SP1 PL06, i run the upgrade for SBO-COMMON and gives me the message Unable to connect to database; verify that database TCP/IP port service is started, and i don't know why, i hope you can help me.
Julieta

Hi,
Ensure that the connection to the database is configured properly.
1. Check that the TCP/IP port is not being blocked by a Firewall.
2. Set the Server's Remote Connection to accept TCP/IP connections.
Microsoft SQL Server 2005 -> Configuration Tools -> SQL Server Surface Area Configuration -> Server Surface Area Configuration for Services and Connections -> MSSQLSERVER -> Database Engine -> Remote Connections
Restart the 'SQL Server (MSSQLSERVER)', and run the upgrade again.
Hope this will resolve your issue !

Unable to connect to Database, Verify that database TCP/IP service is start

Hi All,
During the installation of SERVER (2007 B), the next installation wizard is "Integration Platform". It requires the conncetion with SBO-COMMON. But this is giving me the Error Message - "Unable to connect to Database, Verify that database TCP/IP service is started. What is this means ? I have checked TCP/IP is enabled on my system.

Anuj,
You need to verify that you have TCP/IP in the SQL Server Client settings set to "enabled".
Eddy

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

I have a new MacBook Air 11'inch and I presume that it should come with the iLife programs. However, when I signed into the appstore with my account I have used with all of my Mac products, it now said I had to purchase each program, like iPhoto seperate

I have a new MacBook Air 11'inch and I presume that it should come with the iLife programs. However, when I signed into the appstore with my account I have used with all of my Mac products, it now said I had to purchase each program, like iPhoto, iMovie, ect. seperate. I have already logged in and out of my account and called the "free" part of tech support. How can I reslove this issue?

Welcome to Apple Support Communities
If you really have a new MacBook, iPhoto, iMovie and GarageBand come with the Mac for free.
As you see their price at the Mac App Store, it's clear that there's a problem with your MacBook. Simply return it if you purchased it less than 14 days ago and you will receive a new MacBook

I can't upload new apps or updated apps, and it shows that I have problem with last purchase. I guess my credit card is over limit and the purchase is not completed because of uncollected. I have filled up some to my credit card. Will it deduct later?

I can't upload new apps or updated apps, and it shows that I have problem with last purchase. I guess my credit card is over limit and the purchase is not completed because of uncollected. I have filled up some to my credit card. Will it deduct later?
The problem is I have no computer to use the Itunes and can't go to last purchase. Also, I have ipad 2 using the same adminstrator and have the same problem.

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

We reset our wireless router and lost connection between our MacBook and our J4680 wireless HP print

I have tried to reconfigure, have deleted and re-added the printer, locked the print/fax preferences, and still are unable to get the printer to respond to a print order. When I re-added last time and configured, a test sheet was successfully generated, but still the print page states that the printer in not properly configured

From the front of the printer: Setup > Wireless > Restore defaults.
From the same Wireless menu, run the Wireless Setup Wizard.
Now, on your Mac reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Netgear DGND3300 Router and HP C4780 cant get set up to print wireless

Ok I've read just about every networking post and cant solve my issue.
History: I recently upgraded from a 2Wire DSL router/modem to the new Netgear dual band 3300.
After I made the change, I went through all the reinstalls and network configurations and all worked great.
Then one day while working from home the printer stopped printing wireless for both the Apple Laptop and my Lenovo laptop.
So I uninstall all the HP software from my Lenovo and reinstall, go through all the steps plugging in the USB cable from the printer. I locate the correct SSID and enter the WEP on the HP printer install.
This is where I lose it, in the printer set up a this point it tells me the SSID on the printer and the machine have different SSID. I know they are both on the same network as I confirm on my wireless setting on the Lenovo and when going through step by step on the printer install.
I read where you can log into the printer with the IP address to edit settings. so I print the HP Network configuration page, it gives me the IP address. when I try to log onto the IP it does not take me to the printer....it goes to some google page.
I'm no tech but this isnt my first rodeo. Any help would be greatly apprecaited, this is day 3 on my own. Need the big guns.
thank you

OK, here are a few ideas:
1. Don't use WEP. It is not secure and can cause connectivity problems. Use WPA or WPA2
2. Make sure that 802.11g is available. 802.11n and others can also be available, but g must be present.
3. Broadcast your SSID and do not use MAC filtering.
4. Make sure the firmware in your router is up to date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to connect to HP Officejet 6600 after printer enters sleep mode

Actiontec MI424WR wireless router
HP Officejet 660
Dell XPS 8300 (Windows 7, Windows Firewall, Microsoft Security Essentials)
IP Address range: 192.168.1.x
Printer is assigned static IP address
The HP Officejet 6600 printer is easy to set up and works great...for about 15 minutes. Then the printer goes to sleep and the wireless connection dies. Repeatedly. I am never able to restore the wireless connection without rebooting the printer, computer AND the router. I've been dealing with this issue off and on since I purchased the printer four months ago.
I can see from forums that I am not the only one with this issue. What I can't see (anywhere) is a solid fix for the issue.
I can tell you:
1. It's NOT the windows firewall. I've tried it with the firewall on and the firewall off.
2. It's NOT the antivirus software. I've tried it with the service running and the service stopped.
3. It doesn't matter whether the IP address is statically assigned or assigned with a DHCP reservation (though you do need to do one or the other)
4. Adding an ARP static entry helped a little bit to get rid of the "Host reports destination unreachable".
5. It doesn't matter whether the Bonjour service is running or not.
6. It doesn't matter whether the printer is configured for wireless direct printing or not.
7. I updated to the most recent firmware for the printer: that didn't help.
8. I'm positive that the printer is connected to the wireless router correctly.
I ran telnet from my pc to the printer (on port 80) and received no response. I can only conclude that somehow, there's a service that's supposed to be running on the printer that has died or that fails to register properly with the router.
Right now, I'm back to a direct connection between the printer and the computer (usb cable). Which means I can only print from the one device.
I have no intention of purchasing another HP product any time soon. I'll be sure to go out of my way to find knock-off cartridges as well.
Ugh.

Just to verify, what is the DHCP range in the router? Starting and ending addresses? What is the printer static IP at?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Unable to connect my Macbook to a network printer

Hi,
My problem is specific to Canon iR2016 printer model which is connected to a router which in turn is connected to a wireless router. I want to connect my macbook pro to this printer, which somehow I am not able to.
Till now I have gone to "Print & Fax", clicked on "+" sign, then clicked on the "Windows" tab. There I can see the network printer listed. I select it, then asks for software driver or printer model. Now here I select Printer model, but my model iR2016 is not listed. Then I select generic Post script printer and Add. The printer gets added, but when I print, nothing prints. I also tried with generic laser printer option, but no luck.
Look forward to feedback.
Thanks.

Checking the Canon Australia web site the iR2016 lists UFR2 and PCL5e/PCL6 as supported print languages. Postscript was an option and given that the Generic PS did not work then it would be safe to assume that this option is not installed.
If you have installed the UFR2 v1.80 driver then you add this printer by selecting More Printers > Canon IP (UFR II). If you have installed the v2.xx driver then you simply select IP > LPD for the protocol. This then requires you to enter the IP address of the iR2016 and then you can browse for the iR2016 in the Print Using menu. However this is for a direct IP connection. You cannot use the UFR2 driver via the Windows share, which you mention trying.
So if the printer has its own Ethernet connection to the network then select to add the queue using IP > LPD, enter the IP address of the iR2016 and in the Print Using menu type 2016 to filter the list to the correct model. It should show UFRII in the name. Select this and you should be able to print.

New router unable to connect wirelessly to C4380 that had printed wirelessly with prior router.

Similar Messages

Maybe you are looking for