New Rupee Symbol required in SAP

Hi Team,
I need to introduce the new Rupee Symbol in the SAP System. So that the invoice/smart form and the reports can have the same. Can you please help me on how to get this done.
Regards,
Rajneesh

Hi Rajneesh,
You might need to scan a copy of a new rupee print and store it as a soft copy and pull into the required outputs. I am not quite sure from a regulatory stand point if you can directly print a rupee symbol and use. If its just a symbolic representation for your outputs I think you can scan one and pull into the required output window of your smart form. Your abaper can help you do it..should be relatively an easy thing to do.
regards
Sadhu Kishore

Similar Messages

How to bring new rupee symbol in reports

Dear Gurus,
We have a requirement that in all the exixting reports we need to show the new rupee symbol as $ comes doe USD.
Please help me with the steps to do this.
Thanks in advance.

Suggested by SAP in OSS 1503523
Solution
We recommend to postpone usage of the new character INDIAN RUPEE SIGN until the character and its code point have been formally released with Unicode standard 6.0.
When you decide to use INDIAN RUPEE SIGN before it is formally released, make sure, that your input methods and fonts use the code point U-20B9 for the INDIAN RUPEE SIGN and that the official layout of the INDIAN RUPEE SIGN is used.
Using a different code point for the INDIAN RUPEE SIGN will cause future problems with data consistency, data communication and searching.
SAP currently does not provide input methods or fonts which cover the INDIAN RUPEE SIGN nor has any suggestions, which input methods or fonts can be used.
INDIAN RUPEE SIGN cannot be used in Non-Unicode SAP systems.

New Rupee symbol

Hi folks
Please anyone tell me how to write the new rupee symbol in iPad.I am using the default system keyboard iOS 5.1.

Type Rupee symbol ₹ in iPhone.
1. Go to settings > general > keyboard.
2. Select keyboards > add new keyboard > Hindi
3. Now go back to keyboard.
4. (Scroll down) Add new shortcut.
5.. In "Phrase" press long "$" and select "₹".
6. In "Shortcut" type "Rs" and save it.
4. Now you can remove the hindi keyboard.
and whenever you type "Rs" it will automatically change to "₹".

Defaulting the new Indian Rupee symbol in Numbers

In Numbers, when I choose Indian Rupee as currency in cell format, I am still getting the old Rupee symbol. When I try to change the symbol to the new one, the cell format is getting changed as text.
How do I default the new Rupee symbol in cell format?
Meaning when I go to the inspector, under "Cells" when I choose Cell format as Currency, I get a drop down of various currencies, including that of Indian Rupee. Here I want the new symbol to be defaulted.

As far as I know, the feature which is not a Numbers one but a system one is unavailable.
At last Apple adopted a more correct list of currencies symbols but I guess that they will need about ten years to discover that there is a new one for the Indian Rupee.
On my French System, your currency is displayed as "Rs".
My own tip would be to use two columns, one fo the amounts, one for the Rupee symbol.
We see the columns when the cursor is in the table but we don't see the separator, defined to None, when the cursor is no longer in the table.
Of course, you are free to send a request to Apple thru the dedicated channel :
Go to "Provide Numbers Feedback" in the "Numbers" menu, describe what you wish.
Then, cross your fingers, and wait at least for iWork'11 or 12 ;-)
I must add that I guess that if you get satisfaction one day, it will be an incomplete one.
On my French system, the currecy used here is correctly displayed as € but if I run the system in a language unused in Europe, the same currency is displayed as Euro.
Same behavior withe the dollar. When exemples are posted here by US askers we may see $ 12.45
but if I run the original document here on my French system, I get : 12,45 $US
Yvan KOENIG (VALLAURIS, France) samedi 29 octobre 2011 19:30:03
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Rupee symbol

how can i write new rupee symbol in my iphone ??
i have no any idea some body can help me??

What keyboard are you using?

Indian Rupee Symbol in Smartform

Hi All
I have got a requirement in which i need to use the recently announced Indian Rupee Symbol in my Smartform. I need to use it in the table being displayed in the Smartform, in front of the Amount in each row, i need to dispaly the symbol.
I have no idea of how to do it.
Kindly help me out
Thanks in Advance...

Hi
I Am Just New in the sap abap .
i also have this type of requirnment for my smartform.
i got the soluction
here is the steps of rupee symbol in smartform.
Step:- 1 Download Rupee Font From [http://blog.foradian.com/font-with-indian-rupee-symbol-download-and-us|http://blog.foradian.com/font-with-indian-rupee-symbol-download-and-us]
Step:- 2 Open T-CODE SE73
Step:- 3 Install True Type Font And Give Name To Font
After sussfully instalation you can use that forn in your smartstyle and u can use that symbole
NOTE:- To Insert Rupee symbole You Have To Press ` Button Near To 1 Key
Soem Times it will not display in editor or in print Priview but it will print in the hardcopy.
Later On I Will Put Step By Step Step With Screenshot .
If Anyone Have Emergency Then Replay Me i Will DO it
Edited by: SAPABAP.IN on Nov 1, 2010 11:43 AM

Indian Rupees Symbol In samrtform

How to print new Indian Rupees Symbol In samrtform , which recently comes from RBI,
Moderator Message: Duplicate post. Did not search and either way you've got enough replies.
Edited by: kishan P on Oct 12, 2010 7:17 AM

Hello,
Please check the SAP note 1503523 for your problem.
A summary of the content is given below:
-The Unicode Consortium plans to encode INDIAN RUPEE SIGN on code
point U+20B9. It is planned that this encoding decision is formally
released on October 11th with Unicode 6.0.
- We recommend to postpone usage of the new character INDIAN RUPEE
SIGN until the character and its code point have been formally
released with Unicode standard 6.0.
- When you decide to use INDIAN RUPEE SIGN before it is formally
released, make sure, that your input methods and fonts use the code
point U+20B9 for the INDIAN RUPEE SIGN and that the official layout of
the INDIAN RUPEE SIGN is used.
- Using a different code point for the INDIAN RUPEE SIGN will cause
future problems with data consistency, data communication and
searching. Especially code point U+20A8 RUPEE SIGN may not be reused
for the INDIAN RUPEE SIGN since the technical behaviour of the to
characters is different.
- SAP currently does not provide input methods or fonts which cover
the INDIAN RUPEE SIGN nor has any suggestions, which input methods or
fonts can be used.
- INDIAN RUPEE SIGN cannot be used in Non-Unicode SAP systems.
Regards,
David

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

VL10 A - Data type "LIKPVB" was found in a newer version than required

hi Gurus!
in transaction VL10A i get a short dump that states that the data type LIKPVB was reloaded and but in a newer version than required in program RVV50R10C.
I checked the abap dictionary for the data type and it said that it was modified a month ago by SAP.
To my knowledge no new configuration or notes ware applied around this period.
The solution that the dump indicates is really wise "try to restart the program".
I searched for sap notes that would apply or sdn posts and came up empty.
Please help !

I guess you have no clue either...
any hints?

How to create new text symbols for the standard program.

Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen.
I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones.
Does anybody know something about that? Thank you.

hi ming yu,
example : %_MATNR_%_APP_%-TEXT -> this is the material description name in mb5b
change the description in ur enhancement implementation
%_MATNR_%_APP_%-TEXT = 'Material'
it is works only input/output field
Thanks&Regards,
naveen

Indian Rupee Symbol For N8.

Indian government recently launched rupee symbol for all thier business and tradings. same like US $,and pound. but sadly there is no such symbol in nokia India devices. already lava mobiles added this symbol in thier mobiles. hope nokia can provide this rupee symbol in all thier mobiles asap atleast in new software updates.

Hi kaushalps ,
Welcome to the Forum..
This is a User-to-User Forum. Pl. use the 'Contact Us' tab at the top of this page to contact Nokia regarding your suggestion...

Create new dimension on top of SAP BW data

Hi expert,
I'm having a problem to create a new dimension on top on SAP BW data. I have a dimension details object called 'L01 G/L Account Key'. When I drag this object to the result object in the web intelligence, it display full data like '1000/30100'. How can I trim the data so it shows '30100'?.Is there any formula that support in universe?
I don't want to do the formula inside the web intelligence report because I want to use this dimension to other reports as well.
Please expert....help me!
Thanks & Regards,
Syahida-

Hi,
SAP BW MDX does not support calculations that return string or date: this is a limitation of SAP BW OLAP engine.
By the way I found exceptions that satisfy your requirement.
For instance you can manipulate a substring of a dimension only with NAME and UNIQUENAME attributes.
Example, you can use these expressions:
<EXPRESSION>right([OD_COUNTRY].currentmember.name, 4)</EXPRESSION>
<EXPRESSION>right([OD_COUNTRY].currentmember.uniquename, 4)</EXPRESSION>
<EXPRESSION>left([OD_COUNTRY].currentmember.name, 4)</EXPRESSION>
<EXPRESSION>left([OD_COUNTRY].currentmember.uniquename, 4)</EXPRESSION>
<EXPRESSION>mid([OD_COUNTRY].currentmember.uniquename, 2,4)</EXPRESSION>
Regards
Didier

New Business Process Requirement

Hi All,
I have a new business process requirement from my client.
My Client has their own product which they do normaly sell them and is called product A. Now they are planning for some new products. For this they purchase some WIP materials called product B & C from vendors and assemble them along wth product A. The assembled product which is called D is sold as finished product. this product D consists of product A and product B&C. Now in this type of scenario what should be the planning strategy? And also please let me know how to incorporate the assembling part in the present SAP system?
Thanks,
Rinky

Rinky,
What is the problem? D is just another finished goods. Is there something unique about this scenario?
D BOM = A, B, C
D assembly effort is contained in D routing, the same way you would create a routing for any other FG product.
D strategy is whatever your client wants. MTS? MTO? Forecasted? You pick the strategy the same way you would pick any other FG planning strategy.
A you need change nothing
B you need change nothing
C you need change nothing
Am I missing something here?
Rgds,
DB49

Can not Import Indian Rupee Symbol in Adobe workspace

When I import a symbol Indian rupee symbol ` it gets replaced by `
How should i have a Rupee Symbol in Adobe workspace ?

Hi,
Please refer to SAP Note 1503523.
Regards,

New Currency symbol is OBIEE

Hi
I am using OBIEE 11g and in my reports i want to use Indian rupee Symbol in Coumn headings
I have downloaded the .ttf file for the font
How to proceed
Thanks in Advance
Abdul

1) In the path u said user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\_WL_user\analytics_11.1.1\silp1v\war\res i couldn find analytics_11.1.1
Mine is 11g simple install, can you check if you can find analytics_11.1.1 in this path?,\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1
2)I tried the same thing in OBIEE 10g, I could find the image in header but i m unable to format the size exactly as i wantedTry to modify the height and width here: column Name<img src="http://hostname:port/analytics/res/RupeeFont.png" height="9" width="10" /> or get an image of your desired dimension from Google and paste it in the image location path.
>
>
Is there any option to add New Font Style in OBIEE by adding the .ttf file in any locationLet me try this out in my local and update the status.

New Rupee Symbol required in SAP

Similar Messages

Maybe you are looking for