New Samsung Display

I've just purchased a new samsung 19" LCD tv (LNT1954) (1440x900) to use with my mac mini. It is hooked up with the supplied DVI to VGA adapter, and from there VGA to the computer. I had an acer (1440x900) resolution (hooked up identically) and it worked fine, but now on my samsung, there is a black bar at the top and left side of my screen. Apart from being shifted down and to right, the screen seems to be (fairly close to) proportionate. In my display settings, the highest resolution available to choose is 1376x768 (resolution of most samsung tvs), so my mini won't allow me to choose a 1440x900 format. My mini is recognizing that it's a samsung because there is an option for samsung's preset colours in my colour menu. I'm wondering if possibly samsung has a default setting of 1376x768 that is uses for its other tvs that hasn't been reconciled for the 19" model.
Is there a way to force my mini to go to a 1440x900 resolution, or is it the tv not allowing my to input anything more than 1376x768?
Thanks
Mac mini Mac OS X (10.4.9)

Your Samsung is a TV, not a monitor. Page 34 of the user manual says the highest supported resolution in PC mode is 1360 x 768. Lame. Return it and get your money back if you need a computer monitor.

Similar Messages

I just bought a new samsung 22" monitor and after talking to them found out it needs higher resolution then displayed in my settings,text resolution is bad. do I take back or can this be fixed?

I just bought a new Samsung 22" monitor. The text resolution is really bad. After talking to Samsung, I found that the needed resolution is higher then what my Mini-Mac shows available. Can this be fixed or do I return the monitor?

Let's try again...
my cable goes from the "Thunderball" port on my mini with an adaptor to convert it to the regular cable
You mean the Thunderbolt port.
What Mac mini do you have? Apple menu > About This Mac.
What Samsung monitor do you have?
What cables are you using?
Have you tried holding Option and click the Scaled resolutions button in System prefs > Displays?

Displays in System Preferences blank with new Samsung LCD

On my G4, which has an ATI Rage Pro 16 MB AGP card and an ATI Rage PCI card installed, I now get a blank displays control panel since connecting a new Samsung SyncMaster 730b monitor to either card. The second monitor is a Gateway EV700. If I disconnect one monitor, I get the displays panel back, as soon as I reconnect and restart, it is blank again. I obviously cannot rearrange monitors, although I can change resolutions in my displays icon in the menu bar.
I purchased the AGP card and installed it after installing OS 10.3.9, although when I had an old Apple 720 monitor connected the displays panel worked fine. I have tried connecting the Samsung with both a DVI and a VGA cable (has both options) and nothing works to fix the problem.
Short of re-installing the OS, does anyone know a fix?
G4 500 MHz (AGP graphics) Mac OS X (10.3.9)

Thanks Grant.
I tried this as well, still no luck though, I still get a blank panel.
I took a chance and put the ATI Displays software on the machine, and still the displays panel is blank. The ATI cards still see the monitors and identify them correctly in the ATI control panel installed in system prefs.
At this point I think I just have to live with it, or try installing Tiger, which I have been contemplating. I am a little hesitant though as Tiger hogs a bit more ram and is a larger installation; plus the G4 is an old machine and other than this problem runs everything very well.
eMac 700, G4 500 MHz (AGP graphics), 2 Beige G3's, Blue & White G3 Mac OS X (10.3.9)

MBP & New Samsung LED display resolution questions

Hi all -
Just got a new Samsung XL2370 LED display. I've got it hooked up to my new MBP: minidisplay to HDMI. I've got the Samsung at it's highest resolution: 1600x900. The MBP has the hi-res display at 1680x1050. The picture on the Samsung is not as sharp as the MBP, is that because of the unequalness of the resolutions? Would using a minidisplay to DVI look any different? I was thinking not since both HDMI and DVI are digital signals, but I thought I'd ask. The only monitor that seems to look identical to the MBP resolution is Apple's cinema displays, but I didn't want to spend that much on the external monitor.
Thanks in advance!

The problem is in your choice of using the HDMI connection. Use a VGA connection and you will be able to get the monitor's full resolution. Caution: I've had two cheap VGA adapters go out, but the Apple one (mini-display to VGA) does fine. I use a Samsung 2333HD monitor with my MBP (mid-2010). If I connect to the monitor with an HDMI connection (using a mini-display to HDMI adapter), the highest res on the monitor is 1600 x 900 instead of the monitor's full 1920 x 1080 I get with a VGA connection. By the way, the "Moshi" adapter (mini-display to HDMI) Apple sells does not solve the resolution problem--with it the monitor still gives only 1600 x 900, though it does carry audio. I think the problem is on the Apple side, since Apple has SnycMaster (which is for Samsung) settings in its Display prefs, but in the settings pane's resolution choices the list just tops out at 1600 x 900 when the connection is HDMI.

Connecting my Macboook late (2008) to my new samsung LCD TV

So I have a aluminum unibody macbook late (2008) and Im trying to connect it to my new samsung TV. I purchased the hdmi cords along with the hdmi adapter to plug into my macbook. I can get the display to show on the TV, but the sound is missing from the hdmi port. I also tried using an RCA cord for the audio, but the sound only works on the tv if i dont switch the source to hdmia and just leave it on TV. It's as if the hdmi and the audio are kept separate. Does anyone know how I could get it working?

When you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

New Samsung 206BW Monitor for MBP SR

Earlier today I purchase a new Samsung 206BW from Circuit City and I can't believe my eyes..
I did have to change the display profile from the SyncMaster to the Adobe RGB (1998) to get better color depth...but man this thing is amazingly bright.
I heard some noise about insuring to get the 206BW model with the "S" at the end of somewhere.......For anyone that has this monitor where is the "S" suppose to be?
Model Code: LS20MEWSFV/XAA
Type No: GH20WS.
Regards

Anyone

How to get samsung display

i first had samsung display,ants got into the display.Got the screen replaced but they gave me lg. So talked to customer care got it replaced again but they gave me new lg screen. Both the lg panels have yellow tint and very low brightness. How do i get a samsung panel. Macbook pro late 2013.

As the TV has HDMI and VGA your choices are to either:
Buy the MiniDVI to VGA adaptor from Apple (plus a VGA cable) or,
Buy a DVI to HDMI connector (link).
Although HDMI can handle sound as neither DVI, MiniDVI nor VGA do you'll need to connect the sound separately. Simply connect the sound out on the iMac to the input on the TV.
mrtotes

How can I put my old Macbook Pro early 2010 audio on my new Samsung HDTV?

I bought a Macbook Pro in March 2010 that does not support HDMI audio. So, when I am plugging my Macbook Pro on my new Samsung Series 5 5500 HDTV with a HDMI cable that supports audio, I am getting the image, but no audio. When I go to System Preferences there is no choice of Samsung TV as audio output, which makes sense since my Macbook Pro is too old (only mid-2010 Macbook Pro supports HDMI audio).
I then bought a 3.5mm to RCA cable and linked my computer via the headphone jack to the only composite audio plug I have at the back of my TV (see the picture below). I was expecting this setting to work perfectly fine but actually I am not getting any sound from my TV.
I know that some people are using a cable with two 3.5 mm male ends to connect the Macbook Pro to the TV, but my TV does not have any input for a 3.5mm cable (which is strange since the TV is quite new).
Is the only solution to get audio from my Macbook Pro on my HDTV would be to buy a new Macbook Pro or there is another alternative?
Thanks a lot for any hint!

Hi B,
It looks like you'd have to run component video in order to use the RCA inputs that go with the component inputs. Notice there is no separate audio input with the HDMI port.
A work-around would be to run the RCA audio to a receiver/amp and through its speakers. Still another way would be if you had a receiver/amp which allowed you to combine RCA audio with HDMI video, then you could run the HDMI, now carrying both audio and video, to your TV's HDMI input.

Connecting Macbook to new Samsung LCD

Apologies if its been asked before but I cant figure out the technical mumbo jumbo
I have a C2D Macbook with Leopard and now want to connect it to my new Samsung 26 LCD to watch videos which have been stored on my mac.
I know I have to buy a chord for that (which one) but will the picture quality be okay? The Samsung model is LA26A450C1 and it has a resolution of 1366 x 768. Do I have to plug it in AV or HDMI and is my LCD compatible with the macbook?
Again, sorry for such a basic question.
Message was edited by: Tanya Palta

You have three optional adapters to get the video signal out of the MacBook through the built-in mini-DVI port:
mini-DVI to DVI, chained with an additional DVI to HDMI adapter/cable, for the best digital signal. (recommended option)
mini-DVI to VGA, for an analog signal with a VGA/Dsub15 computer monitor cable.
mini-DVI to Video (either S-Video or Composite) for an analog signal, usually for PAL or NTSC equipment.
you will also need to run an audio cable from the little headphone jack on the MacBook to a AUX line-input on your stereo or TV.

I am going to buy myself a MacBook Pro in the near future and was wondering if the new Retina Display model would be worth the extra cash. I will mostly be doing photo/video/music editing.

I am going to buy myself a MacBook Pro in the near future and was wondering if the new Retina Display model would be worth the extra cash. I will mostly be doing photo/video/music editing.

if you're not in a big rush - why not hold off until Adobe and Microsoft releases an update to support the Retina Screen.
Don't get me wrong - the Macbook Retina is a good and videos look great - but when it comes to Photoshop, it's a little blurry and the fonts in Excel and Word is pretty blurry too.....I own one....
In any event, if it's something you can live with - then by all means - go for it.....
Otherwise - get the non Retina Macbook Pro - it's cheaper, and it's user upgradeable in both RAM and Hard Drive.
Good luck.

Can i use itunes with my new Samsung tablet. i have an ipod mini (i know its old!) and we got rid of our computer in favour for the tablet but now i don't know how to download more songs!!??

How can i connect my ipod mini to my new Samsung tablet?

No, there is not iTunes for Android. Actually, even if you had an iPad, there would be no way to sync an old iPod with it. You need a computer (either a Mac or Windows PC) running iTunes to sync an iPod mini.

What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
How much trade-in value can I get from VZW or BestBuy or Amazon?
Thanks!

http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
DROID Bionic: (9/8 launch) – You already know everything about this device, don’t you?
Samsung Stratosphere: (9/8 launch) – 4G LTE device running Android 2.3
HTC Vigor: (10/6 launch) – Will replace the HTC Thunderbolt
LG Revolution 2: (10/20 launch) – Will replace the original Revolution
Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
Samsung Illusion: (9/29 launch) – 3G smartphone running Android 2.3
Samsung Plato: (January launch) – whatever it is, it was pushed to 2012
HTC Bliss: (9/29 launch) – Lower end Android 2.3 device; the chick phone?
Motorola XOOM 4G LTE: (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

HT1498 I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

Hi i want to upload my music from my i-phone to i-tunes so i can then transfer to my new samsung phone. However my i-tunes is linked to another computer which i no longer have. PLEASE HELP!!!

Hi i want to upload my music from my i-phone to i-tunes so i can then transfer to my new samsung phone. However my i-tunes is linked to another computer which i no longer have. PLEASE HELP!!!

The iphone is not a storage/backup device. The sync is one way - computer to iphone. The only exception is itunes purchases. File>Devices>Transfer Purchases

I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each. Now again I'm getting that same $38 charge. I can

I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each. Now again I'm getting that same $38 charge. I can't believe that the monthly CT tax is higher than the payment for the phone itself. Does this make sense. Last time I spoke with them on the phone it was for 1 1/4 hours for something simple. I don't want to call unless I need to. The salesman told me nothing about any of this. Thank you for any help you can offer.

The bill from last month states:
CT state sales tax** $38.10
** In some states sales tax or surcharges are calculated on the full cost of the full retail price or VZW cost of the device you purchased and not on the discounted price you pay. The sales tax or surcharges charged on your device was based on $599.99 and appears on this first bill.
The current bill says the same.
Actually, now I'm realizing that last month's bill stated I was making the first payment toward the phone. Now this month also says it's the first payment toward the phone when it's really the second.

New Samsung Display

Similar Messages

Maybe you are looking for