New samsung external dvd burner taking forever to rip a dvd on macbook pro. Please help.

Hello...the superdrive in my macbook pro died recently so I purchased an inexpensive Samsung SE-208DB/TSBS external dvd burner (with USB). It has been burning so far now about 14 hours and still on 55%encoding. I have 45 GB available on system and no other programs running at the same time. Not sure if it's something with the burner itself or with my mac. help please and thank you.

No, just a single USB, which, after reading some online comments elsewhere makes me wonder if it was a power-type problem with my mac. I think I'll have to return the drive..
thank you for the help...

Similar Messages

  • HT1338 i lost my dvd and i want to install mac os on my macbook pro please help

    i lost my dvd and one of my friends install a strange os can't update or install some apps please i want to install my mac os on my macbook pro please help ?

    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

  • I cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    i cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    The Hardware Test detected a RAM problem.  Take out the chips and make certain that the connections are clean and reinstall them.  Make certain that they are well seated. 
    If the problem occurs again, test with one chip at a time.  Also swap bays if necessary.
    Please indicate if you have installed new RAM and if so what brand and the specifications.
    Ciao.
    Message was edited by: OGELTHORPE

  • Unsuccessful data transfer onto my new macbook pro- please help

    I have just upgraded to a new 2.16GHz core 2 duo macbook pro and tried last night to transfer my data via firewire using the apple start up set up from my previous 1.83GHz core duo macbook pro bought in March 2006. Unfortunately there were errors in transferring my user folder. I subsequently used migration assistant with the old macbook pro in target disc mode and the same error occurred. I have now manually transferred my user folders by dragging them from the target disc old macbook pro drive into my new user folders in the HD of the new macbook pro. Please can anyone advise me whether this is all I need to do to have my user files on the new macbook pro ie are there any other files I should move over from the old to new computer? The applications transferred in the initial set up and several folders in my HD and it seems only the user folders didn't.
    Can someone explain why this happened also please? I have checked the new HD with disc utility and it has no errors.
    I have transferred files from several powerbooks in the past using the initial set up or migration assistant and haven't had problems like this before? I wonder whether the new computer is faulty? Please can anyone advise? Thanks

    Welcome to the Apple Support Communities
    You can only sync the iPhone with one Mac or PC, so your Mac is asking you to erase the device because you synced it with another Mac or PC. To avoid this, I recommend you to copy the "iTunes" folder of your old Mac or PC (in Music folder) to the Music folder of your Mac, so you'll have the same data on your Mac as the data you had on the PC.
    To transfer contacts, notes, etc., I recommend iCloud > http://www.apple.com/icloud/setup/

  • Connection timeout error keeps on occurring on my new Macbook Pro, please help?

    I recently bought my Macbook Pro and the software version is OS X 10.8.2. I keep on having "Connection time out error" and I can't use the internet, while my old laptop and iPhone can use it without a problem. This keeps on occurring and I am new to this software, I have searched the internet but the solutions did not solve the problem. I restarted my macbook and still the same thing. I have tried the "Diagnostics" and "Assistant" in network preference but it would keep on rejecting the Wi-Fi's password even though it is correct. I'm trying so hard not to dislike my new laptop and Apple products, I pretty much trust them but this continuous problem is letting me down .

    Yes the internal drive can be removed and a IDE/SATA to USB adapter used, provided the drive still works mechanially.
    If the files are erased, it might be possible to recover using Data Rescue
    https://discussions.apple.com/docs/DOC-3172
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
    I'm not sure about the iPhone, I think you need to have the same named user account on the new machine + be authorized/logged into your itunes account. but double check that over in the iPhone forum.

  • I can't transfer Macbook applications and files to new macbook pro - Please help!

    I have treated myself to a Macbook pro. I have had a macbook from 2008 it has Lion on it. I can't transfer all my information and applications from the old one to the new one...I have logic Pro 9 and Final Cut express, which I bought from apple but haven't got the disks anymore after a fire. What can I do? Tried the ethernet connection and the firewire thing...it's not seeing the old machine. Please help!

    I tried to use the migration assistant and had the old Macbook in Target mode but there was no reaction at all. It didn't recognise that there was anything attached. Tried time machine but it won't recognise that there is old backups at all - just starts it as a new time machine.

  • My Iomega external HDD can no longer be read by my Macbook Pro *Please Help*

    The day before my problem began my external was working fine then the next day I plugged it into my mac and now it can't be read. I get a message that says it can't be read with the options to eject, ignore, and initialize. When I click initialize it sends me to disk utility where I see the HDD but it doesn't say Iomega like it usually does instead it says External Raid Media. To make things worse it says it's not partitioned. I can't even verify or repair disk because the options are greyed out. I tried restarting, opening it up to see if it was a physical problem. I don't know what to do any assistance will be appreciated.

    Do a reset.. power off the TC..
    Hold in reset and power on.. keep holding in reset until it flashes rapidly.. if it turns on at all.
    If you bought it in June.. take it back today.. it is broken.. at a guess.
    Some Gen4 are failing this way.. get Apple to replace it.. even if it is a few days out of warranty it won't be much.

  • Does the New Imac 21 works as an external display using thunderbolt to thunderbolt cable plugged into a MacBook Pro?

    Does the New Imac 21" works as an external display using thunderbolt to thunderbolt cable plugged into a MacBook Pro?

    Hi there LDIMERY,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    -Griff W. 

  • What is the best way to manage my iPhoto, which is taking up too much space on my MacBook Pro?

    What is the best way to manage my iPhoto, which is taking up too much space on my MacBook Pro?
    Specifically, I'd like to keep some of my favorite pictures on the laptop while moving the rest to an external hard drive. Is there a way to tag just a few pictures inside an event/album as "favorite", while storing the rest in an EHD, but still keep them connected to the same event/album? I'd like to have just the favorite pictures on the laptop, but when I have the EHD connected,  be able to view all my pictures in the same place, and not have to browse through separate hard drives. Ideally, whether or not a picture is designated as "favorite" will determine where it resides.
    Is this at all possible?
    I have only 7 GB left on my HD and I'm desperately needing a solution!
    Thanks!

    You need two libraries to do this. One on the external with all your Photos. One on the internal with a subset - your favourites. You do it this way to make backing up easier - that is, back up the library with everything, so you're only backing up one.
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    Now you have two full versions of the Library.
    3. On the Internal library, trash the Events/albums/photos you don't want there
    Now you have a full copy of the Library on the External and a smaller subset on the Internal
    Some Notes:
    As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
    You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    You can keep the Library on the external updated with new imports using iPhoto Library Manager

  • Easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

    easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

    Those are the options - more space is more space.
    Moving the iPhoto Library is simple:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How to convert VCR Tape to DVD on MACbook Pro?

    Any insight into how to convert VCR tapes to DVD on Macbook Pro would be much appreciated!

    The first question is:  how to get video into your Mac? 
    My answer is:  use a DV camcorder as a translator.  Most Canons and Sonys do this.  Here are some general steps:
    1.  connect the video and audio outputs of your VCR to the input jacks of the camcorder.  (If the video is on an S-video jack instead of the conventional yellow phono jack, it will be a little bit better quality.) 
    2.  Using your camcorder's menu, set it to "AV IN->DV OUT".  This will vary according to the model of your DVCAM.  One hint:  all camcorders have a 3-position camera/off/play(vcr) switch.  In this application, most of them use the PLAY position. 
    3.  Connect the DV out of the camcorder to a firewire port on the Mac.  This requires the cable that comes with the camera...it's a mini-firewire on one end, and a regular firewire 400 on the other.  (If your Mac has only a FW 800 jack, you may need another adapter.) 
    4.  Turn on the DVCAM.  Usually, iMovie will automatically open and be ready to record...if not, start it. 
    5.  Hit PLAY on the VHS machine.  You should see the video in the iMovie window.  When you see what you want to save, press iMovie's button to start recording.  You're free to edit the movie in any way you want. 
    When you have enough for a DVD, save it and use iDVD to burn a disc. 
    Alternatively, if you want to save a step, you can skip the iMovie step and just open up iDVD and select the feature...I forget the exact name...but it's like "Quick Movie" that will just save it as one stream. 

  • I've buy a new Air Book for may self :-) and I want to offer my Macbook pro to my sun. I really want to know what should I do to clean all my information in the my old computer?

    I've buy a new Air Book for may self :-) and I want to offer my Macbook pro to my sun. I really want to know what should I do to clean all my information in the my old computer?

    Backup your data off the machine to a external drive (not TimeMachine) and disconnect.
    Create another Admin account in System Preferences and log into it, delete your Admin Account and reboot.
    Optional: Open Disk Utility and Erase Free Space (Zero good enough, 7x for military level, both take time)
    This should be good enough to remove just your account and data without the hassle of reinstalling the OS and all new programs again.
    However if you need that level, then c boot off the 10.6 disk (or command r boot on Lion) and use Disk Utility there to Zero or 7x erase the OSX drive/partition, quit and reinstall OS X. Much more work that likely is unnecessary in your case.
    Good Luck.

  • My WD external hard drive will no longer show up on my Macbook pro.

    My WD external hard drive will not longer show up on my macbook pro.  The light turns on and you can hear it running but it won't show up either in finder or in the disk utility.  This happened a while ago but I really want to get all my photos off the hard drive.  Is there anything I can do to get my computer to read it again or get my data off of it?
    I don't have access to another Mac to test it. 
    Thank you

    dead sata bridge card. very common problem.
    see all about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    verify HD on another Mac however, if same, dead SATA card most likely

  • My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    You need to get some software that allows your Mac to read and write to the NTFS disk.  There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free.  I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac.  You don't need NTFS anymore, unless you still have a Windows computer that needs it.

  • I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

    I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

    I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
    OSX 10.10.3
    Best.

Maybe you are looking for