New sap xi

hi all,
I am new to SAPXI . i need some material regarding XI.
Help me in this regard.

Hi Deepak,
First i would like to welcome to the fascinating world of XI. If it’s just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once you’re done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
Now lets see the installation of SAP XI,
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
• Installation Master DVD
• Installation Export
• Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
• SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
XI installation
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
In simple words regarding learning XI, there is an abundance of information on SDN and help.sap.com…. So I think it will be better for you to search information there rather than me just providing you links….which will just go on and on and on….so I felt it is better for you to go and search so that not only you get information on SAP XI but also explore SDN in its real sense.
Regards,
Abhy

Similar Messages

  • CUP - Issue regarding creation of New SAP ID in CUP.

    System :  SAP GRC 5.3 SP 12..
    We have requirement where in we need to design a workflow for creation of New SAP ID.
    The Naming convention followed for SAP ID is FIRST LETTER of FIRST NAME and LAST NAME with maximum 8 characters.
    For Eg
    JOHN SMITH would have SAP ID as JSMITH
    JERRY SMITH would  have SAP ID as  JSMITH01
    The requirement here is when user fill the REQUEST FORM for NEW User ID there is field where in the requestor need to put the desired SAP ID,
    Can a validation be set OR Logic be written so that user can put the SAP ID as per the naming convention..?
    Also , any other solution as to how the situtation can be handled in CUP...
    Regards.
    Ajit

    Hi Ajit,
    Yes, you can maintain the user ID in the Active Directory. User id will be now auto populated in the request form, from Active Directory when  we data Source is LDAP -Actice directory. So when user login to end user form to create a request, It's all information( user details + manager details ) will fetched from Active Directory.
    It is not possible to change userid in later stage of approval in the request.
    You can have security as final stage and guide them to create user manually as per naming convention.
    Make auto provisioning OFF in CUP
    Kind Regards,
    Srinivasan

  • What is the new sap note for Ptax slabs of FY 2011-12.

    Dear Experts,
                       we are currently using  ECC  6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
    what is the new sap note for Ptax slabs of FY 2011-12.

    Hi,
    The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
    Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
    Regards,
    Nishtha

  • New sap user creation

    Hi All SAP experts,
    My company has implemented 2 Systems SAP Landscape with one development and one production server which are running on R/3 Enterprise 4.7 (Kernel Release 6.20) with Microsoft SQL 2000 as database server.
    I have the following questions regarding new sap user creation by using user copy function.
    1.When I request to create new SAP User by using user copy function ,should I just create the user acct in DEV and transport it to PROD System? If yes, how could I do that?
    2.When I request to create new SAP User by using user copy function, can I just create it on PROD System only? If yes, what is the impact?
    3.When using User copy function to create new user acct, should I select all parts (like adress ,defaults,reference user, user groups.....) of the existing user to be cloned to new user acct?
    Thanks.
    Leon

    Hi Leon,
    Answer to your questions in their respective order:
    1. You can create user in DEV and then make remote client copy to PRD system using scc9 t-code. Here you can choose user accounts and authorizations for the copy. ( Rem: Data will be overwritten in target system when copied).
    You can also use client export/import(scc8/scc7)
    But, When you do the client import from the exported files using STMS,you will have to select only one of the transport requests and then STMS automatically selects the other requests for you.
    Then it will show you the different transport requests that you have created during your export, the client copy profile and the target system and client. The customizing and application data is deleted in the target client before copying for all profiles except SAP_USER. This is technically unavoidable (and hence the data will be overwritten).
    So if you can afford overwritting of user data in target client , you can go with the above procedure.
    2. Using  user copy in su01, you can copy one user to another user only in that client and is confined to that system only. So yes, If you want 2 or more users to have same authorizations, profiles ,etc etc.. you can choose this in PROD system.
    3. It depends.. If you want user to be in same group, then you can choose user groups. If you want them to have same authorizations , you can choose roles and profiles... If you want them to have same company address and others,... you can select address.. and so on.
    Also below link provides required steps in case you choose local/ remote client copy:
    http://www.sap-basis-abap.com/bc/client-copy-by-using-scc8-and-scc7.htm
    Hope this helps...
    Thanks,
    Ajith
    Edited by: Ajith Kamath on Oct 20, 2009 8:28 AM

  • Transfer GL Accounts to a new SAP System

    I need to transfer G/L accounts to a new SAP system.
    I am trying to use Data Transfer Workbench. I need to know do we create it in the Company Code from where I have to move the GL master data or in the target system.
    One more question, after Extract GL Master Data file is generated-the next step is to create the spreadsheet file. I am not able to find where we do it.
    All help is appreciated.

    I am using the tcode SXDA. The next step as explained in the SAP R/3 documentation is Processing a file with spreadsheets. It done as follows:
    Import the file using a spreadsheet program and set the columns to the data format Text.
    Edit the file using the spreadsheet. You can enter your data manually or copy it from another spreadsheet file.
    When you have finished editing the file, save it with the extension "txt".
    But I am not able to figure out how to do that. If anyone knows, please explain little bit in more detail like how can I import the file using a spreadsheet program.

  • Generate a new SAP mode maximized and active working with Excel or Word

    Hello!
    We have an event that it generates a new SAP mode in the desktop. This mode is generated ok (maximized and active) if the user is working in other SAP mode in this moment.
    But this mode is generated minimized if the user is working with a Word or Excel Microsoft document in this moment.
    We need to generate this new mode: ACTIVE and MAXIMIZED when the user is working wiht any non SAP tool in that moment. Is this possible??
    We have checked the following functions module with  failed results:
    NAVIGATION_EXECUTE_OBJECT
    ECATT_START_GUI_REMOTE
    TH_CREATE_MODE
    Thanks in advance!!
    Regards,
    Message was edited by:
            Elisa Villellas

    Could you try disabling graphics hardware acceleration? (I'm having trouble determining from your "More system information" whether it's enabled or disabled.) Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    orange Firefox button ''or'' classic Tools menu > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    If you restart Firefox, is the issue resolved?

  • Starting new SAP LUW inside ABAP method

    I am calling a ABAP method and in that I want to start a new SAP LUW and do commit when leaving the method.
    The requirement is that all update function modules called inside the method should only be committed and no other prior update FMu2019s(before calling the method) should not be committed.
    Any idea if itu2019s possible to do that in ABAP OO and how do we do it.
    Thanks & Regards,
    Anand.

    HI ,
    Thanks for the quick replies. I tried using SET UPDATE TASK LOCAL but it was also committing all the prior update FM's before calling this method.
    I also tried using the RFM -    CALL FUNCTION 'ABC' IN BACKGROUND TASK   DESTINATION 'NONE' . and then
    COMMIT WORK AND WAIT.
    Now when i do commit work it commits all the previous update tasks also.
    And if i do not call COMMIT WORK right after the call to RFM, then the object that i am trying to create inside the RFM will not be committed.And then if i proceede some validations will fail as the objects were not created.
    Is there a way to commit immediately when the RFM is called without commiting the calling transaction from where this RFM is called.
    Any examples would be highly appreciated ..
    Regards,
    Anand.
    Edited by: Anand Ajitsaria on Feb 4, 2011 9:54 AM

  • Transaction iView(from remote source) does not open a new SAP session

    Hi All,
    We are on portal 7.4 and are calling a transaction from ECC system. Within the transaction we have a button which displays graphs based on the output of the transaction. Since we are calling this transaction from portal, a new session does not open after clicking on this button.
    In order to enable a new session, I have changed the configuration for 'disable new session buttons in SAP GUI' to false yet the new SAP session does not open. I have also verified the webgui setting and ensured that we do not have '~singletransaction' maintained,  yet we are unable to enable the new session. Could you kindly suggest on how I can get this button to function?
    Additional inputs:
    - Referred to note 125814 for changing the new sessions value.
    - Tried changing the iview type to 'SAP GUI for window' from SAP HTML type(which was default).
    - In case I type '/o' in the command box for SAP, it gives me a 'maximum sessions reached' message, but this message does not come when I click on this button. In fact, nothing happens after I click on the button.
    I still think there might be a possibility to enable this, however, I seek your inputs on this.
    Awaiting response...
    Warm Regards,
    Vinay

    Hi Harini,
    thanks for your answer!
    I can tell you that the same command used from the SAP Client open a new session with the same transaction...
    Is strange that from the portal it has a different behaviour...
    Best Regards

  • Upgrade from EDGE 3.0 -- EDGE 3.1: What to do with the new SAP transports?

    Hello together,
    we upgraded our EDGE 3.0 System to EDGE 3.1.
    Also we upgraded the SAP integration kit.
    Everything seems to work fine.
    With the EDGE 3.1 Integration pack there are also new SAP transports included.
    Now there are a few questions. Hope someone can help me with this
    Do we have to import them?
    Can we still use the "old" transports already imported in SAP?
    Can we just "override" the "old" transports?
    Is there an performance improvement (especially with WebI) with the new transports?
    Thanks very much in advance!
    With kind regards
    Sebastian

    Ingo,
    If I do a fresh install of BOXI 3.1 Edge SP2...do I have to import the original transports or can I go directly to the SP2 "version" of the transports?
    Thanks.
    Kevin

  • How to copy the bookmarks which are created in SAP BW 7.3 to New SAP BW on Hana System?

    Hi,
    We have requirement of moving the Bookmarks from SAP BW 7.3 system to New  SAP BW on Hana System.
    Please let me know if it is possible?  If possible  how to do it.?
    Thanks,
    tms

    Hi TMS,
          Are you talking about Web template bookmark or QueryDesigner bookmark?
    If yes then in both the cases its is stored in your client machine as a browser favourite.This has nothing to do with HANA or BW system.So you can transfer browser favourite file from one system to other.
    If you are talking about in anyother context please be precise and more elaborate .
    Thanks & Regards
      A.Dinesh

  • ERROR: The new SAP tools in /usr/sap/DEV/EHPI/abap/exe cannot connect

    Hi All.
    I am attempting to upgrade my ECC 6.0 EPH3 system to EPH4.(System 'i' V6R1M1) I am hitting an error  on phase PREP_INIT/CHECKPROF_INI which states 'ERROR: The new SAP tools in /usr/sap/DEV/EHPI/abap/exe cannot connect to your database.' The log file /usr/sap/DEV/EHPI/abap/log/DBCONNCHK.LOG contains more details about the failure.
    At this point I see the processes has created to additional kernel libraries: SAPDEV70UP and SAPDEV70U2
    I am logged on as DEVOFR per the documentation. DEVOFR is the owner of all objects in /usr/sap/DEV/EPHI.
    Here is the error from DBCONNCHK.LOG :
    4 ETW000  [dev trc     ,00000]  R3INLPGM: RmtExeLib is SAPDEV70UP                                      32507  1.917692
    4 ETW000  [dbsldb4d    ,00000]  *** ERROR => CPFB755 occured: Program DBSLENCWT in library SAPDEV70UP not found.
    4 ETW000                                                                                52633  1.970325
    4 ETW000  [dev trc     ,00000]  DBSLENCWT: rc=9998, msg=                                                  33  1.970358
    4 ETW000  [dev trc     ,00000]  Wed Sep 29 09:55:53 2010                                              154488  2.124846
    4 ETW000  [dbsldb4d    ,00000]  *** ERROR => CPF0006 occured: Errors occurred in command.                 47  2.124893
    4 ETW000  [dbsldb4.    ,00000]  *** ERROR => Command: CALL PGM(SAPDEV70UP/CHGR3SYSLE) PARM('*ADD') :Failed
    When I display library SAPDEV70UP,  DBSLENCWT is there and R3OWNER is the owner.
    My DBSL is at the latest version for my environment.
    Has anyone seen this?
    Thanks in adnvance.
    Diana

    FYI,
    I got past this issue by upgrading the kernel first.
    Thanks,
    Diana

  • Java error-message by inst of "New SAP NetWeaver 7.01 ABAP Trial Version"

    If i try to install "New SAP NetWeaver 7.01 ABAP Trial Version" on Windows XP SP2 in 3 seconds after start I get this errormessage : Java.lang.noclassdeffounderror: run Exception in thread "main" and then is installer dawn. What is to do? Plaese help !!!

    Guys, Do you have JAVA environment set up correctly?
    Might be that classpath is not setup or referenced correctly.
    On WIN OS check out this:
    http://java.sun.com/j2se/1.3/docs/tooldocs/win32/classpath.html

  • New SAP NetWeaver 7.0 ABAP Trial Version SP12

    Hello SDN Community,
    The new SAP NetWeaver 7.0 ABAP Trial Version SP12 is available for download at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken] [original link is broken]
    <a href="ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/SAPNW7.0ABAPTrialSP12.part2.rar">ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/SAPNW7.0ABAPTrialSP12.part2.rar</a>
    The same procedure applies as in earlier versions, download both archives, place it into the same folder and <b>extract ...part1.rar only</b>.
    Enjoy,
    Klaus

    Hello Yann Szwec,
    I am using up to now Windows XP Home Edition. After some problems during installation I have read again the "recommendations" for using the SAP NetWeaver 7.0 ABAP Trial Version SP12. Furthermore I searched here in SDN for solutions which might be available regarding the problem I have.
    The important fact is that this software is released only for the following operating systems:
    Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003.
    (having a NTFS file structure etc.)
    No other release is done (taking into account Windows Vista).
    I have done an update to Microsoft Professional Edition but I have still some installation problems.
    Please refer to:
    Re: Error Install SAP Netweaver 2004s ABAP Trial version
    or
    Sap Netweaver 2004 ABAP trial version com.sap.installshield.maxdb.maxdb...
    Up to now I have no idea why after installation of Windows XP Professional I have  still the same problem.
    The problem is exactly what is described in Sap Netweaver 2004 ABAP trial version com.sap.installshield.maxdb.maxdb...
    But I have the feeling that my Windows XP Professional Installation was not correct (because there are some other problems around too)
    So my recommendation to the description for downloading would be to highlight more this important recommendation of use of the ABAP trial version
    (refer to https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6).
    For further versions which might be released in the future (hopefully) it would be nice if the support regarding Windows versions would be a little more broader (Windows XP Home etc.). But this is only a wish from my side.
    With best regards
    Christoph

  • New SAP NW AS ABAP 7.01 SP03 Unicode with standard sapinst installer (beta)

    Hello community,
    a new SAP NW AS ABAP 7.01 SP03 version with the Standard SAPINST installer (note: the "trial version" is beta!) and optimzed single user memory consumption (~2GB pagefile) is available for testing purposes.
    NOTE: The installation step "LOAD DATABASE" may take up to 8h depending on your harddisk (1h on a fast disk). Next release will install faster.
    Recommended: Use Download Manager
    Please report problems here.
    Best Regards, Oliver

    I have installed the Microsoft loopback adaptor, and I still got asked for a DNS entry.  However I've unchecked it and continued...
    After now several attempts at installing and uninstalling and trying again, I got this on the last attempt - this was after starting a new installation and choosing the 'copy to a new folder' option rather than continuing with the former installation...  (It said 'Please inform the installation development' at the end)
    Caught a known exception during service selection. Errortext: ESAPinstException: error text undefined  Message stack: Opened sylib701_1.dll exe dir is C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919 MessageLib initialized successfully. Opened C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919/jre'. exe dir is C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919/iakdblib701_1.dll  This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 03:27:10  showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 10.10.0.10 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\x. Removing file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI Creating directory C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\log_11_Mar_2009_16_56_41. Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'rename' with parameter (C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst, C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst), line (377) in file (syxxcnode.cpp). Copying file C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst to C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst'. Account James-PC/James has ADS path 'WinNT://James-PC/James' James has SID S-1-5-21-3327962229-488744679-1681228067-1000 existence check for user James returned true. inserted account (James, S-1-5-21-3327962229-488744679-1681228067-1000, USER) into the accountcache. Security descriptor of C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst set to O:BAG:S-1-5-21-3327962229-488744679-1681228067-513D:AI(A;ID;FA;;;S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464)(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;0x1200a9;;;BU)(A;ID;FA;;;S-1-5-21-3327962229-488744679-1681228067-1006) + PROTECTED_DACL_SECURITY_INFORMATION Removing file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst. Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'DeleteFile' with parameter (C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst), line (202) in file (synxcfile.cpp). Moving file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst to: C:\sap540A.tmp. System call failed. Error 32 (The process cannot access the file because it is being used by another process. ) in execution of system call 'MoveFileEx' with parameter (C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst, C:\sap540A.tmp, MOVEFILE_WRITE_THROUGH), line (223) in file (synxcfile.cpp). Unable to delete node C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst with type file: The process cannot access the file because it is being used by another process. Removing file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\log_11_Mar_2009_16_56_41\dev_sapinst. Unable to move or rename node C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst with type file/directory to C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst: The system cannot find the file specified.  Please inform the installation development, execution will be terminated now.

  • ADS is not configured in New SAP NetWeaver 7.01 ABAP Trial Version

    Dear Colleagues,
    I have installed new SAP Neteweaver 7.01, i could not able to run the pdf forms normal as well interctive forms.
    i tried by running the test programs like fp_test_00 getting the folloing error message
    Test Program: Version Information (for Analysis Only)      
    USAGE ERROR                                                                               
    ERROR CODE    :          2                                 
    ERROR MESSAGE : ADS                                        
    Invalid HTTP connection: ADS 
    fp_test_ia_01 execution.. error invalid http connection:ads
    on execution of FP_CHECK_DESTINATION_SERVICE    : usage error:ads
    Pleae help me how to configure the ads services to run interactive forms.
    Thanks,
    Mahesh.Gattu
    Edited by: Maheshkumar gattu on Nov 27, 2008 12:02 PM

    Hi Blag,
    can you please provide me the details, from where i should get NSP Java  and procudure to Run on minisap.netweaver 7.01 abap trial version.
    please any one guide me how to configures ADS on minisap 7.01
    Thanks,
    Mahesh.gattu
    Edited by: Maheshkumar gattu on Nov 28, 2008 1:22 PM

  • Option to mass migrate function modules in a function group to new SAP box

    Hi All,
              We have a requirement wherein we have to move all the existing function modules to a new SAP box.
    I heard that there is an option to download all function modules in a function group to text files and upload them to a new system at once without much progamming.
    Please let me know if anyone knows how to do this.
    Thank you,
    Vasu

    Hi Vasu,
    why don't you just use CTS?
    Create a transport that contains the objects you want to move. Then. assuming the target system is not in the same CTS landscape, move the files to the transport directory of the target system. Then in STSM goto the Import Queue and select Extras->Other Requests-Add to add your transport to the queue. Then import it as normal.
    Cheers
    Graham Robbo

Maybe you are looking for