New "Save image" function (not the 2-button screen capture, different)

I found this while playing w/ Safari on my iPhone. I went to Flickr, saw a picture that a friend uploaded, and had my finger on it a bit too long- a dialog popped up that said "Save image" or "Cancel"- so, I hit save image, and the big (1024 x 685, 197 KB) was placed into my Camera Roll file.
Does the same thing on any website- you can open a large image, and download it, not just a small screen capture.
Makes really nice wallpaper. Sorry if this has been around awhile, I just happened to find it

This was added with 2.0 software

Similar Messages

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

Client getting an IP lease on the 64-bit LiteTouch boot image, but not the 32-bit version.

MDT 2012 U1. No problem with PXE booting so WDS is not the issue.
The NIC in question is the Intel I217-LM, which resides on both the new Dell Optiplex 9020 and the Latitude E7440. I downloaded the Dell drivers and then the Intel drivers and imported them into the WindowsPE drivers folder in the workbench. Updated
the boot images to make sure the new drivers were injected. Both yielded the same result. I can do everything I need to do when booting to the 64-bit LiteTouchPE_x64.wim boot image, but not the 32-bit version. When booting to the 32-bit
version, I get no IP configuration info at all.
When looking at the drivers in MDT, I see only one difference: the supported OS versions. The 64-bit driver supports 6.1, 6.1.1, and 6.2. The 32-bit driver supports only 6.1.1 and 6.2. Not sure if that's the issue.
Tried using drvload within 32-bit WinPE to manually inject the NIC driver. Still no luck. Ipconfig yields no configuration at all.
If I can't get these machines to boot to the 32-bit boot images, I can't deploy 32-bit images, unless there's a way of which I'm unaware.
EDIT: A little extra background. My WindowsPE folder has two subfolders called x86 and x64. Obviously, 32-bit drivers go into the x86 folder and 64-bit drivers go into the x64 folder. Then in the properties of the deployment share a
selection profile is selected which points to the architecture-specific folders.

Specifically what do you see when you are in WinPE, press the F8 button, and run ipconfig.
1. ipconfig shows no network adapters (see:
http://myitforum.com/cs2/blogs/rpedersen/clip_image002_53DA17D4.jpg ). This means you still have not loaded the correct device drivers, check the c:\windows\system32\wpeinit.log file.
2. ipconfig shows an "autoconfiguration IPv4 Address" with a netmastk of 255.255.0.0. This means that the client did not get an IP address from the DHCP server. Double check the connection between the client and the DHCP server.
3. ipconfig shows a correct address. There is no problem. :^)
Keith Garner - keithga.wordpress.com
I get the first result. Absolutely no network adapters, which I assumed indicated no appropriate device driver.
This is the result of the wpeinit.log from the machine booting to the 32-bit boot image:
Info WPEINIT is processing the unattend file [X:\unattend.xml]
Info Spent 1747ms initializing removable media before unattend search
Info ==== Initializing Display Settings ====
Info Setting display resolution 1024x768x32@60: 0x00000000
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Computer Name ====
Info Generating a random computer name
Info No computer name specified, generating a random name.
Info Renaming computer to MININT-TFRU2BT.
Info Acquired profiling mutex
Info Service winmgmt disable: 0x00000000
Info Service winmgmt stop: 0x00000000
Info Service winmgmt enable: 0x00000000
Info Released profiling mutex
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Virtual Memory Paging File ====
Info No WinPE page file setting specified
Info STATUS: SUCCESS (0x00000001)
Info ==== Initializing Optional Components ====
Info WinPE optional component 'Microsoft-WinPE-HTA' is present
Info WinPE optional component 'Microsoft-WinPE-MDAC' is present
Info WinPE optional component 'Microsoft-WinPE-WMI' is present
Info WinPE optional component 'Microsoft-WinPE-WSH' is present
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Network Access and Applying Configuration ====
Info No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.
Info Acquired profiling mutex
Info Install MS_MSCLIENT: 0x0004a020
Info Install MS_NETBIOS: 0x0004a020
Info Install MS_SMB: 0x0004a020
Info Install MS_TCPIP6: 0x0004a020
Info Install MS_TCPIP: 0x0004a020
Info Service dhcp start: 0x00000000
Info Service lmhosts start: 0x00000000
Info Service ikeext start: 0x00000000
Info Service mpssvc start: 0x00000000
Info Released profiling mutex
Info Spent 749ms installing network components
Info Spent 1669ms installing network drivers
Error QueryAdapterStatus: no adapters found.
Info Spent 0ms confirming network initialization; status 0x80004005
Info WaitForNetworkToInitialize failed; ignoring error
Info STATUS: SUCCESS (0x003d0001)
Info ==== Applying Firewall Settings ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Executing Synchronous User-Provided Commands ====
Info Parsing RunSynchronousCommand: 1 entries
Info Command 0: 0x00000000
Info Successfully executed command 'wscript.exe X:\Deploy\Scripts\LiteTouch.wsf' (exit code 0x00000000)
Info STATUS: SUCCESS (0x00000000)
Info ==== Executing Asynchronous User-Provided Commands ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Applying Shutdown Settings ====
Info No shutdown setting was specified
Info STATUS: SUCCESS (0x00000001)
At first I thought the first bolded section might be relevant, but when I booted to the x64 boot image, which works fine, I get the same message in its wpeinit.log file. The only difference between the two log files is that the x64 boot image actually
shows successful installation of a driver where the second bolded section is.

How can i add a function to the Home button?

I'm developing an app and in order to make it work, i need to add a function to the Home button when the user is in a specific screen.

I would not say "impossible", but certainly not an app that would ever be available via the iTunes App Store.

Function of the PLAY button versus the ENTER button

Hello gang,
I had a quick DVD / DVDSP related question that I've been trying to get a definitive answer for, and I've had great luck and some very helpful responses over in the Final Cut forum so I figured I'd give it a shot.
Anyways, I'm editing some video and authoring a DVD for a group who intend to make an instructional DVD. It's divided into about five chapters and each one begins with some sort of voiceover and text/graphics. In the opening segment of the DVD, there is a voiceover that explains the way to navigate through the DVD and select chapters, etc. etc. The voiceover has already been written and recorded, but I have some concerns about the power they have designated for the "Play" button. Here is an excerpt:
"We use the PLAY button in a couple of ways: to select and play an item that is currently highlighted in a list of items on the screen..."
and also:
"Almost all DVD remotes have a set of buttons that are arranged like a set of arrows (or triangles) pointing to the top, bottom, right and left of the remote control. These keys are used to move the selection pointer on menus presented on the screen. When an item is selected, it is highlighted to distinguish it from the other items in the list that are not selected. Once you have moved the selection point to the item you want, push the PLAY button to actually select and begin playback on that item."
Now here is my concern– I was under the impression that the "Enter" button was typically used to select menu items, etc. I decided to test this on some commercial DVDs I had lying around, and it seems that the Play button does in fact work to select items. I had always assumed it was assigned just one specific role, for example playing the main title on a DVD.
I looked it up in the DVDSP manual and this is all I found:
"A button is selected when the viewer navigates to
it. Only one button at a time can be in the selected state. The selected button becomes
activated when the viewer presses the remote control’s Enter button. Depending on the
button type, highlights or layers are used to indicate each button’s state."
I couldn't find anything regarding the function of the Play button. I suppose my question is this: do these instructions sound okay? Are they universal? Can the Play button be used to select menu items on EVERY DVD player? I am only really stressing about this because this DVD is being targeted towards senior citizens, many of whom have extremely limited knowledge of DVD technology. I'd like to come up with the most universal, simple, and solid instructions for navigation through the DVD.
Okay, thank you in advance. I appreciate any comments or advice you might be able to offer.
PowerBook G4 Mac OS X (10.4.7)

Ah yes, Jake, but which UOP? Surely, you've seen me address this issue of there not being a Play UOP before?
The project can be set up for Play to be Enter on a very high percentage of players, but it would be good with Christopher’s project to get the announcer to add "and Enter".
The way it works is make sure that the "Still Off" user Op in DVD Studio Pro's Advanced Playback Controls is unchecked. DVD SP started making this default UOP denial in recent versions, which will mess up the Play remote key on a lot of players, including the Apple DVD player.
And it would be good to take notes here Jake, since you do some Scenarist authoring. This Play remote key could bite you big time, if you're not careful (I've rescued two good authors who had trouble with what I'm about to describe; luckily, we caught it before it was submitted for replication).
Still Off, which is what a lot of DVD player manufacturers map their play remote key if they don't directly map it to "Enter", when the DVD player is in infinite pause mode, i.e., the state a cell/program is in when displaying a still menu, causes the menu PGC to execute it's post command area (leave the PGCs still phase).
A check of DVD SP's abstraction layer will show that navigation out of the post command area of all DVD SP's menu PGCs is determined by the current value of SPRM 8, the last selected/activated button. All of DVD SP's menu domain buttons are "LinkTail PGC" commands, so the effect of Operating Play is identical to activating a button with Enter, in the case of Still Off being the trigger.
This can be verified by setting a button command in AfterEdit to jump somewhere directly which is different location than it was set in DVD SP. With the Still Off user op enabled, hit Play on the selected button and find that the original command in DVD SP will execute. But hit enter on the same button, and navigation will go to your test location. This is how it works on many players (you can check it out right in the Apple player).
So it's good for spec based authors to use LinkTail PGC, which most do, on their menu button commands for still menus (in single PGCs), just in case users use Play instead of Enter in those players; or navigation can get pretty wacky! Or, if you don’t use LinkTail for the menus’ button commands, then it would be good to at least provide for code in the PGCs post command area to receive navigation in this case. But LinkTail has lots of other advantages, which is why it's used so much.
With motion menus, Most players map the play remote key to "Enter", well, except the Apple DVD player. It turns the Play remote key to a Pause key during motion, so Christopher’s viewers would definitely be out of luck there.
All that said, the play remote key should not be depended on as the primary for bullet-proof navigation, as you said.
Take care,
Trai

HT1386 i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

Hey renie1515,
Thanks for using Apple Support Communities.
When you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
Have a nice day,
Mario

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

HT4993 My volume down button is not working. The UP button works, but not the down button. I have tried to restart it and that didn't solve the problem.

My volume down button doesn't work on my iPhone. The UP buttown works, but not the down button. I have tried a hard reset and that didn't fix it.

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to Use an Image to Customize the Static Button Widget

Can I just get someone to help me figure out how to use an image to customize the static button widget, please?
I have tried using several different types of images, but none of them seem to actually change the appearance of the button.
Thanks!
Laura
Captivate 5.5

I tried to use the tools within the widget itself - it offers you the opportunity to use an image (see screenshot below).
I also opened it in Flash and tried to replace the images for one of the button styles there w/ my own, but in re-publishing the SWF from there I broke the widget. When I attempted to use the edited widget, there were no customization controls available after I inserted it (see screenshot two below).

Downloads Low resolution images and not the high resolution as it did in 08

'm using iPhoto '09 , unfortunately iPhoto only downloads the low res images and not the high resolution images. This makes it pretty much worthless, since the low resolution images are really bad in iPhoto. There was not any problems with Iphoto in the past Thank You

What do you mean by "downloading"? There are a couple of ways to get image file out of iPhoto:
1 - select the thumbnails and drag them to the desktop. This will give you copies of the latest version of each photo.
2 - select the thumbnails, use the File->Export->File Export menu option. Depending on how you configure the export you will get the original, the latest version and/or a reduced size copy that you determine.
3 - select thumbnails and use the Share->Send to DVD. This produces a mini library of the photos you've selected which include the original files, thumbnail files and any modified/edited file. This method is intended for use on computers that are running iPhoto.
Which method are you using?

HOW DO I put a title "on" a photo in iphoto (NOT the info button) actually literally typed on the photo?

HOW DO I LABEL A PHOTO -- WITH "TYPED INFO ON THE ACTUAL PHOTO" SO WHEN IT PRINTS IT TYPES THIS.....NOT THE "INFO" BUTTON THAT JUST SHOWS YOU A TITLE.
THANKS... MAYBE YOU CAN'T DO THIS AND ONLY IN ADOBE PHOTOSHOP ??

1 - Please fix yoour Cap Lock key - all caps is terribly hart to read and is rude - considered yelling
2 - to place text on a photo you need a photo editor - Preview can do it as can many other editors - <a href="http://web.me.com/larryhn/iPhoto_08_(version_7.x.x)_FAQ/Graphic_programs.html"> click here for links to some to consider.</a>
LN

Ipad will work when you hit home and then slide the unlock bar - then when you get to the homepage, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing. help!

Ipad will come on when you hit home and then slide the unlock bar works fine - then when you get to the home page where the icons are, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing. help!

The home button is the main button off the screen - where is the sleep button? When I hit home I only see the lock slider (its black) and a button that has a flower on it that pulls up photos we took that are on the ipad. Thanks for your help!

Custom functionality to the telephony buttons which can trigger calls

Hi everyone,
I need to add a custom functionality to the telephony buttons which can trigger calls. This will be added to the telephony buttons consult, transfer, warm transfer, dial pad, conference.
Any idea as to how to proceed with this?
Thank you in advance.
Binno Don Thomas

Hi,
The buttons are controlled by ToolBar profile in your webclinet profile.
For creation of the toolbar profile go to
SPRO >> Customer Relationship Management >> Interaction Center WebClient >> Basic Functions >> Communication Channels >> Define Toolbar Profiles
If you want to create the button itself for use in the toolbar profile you can go to
SPRO >> Customer Relationship Management >> Interaction Center WebClient >> Customer-Specific System Modifications >> Define Toolbar Buttons
Hope this Helps.
Regards,
Rajiv

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....

Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.

New "Save image" function (not the 2-button screen capture, different)

Similar Messages

Maybe you are looking for