New scenarion for serial number management.

hi all,
Currently during goods reciept serial no. are generated aotomatically.
for ex.when we takes the goods reciept of 100 sim cards.at the time of gr system automatically create 100 serial nos 1,2,3,4,----
to 100. now my client wants if we return this material to vendor(due to poor quality).the sim must be returned by using same serial no.and when we takes the substitute delivery,then same srial no. is used. as return.
pls reply me asap.
regards
sumit bisla

HI,
   It is not possible  . system can not create the serial no for return goods .
u only remember the serial nos of return goods and u only given the same serial nos at the time of receiving the same return goods from vendor.
Edited by: anjali.p on Sep 6, 2011 2:37 PM

Similar Messages

  • Inventory Tracking & Inventory Posting for Serial number managed items

    Hi,
    Plase advise me to address this issue..
    My scenarios is : - hand an item whih is serially managed, purchase 2qty and it serial number is 'S1' and 'S2', in a delivery document had selected 'S2" and physically issued 'S1', ineed to correct serial number at the time of inventory counting..kindly advise...
    thanks in advance..
    Nobin

    HI Raghu ,
    as you are setting other properties like itemcode and warehouse, u will find batchnumber and batch qunatity(after u press Lines. ) see the sample locally at ..Program Files\SAP\SAP Business One SDK\Samples\COM DI\VB.NET\04.SerialAndBatch.  , if u have )
    the sample updates the batch table in loop, whereas I used to give all the required batch quntity at once.
    U have to make it sure that the item is managed by batch ( if a field in oitm called 'ManBtchNum' is found 'Y' then only go ahead with defining batch number and batch quantity else , ur document will not simplly get posted and no error will be thrown)
    also remember that since it is goods issue, u have to have the batch existing in the database (oibt table) with the defined batch quantity.) 
    hope it helps.
    regards,
    Binita Joshi

  • Batch Split for Material which are activated with serial number management

    Hello All,
    We have requirement where we want batch split to be mandatory during goods reciept with inbound delivery  for material which are serial number managed.
    Please let me know the possible solution to achive this requirement.
    Appreciate your quick response.
    BR,
    Tushar

    I have resolved this issue by myself. Check out the link where I have briefed how to resolve the issue using bapi BAPI_OUTB_DELIVERY_CHANGE.
    BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
    Regards,
    Senthil G.

  • Why doesn't pop-up window for serial number open?

    My mother has bought the Lightroom 5 CD and is installing it but for some reason when she clicks ther installed Lr icon as told in your instruction, the serial number is not requested. The whole window with the empty boxes for serial number does not appear. I'm not sure what she has done earlier but she is saying she hasn't been able to give any serial number to her Mac (she has had earlier version in other MAc but is facing major problems with this new Mac and Lightroom, she has had trial version in this Mac). So, could the problem be that she has removed some Adobe Acrobat reader, Java, Adobe ActiveX or something and that's why the pop up window for serial number does not appear or has she managed to activate something which is blocking something or if she has already put serial number somewhere could that be blocking the process? How to change the serial number? Does Lightroom require some other sw like cloud or sth?

    Hi Sari,
    Kindly try the below mentioned steps.
    Launch Lightroom
    Click on Help.
    Click on Lightroom Registration
    Follow the on screen instruction.
    Thanks,
    Atul Saini

  • Photoshop CC keep asking for Serial Number

    Photoshop CC keep asking for Serial Number. Adobe has charged my credit card 5x since June, but my Photoshop CC still doesn't work.

    This is also happening to me.
    I've been a subscriber for the last year and a bit.
    I've moved to a new computer at home and since then I've been getting this prompt even though I'm signed in, everytime I've opened photoshop. Now the trial has expired and I'm cut off from using it.
    This is total BS.
    I've spent the last 2.5 hours going thru every adobe support doc they've posted. Nothing works. Two hour wait on the phone, 2.5 hour wait to chat (if I'm lucky and the window manages to stay open).
    Oh hey, I can see my breach notification from here too!
    You are on thin ice with me Adobe.

  • Serial Number management

    Dear All
    Where do we maintain the number ranges for the Serial No. Profile.
    Thanks!

    1.Access the activity using one of the following navigation options:
    Transaction code     OIS2
    IMG menu     Plant Maintenance & Customer Service  Master Data in Plant Maintenance & Customer Service  Technical Objects  Serial Number Management  Define Serial Number Profiles
    2.On the Change View u201CSerial number profileu201D: Overview screen, choose New Entries and make the entries
    3.Save your entries and double-click Serializing Procedures on the left part of the screen.
    4.Choose New Entries and make the following entries:´
    MMSL     Maintain goods receipt and issue doc.     03     02
    PPAU     Serial numbers in PP order     04     02
    PPRL     PP order release     04     02
    PPSF     Serial nos in repetitive manufacturing     04     02
    QMSL     Maintain inspection lot     03     02
    SDAU     Serial numbers in SD order     02     02
    SDCC     Completness check for delivery     03     02
    SDCR     Completion check IR delivery     03     02
    SDLS     Maintain delivery     02     02
    SDRE     Maintain returns delivery     03     02
    HUSL     Maintain handling unit     03     02
    4.Save your settings.

  • 「Serial Number Management」 Improvement

    As far as Serial Number Management, SAP Business One is designed so that serial number update is done after specifying the serial number by narrowing down on Purchase Order or Delivery. However if an Item has a large number of Serial Number such as more than 100, it requires huge work to a user and it causes bad efficiency on the useru2019s business process.  
    We would like to add the following functionality on SAP Business One
    1. Mfr Serial Number search (specifying a record) function on u201CSerial Number Management - Updateu201D screen
    2. Mfr Serial Number update function on u201CSerial Number Detailu201D screen
    <<Reference>>
    Refer to the following inquiries on CHANNEL PARTNER PORTAL regarding this.
    Message No.: 164313
    Date: Feb. 13, 2009
    <<Reason>>
    When the user needs to change or delete Mfr Serial Number, they have to specify the target record by watching the list on the bottom of u201CSerial Number Management - Updateu201D screen. This operation is very troublesome in the case of a large number of serial number management. The list is not good enough to specify the target, becuase these serial numbers are not used sequence number. Since the user knows the target serial number, they want to specify it directly on u201CSerial Number Detailu201D screen. But SAP Business One doesnu2019t allow it with masking the data
    <<Present specification>>
    1. The user searches appropriate bill No. on u201CSerial Number Management ? Updateu201D and specify the target Mfr Serial Number form the list showed on the bottom of the screen by watching it.
    2. The user update Mfr Serial Number directly.
    <<Correspondence completion desired date>>
    We hope that this SAP Business One modification is done by July. 27, 2009.
    One of our new customers who claims this modification is going to launch SAP Business One system on July 1st. Even if this is not finished by then, please take care of this A.S.A.P.
    <<When it is not possible to correspond>>
    In many cases, its unit transaction is more than 1,000 and the user is required frequent serial number update. It is a huge problem for the user to search the target record from the list by only their eyes it gives serious impact for their business operations. If you do not fix this, we have to customize SAP Business One. It makes the cost higher and will be loosing SAP Business One business opportunity.
    <<Business impact>>
    Quite a few customers manage a large number of serial numbers par item. The current specification of SAP Business One is a burden to usersu2019 operation. It is totally wrong from business process improvement point of view. In order to avoid this, we have to customize SAP Business One for each user but it prevents us from providing SAP Business One with reasonable price in the market.
    Edited by: Noriaki Miyazawa on Jul 3, 2009 3:50 AM

    Thanks !
    This question was in relation to sap note no 200231- Scrapping of Serial Numbers. I am not able to figure out how the user status can acheive this requirement and where I can change the user status?
    My why not putting this question by giving reference to the sap note in the initial stage was that I wanted to figure out myself first and to avoid confusion among the community memebers.
    Dear Jurgen can you help me on understanding this note. Meantime I will read the link sent by you and try to figure out and find in relation to this note how this can be done-- in whcih transaction.
    I am giving details of sap note 200231- Scrapping of serial Numbers
    Symptom
    You can post a goods receipt again for a serial number that has been scrapped before.
    Additional key words
    Movement type, 551, 553, 555, available, AVLB, system status, usage decision, inspection lot, scrapping, MB1A
    Cause and prerequisites
    Several movements of serial numbers are grouped together for status update under goods issue (PMS8).
    In addition to the reversal of a goods receipt and several consumption postings this also includes scrapping.
    Solution
    To prevent the usage of a scrapped serial number, you can use the user status logic.
    However, the user status defined for this must either be set manually or with a subsequent (background) procedure.
    If it is necessary to reverse a scrapping, you then would have to reset this user status manually again.
    Regards

  • Movement type 317 does not currently support serial number management

    Movement type 317 - support serial number management?
    We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
    u201CMovement type 317 does not currently support Serial number managementu201D
    Movement type 317 does not currently support serial number management
    Message no. IO306
    Diagnosis
    With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
    System Response
    Termination of the transaction called up.
    Is any new availability which support serial number management in warehouse movement 317?

    Is the scenario relates to Retail ??  Movement Type 317 is used for Creation of a structured material from constituent components (Retail).  Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
    thanks
    G. Lakshmipathi

  • User-Exit for Serial Number Profile / Equipment creation

    Hi ,
    In the Material Master Data , we have a serial number profile and at the time of
    Post Good Issue , the system do generate an equipment record in the Service Module .
    That is standard SAP and working very well .
    For some customers (Inter-Company) customers we do not want any Equipment record in the Service Module to be created .
    What standard SAP functionality or user-exit can we use in order to not create the Equipment record in the Service Module ?
    Regard's

    Transaction SPRO
    Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Serial Number Management --> Define Serial Number profile
    In the Serial number profile, go to Serializing procedures. The EqReq field determines whether an equipment is to be created or not. For e.g. 01 in MMSL implies that equipment will not be created during GR,
    Not sure whether this will satisfy your requirement. Will need more information for that...
    Hope this helps,
    Lakshman

  • Number range for serial Number in production order

    Hi all,
                I want to use the Serial Number in production Order ... It should be generated automatically ... when i try this system creating the serial number from 1.....i want the number to start from 2000000 , How to configure this number range ....
    Please advise me ...
    Regards,
    kumar

    Dear
    Following steps are required in Serial Number Management :
    1. OIS2 or Go to path SPRO > Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > Serial Number Management > Define Serial Number Profiles. There enter "2" in Stkck column for your serial profile.
    2.SPRO->SAP Customizing Implementation Guide->Plant Maintenance and Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories->Define Number Ranges
    3. IQ01 Create Serial Number
    4. MM02 You need to add the above created Serial Number Profile in the Material Master ion the work scheduling view .
    5. CO02 Assigning the Serial Number through Production Order,
    Also Serial Number can be created automatically by clicking on u201CCreate Serial Number Automaticallyu201D , Release the Order
    6. MB31 Do the GR for the above created Production Order and Check in MMBE for serial Numbers
    Try and check
    Regards
    JH
    Edited by: Jiaul Haque on Nov 22, 2010 7:43 AM

  • IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA

    Hello All,
    We use batch management for serialized materials only at our central plant. For all other plants, there is no batch control. Sometimes we need to return materials back to the central plant but with a different batch number.
    When we do two step stock transfer 303 / 305, we receive the following error message if we don't use the original batch number.
    "IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA".
    However, when we use one step plant to plant stock transfer 301, there is no error message. The batch number is also updated correctly in IQ02.
    I wonder if there is any configuration to use 303 / 305 with different batch numbers.
    Thanks,
    Hakan

    Thanks Arminda.
    64044 recommends to use 309 to change the batch, which works but this is an additional step.
    Currently 1 step plant to plant transfer i.e. 301 doesn't require this additional step. It updates the batch information with no problem.
    Is there any configuration option to change the behavior of 305, so that we don't have to do an additional movement?

  • Cc lightroom trouble asking for serial number

    I purchased the cc photography package. I was able to download and open Photoshop but unable to open lightroom. It ask for a serial number. I tried the trouble shooting tips still having trouble.

    Hi Kirstygem,
    If the above mentioned steps have not helped , can you please try the below mentioned article. Although its for LR3 but its still effective for the newer version .
    Lightroom 3 asks for serial number launching in non-admin account
    Updated kb For LR5 : Preference and other file locations in Lightroom 5
    Do let us know if this worked for you or not .
    Cheers,
    Kartikay Sharma

  • Serial Number Management-doubt

    Hi,
    We are implementing SAP for trading products. We have a scenario that a material has 2 or 3 unique serial numbers.
    We are planning to go for serial no. management.
    How can the serial number management can be extended to the scenario.
    Can we used batch management and serial number management.
    Please suggest.
    Regards,
    Krishna

    Krishna
    Your requirement is not completely clear.
    I am guessing you are saying that a specific object can have 3 serial numbers, example, you are a trading company dealing with Television sets, so you will a serial number to identify a particular piece, at the same time it will have another Serial number ID from the Manufacturer ( say Samsung) and one more assigned by the Main Distributor and so on. Is that the case?
    Or are you talking about A TV having a Serial number and the Cathode Ray Tube (CRT- I know it is obsolete technology- but just an example) within the TV has another Serial Number and so on.
    Please clarify.
    In any case I don't think you can have more than one Serial number assigned to a unique piece part. But you could use some fields within Serial Number master data- General tab- e.g. ManufSerialNo. and Inventory no to capture the 'other' serial numbers, but they will be just fields for information.
    For the second case you may build a structure like an Ibase and have a hierarchy of Equipment; like TV with CRT, Tuner under it for example.
    You can also use batch but batch is like a lot and signifies a set of products and not just one (usually).
    Provide more info and you will have ideas coming from everyone.

  • Keeps asking for serial number since upgrading

    Just took the plunge and despite some dodgy reviews, I upgraded elements via a disc install. Now each time I open it, it asks for serial number and assumes I am still on trial. This despite my account showing it is registered. Also it has up graded and not brought any plug ins with it to the newer versions.
    Think I will just stick to Lightroom completely and write this version off.
    Any advice on sorting this buggy upgrade out?

    Try Shikha's solution from this thread:
    Elements 12 - not working

  • Error during GR posting. "Serial Number management only allows whole number

    Dear Gurus,
    Need your help regarding the error encountered during MIGO. Error M7172 "Serial Number management only allows whole number"
    Based from the PO posted, Matl X has 50ea order quantity, however, the material master is maintained with a Base unit of OZ,
    with this, conversion has been added to convert the EA --> OZ. and result will be 0.531OZ for the PO Qty in SKU.
    Known that decimal places is not possible in conjunction to Serial Number Management.
    May I just confirm if there could be settings that can be configured, so as to allow decimal values be used and assign serial number. Or is serial number should just be assigned per unit (meaning 1:1, one serial number per 1 whole value of uom)?
    Thank you.
    Bea

    You can not maintain Decimal values for Serial Numbers..

Maybe you are looking for