NEW SCI-FI CHANNEL

Is anyone else having trouble picking up sound for the new SCI-FI channel? I get a picture, but no sound on my DVR-equipped tv.

I'm having the exact same problem (on the same channel) on one STB, the other 2 are getting the sound just fine.
However, on one of the other STB's I lost the HISTORY channel altogether. I still receive it on the other 2 STB's.
Does anyone have any idea on how to correct these problems?
A solution would be greatly appreciated.
EXD

Similar Messages

Suggestions for new Sci-Fi on Vision

Hi Guys,
The Vision Programming Team have asked for Sci-Fi TV suggestions from Vision users, that we would like to see available via On Demand.
So, via an email from Mod DavidM, I was asked to start a new thread, because they want our feedback. And 'FRINGE' has now been added to the Sci-Fi category (via the 'Serious Lack of' thread). So they do listen!
So to kick off...my last post on the other, main Sci-Fi thread...
Sci-Fi I'd like to see on Vision...
The DUNE and CHILDREN OF DUNE TV mini series (original novels by Frank Herbert).
They are both donkey's years old (2000 & 2003) and so wouldn't cost that much to purchase.
Both mini series won numerous Emmy awards and were also rated as two of the top three highest-rated programs ever to be broadcast on the Sci-Fi Channel.
Battlestar Galactica. Both the TV mini series and the full TV series (the highest ever rated show on the Sci-Fi Channel), which Sky aired between 2003 - 2009. Pure quality.
Also, as another plus, none of the above have ever been aired on British terrestrial television. So lots of potential for new viewers.
Anyone else with any gems you would like to see?
Rank - Mostly Harmless.

Hi
I am loving Fringe and I really liked series one of The Legend of the Seeker so looking forward to Season 2 when its possible
I am a total Sci Fi freak as is the rest of my family here are a list of some of the stuff we have watched over the years and lately that we like.
Star Trek - any of the series ie Enterprise, any of the captains
Earth Final conflice
Buck Rogers
Science fiction theatre - old fashioned stories
V either the old or the New I have not seen the New actually
space 1999 - loved this when I was a kid not sure how it would look now
The bionic man / women used to be good
The Avengers
Lost in Space - probably not everyones cup of tea
Alien Nation - I was 50 50 on this one
Stargate any of the series watched them all and enjoyed them
Tales from the Crypt
Andromeda
Firefly
Quantum Leap
Dark Angel - this story line was different
The Outer Limits
Xena
Hercules
Sliders
Dr Who
Torchwood
The Twilight Zone
X Files
Just some of the good stuff out there for Sci Fi fans would love to see more of it On Demand
A successful man is one who makes more money than his wife can spend. A successful woman is one who can find such a man.
Lana Turner

Possible to create a new MainStage empty channel strip? (sans Rhodes!)

Is there any way to create a blank new software inst channel strip; i.e. without the EVP88+fx default setting? As it stands I have to use the "Reset Channel Strip" command everytime... totally annoying, especially since creating new channels and resetting them doesn't happen instantaneously.
mitchell sigman

I just tried it and it works fine.
Do this:
- Choose 'Reset Channel Strip' in the Settings popup at the top of a channel strip
- Choose 'Save Channel Strip Setting...' from the same menu and give it a name, like Empty
- In the Channel Strip Settings browser select the strip you just saved
- Use the Set as Default Channel Strip command
I followed these steps and I get an empty strip when I add a new SI strip or create a new patch with an SI strip. I'm assuming that you're resetting the strip to clear the plug-ins then immediately using the Set as Default command. This won't work since you haven't selected it in the settings browser first.

New BBC HD channels, signal strengh

Hi all,
Having an issue with the new BBC HD channels, all previous HD channels like ITV HD or BBC HD have a signal strength of 70% and quality of 100%. However the new channels are all signal quality 49-50% and quality 100%. The problem being that they cause my amp to drop out sound for a second and it happens quite often. Any reason why these channels are lower strength?

No they won't be 'turning the juice up'. The power is limited by the equipment they are using and the need to limit interference between transmitters on the limited number of channels they are using.
If your signal is marginal but Digital UK say you are in an area that should get the signal then I would suggest reviewing your aerial installation and seeing if it can be improved to increase your signal - for example your aerial May be the wrong group for the COM7 frequency.

Creation of new internal delivery channel using AQ

Hi,
I wanted to route one of Trading partner data to a different queue.(no want to use existing queues - IP_IN /IP_OUT queue).
This needs to create a new delivery channel using AQ in B2B.
I have gone thru the steps & entered all entries, but I am not able to find any queues created in B2B schema.
Do I need to create a queue using PL/SL in B2B to make it available as internal delivery channel or this setup itself will create a queue in B2B?
PFA the entirs:
for transport parameters
- transport server (B2B server IP)
- Protocol as AQ
-URI - b2b.<uri_name> (name of Queue, wanted to create)
- Hostname
- Port
-SID - b2b
-consumer - b2buser
- receiptient - null
-Polling interval - 6000
Transport server details:
Host name - (IP)
IP - Host IP
username -
Pswd - for B2B schema
Any pointers will be a great help.
Regards,
MS

As mentioned by TH in the above post, first thing is to create the data type that is used for messages - IP_MESSAGE_TYPE. This data type will already be present in the B2B database and could be reused.
For a new data type you could do the following.
==============================================================
Create a new data type using the following
==============================================================
create type IP_MSG_TYPE as OBJECT (
     MSG_ID VARCHAR2(128),
     INREPLYTO_MSG_ID VARCHAR2(128),
     FROM_PARTY VARCHAR2(512),
     TO_PARTY VARCHAR2(512),
     ACTION_NAME VARCHAR2(512),
     DOCTYPE_NAME VARCHAR2(512),
     DOCTYPE_REVISION VARCHAR2(512),
     MSG_TYPE INT,
     PAYLOAD CLOB,
     ATTACHMENT BLOB
Once you have created a new Data type ( or are reusing the existing data type), you need to create Queue Table that will hold the Outbound and Inbound message queues. The existing Queue table is "IP_QTAB" which can again be reused.
For new Queue table you could do the following
==============================================================
Create a new Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue_table (     queue_table => 'MY_QTAB',
                         queue_payload_type => 'IP_MSG_TYPE',
                         multiple_consumers => FALSE);
If you need to reuse the datatype change the queue_payload_type to 'IP_MESSAGE_TYPE'.
Once we have the Queue Table that will hold the queues, we need to add and start the queues that are to be used for the inbound and outbound messages.
==============================================================
Create the new Queues into the Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_OUT_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_IN_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_OUT_QUEUE', dequeue => TRUE, enqueue => TRUE);
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_IN_QUEUE', dequeue => TRUE, enqueue => TRUE);
If you are reusing the queue table IP_QTAB for creation of new queues, then reference that for the queue_table in above commands.
You need to reference the queue_name eg. B2B.My_OUT_QUEUE in the B2B UI screen.
Hope this helps.
AKT

New Center Ice Channel Issues

I'm glad you guys are giving us more HD channels for NHL Center Ice (long time coming - DirecTV has both the home and away feeds in HD), but all of the new ones are HORRIBLY scrambled/artifacted/pixelated. Please fix this.

Jeembo wrote:
I'm glad you guys are giving us more HD channels for NHL Center Ice (long time coming - DirecTV has both the home and away feeds in HD), but all of the new ones are HORRIBLY scrambled/artifacted/pixelated. Please fix this.
The HNL Center Ice HD channels are now in MPEG4 and appear to be on the same QAM channel. Often, a loose or corroded coax connector or bad splitter will impact a single QAM and cause what you're seeing. Another person complained about the same Center Ice experience you have on this forum, and was able to resolve the issue after checking and reseating all connectors and performing an STB autocorrection. Apparently the frequency ot the applicable QAM channel is more susceptible to interference or loss than others.
P.S. If you're addressing your comment to Verizon, you might remember that this is a peer-to-peer forum. Although Verizon may monitor it, they don't always reply to questions, especially lately and when there is already a thread on the same issue.

New Freeview Drama channel from July 8

Another free to air freeview channel from UK TV from July 8th
(Exzpectation is that they will use the slot that Dave-Ja-Vu is currenntly temporary broadcasting on)
http://corporate.uktv.co.uk/news/article/uktv-raises-curtain-drama/

Slay it's Freeview nothing to do with BTVision. It is aimed at an ABC1 audience according to the news release and therefore just our cup of tea,
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Why I haven't got the new Apple Tv channels

Apple from time to time adds new channels like FXNOW, Showtime Anytime, beats ..... etc. and today added 4 more channels.
anyway. I am just wondering why I haven't got any of them?
and why I only have few channels?
I have latest Apple TV software
Thank you

Thank you Ckuan for your replay

New BBC HD channels

Looking at the EPG on Youview it seems that real programs are listed from 7am/8;30am/7pm on Tuesday 10th December for the CBBC HD , Cbeebies HD ,BBC NEWS HD , BBC Three HD , BBC Four HD channels.

No they won't be 'turning the juice up'. The power is limited by the equipment they are using and the need to limit interference between transmitters on the limited number of channels they are using.
If your signal is marginal but Digital UK say you are in an area that should get the signal then I would suggest reviewing your aerial installation and seeing if it can be improved to increase your signal - for example your aerial May be the wrong group for the COM7 frequency.

New user - All channels not working/poor strength ...

Hi,
New installer, only getting around 20 channels when searching, and none of them work.
Signal strength fluctuates from 70% - 0%,Quality 20% - 0%
I have done lots of trial & error techniques, checked all cabling multiple times and thats fine, in bulit freeview on the TV searches, and finds all channels and has perfect picture quality, so its not the TV, now the weird thing is, I have tested BT vision box on another known working TV and BT vision works fine on that picks up all channels that its should and has 90% - 90%, so basically everything works fine, just BT Vision does not work on my main downstairs TV, any suggestions would be greatly appreciated!

Ok not quite enough info here to give a definitive answer yet.
You say you tested it on another TV in the same house from the same aerial feed?
Vision has two tuners as do all PVRs and needs therfore a stronger signal for it work and it sounds as though you might be on the borderline?
Can you give us more info please as to your exact set up?
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

New exclusive entertainment channel launching only...

Many people have been asking for BT to start supplying more (and exclusive) entertainment content. This looks like a first step in that direction backing up what Delia hinted at in her article...
http://tv.bt.com/tv/tv-from-bt/amc-to-launch-for-the-first-time-in-the-uk-exclusively-on-bt-11363986...
http://www.theguardian.com/media/2015/jun/14/delia-bushell-bt-tv-sport-gary-lineker-champions-league

Well it's a good enough addition to have me come back to BTTV
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Re-recording to a new track when original track has right channel off

I have a track and when the volume is off on the right channel, the guitar (right channel) is silent.
How do I bounce this track, with the guitar silent, to a new track so the guitar is no longer present in the recording?
I'm sure it's a routing issue from the original track to the new track, but can't seem to implement it.
Thank you

Try to do the following:
Make a new logic song.
Turn OFF universal trackmode, in your audio preferences.
Import your stereo audio track, and create two new mono audio channels.
drag the stereo audio file to the two mono audio files.
DONE.
if you then want to make a mono file from the channel without the guitar, export that file by itself, bounce it, or however you like to export audio regions.
Cheers

How to create new MTA channels for redirecting mail.

I have to forward a mail to faxserver.Faxserver has its own mail id on messaging server.When I send a mail to a user on my messaging server it should automatically be forwarded to faxserver user account.For that I need to make a new rule and channel.Please suggest me the way of writing rule/channel with an example.

"Faxserver has its own mail id on messaging server" What messaging server? The iMS machine, right? In which case then no you do not need a new channel.
The mail will be accepted, and once the final address is determined then the final domain and the rewrite rules will determine just what channel this message will leave via. It'll be either tcp_intranet or tcp_local is my guess.
As for creating a new channel. The manuals should have some examples of that. You could always use an existing one as an example. If you search through things that I've said on this site you'll find examples.

Why doesn't the new Willow channel work?

None of the new Cricket (Willow) channel content buttons seem to work. Why is that, please?

My error, Allan. The device is Apple TV. But with a closer look, I now see one has to register on Willow.tv for a $14.99 package in order to watch the cricket content. Thanks for your help.

Instrument Plugins No longer show up in the Channel Strip Area?

I’ve been working with Mainstage 3 quite extensively now.
OS X Version 10.8.5
It’s been incredible and I really love the program.
Just Today, I noticed the instrument plug-ins don’t show up in the
channel strip area. Only the Audio and Mide FX plugins.
I tried the View dropdown menu list options
Where it says “Hide Plugins” with a “V” shortcut only,
But it doesn’t change anything, either way.
I tried re-booting the computer. starting a new concert, new patch with channel strip, etc.
Luckily, everything I programmed still works, but I can no longer edit anything anymore.
So the instrument plugins are still working, but I don’t see them in the Channel Strip area.
Any help you can offer would be greatly appreciated!!

In edit mode, try pressing command>6(for future reference, command>5 toggles the screen control inspector).

NEW SCI-FI CHANNEL

Similar Messages

Maybe you are looking for