New screen fitted but not working?
ive recently fitted a new screen to my ipod 4th gen, and when ive gone to switch it back on the screen isnt lighting up, anyone know why
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem.
First I would take it apart and look for problems.
- Nextm take it to someone with more experience.
- Apple will not help
Similar Messages
-
Awww man got a new replacement ipod but not working!!
So recently i got a replacement from a nice guy for free and it was new i believe. So i plug it into my computer today, and i noticed that the screen wasnt responding! Help me please! Im always stuck on slide to unlock no matter what i do doesnt work, i tried sliding, nope i tried restarting, nope nothing will work!
Does it ask for a passcode? It does not sound like a new iPod since a new one would show the iTunes icon with a USB plug. You have to first connected a new iPod to your computer and activate it.
-
External screen detected but not working on DisplayPort connection on X220
I'm running up to date Raring on my Thinkpad X220 and stumbled upon weird problem.
I can connect to an external 24 inch DELL U2312HM external screen using DisplayPort cable.
I tried the same connection at work, with similar, but larger screen - 27 inch DELL U2713HM using the same cable.
When I check >>Settings >> Displays the display is detected. However I'm looking at dark screen.. Bizarrely - when I hit the PrtScr - I can also see it correctly with Ubuntu walpaper o_O
The monitor is detected and works correctly when using [DisplayPort to DVI-D Adapter Cable (Single Link)] however the resolution on this setup is limited to 1920 x 1200 so I'd really like to take advantage of DVI since the laptop should support it.
How could I fix this issue?Hello,
According to the specs on Dell's web site, the U2713HM is a WQHD (2560×1440) resolution display and requires a DisplayPort 1.2 compliant signal. From looking at the PSREF documentation, this resolution is supported on the DisplayPort at a frequency of 60Hz. There is no mention of DisplayPort version, though.
Just to confirm, the DisplayPort cable you are using is DisplayPort at both ends and does not have an HDMI or DVI connector attached to the monitor, correct?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
I want to transfer music from an old iphone to a new itunes library , but not working
I want to transfer music from an old iphone to a new itunes but its not working
If you backup with iTunes and you restored from the backup and the data are gone, then there is no where to retrieve them from unless you have another backup that contains those data.
Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
If you see a recent backup that you are certain contains the data that you need, recover deleted data from iPhone backup.
If your note is gone from iCloud.com there is only a few ways to possibly recover it.
The first things I would check is a iCloud Backup, a iTunes Backup, or a 3rd party email that may have contained the note. To restore from a iCloud or iTunes backup follow this link. This article explains how to restore a device from either back up.
Note if you have backed up since the note went missing, you will not have the note on the backup. Make sure you do not back up if trying to restore from a back up as this will back up the content without the note.
To get to the "Set up assistant" on an iOS device, you must go to Settings>General>Reset>Erase All Content and Settings. Once the phone restarts, you will be at the "Set up Assistant" -
I've been keeping my passwords in an application called 1Password. I was assured (by a knowledgeable user, not by anyone official) that when I upgraded to Firefox 5.0, the 1Password addon would be updated ... But that doesn't seem to have happened. As I rely on 1Password to track my passwords, this is a problem.
Take it back to the place that installed the battery and ask them to check their installation.
-
one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....
Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G. -
Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?
Did you install Flash Player?
http://get.adobe.com/flashplayer/ -
Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please
Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change. -
my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best. -
Good day,
I get a grayish screen when I access internet via my Ipad. The touch screen is also not working but only with internet. How do I fix that?
thank you
mélanieI have the same problem! Can anyone help us? Thanks!!
-
Android kitkat issue in loading swf file from device. URL found but not working
Hi,
I am facing one issue from a very long time regarding file access in Android Kitkat version 4.4.*. I have developed Adobe Air player application for android and it is working as expected below kitkat version but not on kitkat.
I am following this methods -
NativeApplication.nativeApplication.addEventListener(InvokeEvent.INVOKE, onInvoke);
public function onInvoke(event:InvokeEvent):void
var newFile:String = String(event.arguments[0]);
trace("Received new file from Android: "+newFile)
Received URL form device in Android Kitkat -
/storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Animation/27 031_1_Welcome screen.swf
file:////storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Anim ation/27031_1_Welcome screen.swf
- Loading this URL using loader class in AS3 AIR but not working.
file%3A///storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Ani mation/27031_1_Welcome%20screen.swf
- Have used also by doing escape character but still it is not working showing file not found both SWF and mp4 case. (Mp4 case NetStream.Play.FileNotFound)
By using the above methods I can have swf or mp4 video url but when I am loading it, It is not working giving error message "File not found/ IO Error". I have read that if use escape character then it will work but I have used escape character also but it is not working.
Humble request you to please advise how can I solve this issue.
Best regards,
Sunil KumarStarting in KitKat, Google requires that applications have permission to access files on the system. You must specifically add either the READ_EXTERNAL_STORAGE or WRITE_EXTERNAL_STORAGE permissions in order to access files. Adding either one of those permissions should let you read/access files on the device. Prior to KitKat, you didnt have to have these permissions listed in the manifest to access files.
-
New Applications model DOES NOT work with StandAlone OSD media
If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
- The creation of the media will be successful
- The application installation itself will be successful
Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
causing the task sequence to error out..
Thanks,
Squirre1It is very similar to this description:
http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media. -
After installing lion, my screen saver does not work
I installed lion, now my screen saver does not work. I have tried all the hot corners, nothing. Dashboard and mission control work fine but cannot start screen saver.
Any thoughts on what might be wrong.kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.pf (4.2.1f7)
com.symantec.kext.ips (3.2f8)
at.obdev.nke.LittleSnitch (2.4.0)
com.symantec.kext.filesecurity (1.4.3f19)
com.symantec.kext.fw (1.0.3f5)
com.symantec.kext.SymAPComm (11.2.2f3)
#2:
Password:
com.wdc.drivemanagerservice
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-3.plist
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.deepsight-extractor
com.symantec.avscandaemon
com.microsoft.office.licensing.helper
com.adobe.versioncueCS3
at.obdev.littlesnitchd
#3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
com.symantec.uiagent.application
com.epson.epw.agent
at.obdev.LittleSnitchUIAgent
at.obdev.LittleSnitchNetworkMonitor
uk.co.markallan.clamxav.freshclam
uk.co.markallan.clamxav.clamscan
com.macpaw.CleanMyMac.helperTool
com.google.keystone.user.agent
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716
#4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
iGlasses.component
/Library/Extensions:
/Library/Frameworks:
.dat1bf4.00c
AECore.framework
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
Compressor.framework
DSPPublishing.framework
EWSMac-GC.framework
EWSMac.framework
FxPlug.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
MediaServerAPI.framework
Motion.framework
NyxAudioAnalysis.framework
PluginManager.framework
PrintMeSSL.framework
ProFX.framework
ProMetadataSupport.framework
Qmaster.framework
TSLicense.framework
XSKey.framework
/Library/Input Methods:
/Library/InputManagers:
Ecamm
/Library/Internet Plug-Ins:
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
NPSVG3.zip
NPSVG3Carbon
NPSVG3ReadMe.html
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchNetworkMonitor.plist
at.obdev.LittleSnitchUIAgent.plist
com.epson.epw.agent.plist
com.symantec.uiagent.application.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.versioncueCS3.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.Sched501-3.plist
com.symantec.avscandaemon.plist
com.symantec.deepsight-extractor.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
com.wdc.drivemanagerservice.plist
/Library/PreferencePanes:
Apple Qmaster.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
VersionCue.prefPane
VersionCueCS3.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymConfidential.framework
SymDaemon.framework
SymFirewall.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymPersonalFirewall.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
SymWebKitUtils.framework
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
Motion.component
iChatTheaterPreview.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
SymWebKitUtilsSL.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iMovie.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
AdobeVersionCue
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
ATBas
ATBraIro
ATBroScr
ATChe
ATIsa
ATMcCol
ATRap
ATUnc
Arial
Basque, etc.
Branding Iron, etc.
Brush Script
ClearGotBolDTC
ClearGotExtBolDTC
ClearGotLHBla
ClearGotLHBol
ClearGotLHLig
ClearGotLHMed
ClearGotLHRom
ClearGotMTBol
ClearGotMTDemBol
ClearGotRegDTC
ClearITCbyBTBla
ClearITCbyBTBlaIta
ClearITCbyBTBol
ClearITCbyBTBolIta
ClearITCbyBTCon
ClearITCbyBTHea
ClearITCbyBTHeaIta
ClearITCbyBTReg
ClearITCbyBTRegIta
Clearface Bd BT
Clearface Blk BT
Clearface BlkIt BT
Clearface Ctr BT
Clearface Gothic A
Clearface Rg:Hv BT
Clearface.ttf
ClearfaceGothic ExtraBold DTC
ClearfaceGothic Regular DTC
ClearfaceGothicLH Bold
Clearface_Gothic_MT_Bd MT
Clearface_Gothic_MT_Dm_Bd MT
Clearly Gothic Light.ttf
Clearly Gothic.ttf
EmbasBTReg
Embassy BT
FIRESTARTER.TTF
FLAMER.TTF
Firecat.ttf
Flame.ttf
Flames.ttf
Redd Or Dedd.ttf
SEAWFA__.TTF
Smokteq.ttf
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
chp-fire.ttf
encodings.dir
fonts.dir
fonts.list
fonts.scale
scythe.ttf
Library/Frameworks:
EWSMac-GC.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Move-Media-Player.plugin
WebEx64.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.B6A794DC-82A7-47AB-9171-208 B8AEB5B61.plist
com.apple.SafariBookmarksSyncer.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.helperTool.plist
com.zeobit.MacKeeper.Helper
uk.co.markallan.clamxav.clamscan.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
MouseLocator.prefPane
#5
osascript -e 'tell application "System Events" to get name of every login item'
2012-03-17 18:58:32.172 osascript[669:8703] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
osascript: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
I hope I copied these correctly.
Maybe you are looking for
-
ITunes 12: use 'Artist' name in "Artists view" rather than 'Album Artist'?
I.e. if I have an album with artist name X and album artist name Y it seems to sort by Y (the album artist name) in "Artists" view (i.e. the one with the pictures on the left)-is there a way to make it use the artist name (X) instead? Say artist is "
-
Increase row height of a configurable table
Dear SCN members, This is related to a configurable table realized using <chtmlb:configTable>. Please let me know about the following possibilities with this: 1. Is it possible to increase the row height of this table? 2. The content of a given cell
-
How do I use copylocale.exe correctly?
Hi, I've been trying to use copylocale with to add another locale (say fr_FR or es_ES). I went to the bin/ directory and gave the command copylocale.exe en_US es_ES This created the .swc files in the framework/locale/es_ES directory. Also, it created
-
Need advice how to install pse 9 on a new pc.
I HAVE A NEW PC & WANT TO INSTALL MY PSE 9 ON IT, I CAN GET TO THE PRODUCTS I HAVE PURCHASED IN MY ACCT. BUT CANT SEEM TO D/LOAD THEM. any one got help please. Thanks
-
How to create new KM "Entry Point"
Hi Could someone guide me how to create a new Entry Point (Note:Not the PCD navigation entry point) "An entry point provider makes one or more folders available as links that you can access from a central point" Thanks Rocky